Streaming .FLV files from Media Server 4.5 using PHDS

I would like to stream .FLV files from adobe media server 4.5.
Requirements state that the files should be considered secret, so I decided that PHDS sounds like the
right thing.
I was able to stream an .FLV by placing it in the webroot/vod folder using an url like http://myserver/vod/test.flv
However the developer manual states that a way to enable PHDS at the server level is to uncomment the two lines like this.
<IfModule jithttp_module>
<Location /hds-vod>
 HttpStreamingJITPEnabled true
 HttpStreamingContentPath "../webroot/vod"
 JitFmsDirPath ".."
 Options -Indexes FollowSymLinks
# Uncomment the following directives to enable encryption
# for this location.
 EncryptionScope server
 ProtectionScheme phds
</Location>
</IfModule>
However I am not able to stream my FLV using url like http://myserver/hds-vod/test.flv
Question : Am I supposed to use the hds-vod in the URL or is /vod doing the same ?
 Is the approach correct, or should the files go into an applications\myapplication\media folder ?
 I will need some server side actionscript to validate access to the stream, is that possible without a dedicated application ?

Hi,
When you use the vod location directive you're basically using Progressive download so your URL is as : http://myserver/vod/test.flv
However, when you use the location directive hds-vod, it is HTTP Streaming, where the fragments are created on the fly. For this your URL needs to be as : http://myserver/hds-vod/test.f4v.f4m
Please note .flv files are not supported for HTTP streaming (via hds-vod location directive). You cannot use PHDS with .flv files.
Thanks,
Apurva

Similar Messages

How to stream flv files from a diffferent directory outside the applications folder

Hi everyone,
I want to stream the flv files from a different location
stored in the hard disk, which is outside the applications folder
in the FMS installation root directory. Does anyone know how to do
it?
Regards,
Diptanu

VOD changes won't help him, he said outside the applications
folder. According to adobe any new vod folders must be in the
applications folder, hence virtually worthless for most purposes. A
better question may be, how do you specify a folder on a different
local hard drive. I wish adobe wouldn't make it so complicated, it
should be a really simple matter.

Deleting file from application server

can any one tell me how to delete file from application server?

Hi,
Use statement
delete dataset 'tmpfile.txt'.
\tmp\file.txt is the file path on application server which you want to delete.
Regards
Sailaja.

Problem while reading the file from FTP server

Hi Friends,
I have a problem while fetching files from FTP server.
I used FTP_Connect, FTP_COMMAND function modules. I can able to put the files into FTP server.
but I cant able to pick the files from FTP server.
anyone have faced similar issues kindly let me know.
Thanks
Gowrishankar

Hi,
try this way..
for reading the file using FTP you need to use different unix command ..
Prabhuda

Video Freezes when overriding flv files on FMS server

I have an flash application that captures a web cam video stream and stores it on the FMS server.
I notice when I create a brand new video, and store it on my FMS server, it works fine.
When I make another video and my application overrides the file with the new video, this is where I get problems.
When I download the flv file from the FMS server, and I play it locally it plays fine, but the timeline is weird.
The web player freezes the video during that first 15 seconds.
A 30 second video, will have a time line of like 45 seconds, the local flv player is smart enough to skip over the paused part of the video.
You will see it skip over the timeline to the good video (from 0sec to 15 secs). The web player freezes the video during that first 15 seconds.
Any clues that I described that makes you know what is going on?

