Streaming movie plays perfectly on MAC but not on PC, why?

I have created a streaming movie and put it online. I have installed the latest version of Quicktimne for PC. The movie streams and plays perfectly on my Mac however it does not stream on my PC. It plays on the PC when it has fully downloaded (in the browser using quicktime) but the sound quality is poor - I can hear lots of cackles.
Can anyone help with this please?
Thanks
Alex

In addition to Neds suggestions, empty the Safari cache (which should be empty after a clean install).
Goto the Safari Get Info screen (in Finder or in Dock if you have Safari there), click the triangle on languages, and disable those you don't use.
My Safari response time was significantly slowed after the 10.4.5 update, and using the combo updater took care of that. The 10.4.6 combo update is located here.

Similar Messages

TS2610 My project plays on any Mac but not on my dvd player. Please advise.

My project plays on any Mac but not on my dvd player. Please advise.

Unfortunately that didn't do the trick. For the life of me I can't figure this one out. However, if I author it using iDVD (with the same media) it works? I'd make do with IDVD if I could get rid of the Apple logo in the lower right corner.

DVD plays on earlier macs but not on mine

I have a mac from 2009. I want to play a dvd that plays on earlier macs but my dvd player won't even recognise that there is a dvd. It whirrs a bit and then spits it out. Please help.
Thanks,
Tamara

Hi Tamara,
I have a macbook
The forums for the Macbooks having a black or a white plastic case are here:
http://discussions.apple.com/category.jspa?categoryID=248
If you Macbook has an aluminum case, post here:
http://discussions.apple.com/category.jspa?categoryID=249
If there are specific or recurring issues with MacBook DVD drives, it should show up in one of those forums.
If you want help figuring out exactly which Mac variant you have, do "About this Mac..." from the Apple menu at the left end of the menubar, then click on "More Info..." in the resulting window. If you copy and paste the results in the "Hardware Overview" into a post--EXCEPT for the serial number--people here can translate the info and make sure you find the proper forum for your Mac. For example, that info for my old PowerMac I like to use is:
Hardware Overview:
Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 1
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 1.75 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.4.8f2
Serial Number: <removed>
Although yours won't have exactly the same info, this shows the format you are seeking. Note how I deleted the serial number. This type of info gets you help faster because it avoids a lot of "back-and-forth" posts trying to figure out machine-specific details.
A

Airtunes streaming skips in iTunes 10 Mac but not iTunes windows

I have had problems with airtunes for a fair while now, definately the whole time i've had itunes 10, but recently noticed that using the same computer (MBP booted to Windows 7 using iTunes Windows) it streams perfectly. So now I'm really confused. Help!
Problem:
Here is the problem. Mac iTunes 10, play music streaming to me Airport express, will start to play then stop, pause, start, pause, play.... aarrrggg. Doesn't matter which song.
Environment:
I have Airport Extreme connected to Linksys modem. Wireless g/n network connecting to Airport express which is hard wired to stereo. Wireless network is perfect except for this airtunes issue, and support various mobile devices plus n and g apple notebooks. My main computer is Macbook Pro with dual boot windows 7 and mac snow leopard. I've recently found that itunes only behaves badly in Mac mode!
Diagnosis:
Have tried switching wireless channel from 1, 7, 11 etc to remove interferrence - but identified that this does not remove the issue.
Have tried streaming airtunes from iTunes windows on same computer and works FINE
Have tried streaming airtunes from iTunes on iPhone 3GS with iOS5 and works about 50% (skipping, but not as bad as from mac, but unacceptable quality)
Have tried streaming airtunes from iTunes on Macbook Pro with snow leopard and iTunes 10 and basically skips constantly
Help

Your issue sounds similiar to mine- https://discussions.apple.com/message/18747381#18747381
However, Apple can't seem to fix it...

QT streaming .mov plays back video fine, but sound choppy with static

I created some QT streaming files with compressor. 6 bandwidths for same video file. The files themselves play fine. When I click the QT ref movie I made the sound is poppy and has some static. You can view the video here.
http://services.ltc.arizona.edu/MediaServices/betts/betts6.mov
The problem does happen on more than one workstation, but the files on the server play fine. It's just when streaming. Any thoughts?

