Strike Suit Zero (Steam and DRM free HiB) does not launch

Hey Guys,
i recently bought the game "Strike Suit Zero" from www.humblebundle.com Just because the developer/publisher is not willing/not able to help with the trouble I hope you guys could help me to find a workarround. The game just won't launch. Here's the log:
Running Tasks:
22
PRIO NAME STATUS
1) 205: MemoryManager - [Idle]
2) 204: ValkyrieEarlyLoad - [Idle]
3) 202: Filesystem - [Idle]
4) 201: cAsyncLoaderManager - [Idle]
5) 200: RendererBase - [Idle]
6) 160: RenderStateManager - [Idle]
7) 157: cCameraManager - [Idle]
8) 153: GLSLManager - [Idle]
9) 152: EffectManager - [Idle]
10) 150: PostProcess - [Idle]
11) 145: MaterialManager - [Idle]
12) 120: InputManager - [Idle]
13) 110: DebugRender - [Idle]
14) 100: CommandLine - [Idle]
15) 100: AutoObjectManager - [Idle]
16) 100: Sambuca - [Idle]
17) 100: LightingManager - [Idle]
18) 100: Localisation - [Idle]
19) 100: TaskManager - [Idle]
20) 100: Kernel - [Idle]
21) 55: Valkyrie - [Idle]
22) 0: PartitionRenderer - [Idle]
Memory Stores:
-"Main": 487.00 MB (16 bytes of partitions' alignment)
-"Sound": 42.00 MB (1024 bytes of partitions' alignment)
Memory Store "Main" (0x0xd637c008-0x0xf4a7c008) 487.00 MB
-Linear Partition Xii2 Transient1 (0xd637c010-0xd677c010) 4.00 MB (ACTIVE)
-Linear Partition Xii2 Transient2 (0xd677c010-0xd6b7c010) 4.00 MB (ACTIVE)
-Dynamic ThreadSafe Partition Xii2 General (0xd6b7c010-0xd6d7c010) 2.00 MB (ACTIVE)
-TLSF Partition Xii2 LUA (0xd6d7c010-0xd8b7c010) 30.00 MB (ACTIVE)
-Dynamic Partition Xii2 ToLua++ (0xd8b7c010-0xd937c010) 8.00 MB (ACTIVE)
-Linear Partition Xii2 StaticEffects (0xd937c010-0xd9395010) 0.10 MB (ACTIVE)
-Linear Partition Xii2 ShaderManager (0xd9395010-0xd9412010) 0.49 MB (ACTIVE)
-Dynamic Partition Xii2 Scratch (0xd9412010-0xda612010) 18.00 MB (ACTIVE)
-Dynamic Partition Xii2 XmlReader (0xda612010-0xda912010) 3.00 MB (ACTIVE)
-Linear Partition Xii2 Localisation (0xda912010-0xdab12010) 2.00 MB (ACTIVE)
-Dynamic Partition Xii2 Physics (0xdab12010-0xdbd12010) 18.00 MB (ACTIVE)
-Linear Partition Xii2 Input (0xdbd12010-0xdbd44010) 0.20 MB (ACTIVE)
-Dynamic Partition Xii2 SoundManager (0xdbd44010-0xdc032010) 2.93 MB (ACTIVE)
-Dynamic ThreadSafe Partition Xii2 Sambuca dynamic (0xdc032010-0xdd832010) 24.00 MB (ACTIVE)
-Dynamic ThreadSafe Partition Xii2 Sambuca fixed (0xdd832010-0xdf032010) 24.00 MB (ACTIVE)
-Dynamic Partition Xii2 Skeletal (0xdf032010-0xdf132010) 1.00 MB (ACTIVE)
-TLSF Partition Xii2 UI (0xdf132010-0xe8732010) 150.00 MB (ACTIVE)
-Dynamic Partition Xii2 HUD (0xe8732010-0xe8832010) 1.00 MB (ACTIVE)