Great that gives me a big clue, which asc file do you think I need to look in?
/mnt/applications/livepkgr/main.asc
/mnt/applications/multicast/main.asc
/mnt/applications/live/MemberClips/MemberClips.asc
/opt/adobe/fms/samples/applications/vod/main.asc
/opt/adobe/fms/samples/applications/livepkgr/main.asc
/opt/adobe/fms/samples/applications/multicast/main.asc
/opt/adobe/fms/samples/applications/live/main.asc
/opt/adobe/fms/scriptlib/framework.asc
/opt/adobe/fms/scriptlib/webservices/XMLSchema.asc
/opt/adobe/fms/scriptlib/webservices/SOAP.asc
/opt/adobe/fms/scriptlib/webservices/Namespace.asc
/opt/adobe/fms/scriptlib/webservices/ServiceManager.asc
/opt/adobe/fms/scriptlib/webservices/XMLSchemaDataTypes.asc
/opt/adobe/fms/scriptlib/webservices/Log.asc
/opt/adobe/fms/scriptlib/webservices/XMLUtil.asc
/opt/adobe/fms/scriptlib/webservices/SOAPConstants.asc
/opt/adobe/fms/scriptlib/webservices/WSDL.asc
/opt/adobe/fms/scriptlib/webservices/WebServicesClass.asc
/opt/adobe/fms/scriptlib/webservices/WSDLConstants.asc
/opt/adobe/fms/scriptlib/webservices/WebServices.asc
/opt/adobe/fms/scriptlib/webservices/XMLSchemaConstants.asc
/opt/adobe/fms/scriptlib/netservices.asc
/opt/adobe/fms/scriptlib/application.asc
/opt/adobe/fms/scriptlib/facade.asc
/opt/adobe/fms/applications/MemberClips/MemberClips.asc
/opt/adobe/fms/documentation/samples/livestreams/main.asc
/opt/adobe/fms/documentation/samples/StreamLength/main.asc
/opt/adobe/fms/documentation/samples/HelloWorld/HelloWorld.asc

[HELP] Download file from FTP server

hi,
I want to write a java program that can download and upload files from ftp server. Currently I only manage to upload a file to ftp server but i cant download file from ftp server. Here is the source code that only allow user to upload file. Anyone can give me some guidelines so that my program can download and also upload file? thx.
import java.io.*;
import java.net.*;
public class FTPUpload {
private static final int CTRLPORT = 21;
private static Socket ctrlSocket;
private static PrintWriter ctrlOutput;
private static BufferedReader ctrlInput;
private static byte[] localHostAddress;
public final static String DIR = "C:\\zip\\";
public static void main(String[] args) {
try {
String host = "192.168.1.1";
String loginName = "testuser";
String password = "password";
String dirName = "/home/testuser";
String fileName = "hello.zip";
ctrlSocket = new Socket(host, CTRLPORT);
localHostAddress = ctrlSocket.getLocalAddress().getAddress();
ctrlOutput = new PrintWriter(ctrlSocket.getOutputStream());
ctrlInput = new BufferedReader(new InputStreamReader(ctrlSocket.getInputStream()));
ctrlOutput.println("USER " + loginName);
ctrlOutput.flush();
ctrlOutput.println("PASS " + password);
ctrlOutput.flush();
ctrlOutput.println("CWD " + dirName);
ctrlOutput.flush();
ctrlOutput.println("TYPE I");
ctrlOutput.flush();
FileInputStream fis = new FileInputStream(DIR + fileName);
Socket dataSocket = dataConnection("STOR " + fileName);
OutputStream outstr = dataSocket.getOutputStream();
int n;
byte[] buff = new byte[1024];
while ((n = fis.read(buff)) > 0) {
outstr.write(buff,0,n);
dataSocket.close();
fis.close();
ctrlOutput.close();
ctrlInput.close();
ctrlSocket.close();
}catch (Exception e) {
e.printStackTrace();
private static Socket dataConnection(String ctrlcmd)
throws IOException,UnknownHostException {
String cmd = "PORT ";
ServerSocket serverDataSocket = new ServerSocket(0,1);
for (int i=0;i<4;i++) {
cmd = cmd + (localHostAddress[i] & 0xff) + ",";
cmd = cmd + (((serverDataSocket.getLocalPort())/256) & 0xff)
+ ","
+ (serverDataSocket.getLocalPort() & 0xff);
ctrlOutput.println(cmd);
ctrlOutput.flush();
ctrlOutput.println(ctrlcmd);
ctrlOutput.flush();
Socket dataSocket = serverDataSocket.accept();
serverDataSocket.close();
return dataSocket;
}

Or just use a java.net.URL("ftp://...) ..., get its input stream, and away you go ...

The dialog box open twice when open file from the server

I use the following code to download/open file from the server:
<%
String filename = "MengxianhuiDocTest.doc";
String filepath = "D:\\";
response.setContentType("APPLICATION/OCTET-STREAM");
response.setHeader("Content-Disposition",
??attachment; filename=\"" + filename + "\"");
java.io.FileInputStream fileInputStream =
new java.io.FileInputStream(filepath + filename);
int i;
while ((i=fileInputStream.read()) != -1) {
out.write(i);
fileInputStream.close();
out.close();
%>
If the application runs, the Open or Save dialog box display.When I select open the file,
the dialog box will display twice.
Pls help me.
Thanks.

thx
but I tried it and it did't work.
The dialog box also display twice.