Yep. Pretty horrible.
Why not use some more modern codecs? Currently you're using Sorenson 3 and IMA 4:1 audio, Stereo and at 44.100Hz. No need for stereo in a "talking head" video. No need for an audio track that is only 4 times smaller than the audio found on a CD (4:1 compression).
Use MPEG-4 Video codec and AAC audio. This will shrink the data rate and probably fix your audio issues,

New dvd plays on the mac - but not on pc or dvd players

i have made many dvd's before that have worked fine, but the one i am on right now the dvd will not work on pc's or on regular dvd player.... any ideas.
thanks
mrC

Same problem here. Produced a six-minute video (pretty straightforward) in FCP and Compressed in DVD: Best Quality Pro 2.0. Format and create DVD that plays on desktop and MacBook but not in either of two DVD players. Where is the "build" list?
Here is the data from the Compressor Inspector box:
Name: MPEG-2 6.2Mbps 2-pass
Description: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5
File Extension: m2v
Estimated file size: 288.9 MB
Type: MPEG-2 video elementary stream
Usage:SD DVD
Video Encoder
Format: M2V
Width and Height: Automatic
Selected: 720 x 480
Pixel aspect ratio: NTSC CCIR 601/DV
Crop: (L: 0, T: 4, R: 0, B: 2)
Padding: None
Frame rate: (100% of source)
Selected: 29.97
Frame Controls: Automatically selected: Off
Start timecode from source
Aspect ratio: Automatic
Selected 4:3
Field dominance: Automatic:
Selected Bottom first
Average data rate: 6.2 (Mbps)
2 Pass VBR enabled
Maximum data rate: 7.7 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 15, Structure: IBBP
DVD Studio Pro meta-data enabled
I'm having to Compress video again as it disappears occasionally from one attempt at DVD burning to another, si I can't access FCP at the moment.

DVDSP DVD's play fine in macs but not in standalone players...

This might be attached to my previous problem, but I thought I would give it a new topic as it is now a new problem.
The DVD's I have made in DVDSP play as they should in DVD Player when inserted into the two iMacs we have, however when we insert the discs into a standalone/set top player, the DVD plays the main track first and THEN goes back to the menu.
What should happen is that a short intro video plays (first play) then onto the Menu where, of course, the viewer makes their selection.
If I stop the DVD by hitting th STOP button on the standalone player several times, I eject the disc and then re-insert it, the DVD plays as it should; showing the first play video and then going to the menu.
Would anyone know a solution to the problem apart from telling the client to hit stop first, ejecting and then re-inserting the DVD?
Cheers,
Spookola

I can only tell you what I'd start doing because I don't know what is happening here any more than you do. First I'd buy some other brand -R dvd blanks. Next I'd make some minor change to the DVD SP setup and burn a new set. You should know that burning dvd's on a Mac or PC is not as foolproof as commercially burned dvd's. You CANNOT guarantee compatibility. If you sell 50 copies you WILL find some people that can't play yours because of compatibility issues. For them you can try burning a +R dvd or buy another external burner and try that too. No single solution will guarantee compatibility when burning from a computer and playing on a commercial dvd player. some folks "never have a problem" but in general I think that's because they don't burn that many dvd's for that many people. sooner or later most folks that burn dvd movies on their mac or pc will find somebody that can't read their dvd.

DVD Studio burns a DVD that plays perfect on Mac but crops the edges on a DVD player

Has anyone ever come across this problem I have, where I burn a Quicktime movie from FCP (using Apple ProRes 422) and put it through Compressor - and when it plays on the laptop it looks perfect, but when I play it on my home DVD players, it crops the edges off? Like it's zoomed? I've checked the aspect ratio on the file and in DVD Studio and on my television setting, they're all correct at 16:9.
I'm going mad, had all sorts of help with this but can't find a solution! If anyone could help, I'd be extremely grateful.

