Stratosphere- Problem with Screen Capture and Group Text Reply

I have a problem with the side button that locks/unlocks the phone. I don't know why it happens but sometimes when I press the side button to lock the phone it takes a screen shot and send its to my Gallery under the folder ScreenCapture. I can't figure out why it does this sometimes, and when i want to actually take a screen shot I cant.
Anyone know how exactly you can take a screen shot?
Another question i have is with Group Texts. Is there a way to reply all when I receive a text that was sent to multiple people or can I only reply to the sender?
Hope someone can help thanks!

Hello kfeatherstone! I can provide you with instructions for taking a screenshot:
1. Press both the Power and Home buttons briefly.
2. You should hear a “click” sound and the screen will say “Screen captured. Saved as image file
In regards to your messaging, "reply to all" is not an available option. I hope this information helps!
ChaunceyM_VZWSupport
Follow us on twitter @VZWSupport

Similar Messages

Problems with tethered capture and the 4.2 update

I'm having problems with tethered capture and my canon 1ds mark III since I updated to 4.2. Is anybody else having issues with tethered capture that was working fine before the update?

http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=4.2+tethering

Problem with Video Capture, and question towards solution

Yesterday I worked on a commercial for which we captured 9 clips (roughly 10 seconds or shorter in length). The clips all had text/titles superimposed on them by an outside machine and looked good in the monitors when they were exported and captured into FCP (ie: none of the text was chopped off).
I edited the commercial and then was exporting it out, only to discover that the text on the bottom of the clips was getting chopped off.
My first question is this: is there some setting in the capture process that could have done this? something that might have gotten tweaked accidently, or corrupted in some manner? Didn't have this problem with footage captured the previous day. And since it looked good before it was put into FCP, thinking it had to be a problem with FCP.
Also, in trying to tweak the footage in FCP, I came across a 'there must be an easier way to do it' question. Is there a way to alter parameters on multiple clips (such as raising them, like I had to)? I tried selecting all and double clicking, hoping that the changes I made would affect them all, but it only affected the one I directly clicked. I'm sure there's something simple (and obvious) that I'm overlooking...
thanks!

For how and why this could have happened, would you mind sharing your capture and sequence settings?
As far as applying parameters to multiple clips, I think you can make use of the Paste Attributes function in FCP...
Alter one of your problematic clips
Select that clip in the Timeline, then press Command-C (or control-click and choose Copy from the contextual menu)
Select the remainder of your problematic clips
With your clips selected press Option-V (or control-click on one of them and select Paste Attributes from the contextual menu) to bring up the Paste Attributes dialog
Select Basic Motion - under the Video options, on your left-hand side - then click OK
(Basic Motion because, if I understand your solution correctly, you altered the Center property - either in the Motion tab of the Viewer or manually in the Canvas - of your clips. You nudged them all up a bit, right? If you did, then that would fall under the Basic Motion attribute.)
All your selected clips should be nudged up appropriately.
But, again, I'm making a bit of leap since I'm not entirely sure what caused your issue in the first place.

Problem with Creative Cloud and Arabic Text

We are currently testing illustrator CC and would be moving from CS5 Middle Eastern Version
We have installed CC using the lanuage setting English Arabic
And we can add text to files in arabic so all good
However if we open a file created in CS5 ME the arabic text displays as blocks. The font used is myriad pro
Is there a way to correct this ?

The best bet is to keep both and open the file in the appropriate version. With the changes in the text engine it will always be a problem.

Anyone having issues with iphone 5 having issues with screen freezing and cant text

Screen is freezing, when texting it deletes the characters automatically as well

Would it matter if others were?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problems with screen tilting and zooming

I've been using my touch for web browsing quite a bit.
One persistently annoying problem I keep having is switching between the touch and other devices. The problem is not unique to any platform. It happens on my iMac at home and the XP laptop at work.
Whenever I browse an web page on my touch I do things like:
- double tap to zoom text to just the right size
- flip the device back and forth between horizontal and vertical to make whatever content I'm looking at fit the screen better.
Overall, I'm very pleased with web viewing on the touch, but whenever I view web content on my iMac or PC, I keep having issues:
- double tapping on the screen doesn't work. I usually remember that it isn't a touch screen and use the mouse, but double clicking ona web page never does anything but select text or open a new page.
- flipping the iMac or XP laptop on its side doesn't seem to have any effect on things inside the machine, but frequently has disruptive effects on the surroundings. The XP laptop has so many cables plugged in that when I grab the screen & rotate I inevitablly disconnect something or yank the speakers off the desk. It just plain doesn't work on the iMac as there really isn't any room on my desk. I think I'll go check Ikea's web site for firmware updates on the desk.
It just seems like the iMac and PC aren't working in a natural way like the touch. I have noticed it usually happens right after I'm using my touch. Maybe I should update the firmware on the iMac or PC? Has anyone had the 1.1.2 update show up for their iMac or PC? (or desk?)
Is anyone else having these issues?