-Linear Partition Xii2 PostProcess (0xe8832010-0xe8932010) 1.00 MB (ACTIVE)
-Dynamic Partition Xii2 GBuffer (0xe8932010-0xe894b010) 0.10 MB (ACTIVE)
-Dynamic Partition Xii2 Renderer (0xe894b010-0xe8964010) 0.10 MB (ACTIVE)
-Dynamic Partition Xii2 ResourceManager (0xe8964010-0xe89af010) 0.29 MB (ACTIVE)
-Dynamic Partition Xii2 Message Delivery (0xe89af010-0xe8baf010) 2.00 MB (ACTIVE)
-Dynamic Partition CollisionMesh Pool (0xe8baf010-0xe97af010) 12.00 MB (ACTIVE)
-Dynamic Partition Script Pool (0xe97af010-0xe99af010) 2.00 MB (ACTIVE)
-Dynamic Partition Model Pool (0xe99af010-0xe9aaf010) 1.00 MB (ACTIVE)
-Dynamic Partition Mesh Pool (0xe9aaf010-0xe9b45010) 0.59 MB (ACTIVE)
-Dynamic Partition Texture Pool (0xe9b45010-0xe9bc2010) 0.49 MB (ACTIVE)
-Dynamic Partition Font Pool (0xe9bc2010-0xe9cc2010) 1.00 MB (ACTIVE)
-Dynamic Partition Skeleton Pool (0xe9cc2010-0xe9ec2010) 2.00 MB (ACTIVE)
-Dynamic Partition Prefab Pool (0xe9ec2010-0xea2aa010) 3.91 MB (ACTIVE)
-Dynamic Partition Xii2 Quad (0xea2aa010-0xea3aa010) 1.00 MB (ACTIVE)
-Linear Partition Xii2 Shaders (0xea3aa010-0xea61b010) 2.44 MB (ACTIVE)
-Linear Partition Loading Screens (0xea61b010-0xea71b010) 1.00 MB (ACTIVE)
-Dynamic Partition Behaviour Manager (0xea71b010-0xeb61b010) 15.00 MB (ACTIVE)
-Dynamic Partition Scene Block (0xeb61b010-0xeb81b010) 2.00 MB (ACTIVE)
-Dynamic Partition AI Avoid Meshes (0xeb81b010-0xeb834010) 0.10 MB (ACTIVE)
-Dynamic Partition ROAResource (0xeb834010-0xeb934010) 1.00 MB (ACTIVE)
-Dynamic Partition Portal Rendering (0xeb934010-0xeba34010) 1.00 MB (ACTIVE)
-Dynamic Partition Variants (0xeba34010-0xecf34010) 21.00 MB (ACTIVE)
-Dynamic Partition VideoPlayer (0xecf34010-0xee834010) 25.00 MB (ACTIVE)
-Dynamic Partition Level Manager (0xee834010-0xee8b1010) 0.49 MB (ACTIVE)
-Dynamic Partition Model Instances (0xee8b1010-0xeea28010) 1.46 MB (ACTIVE)
-Dynamic Partition Launch Tube Behaviour (0xeea28010-0xeea8c010) 0.39 MB (ACTIVE)
-Dynamic Partition ECM Jammers (0xeea8c010-0xeea8c410) 0.00 MB (ACTIVE)
-Dynamic Partition Squads (0xeea8c410-0xeec8c410) 2.00 MB (ACTIVE)
-Dynamic Partition Lua Errors (0xeec8c410-0xeeca5410) 0.10 MB (ACTIVE)
-Dynamic Partition Targetable Dictionary (0xeeca5410-0xeeda5410) 1.00 MB (ACTIVE)
Memory Store "Sound" (0x0xd397b008-0x0xd637b008) 42.00 MB
Memory Manager Created
Running Tasks:
22
PRIO NAME STATUS
1) 205: MemoryManager - [Idle]
2) 204: ValkyrieEarlyLoad - [Idle]
3) 202: Filesystem - [Idle]
4) 201: cAsyncLoaderManager - [Idle]
5) 200: RendererBase - [Idle]
6) 160: RenderStateManager - [Idle]
7) 157: cCameraManager - [Idle]
8) 153: GLSLManager - [Idle]
9) 152: EffectManager - [Idle]