How to protect your .flv files on a server?

So I have a .swf which references playback of some .flv files on my server....Is there a way to protect these .flv files from access through any means other than with the .swf controls I have created? Currently I can simply type in the url location of the .flv files and download them completely circumventing the .swf if I so choose, which is not really how I would like them to exist...
I would far prefer that they are only accesible through the .swf.
Is there any way to do this....I know it's not a Dreamweaver specific question, or at least I don't think it is...but I would be interested in any thoughts.
Thanks,
James Hooey

Lynda.com uses either Quicktime or Flash...they added Flash playback of movies within a new Flash Player around a year ago. I'm a member of Lynda and use their services all the time.
When I was trying a flash grabber it was on these Flash based tutorial videos.
Just thought you would like to know that Lynda does have a Flash option and the grabber does not work with it.
My initial question is not in any way about me grabbing or copying Flash movies anyway, but rather that I want to protect my own Flash based movies on my own website.
Thanks,
All the best,
James Hooey

Uploading xml file from application server

HI everybody guys having promblem reading xml file from application server.Here is the solution. the sample program is below.
TYPE-POOLS: ixml. "iXML Library Types
*TABLES : rbkp.
 TYPE DECLERATIION
TYPES: BEGIN OF type_tabpo,
 ebeln TYPE ekko-ebeln, "PO document number
 ebelp TYPE ekpo-ebelp, "PO line item
 END OF type_tabpo.
TYPES: BEGIN OF type_ekbe,
 belnr TYPE rbkp-belnr, "Invoice document
 gjahr TYPE rbkp-gjahr, "fiscal year
 END OF type_ekbe.
TYPES: BEGIN OF type_invoice,
 belnr TYPE rbkp-belnr, "PO document number
 gjahr TYPE rbkp-gjahr, "Fiscal Year
 rbstat TYPE rbkp-rbstat, "invoice status
 END OF type_invoice.
TYPES: BEGIN OF t_xml_line, "Structure for holding XML data
 data(256) TYPE x,
 END OF t_xml_line.
 INTERNAL TABLE DECLERATIION
DATA: gi_tabpo TYPE STANDARD TABLE OF type_tabpo,
 gi_ekbe TYPE STANDARD TABLE OF type_ekbe,
 gi_invoice TYPE STANDARD TABLE OF type_invoice,
 gi_bapiret2 TYPE STANDARD TABLE OF bapiret2.
DATA: l_ixml TYPE REF TO if_ixml,
 l_streamfactory TYPE REF TO if_ixml_stream_factory.
 l_parser TYPE REF TO if_ixml_parser,
 l_istream TYPE REF TO swif_ixml_istream,
 l_document TYPE REF TO if_ixml_document,
 l_node TYPE REF TO if_ixml_node,
 l_xmldata TYPE string.
*DATA: l_elem TYPE REF TO if_ixml_element,
 l_root_node TYPE REF TO if_ixml_node,
 l_next_node TYPE REF TO if_ixml_node,
 l_name TYPE string,
 l_iterator TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table TYPE TABLE OF t_xml_line, " XML Table of the structure
 l_xml_line TYPE t_xml_line, " Record of structure t_xml_line
 l_xml_table_size TYPE i. " XML table size
DATA: l_filename TYPE string.
 WORK AREA DECLARATION
DATA: gw_tabpo TYPE type_tabpo,
 gw_ekbe TYPE type_ekbe,