Hi and welcome to the discussions!
I agree with Barbara. That is unacceptable.
Did they have you try to create a new user account or perform an archive and install? If the problem happens in all apps, or when just the Finder is open, it is either an OS issue, or more likely a hardware problem such as bad video on the midplane. An archive and install or creating a new users account can help eliminate software as a possibility and are two of the steps that Apple almost always suggests when their is odd behavior similar to what you describe.
Also, try shutting down and unplugging all cables fromyour iMac - including the wall - for 15 minutes. Then plug in the power cord while simultaneously pressing and holding the power button on the back of the computer. Let go of the power button and press the power button once more to start up your iMac. That would reset the SMU.
Another thing to try before calling them again is to reset the PRAM.
- Shut down the computer.
- Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
- Turn on the computer.
- Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
- Hold the keys down until the computer restarts and you hear the startup sound for the second time.
- Release the keys.
Your computer's PRAM and the NVRAM are reset to the default values. it might reset date and time settings, but that is not fatal.
I honestly do not think that any of what I suggest will make a difference, but it will eliminate a great number of possibilities. I think it is either a bad backlight or bad video, but that is just a guess.
Give those a shot and call Apple back. Then you can tell them what you have done and they will probably recommend that you take it in to an Apple repair center for further diagnostics.

Problem with screen capture

The first problem is I successfully captured a video from my DV camera, but when I put the second tape in to continue, it can't find the camera again. I've re-booted but nothing worked.
Any suggestions?

And which program? In any case, ask such usage related questions in the product specific forum.
Mylenium

Audio sync problem with screen capture/gameplay video from Bandicam, converted by Freemake.

I recently purchased the student discount for Adobe creative cloud which gave me access to Premiere Pro CC which I've been using to edit my YouTube videos.
I use a popular recording software called Bandicam to record my PC gameplay. Bandicam like many other software's allows me to record my commentary OVER the gameplay. When I play back the recorded video in windows media viewer the audio and gameplay are in complete synchronization. I then use Freemake Video Compressor to convert the recorded gameplay from an AVI file to an MP4 file. Then I import that file into the latest version of Adobe Premiere Pro. When I play back the video during editing, the audio and video appears out of sync by about five seconds.
Like I said, I don't record my gameplay and audio separately like some other people, so it can't possibly be an editing mistake. I've tried dozens of different editing software's (all free crappy ones) and everything is fine. This issue only occurs with Adobe Premiere Pro. I have installed the latest update of the program and have just recently tried re-installing it as well. Nothing seems to work for me, or for the many, many people who I have seen in random forums all over the net with this same problem. It appears to be an issue that isn't only happening to me.
Due to this issue, I'm very behind in my YouTube schedule. Apologies if this is rather long, I just want to get what I paid for.
Thanks for taking the time to read and respond
~ Alessio Marin
=================================================
Title edited by moderator to make it descriptive of the problem.

Premiere cannot handle clips with variable framerate.
Your converted clips need to have constant framerate.
Otherwise use a converter like Handbrake.

Problems with screen freezing and going blank...

Yesterday I was looking through photos that I had loaded on to my mac book (which I have looked through before and not had any probems) when all of a sudden everything froze and a spinning colour wheel appeared on the screen. I couldn't click on anything at all, I treid to quit the programmes that were not responding but this made no difference and I ended up having to hold down power button and restart. Everything was fine when I switched it back on until today, I was using safari, I didnt touch the screen for a few minutes so the screen went black, which it usually does but normally when I click it goes to the log in screen but this time it was just a black screen nothing happened when I clicked there was just a cursor on the screen?? after about 30 seconds it went back to the usual screen! Obviously this isn't normal but I just wondered if its serious or maybe just something silly that happens sometimes???

You got it in July? Then you should still be able to get a new/replacement iPod if you have to. You wouldn't return it to the store, you would send it to Apple itself. You should try resetting it and then try recharging again. And you should install the CD that came with the iPod. If you already did, you should update it (the iPod software).