10) 150: PostProcess - [Idle]
11) 145: MaterialManager - [Idle]
12) 120: InputManager - [Idle]
13) 110: DebugRender - [Idle]
14) 100: CommandLine - [Idle]
15) 100: AutoObjectManager - [Idle]
16) 100: Sambuca - [Idle]
17) 100: LightingManager - [Idle]
18) 100: Localisation - [Idle]
19) 100: TaskManager - [Idle]
20) 100: Kernel - [Idle]
21) 55: Valkyrie - [Idle]
22) 0: PartitionRenderer - [Idle]
Memory Stores:
-"Main": 487.00 MB (16 bytes of partitions' alignment)
-"Sound": 42.00 MB (1024 bytes of partitions' alignment)
Memory Store "Main" (0x0xd6380008-0x0xf4a80008) 487.00 MB
-Linear Partition Xii2 Transient1 (0xd6380010-0xd6780010) 4.00 MB (ACTIVE)
-Linear Partition Xii2 Transient2 (0xd6780010-0xd6b80010) 4.00 MB (ACTIVE)
-Dynamic ThreadSafe Partition Xii2 General (0xd6b80010-0xd6d80010) 2.00 MB (ACTIVE)
-TLSF Partition Xii2 LUA (0xd6d80010-0xd8b80010) 30.00 MB (ACTIVE)
-Dynamic Partition Xii2 ToLua++ (0xd8b80010-0xd9380010) 8.00 MB (ACTIVE)
-Linear Partition Xii2 StaticEffects (0xd9380010-0xd9399010) 0.10 MB (ACTIVE)
-Linear Partition Xii2 ShaderManager (0xd9399010-0xd9416010) 0.49 MB (ACTIVE)
-Dynamic Partition Xii2 Scratch (0xd9416010-0xda616010) 18.00 MB (ACTIVE)
-Dynamic Partition Xii2 XmlReader (0xda616010-0xda916010) 3.00 MB (ACTIVE)
-Linear Partition Xii2 Localisation (0xda916010-0xdab16010) 2.00 MB (ACTIVE)
-Dynamic Partition Xii2 Physics (0xdab16010-0xdbd16010) 18.00 MB (ACTIVE)
-Linear Partition Xii2 Input (0xdbd16010-0xdbd48010) 0.20 MB (ACTIVE)
-Dynamic Partition Xii2 SoundManager (0xdbd48010-0xdc036010) 2.93 MB (ACTIVE)
-Dynamic ThreadSafe Partition Xii2 Sambuca dynamic (0xdc036010-0xdd836010) 24.00 MB (ACTIVE)
-Dynamic ThreadSafe Partition Xii2 Sambuca fixed (0xdd836010-0xdf036010) 24.00 MB (ACTIVE)
-Dynamic Partition Xii2 Skeletal (0xdf036010-0xdf136010) 1.00 MB (ACTIVE)
-TLSF Partition Xii2 UI (0xdf136010-0xe8736010) 150.00 MB (ACTIVE)
-Dynamic Partition Xii2 HUD (0xe8736010-0xe8836010) 1.00 MB (ACTIVE)
-Linear Partition Xii2 PostProcess (0xe8836010-0xe8936010) 1.00 MB (ACTIVE)
-Dynamic Partition Xii2 GBuffer (0xe8936010-0xe894f010) 0.10 MB (ACTIVE)
-Dynamic Partition Xii2 Renderer (0xe894f010-0xe8968010) 0.10 MB (ACTIVE)
-Dynamic Partition Xii2 ResourceManager (0xe8968010-0xe89b3010) 0.29 MB (ACTIVE)
-Dynamic Partition Xii2 Message Delivery (0xe89b3010-0xe8bb3010) 2.00 MB (ACTIVE)
-Dynamic Partition CollisionMesh Pool (0xe8bb3010-0xe97b3010) 12.00 MB (ACTIVE)
-Dynamic Partition Script Pool (0xe97b3010-0xe99b3010) 2.00 MB (ACTIVE)
-Dynamic Partition Model Pool (0xe99b3010-0xe9ab3010) 1.00 MB (ACTIVE)
-Dynamic Partition Mesh Pool (0xe9ab3010-0xe9b49010) 0.59 MB (ACTIVE)
