Street and house number not showing for few customers in search xd03

Hi All,
While trying to search for a customer number in XD03 using "Address Attributes", i get the list of customers which is fine. However for few of those customers, system does not show the street name or the house number in the initial search result screen. When i go to check those customers, i see that those are maintained.
Can you tell me why is it not showing in search screen although they are maintained properly.
Regards,
Indraveer

You may need to check how those customer masters are created.
Also check whether those master records are set with deletion indicator or blocked.
Before posting my first response, I too searched OSS notes, but in vain.
The below OSS notes is not exactly providing solution for your issue, but you can have a look at those.
Note 1040733 - Search Help DEBIX: no result found as it should be
Note 408456 - F4 help selections not transferred for customer/vendor
Note 713677 - CUSTOMER_SEARCH/VENDOR_SEARCH fails if the address is shared
Regards

Similar Messages

Validate Street and House Number in the Customer Master Data (xd01/xd02)

All.
I need to validate if the fields street and house number are in blank in the Customer Master Data transaction (xd01/xd02). I found an user-exit (EXIT_SAPMF02D_001), which I can validate the customer data (KNA1, KNB1, etc) before to save. The problem is in the KNA1 structure, there aren't the fields street (STREET) and house number (NOUSE_NUM1), there is only the field STRAS, which street and house number values are concatenated.I solved this problem using field-symbol to catch these values in the screen, but I know it isn't a good solution. Is there another solution to solve this ? I had problem using this user-exit. It shows a message error type 'E' when either field street or field house number are in blank, after show this message if the user click in the tabs navigator button before press enter button, the transaction shows the error message "System error on reading table DYNTAB, screen no. 0370". Does Somebody know this problem?
Best regards,
Alexandre
ps: I'm coding in the ECC 6.

Amit.
Thanks for your suggestion, but I need to validate these values typed by the user. When I create a customer, I can't get these values in the ADRC table.
Regards, Alexandre

PO and order number not showing on shipment screen (VL03N)

We are implementing shipments in SAP. Two of the standard fields available on the variant builder in shipment display (t-code: VL03N) are PO number and Order number. However, these two fields are currently blank on the shipment display screen. Is there a configuration flag that needs to be set to pass these fields from the order to the shipment?

Hi
You are right . So far some other thread has been generated also before identifying same issue .
The option you have :
1. Administration --System initialisation -print preference >AR Invoice
However , if you want to bring it your serial number in one invoice , you probably need to customise your PLD .
2. AR invoice donot show serial number at row level because serial number is stored in different table .
Right click on AP invoice with serial number and Serial number transaction report or By menu bar Goto -->Serial Number and transaction report .
Hope this will narrow down what you are looking for
Thank you
Bishal

WT /411, /311 and 711 does not show for Form 940 credit reduction

I'm facing issue in form 940 credit reduction schedule A, In the payroll log I do not see /411, /311 and /711 wages types. Tax type 10 and 11 are there in tax model and also in BSI tax authority is there in Optional Rates Override. Please advise what I'm missing.
Thanks,
Anita

Hi Anita,
As a base rule, state tax type 11 is to compensate FED tax type 10, hence wherever you see tax type 10 assigned in FED tax combos against all tax classes, tax type 11 needs to be made available under same tax classes but for state.
Anyways, what you need to do is that -
1. Go to table T5UTD and see what all states have tax type 11 active for it and note it down.
2. Once done, you will need to look at FED tax model in table T5UTM and what all tax combos under tax area "U" have tax type 10 for tax class (which corresponds to your processing class 71 specifications). Note the tax classes that have tax type 10 under FED tax model.
3. Finally got each state that you have found as tax type 11 is active under step 1 from table T5UTD and for respective tax classes that you found from step 2 under FED model, look for same tax classes in each of state applicable and add tax type 11 under table T5UTY for tax combos found in table T5UTM against those tax classes for state tax model. Please make sure that if tax combos are shared across or used by different other tax models than create a new model replicating existing one and add tax type 11 to it, then assign same to tax model agaisnt taht tax class and tax area "U".
Example:-
You have found out that MI (Michigan) has tax type 11 active under T5UTD table but it does not come in your payroll log.
Suppose FED has tax model 100 assigned under table T5UTE.
Now this 100 tax model in table T5UTM has tax class 2 which has tax combo assigned as 40 against tax area "U".
Tax combo 40 in table T5UTY has tax type 10 only.
Go to Michigan tax model in table T5UTE, suppose it was 120.
Go to table T5UTM and look for tax model 120 and tax class 2. Suppose tax combo assigned is 43 against tax area "U".
Tax combo 43 in table T5UTY has tax type 10 only but since FED has tax type 10 assigned to tax class 2 therefore MI combo should also have tax type 11 in tax combo 43.
This change to tax combo 43 applies if tax combo 43 is only avaiable under tax model 120.
If tax combo was also used for other tax model then you will need to copy create 43 to other new tax combo number not used till date and copy all tax types under it.
Note:-
Here I have only told you about one tax class i.e. 2 and one state MI. You will need to configure same for all tax classes as applicable for MI and other states too.
Thanks,
Ameet

SharePoint 2010 List View Web Part not showing for read-only users?

Hello all,
I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
Is this intended by Microsoft or is it a bug?
Thank you!