 gw_invoice TYPE type_invoice,
 gw_bapiret2 TYPE bapiret2.
 BEGIN OF SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: p_file TYPE pathintern LOWER CASE DEFAULT '/usr/sap/tmp/'.
Validation of XML file: Only DTD included in XML document is supported
SELECTION-SCREEN END OF BLOCK blk1.
INTIALISATION.
INITIALIZATION.
SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN.
To validate p_file is not initial
PERFORM sub_validate_file.
PERFORM sub_validate_path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Request for filename for xml file from the application server
PERFORM sub_get_filename_appl USING p_file.
START OF SELECTION SCREEN
START-OF-SELECTION.
PERFORM sub_fetch_po_details.
PERFORM sub_get_invoice.
PERFORM sub_rel_invoice.
END OF SELECTION SCREEN
END-OF-SELECTION.
*& Form sub_validate_file
 To Validate the file
FORM sub_validate_file .
IF p_file IS INITIAL.
 MESSAGE e000. "specify the file path
ENDIF.
ENDFORM. " sub_validate_file
*& Form sub_get_filename_appl
form sub_get_filename_appl USING l_fname TYPE any.
DATA: l_fname TYPE filename-fileintern. " File name
*GET THE FILENAME FROM THE APPLICATION SERVER
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
 EXPORTING
 directory = l_fname
 filemask = '*'
 IMPORTING
 serverfile = l_fname
 EXCEPTIONS
 canceled_by_user = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " sub_get_filename_appl
*& Form sub_fetch_po_details
 To fetch the PO details from the application server
 Format of file is XML
FORM sub_fetch_po_details .
 TYPE DECLERATIION
l_ixml = cl_ixml=>create( ).
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
PERFORM get_xml_table.
LOOP AT gi_tabpo INTO gw_tabpo.
 WRITE:/ gw_tabpo.
ENDLOOP.
ENDFORM. " sub_fetch_po_details
*& Form get_xml_table
 Read from the xml file
FORM get_xml_table .
Local variable declarations
DATA: l_len TYPE i,
l_len2 TYPE i,
l_tab TYPE tsfixml,
l_content TYPE string,
l_str1 TYPE string,
c_conv TYPE REF TO cl_abap_conv_in_ce,
l_itab TYPE TABLE OF string.
l_filename = p_file.
code to upload data from application server
OPEN DATASET l_filename FOR INPUT IN BINARY MODE.
IF sy-subrc <> 0.
 WRITE:/ 'invalid file path'.
ENDIF.
DO.
 READ DATASET l_filename INTO l_xml_line.
 IF sy-subrc EQ 0.
 APPEND l_xml_line TO l_xml_table.
 ELSE.
 EXIT.
 ENDIF.
ENDDO.
CLOSE DATASET l_filename.
code to find the table size
DESCRIBE TABLE l_xml_table.
l_xml_table_size = ( sy-tleng ) * ( sy-tfill ).
*code to convert hexadecimal to XML
LOOP AT l_xml_table INTO l_xml_line.
 c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data
replacement
 = space ).
 c_conv->read( IMPORTING data = l_content len = l_len ).
 CONCATENATE l_str1 l_content INTO l_str1.
ENDLOOP.
l_str1 = l_str1+0(l_xml_table_size).
SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
LOOP AT l_itab INTO l_str1.
 REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
 l_str1 WITH space.
ENDLOOP.
CALL TRANSFORMATION ('ID') " code to put in internal table
SOURCE XML l_str1
RESULT tab = gi_tabpo[].
ENDFORM. " get_xml_table