Problem with video capture and transmission

Hello..
I have written an application to capture video using a webcam and transmit it using RTP URL..It did work..
When the user wishes to stop capturing i would stop the processor and deallocate it.. If the user wishes to start capturing again i would just start the capturing process once again(using the same procedure i followed the first time)..
When i do this i get an exception stating:
The capture device is already in use..
Cannot create the RTP Session: Can't open local data port: 5000
(Note: I used the same port for transmission for the first time)
Is there anything that is needed to be done to release a device and port at the end of the program..
Thanks in advance!!

Thanks.. The problem was solved when i closed the processor and its data sources..
One more doubt.. Isnt it possible to transmit and receive Images through RTP..
When i try to create a Processor for and image located in my system "E:\image.jpg" i get an exception like :
Cant create Processor for "E:\image.jpg"..
Thanks for the reply!!!

Problem with document capture and UCM

Sorry, this is my first post in here and i don't know if this is the right place for that.
i'm trying to configure the commit driver in Oracle Document Capture but when i push the button i get this msg. "error creating the Capture-UCM Implementation Object"...
i don't understand why this is happening, helllppppp...
pd: Sorry 4 my english i'm from venezuela
Disculpen, es mi primera vez escribiendo en este foro y con lo grande que es no estoy seguro si pertenece a esta sección del mismo. Estoy teniendo problemas al tratar de configurar el Driver de Commit en Oracle Document Capture, al momento de pisar el boton de configurar obtengo el siguiente mensaje: "error creating the Capture-UCM Implementation Object"... si alguien sabe porque es este inconveniente cualquier ayuda me seria de mucha utilidad... Gracias de antemano

Hi,
Yeah UCM is up and running in the server,
here u have a screenshot
http://img580.imageshack.us/img580/5640/errort.jpg
i can't even configure the setting's driver, in fact this error appears trying to do it..
thanks.....
PD: here a screenshot from UCM running on server
http://img576.imageshack.us/img576/6042/ucmw.jpg
Edited by: user13071401 on 28-jun-2010 6:47

Problems with screen, keyboard and trash when logging in?

Hey. When I restart or turn on my mac the login screen pops up, as per normal, but for some reason the screen is really dim, like only 4 squares dim, and so is the keyboard. I thought it was the ambient light sensor because I'm usually in a well lit room but I tried it in a dim room and the same thing happened. When I log into my account, it doesn't change and I have to push the the F2 and F6 keys so the screen and keyboard is at max. What do I do to stop this from happening? Also, the trash always has this folder called "recovered files" in it. Where does it come from? And how do I stop it from appearing? Thanks in advance!

Hi Fonzo
For backlight functions not working correctly try an SMC reset (http://support.apple.com/kb/HT3964), read the instructions through carefully before attempting.
As for Recovered files:
One or more Recovered Files folder may appear in your Trash after restarting your computer. The recovered files are temporary files used by Mac OS X applications. Usually temporary files are deleted by an application when it no longer needs them. If an application quits unexpectedly, the temporary files may not get deleted by the application. When you restart your computer, Mac OS X moves these temporary files to the Trash.
You can retrieve useful files by dragging them out of the Trash. In most cases, however, the temporary files are not important and it is safe to empty your Trash. Check with the manufacturer of the application if you are not sure.
J.C

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Problem with Nokia Camera and Smart Sequence

Hi,
I'm having a problem with Nokia Camera and the Smart Sequence mode.
Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera".
Well, if I take a pic using the Smart Sequence mode, it just doesn't say "open in nokia camera" so, to use the functions of smart sequence (best shot, motion focus, etc), I have to open nokia camera, go to settings and tap the "Find photos and videos shot with nokia camera" option.
Does anyone has the same problem? Anybody solved it?
I already tried reinstalling nokia camera, but that didn't help.
I'm running Nokia Black on my 925.
Thanks everyone!

Hi,
I had the same problem with my 1020. It did get fixed with the last update to Nokia camera.
However, IIRC, it didn't just happen right away. When browsing the camera roll I'm pretty sure that the "open with Nokia camera" text wasn't there.
Slightly disappointed I opened the (Nokia) camera anyway and was going to test the smart sequence again. I noticed the only precious pic I'd taken using this actually appeared top left of the screen.
I opened it and I had all the smart sequence editing options again - that we're missing previous. Made a new picture and saved it.
Now when in camera roll the text shows below the image and all is good.
This probably doesn't help much except that it didn't seem to fix automatically.
I work @Nokia so I can ask around a bit to see if this is a known / common issue (not that I know any developers)

Stratosphere- Problem with Screen Capture and Group Text Reply

Similar Messages

Maybe you are looking for