Hi,
According to your post, my understanding is that the read only user could not see the list view web part.
Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
1. Check whether the user can access the list.
2. Check whether the user can view all the items instead of partial items in the list.
3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
If that is the case, make sure the user can access the lookup list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

I just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing.

i just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing. when i try to just select my number to send and recieve imessages from it will not show up. i can send and recieve regular text but not pictures or imessage. i have tried logging off and restarting and nothing has worked.help please!!

Did you remove your account information from the other person's iPhone?

Timing of text box will not appear. My text boxes stop working on slide 5 and they will not work for the remainder of the slide show.

Timing of text box not working. I get the first few slides to work and then on slide 5 my text boxes will not appear. And they do not appear for the rest of the slide show. Help anyone.

Text caption is timed to appear at 2 seconds, but you have a click box at 0sec. Its duration is very short, which means that I cannot see if there is a pause. I suspect this click box is pausing at the end of its timeline, which is at 0.3secs and the Text caption at 2 seconds will not appear before the user has clicked on that click box. The timeline is the core of Captivate, learn at least how to read it.
Tiny Timeline Tidbits - Captivate blog
If you want the green text caption 'Click on...' to appear right at the beginning of the slide, you have to check its Timing accordion: set it to start at 0 secs instead of 2 secs and extend its duration to the 'rest of the slide'.
I don't know what is in the Group. That group and the HIghlight box will disappear at 3 seconds. Or maybe the action that is triggered by the Clickbox is different from 'Continue'?
Lilybiri

I have had an itunes account for many years. I have recently purchased music on my iphone 5 and it is not showing up on my Macbook itunes account. WHY?

I have had an itunes account for many years. I have recently purchased music on my iphone 5 and it is not showing up on my Macbook itunes account. WHY?

nidubs wrote:
I have had an itunes account for many years. I have recently purchased music on my iphone 5 and it is not showing up on my Macbook itunes account. WHY?
Why would they?
Do you have Automatic downloads enabled? Note this only works for items purchased after it is enabled.
-> iTunes Store: How to enable Automatic Downloads
Also, see this -> Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT201272 I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore the

I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore these?

"I did make a full back up of my phone prior to updating the iOS"
Itunes content is not incliuded in the backup that itunes performs.
Audiobooks are not part of icloud and cannot be redownloaded.
You can try contacting itunes support and asking for an exception.

Just bought an .OTF font for Flash CS6 and it's not showing up in the list.

Just bought an .OTF font for Flash CS6 and it's not showing up in the list.
EscrowText-Roman.otf
Any reason why? It shows up in Illustrator and Photoshop just fine.
Line

If you have never synced an audiobook yet, you have to connect your ipad and go to the books tab.
Scroll down past the regular books and there will be where you sync your audiobooks.
Then they will show up on the music app under "other"

HT2534 The none option is not showing for indian itune store. So cant i create and itune account for just downloadning free app anymore without credit card information?

The none option is not showing for indian itune store. So cant i create and itune account for just downloadning free app anymore without credit card information?

HI..
The None option is not available in all countries
iTunes Store: Which types of items can I buy in my country?

The Download Circle Is Slower On Homescreen And Faster On App Store And iPad Mini Not Shows Up On My MacBook.

Well Since I Updated to iOS 8 My iPad Mini 2 Has Errors Downloading An App For Example: Today I Tried To Download A Chess App It Started Downloading it After The Circle in App store was Completed It Shows An Error Unable To Download Your App Try Again Later So I Went Back To The Home Screen And The App icon's Circle Was Not Fully Complete.And My iPad Mini 2 Does Not Show Up ON The Devices List ON My Mac It Shows An Error And It Does Not Show on My Mac. Please HELP Me
Mac Specifications:
MacBook 13-inch, Aluminum, Late 2008
Mac OS X Lion 10.7 (11A511)
2.4 GHz Intel Core 2 Duo
2 GB 1067 MHz RAM
NVIDIA GeForce 9400M 256 MB
250 GB SATA Hard Disk

Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.

Hp pavilion dv6000 few keys not responding for few minutes at start up

I have hp pavilion dv6000 laptop, its 1and half years old. the problem im facing is that its few keys i.e. (G, H, ', BACKSPACE, Esc and F7) do not work for 5 to 6 minutes when i start the laptop in the morning. Then for the whole day, these keys work fine.
Any help????????

Hi again Al259,
Thank you for the quick reply!
If you are not able to successfully restore to a previous working point on your desktop, I recommend performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836 for your in-warranty replacement options. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HP Full Software and Driver does not show on "Printers & Drivers" list.

I am staying at a friend's house which has an HP 7360. I downloaded the HP Full Software and Driver an attempted to make a wireless connection and it does not show on the printers and drivers list. What do I do to make it appear as a printing option?
Thanks
BikeGuy33

Just install the software that you downloaded, and it should come up automatically.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Online number not showing up

Why is my online number not showing up when I call mobiles or landlines?
I have purchased US number and it expires in may. Please help.

mranderson314 wrote:
Ever since I renewed my original US phone number it no longer shows up the same. While people can dial my US number and reach me. Yet if I call them my 310 US number shows up as a 661 area code or unknown caller, why is this? And can it be changed back to my original 310 number that appears when I call friends and family?
If people on telephones are seeing what you describe when you are calling from Skype, you need to make sure your Caller ID settings have your Online Number used for Caller ID. It is possible something changed the Caller ID settings. If the Online Number expired and then you renewed it, the expiration probably turned off your Caller ID. Caller ID is not enabled by default, allowing Skype users to make that choice.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Street and house number not showing for few customers in search xd03

Similar Messages

Maybe you are looking for