Hi Raja,
I tried the same. But it not populating the table and giving an error message in the return table "line 1 col 1-unexpected symbol; expected '<', '</', entity reference, charac".
I can't find any ' ; ' in the XML file. What could be the possible reason of error?

Reading XML File from application server

Hi experts,
My aim is to read a XML file from application server and extract the relevant data from it and process further.
When I am trying to read a XML file from application server it is reading success fully but the problem is that its not reading the last root structure of XML file why is so happening can any body help me?
I am using the following code:
TYPES: BEGIN OF xml_line,
text(256) type x,
END OF xml_line.
DATA: e_file LIKE rlgrap-filename VALUE 'applcatin server path'
OPEN DATASET e_file FOR INPUT IN BINARY MODE.
IF sy-subrc EQ 0.
DO.
    READ DATASET e_file INTO wa_item1-text.
    IF sy-subrc EQ 0.
      APPEND wa_item1 TO gt_item1 .
      CLEAR wa_item1.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET e_file.
after this i am passing this internal table to "cl_ixml" class to extract the data
but it returning the itab with required value except the last record.
The stream reading the file it self is i thought in complete thats why it is not converting the all values.
Please help me...
Thanks a ton in advance.

Hi,
1 Copy Report BCCIIXMLT1
2 (you can change the way of filling internal table xml_table if necessary)
3 you don't need the part between
*-- render the DOM back into an output stream/internal table
and
*-- print the whole DOM tree as a list...
Comment it out or simply delete it
4 Rename form print_node to your liking e.g. process_node
5 In your new form you need three extra variables:
data: attribs type ref to IF_IXML_NAMED_NODE_MAP,
      attrib_node type ref to IF_IXML_NODE,
      attrib_value type string.
6 After the lines:
when if_ixml_node=>co_node_element.
string = pNode->get_name( ).
Insert:
attribs = pNode->get_attributes( ).
clear attrib_value.
case string.
when ''. "put your XML tag name here
    attrib_node = attribs->get_named_item(name = '' ). "put your XML attribute name here
    attrib_value = attrib_node->get_value( ).
You can also refer link,
/people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach
thanks & regards
shreemohan

Read XML file from different server on JSP

Dear All,
I am a newbie to JSP with XML, now i want to read the "test.xml" from JSP.
I read successfully this "test.xml" file from my system and I got output, but I need to read the xml file from
different server like "http://www.domain.com/test.xml". I couldn't read such a type of file from different server.
Is it possible to read a xml file from different server?
If anybody have idea please let me know.
Thanks in Advance,
Prasath.
<%@ page import="java.sql.*,java.io.*,java.util.*,javax.xml.parsers.*,org.w3c.dom.*,org.xml.sax.*" %>
<%
try {
 DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
 DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
 Document doc = docBuilder.parse (new File("http://www.domain.com/test.xml"));
 // normalize text representation
 doc.getDocumentElement ().normalize ();
 out.println ("Root element of the doc is " +
 doc.getDocumentElement().getNodeName()+" ");
 NodeList listOfPersons = doc.getElementsByTagName("person");
 int totalPersons = listOfPersons.getLength();
 out.println("Total no of people : " + totalPersons+" ");
 for(int s=0; s<listOfPersons.getLength() ; s++){
 Node firstPersonNode = listOfPersons.item(s);
 if(firstPersonNode.getNodeType() == Node.ELEMENT_NODE){
 Element firstPersonElement = (Element)firstPersonNode;
 NodeList firstNameList = firstPersonElement.getElementsByTagName("first");
 Element firstNameElement = (Element)firstNameList.item(0);
 NodeList textFNList = firstNameElement.getChildNodes();
 out.println("First Name : " +
 ((Node)textFNList.item(0)).getNodeValue().trim()+" ");
 NodeList lastNameList = firstPersonElement.getElementsByTagName("last");
 Element lastNameElement = (Element)lastNameList.item(0);
 NodeList textLNList = lastNameElement.getChildNodes();
 out.println("Last Name : " +
 ((Node)textLNList.item(0)).getNodeValue().trim()+" ");
 NodeList ageList = firstPersonElement.getElementsByTagName("age");
 Element ageElement = (Element)ageList.item(0);
 NodeList textAgeList = ageElement.getChildNodes();
 out.println("Age : " +
 ((Node)textAgeList.item(0)).getNodeValue().trim()+" ");
 }//end of if clause
 }//end of for loop with s var
}catch (SAXParseException err) {
out.println ("** Parsing error" + ", line "
 + err.getLineNumber () + ", uri " + err.getSystemId ());
out.println(" " + err.getMessage ());
}catch (SAXException e) {
Exception x = e.getException ();
((x == null) ? e : x).printStackTrace ();
}catch (Throwable t) {
t.printStackTrace ();
%>

You might try:
Document doc = docBuilder.parse ("http://www.domain.com/test.xml");Alternatively use the java.net package to obtain an Input Stream to the xml document
InputStream in = methodThatYouWriteYourselfCalledgetInputStreamForURI("http://www.domain.com/test.xml");
Document doc = docBuilder.parse (in);cheers,
evnafets

Import an FLV file from Adobe Connect into Premiere Elements 12?

The Adobe Connect support staff recommended that we use Adobe Premiere Elements to edit the FLV file that we exported out of their software. We purchased Adobe Premiere Elements 12 based on that advice. Now we see that FLV files are not on the list of supported import files.
How can I import an FLV file from Adobe Connect into Adobe Premiere Elements 12 for editing?