-Dynamic Partition Texture Pool (0xe9b49010-0xe9bc6010) 0.49 MB (ACTIVE)
-Dynamic Partition Font Pool (0xe9bc6010-0xe9cc6010) 1.00 MB (ACTIVE)
-Dynamic Partition Skeleton Pool (0xe9cc6010-0xe9ec6010) 2.00 MB (ACTIVE)
-Dynamic Partition Prefab Pool (0xe9ec6010-0xea2ae010) 3.91 MB (ACTIVE)
-Dynamic Partition Xii2 Quad (0xea2ae010-0xea3ae010) 1.00 MB (ACTIVE)
-Linear Partition Xii2 Shaders (0xea3ae010-0xea61f010) 2.44 MB (ACTIVE)
-Linear Partition Loading Screens (0xea61f010-0xea71f010) 1.00 MB (ACTIVE)
-Dynamic Partition Behaviour Manager (0xea71f010-0xeb61f010) 15.00 MB (ACTIVE)
-Dynamic Partition Scene Block (0xeb61f010-0xeb81f010) 2.00 MB (ACTIVE)
-Dynamic Partition AI Avoid Meshes (0xeb81f010-0xeb838010) 0.10 MB (ACTIVE)
-Dynamic Partition ROAResource (0xeb838010-0xeb938010) 1.00 MB (ACTIVE)
-Dynamic Partition Portal Rendering (0xeb938010-0xeba38010) 1.00 MB (ACTIVE)
-Dynamic Partition Variants (0xeba38010-0xecf38010) 21.00 MB (ACTIVE)
-Dynamic Partition VideoPlayer (0xecf38010-0xee838010) 25.00 MB (ACTIVE)
-Dynamic Partition Level Manager (0xee838010-0xee8b5010) 0.49 MB (ACTIVE)
-Dynamic Partition Model Instances (0xee8b5010-0xeea2c010) 1.46 MB (ACTIVE)
-Dynamic Partition Launch Tube Behaviour (0xeea2c010-0xeea90010) 0.39 MB (ACTIVE)
-Dynamic Partition ECM Jammers (0xeea90010-0xeea90410) 0.00 MB (ACTIVE)
-Dynamic Partition Squads (0xeea90410-0xeec90410) 2.00 MB (ACTIVE)
-Dynamic Partition Lua Errors (0xeec90410-0xeeca9410) 0.10 MB (ACTIVE)
-Dynamic Partition Targetable Dictionary (0xeeca9410-0xeeda9410) 1.00 MB (ACTIVE)
Memory Store "Sound" (0x0xd397f008-0x0xd637f008) 42.00 MB
Memory Manager Created
Running Tasks:
22
PRIO NAME STATUS
1) 205: MemoryManager - [Idle]
2) 204: ValkyrieEarlyLoad - [Idle]
3) 202: Filesystem - [Idle]
4) 201: cAsyncLoaderManager - [Idle]
5) 200: RendererBase - [Idle]
6) 160: RenderStateManager - [Idle]
7) 157: cCameraManager - [Idle]
8) 153: GLSLManager - [Idle]
9) 152: EffectManager - [Idle]
10) 150: PostProcess - [Idle]
11) 145: MaterialManager - [Idle]
12) 120: InputManager - [Idle]
13) 110: DebugRender - [Idle]
14) 100: CommandLine - [Idle]
15) 100: AutoObjectManager - [Idle]
16) 100: Sambuca - [Idle]
17) 100: LightingManager - [Idle]
18) 100: Localisation - [Idle]
19) 100: TaskManager - [Idle]
20) 100: Kernel - [Idle]
21) 55: Valkyrie - [Idle]
22) 0: PartitionRenderer - [Idle]
Memory Stores:
-"Main": 487.00 MB (16 bytes of partitions' alignment)
-"Sound": 42.00 MB (1024 bytes of partitions' alignment)
Memory Store "Main" (0x0xd641f008-0x0xf4b1f008) 487.00 MB
-Linear Partition Xii2 Transient1 (0xd641f010-0xd681f010) 4.00 MB (ACTIVE)