What you are experiencing is "overscan" and is a function of TV displays.
Computers also have overscan but since you can dynamically resize to fit the display area, you don't tend to see it.
The concept of the "safe area" was put forward as a way to make sure that the important elements of your program do not get cut off on the sides. As David noted, TV makes/models have varying amounts of overscan (there is no standard) so to be conservative, the settings are around 10% of the total image.
x

Movie works on mac but not PC...help!

Hi!
Hopefully someone out there can help me...
I am trying to make a video play on a website that I designed. The video will play on a mac, but not a PC. When the user clicks on the link, the video (.mov) should start playing in whatever media player that computer has installed, either quicktime or windows media player. It isn't working on a PC. Maybe if I convert the video file to a windows media file or to a file that is easier read my a PC it would work? I don't know how to convert quicktime files into .wmv files.
help!!!
if you want to see the video, click on the "reel" link of www.williamday.net, then click on "reel" again in the middle of the page.

The problem is your page code (or lack of it).
You are directly linking to the file and bypassing any browser plug-in.
http://docs.info.apple.com/article.html?artnum=61011
http://developer.apple.com/internet/ieembedprep.html

I have a .mov file that plays on my mac but when someone tries to play it on a pc, they get an error 128 message. Help!

I have a .mov file that plays on my mac but when someone tries to play it on a pc, they get an error 128 message. Help! Please!

This is not the problem. We are using quicktime on the pc's and the mac. I also tried to open the file on the pc with other programs and it doesn't recognize the file. The file opens fine on my mac but I cannot save it as a new file. It says that "the end of the file was reached." The recording was made in iShowU then edited in Quicktime Pro.

I canot change an .img (video) file to a .mov file. It ends in .img no other endings. It plays on my computer but not on my blue Ray player TV. It came from Finalcut Pro as a home movie. Any help?

want to change .img to .mox or .avi but won't convert. It is a movie from Finalcut pro 10.1.3 as a home video. I am on IMAC 10.1.1 yosemity. I have tried 3 different video convcerters. It plays on my computer but not recognized by blue ray player on TV. - Roger

Julie O wrote:
I just purchased the MPEG2 component but it can't be installed on Yosemite using the installer. Do you have to manually drop it into a certain area folder?
Have you followed the instructions on the Square5 website>MPEG Streamclip for Mac>Lion/Mountain Lion and MPEG2 Playback Component?
Russ

I've ordered a new mac book pro 15" and i need to clean hard drive off my old PC...not really to move them to the mac, but just to save in case needed; mostly pics and office docs....any suggestions?

I've ordered a new mac book pro 15" and i need to clean hard drive off my old PC...not really to move them to the mac, but just to save in case needed; mostly pics and office docs....any suggestions?

Buy an external USB hard drive and copy your data to it. Either that or burn them all to single or double layer DVDs (depending on amount of data you have). Or if it's really a small amount, consider putting it all on a USB memory stick.

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video?

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
Baffled in SB

What format of MPG is this? Is this an MPEG1 or MPEG2 video? How was the video created?

I have my home movies on DVD from Windows. I am trying to import them into iMovie but it won't recognize the files. The movies will play on my Mac but I can't seem to import them.

I have my home movies on DVD burned from Windows and am trying to import them into iMovie. The DVD will play on my Mac but I can't seem to import the movie. Can anyone help?

See my post here for how to do this.

I bought an HD video off itunes, it will play on myIpad mini but not on my HD computer. When i try to download it to my Computer, it says my Computer isn't HD, but it is! its a Dell XPS 1330 with HDMI.....

i bought an HD video off itunes, it will play on myIpad mini but not on my HD computer. When i try to download it to my Computer, it says my Computer isn't HD, but it is! and the oiption it gives me is to rebuy an SD version.......BS!!! my laptop plays HD! its a Dell XPS 1330 with HDMI.....how can i get this HD Ted movie to play on my laptop, as my mini pad has no HDMI cable to plug into my TV.

Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!

Streaming movie plays perfectly on MAC but not on PC, why?

Similar Messages

Maybe you are looking for