Welcome to the forum.
Over the years, I have used Moyea's Flash Importer plug-in for PrPro, and it has worked perfectly. With about PrPro CS 4, IIRC, Adobe did add an FLV Importer, so Moyea began to suspend development of that plug-in. Then, with the release of the CC version of PrPro, they dropped FLV completely.
Now, Moyea does have other programs, but I do not know if any of them are plug-ins for PrE. However, many of their programs can create, edit and output FLV.
There is also a (free, if memory serves) FLV converter, FLV to AVI, which I used to convert FLV files, before I discovered the Moyea plug-in for my PrPro.
I would look into Moyea, to see if there is anything, that will work as a plug-in to PrE, http://www.video-to-flash.com/products/, and if not, explore a program, such as FLV to AVI: http://www.pazera-software.com/products/flv-to-avi-converter/
Good luck,
Hunt

I cannot encode .flv files from CS4 using AME

I’m having a problem encoding .flv files from Adobe Media Encoder CS4. All the jobs in the encoder encode for a period of time then stop about a ¼ of the way through the file.
I am encoding from a Matrox preset project at 1280x720p 59.94fps. Some clips have a luma corrector effect on them. After rendering, some clips will come up completely black on the timeline so I have decided to leave them unrendered. I don’t know if that is related to why I cannot encode a .flv file or not.
The settings I’m using for the .flv are:
.flv file, 720p, CBR, 3000kbps.
What’s strange is that I have encoded other .flv files from these same timelines but all have been smaller in screen resolution. That is the only difference. I can also encode .flv files from other projects without issue.
I don’t know why this is not working? Who can Help?!!!

OK, so if you do a quick SAVE AS to a new project, and remove the luma corrector, can you encode all the way through?
I have no experience with Matrox so I won't "go there".
MP

Error... trying to backup files from remote server

I've tried to backup files from one server (client installed) to tape drive on the administrative server (administrative, media, client) but get an error.
Backup of administrative server to the same media family was successful. What can be wrong?
2014/09/29.12:41:47 Transcript for job admin/14.1 running on 1-prim
2014/09/29.12:41:47
Backup started on Mon Sep 29 2014 at 12:43:24
Volume label:
Volume tag: ABC028
Volume UUID: da584616-2537-1032-990c-ae2b164578ea
Volume ID: test_media-000001
Volume sequence: 1
Volume set owner: root
Volume set created: Tue Sep 23 18:10:59 2014
Volume set expires: Tue Oct 07 18:10:59 2014
Media family: test_media
Original UUID: da584616-2537-1032-990c-ae2b164578ea
Archive label:
File number: 3
File section: 1
Owner: root
Client host: prgrc01
Backup level: 0
S/w compression: no
Archive created: Mon Sep 29 12:43:24 2014
Encryption: off
NDMP_MOVER_LISTEN failed because a listen socket couldn't be created.
The error reported was "host not found (FSP network database manager)".
Error: can't tell NDMP mover on 1-prim to listen - I/O error (NDMP client)
Backup statistics:
status 23
devices Drive1
devices 1
volumes test_media-000001
voltags ABC028
file 3
host prgrc01
encryption off
start_time Mon Sep 29 2014 at 12:43:24 (1411980204)
end_time Mon Sep 29 2014 at 12:43:32 (1411980212)
backup_time Mon Sep 29 2014 at 12:43:24 (1411980204)
entries_scanned 0
kbytes_scanned 0
entries_excluded 0
entries_skipped 0
mount_points_skipped 0
files 0
directories 0
hardlinks 0
symlinks 0
sparse_files 0
filesys_errors 0
unknown_type 0
file_kbytes 0
dev_kbytes 6
dev_iosecs 0
dev_iorate 7.2 KB/S
wrt_iosecs 8
wrt_iorate 896.0 B/S
physical_blks_written 0
write_errors 0
physical_blks_read 0
read_errors 0
error_rate 0%
path / incomplete

I've resolved the problem. There was a mystake in client host name.

Download a xml file from a server

Hi guys,
First of all excuse me for my disorganized english.
I have a JSP applicaction using tomcat 4.1 wich is accesed from internet using an IIS server for the redirection.
In my servlet I'm generating a XML file wich will be downloaded by the client, in the servlet I set up this header, like in the others forums some fellows told.
response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0);
response.setContentType("application/octet-stream");
response.setHeader("Content-Disposition", "attachment;filename=\"" + nombreBorrador + "\"");
I'm having a problem downloading a file from a server, the download dialog box says in the filename the name of the servlet instead of the name of the XML file.
Any comments will be really appreciated.
Best Regards
JCh.-

hai,
give a print of ur variable "nombreBorrador" and check whether the name of xml file is getting passed correctly.
Ani

Streaming .FLV files from Media Server 4.5 using PHDS

Similar Messages

Maybe you are looking for