-Linear Partition Xii2 Transient2 (0xd681f010-0xd6c1f010) 4.00 MB (ACTIVE)
-Dynamic ThreadSafe Partition Xii2 General (0xd6c1f010-0xd6e1f010) 2.00 MB (ACTIVE)
-TLSF Partition Xii2 LUA (0xd6e1f010-0xd8c1f010) 30.00 MB (ACTIVE)
-Dynamic Partition Xii2 ToLua++ (0xd8c1f010-0xd941f010) 8.00 MB (ACTIVE)
-Linear Partition Xii2 StaticEffects (0xd941f010-0xd9438010) 0.10 MB (ACTIVE)
-Linear Partition Xii2 ShaderManager (0xd9438010-0xd94b5010) 0.49 MB (ACTIVE)
-Dynamic Partition Xii2 Scratch (0xd94b5010-0xda6b5010) 18.00 MB (ACTIVE)
-Dynamic Partition Xii2 XmlReader (0xda6b5010-0xda9b5010) 3.00 MB (ACTIVE)
-Linear Partition Xii2 Localisation (0xda9b5010-0xdabb5010) 2.00 MB (ACTIVE)
-Dynamic Partition Xii2 Physics (0xdabb5010-0xdbdb5010) 18.00 MB (ACTIVE)
-Linear Partition Xii2 Input (0xdbdb5010-0xdbde7010) 0.20 MB (ACTIVE)
-Dynamic Partition Xii2 SoundManager (0xdbde7010-0xdc0d5010) 2.93 MB (ACTIVE)
-Dynamic ThreadSafe Partition Xii2 Sambuca dynamic (0xdc0d5010-0xdd8d5010) 24.00 MB (ACTIVE)
-Dynamic ThreadSafe Partition Xii2 Sambuca fixed (0xdd8d5010-0xdf0d5010) 24.00 MB (ACTIVE)
-Dynamic Partition Xii2 Skeletal (0xdf0d5010-0xdf1d5010) 1.00 MB (ACTIVE)
-TLSF Partition Xii2 UI (0xdf1d5010-0xe87d5010) 150.00 MB (ACTIVE)
-Dynamic Partition Xii2 HUD (0xe87d5010-0xe88d5010) 1.00 MB (ACTIVE)
-Linear Partition Xii2 PostProcess (0xe88d5010-0xe89d5010) 1.00 MB (ACTIVE)
-Dynamic Partition Xii2 GBuffer (0xe89d5010-0xe89ee010) 0.10 MB (ACTIVE)
-Dynamic Partition Xii2 Renderer (0xe89ee010-0xe8a07010) 0.10 MB (ACTIVE)
-Dynamic Partition Xii2 ResourceManager (0xe8a07010-0xe8a52010) 0.29 MB (ACTIVE)
-Dynamic Partition Xii2 Message Delivery (0xe8a52010-0xe8c52010) 2.00 MB (ACTIVE)
-Dynamic Partition CollisionMesh Pool (0xe8c52010-0xe9852010) 12.00 MB (ACTIVE)
-Dynamic Partition Script Pool (0xe9852010-0xe9a52010) 2.00 MB (ACTIVE)
-Dynamic Partition Model Pool (0xe9a52010-0xe9b52010) 1.00 MB (ACTIVE)
-Dynamic Partition Mesh Pool (0xe9b52010-0xe9be8010) 0.59 MB (ACTIVE)
-Dynamic Partition Texture Pool (0xe9be8010-0xe9c65010) 0.49 MB (ACTIVE)
-Dynamic Partition Font Pool (0xe9c65010-0xe9d65010) 1.00 MB (ACTIVE)
-Dynamic Partition Skeleton Pool (0xe9d65010-0xe9f65010) 2.00 MB (ACTIVE)
-Dynamic Partition Prefab Pool (0xe9f65010-0xea34d010) 3.91 MB (ACTIVE)
-Dynamic Partition Xii2 Quad (0xea34d010-0xea44d010) 1.00 MB (ACTIVE)
-Linear Partition Xii2 Shaders (0xea44d010-0xea6be010) 2.44 MB (ACTIVE)
-Linear Partition Loading Screens (0xea6be010-0xea7be010) 1.00 MB (ACTIVE)
-Dynamic Partition Behaviour Manager (0xea7be010-0xeb6be010) 15.00 MB (ACTIVE)
-Dynamic Partition Scene Block (0xeb6be010-0xeb8be010) 2.00 MB (ACTIVE)
-Dynamic Partition AI Avoid Meshes (0xeb8be010-0xeb8d7010) 0.10 MB (ACTIVE)
-Dynamic Partition ROAResource (0xeb8d7010-0xeb9d7010) 1.00 MB (ACTIVE)
-Dynamic Partition Portal Rendering (0xeb9d7010-0xebad7010) 1.00 MB (ACTIVE)
-Dynamic Partition Variants (0xebad7010-0xecfd7010) 21.00 MB (ACTIVE)
-Dynamic Partition VideoPlayer (0xecfd7010-0xee8d7010) 25.00 MB (ACTIVE)
-Dynamic Partition Level Manager (0xee8d7010-0xee954010) 0.49 MB (ACTIVE)
-Dynamic Partition Model Instances (0xee954010-0xeeacb010) 1.46 MB (ACTIVE)
-Dynamic Partition Launch Tube Behaviour (0xeeacb010-0xeeb2f010) 0.39 MB (ACTIVE)
-Dynamic Partition ECM Jammers (0xeeb2f010-0xeeb2f410) 0.00 MB (ACTIVE)
-Dynamic Partition Squads (0xeeb2f410-0xeed2f410) 2.00 MB (ACTIVE)
-Dynamic Partition Lua Errors (0xeed2f410-0xeed48410) 0.10 MB (ACTIVE)
-Dynamic Partition Targetable Dictionary (0xeed48410-0xeee48410) 1.00 MB (ACTIVE)
Memory Store "Sound" (0x0xd3a1e008-0x0xd641e008) 42.00 MB
Memory Manager Created
System Information:
Processor Information:
Vendor: GenuineIntel
CPU Family: 0x6
CPU Model: 0xf
CPU Stepping: 0xb
CPU Type: 0x0
Speed: 2400 Mhz
4 logical processors
4 physical processors
HyperThreading: Unsupported
FCMOV: Supported
SSE2: Supported
SSE3: Supported
SSSE3: Supported
SSE4a: Unsupported
SSE41: Unsupported
SSE42: Unsupported
Network Information:
Network Speed:
Operating System Version:
"Arch Linux" (64 bit)
Kernel Name: Linux
Kernel Version: 3.12.7-2-ARCH
X Server Vendor: The X.Org Foundation
X Server Release: 11500000
X Window Manager: i3
Steam Runtime Version: steam-runtime-release_2013-10-23
Video Card:
Driver: NVIDIA Corporation GeForce GTX 560 Ti/PCIe/SSE2
Driver Version: 4.4.0 NVIDIA 331.38
OpenGL Version: 4.4
Desktop Color Depth: 24 bits per pixel
Monitor Refresh Rate: 60 Hz
VendorID: 0x10de
DeviceID: 0x1200
Number of Monitors: 1
Number of Logical Video Cards: 1
Primary Display Resolution: 1920 x 1080
Desktop Resolution: 1920 x 1080
Primary Display Size: 20,04" x 11,26" (22,95" diag)
50,9cm x 28,6cm (58,3cm diag)
Primary Bus: PCI Express 16x
Primary VRAM: 1024 MB
Supported MSAA Modes: 2x 4x 8x 16x
Sound card:
Audio device: Realtek ALC889A
Memory:
RAM: 3956 Mb
Miscellaneous:
UI Language: English
LANG: de_DE.UTF-8
Microphone: Not set
Total Hard Disk Space Available: 230566 Mb
Largest Free Hard Disk Block: 118537 Mb
Installed software:
Recent Failure Reports:
Thanks in advance for any kind of help! If there's a solution for a problem like that which I just didn't find, please be so kind and post the link.
Last edited by cRaZy-bisCuiT (2014-01-20 14:42:55)

I had this same issue at first, when I had copied the extracted files from main/ directory to /opt/StrikeSuitZeroS/, I got exactly the same error.
after that, I tried extracting the archive directly to /opt/strikesuitzero/, including the main/linux/ directory path, and now I can launch it, if I cd to main/binaries/ first. So I'm thinking maybe SSZ is kinda precise of the directory structure or something simply went wrong when I extracted and copied the files at first.
I still haven't managed to play the game, because I got this weird gfx issue, where the game only displays on left half of my screen and everything is sort of psychedelic/rainbow colored and garbled, making it unplayable. but that's a whole nother story.
anyway, I hope this was of any help

Similar Messages

  • I have downloaded and installed Lion. iTunes does not launch when I connect it to my mac.

    Hi.... i have downloaded and installed Lion. iTunes does not launch when I connect it to my mac. The correct box is ticked in 'Summary'. Any ideas? Thx. The same thing happens with my ipad.

    Hi there Bry,
    If you want to be able with out it syncing automatically, you can disable the automatic syncing feature following the instructions in the article below.
    iTunes 11 for Mac: Require a prompt before automatic syncing
    http://support.apple.com/kb/PH12120
    Hope that helps,
    Griff W.

  • Rescue and Recovery 4.2 Does not Launch from Start Programs Thinkvantage

    I have a T61 with XP SP3.  I recently installed and uninstalled the version of Ubutuno that can be booted from Windows.  I played with it for a few days then uninstalled it.   Then I unistalled Rescue and Recovery using Add Remove programs...I am thinking of getting a SSD and I wanted to remove large programs before I image the disk.
    I changed my mind and tried to reinstall Rescue and Recovery.  I got the error saying that my boot space was too small.  I used the Lenevo mbr repair feature that I found on this board.
    I was then able to install R&R 4.21,  and I was able to create recovey disks using the create recovery disks program
    However, when I try to launch  Rescue and Recovery,  (Start, Programs, Thinkvantage, Rescue and Recovery). the disk spins and I get the hour glass on the cursor...and the hour glass goes away after about 7 seconds...the disk continues too blink off and on, but the program will not launch.  The rrservice.exe and rrpservice exe services are running.  I tried disabling Kapernsky virus, and that did not help.  I have rebooted several times.
    Any suggestions!  I will buy you a beer for sure!!
    Thanks
    Jeff

    My other post just  gave you the basics.  I got tired to typing the same info over and over.
    Two issues lately.
    (1) I am going from vista to win7, and I have a Factory shipped Lenovo. RNR wont install.
    (2) I have win7 on a factory ship, and I want to go from Hdd to SDD.  USB recovery wont boot.
    ==
    I take my backups to a 2nd HDD.  Also, every few months, I backup to a DVD set, HDD's may last 3 years, maybe 4. You dont want your loved backup on the C drive, and HDD fails. On top of that, if you back up to the C drive, the HDD grinds away. Read C, write to C\rrbackups.  Backup will run faster to 2nd HDD or USB.
    ===
    You state a pristine Vista.  I am guessing it was a Factory shipped Lenovo with Vista.
    The TIP in the other post is if you know of this issue BEFORE windows 7 install.
    At the time during Win 7 install, and it is deciding where to put itself, there is a Default Recommended and I think a drop down list of other options.  This is tricky.  Example, (a). park me in the current C partition. (b) park me on the whole HDD.
    Did you upgrade the Vista, inplace to win7 or did you clean install win7 to a blank C partition.
    Lets see if you have a recovery(vista) partition.
    Go to control panel>admin tools>computer management>disk management. Check to see if other partitions show up other than the C drive. Recovery partition should be around 10 GB. Sometimes this partition is labeled IBM_Preload or similar.
    Solution/workaround
    I dont have 1 that i have tested.  Maybe other users can offer suggestions.
    (1)You could delete the Q, but this might not clean up the MBR/BCD(boot control) entries.
    (2) Backup your loved win7, erase HDD, then restore.  MAYBE a win7 backup allows ignoring the Q partition.  I am not an expert with using win7 backup, and I dont have a q drive. 
    *** all this is time consuming**, risky, and may not   solve the issue.

  • Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. Why?

    Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. I have signed in successfully. Why?

    Hi irenedix,
    After Adobe Download Assistant is installed, you can start it at any time and select a product to download at the bottom of the window. The list updates as new products become available to download with the Adobe Download Assistant.
    Please refer : http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do_ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_
    Alternatively you can try downloading it from the direct download links available at: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    Regards,
    Rave

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Have a 10.6.8 mac and the icloud icon does not appear on the system preferences

    Hello,
    I have a 10.6.8 mac and the icloud icon does not appear on the system preference, even if I'ved upgraded the software.
    Renee

    The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
    To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
    The requirements for Mountain Lion and Mavericks are:
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
      and the supported models are:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    It is available from the Mac App Store (in Applications).
      You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

  • Sorry, your Story Free subscription does not allow access to this application. Please upgrade your s

    I started using Story a few months ago.  While writing a script (very proud of it's potential) I was past page 20 I believe, to my own demise I only backed it up around page 9 using a word document.  My Hard Drive died and had to be replaced.  While trying to save all my files before I took it to the apple store I went to grab my adobe story file and couldnt.  So, I tried to log in and got this "Sorry, your Story Free subscription does not allow access to this application. Please upgrade your subscription."  I went to the online-version and my story was not there.  Thus, I am very angry that I lost my script because out of the blue my subscription no longer allowed me to use Adobe Story on my Macbook Pro.
    Nevertheless, I have been unsuccessfully trying to re-open Adobe Story on my newly restored HD and I still get the same message.
    If you could help me with what needs to be done, that would be swell.
    Thanks.

    Yup I was working on my script on Adobe Story, without problems, I was
    unable to retrieve the file to save it.  My Hard Drive has since been
    erased and now I am working on a new HD.
    I did re-install CS6.  All my other Adobe programs work.  The online
    version of Story seems to work but every time I sign in using my Adobe ID
    it gives me that message. :/  The thing is I never had a subscription so im
    quite confused why it's telling me my subscription no longer allows me to
    use Story without upgrading and spending oodles of money.
    Thanks!
    Harriett McFarlane

  • HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

    I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

    iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

  • Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

  • I've been using FCP 7 on my iMac for quite some time with great success.  Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

    Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug)  I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years.  I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

    YOU ARE A LIFE SAVER!  I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

  • The "edit in" does not launch if I make any develop changes.  I am using LR 5.6 and all of my plug ins are properly installed, up to date and were working just fine.  Edit in does work if I reset the image or load an unmodified DNG.

    I am using LR5.6 on a Windows 7 machine with plenty of memory.  LR, CS5 and all of my plug ins have been working just fine.  Tonight I've found that if I make any kind of significant adjustments to an image, and the go to "Edit in.." that function does not launch.  I can use the Edit in command on an unmodified image, or if I reset the modified image.  I have the issue with all of my plug ins, including Photoshop, all of the Nik software, RadLab, and OnOne.  I believe that all of the plug ins are current.  I've been working with them yesterday and I had no issue.  I cannot recall anything that has changed since then, and I have not installed any software.  I'm at a loss!!  Please help!

    I have traced the problem to a corrupted profile.  When I captured the images in question, I also used Color Cherckr to create a profile for processing.  When I apply that profile to the adjustments I make, I can no longer "Edit In".  If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue.  Something seems to have corrupted the new profile.  I will re-create the profile and see if the issue is resolved.

  • Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

    Greetings everybody,
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
    On this particular product, the product variants are supposed to work in such a way where:
    If you select the value "1/8" from the "Choose Ribbon Width" field
    THEN
    The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
    I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
    Thank you very much for your time and help!

    Hi...
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
    At the top of this window you'll see the following:
    Apple Support Communities > Mac OS & System Software > Safari > Discussions
    This the Safari forum for the Mac OS X.
    Better that you post your topic here  > Developer Forums: Apple Support Communities
    I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

  • HT204053 i want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is

    I want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is valid.  I cannnot delete the account because "find my iphone" wants the password linked to this old account.  But when i go into the find my iphone app it is using my corect Apple ID.  How do i fix this?

    If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
    If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account.  You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then  on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

  • I'm trying an email address i know is mine yet still getting this message:"That Apple ID is already in use.If this Apple ID was created by you, simply sign in with your Apple ID and password.If it does not belong to you, try again using a different name."

    I keep getting this message:  "That Apple ID is already in use.If this Apple ID was created by you, simply sign in with your Apple ID and password.If it does not belong to you, try again using a different name."
    I'm trying to create a new id and e-mail using an e-mail address that is mine and has been mine for over a year - any ideas why this could be happening?

    Trying where? What sort of email address? The following answer is based on a guess as to what you are talking about.
    If you already have an @me.com address, perhaps as a result of having had a MobileMe account, and you are now setting up an iCloud account with an Apple ID you will find you will be asked to create a new @me.com address, and that you can't add your existing one because it is already an Apple ID.
    You can do one of two things:
    1. Sign out at System Preferences; sign in with your existing @me.com address and enable Mail.
    2. Stay signed in with the present ID and add your @me.com address in System Preferences>Mail, Contacts & Calendars.
    If you have further questions, or if your situation is different from what I've assumed, do please post back, but in a suitable forum - this one is specifically about using these Forums.

Maybe you are looking for