Strong red tint when exporting with prores

Hello There,
I'm using 5D Footage that i converted to AppleProRes (HQ) with the compressor and edited it in FCP plus did some grading in Color. Everything looks fine when I export with H.264.
However, I need to export the material with ProRes again because it will be used in Adobe After Effects, so i want to keep a high qualitiy. Now, when i'm exporting from FCP with the prores422(HQ) codec all the midtones have an extremely red tint and the contrast and the saturation is much higher than how i see it in Colors and FCP. Is this some kind of error or is there something i'm doing wrong here?
THX for ur help!

Prores LT is more than good enough for your 5D footage. You will not get any more quality than is already there by going to ProRes HQ. You will get considerably larger files that might not play back smoothly on your computer.
Humor us and tell us what happens when you run this workflow on a short ProRes LT clip.

Similar Messages

  • My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

    My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
    Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012)  Mountain Lion,
    Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
    32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
    Fusion Drive da 3TB
    NVIDIA GeForce GTX 680MX 2GB GDDR5
    During the rendering of complex FCPX mac crashes and I have to force a restart.
    I also happens when I try to export movies with Motion 5.
    Does anyone have the same problem with my new iMac?

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
    find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

  • Computer freezes when exporting with Adobe Media Encoder

    Hi, whenever I start to export via media Encoder, my computer kind of freezes...I am not able to edit or even use any other applictions when exporting with Adobe media encoder. This did not happen with the older version CC7. Any hints please? Very frustrating.

    I think the same problem:
    Part of audio missing in mp4 AAC rendered files from Watched Folders
    Probably with cached files. Try this: Adobe Media Encoder 2014.2 Part of audio missing in mp4 AAC rendered files - cache problem? - Video Production Stack Exc…

  • Getting red frames when export from cc 2014.2 codec used panasonic mxf format long GOP 50p. If any solution please help on that

    getting red frames when export from cc 2014.2 codec used panasonic mxf format long GOP 50p. If any solution please help on that

    i solve my red frame problem. originally my project was done in premiere pro cc 2014.2 & i render in Encoder cc 2014. in newer version i get lots of red frames. i complain a lot to adobe customer support . they said they know the issues but they couldn't solve. I was so tired from adobe customer support. one of the worse customer services i had. My friend got the mac pro & e got premiere pro cc 7.2 version. i convert all my footage mxf to mp4 in encoder cc 7.2 version and i succeed. i don't get any red frames.
    So i think the problem is in adobe encoder cc 2014.2 version. newer version.

  • Footage pixelated when exported with compressor

    I've film HD video and edited with FCP, the aspec ratio on the sequence is 720x480 anamorphic, and it looks great, when I export it with QuicK Time it looks great but DVD Studio Prp doesn't support the settings. when I export it with Compressor, DVD Studio Pro imports it fine, but it is very, very pixelated.
    What would be the best option to use when exporting with Compressor.
    What I want is that the WideScreen image shrinks when viewing it on a Standard TV, I've done it with iDVD but when watching it on a standard tv is cuts the two sides of the image.
    Thank you for your help.

    If editing HD material you would be best off editing in the HD timeline, size and Codec (not sure if you did that and then down rezzed?) SD DVDs used compressed video, so anything that compresses things more prior to the compression to an SD m2v (video used on DVDs) can lead to more of a quality hit.
    Anyway what you would do is export the movie as self-contained movie, reference movie or directly to Compressor to a 16:9 m2v preset (including one you made yourself) and use that in DVD SP
    Take a look [at this thread|http://discussions.apple.com/thread.jspa?messageID=11040698&#11040698] and [this thread|http://discussions.apple.com/message.jspa?messageID=11287710#11287710]
    I outline the procedures a bit more and also include links to some movies and other information

  • How do I stop Illustrator automatically adding numbers to file name when exporting with artboard?

    I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name  changes. When you have multiple files, you can't be manually renaming all the time. Anyone knows how to fix this? Thanks.

    This has been discussed a few times, and here is a summary of the usual solutions.
    http://forums.adobe.com/message/2989508#2989508
    What is it EXACTLY you are trying to do. Are you trying to export a single page from filename.ai  and make it filename.psd, (without any number afterwards). In that case you could delete the extra artboards prior to export, and then you won't have to checked use artbaords as there is only one page. Otherwise I would plan ahead so your end result will be filename-01.jpg,  filename-02.jpg, and then everytime you use export artbaords those names will replace.
    I am happy with the function as is, and would prefer to have a serial number automatically after the name when checking use artboards. But sounds liek you and others desire more options and thte ability to turn off adding to the filename.

  • ORA-39126 when exporting with expdp

    Hi there,
    I'm getting a crash on 11g 11.1.0.7 when exporting a schema using expdp:
    expdp
    Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Estimate in progress using BLOCKS method...
    Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
    Total estimation using BLOCKS method: 3.096 GB
    ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA [TABLE_DATA:"NSNPL"."SYS_EXPORT_SCHEMA_02"]
    ORA-22813: operand value exceeds system limits
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
    ORA-06512: at "SYS.KUPW$WORKER", line 7839
    ----- PL/SQL Call Stack -----
      object      line  object
      handle    number  name
    0x14d81a160     18237  package body SYS.KUPW$WORKER
    0x14d81a160      7866  package body SYS.KUPW$WORKER
    0x14d81a160      2744  package body SYS.KUPW$WORKER
    0x14d81a160      8504  package body SYS.KUPW$WORKER
    0x14d81a160      1545  package body SYS.KUPW$WORKER
    0x14d81db88         2  anonymous block
    ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA []
    ORA-22813: operand value exceeds system limits
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
    ORA-06512: at "SYS.KUPW$WORKER", line 7834
    ----- PL/SQL Call Stack -----
      object      line  object
      handle    number  name
    0x14d81a160     18237  package body SYS.KUPW$WORKER
    0x14d81a160      7866  package body SYS.KUPW$WORKER
    0x14d81a160      2744  package body SYS.KUPW$WORKER
    0x14d81a160      8504  package body SYS.KUPW$WORKER
    0x14d81a160      1545  package body SYS.KUPW$WORKER
    0x14d81db88         2  anonymous block
    Job "NSNPL"."SYS_EXPORT_SCHEMA_03" stopped due to fatal error at 00:57:23
    This look awfully similar to bug 6991626 (cf ID 737618.1), however the database has already been successfully patched (and in fact even repatched) for this bug:
    $ORACLE_HOME/OPatch/opatch lsinventory
    Invoking OPatch 11.1.0.6.2
    Oracle Interim Patch Installer version 11.1.0.6.2
    Copyright (c) 2007, Oracle Corporation.  All rights reserved.
    Oracle Home       : /opt/oracle/db11g
    Central Inventory : /opt/oracle/inventory
       from           : /etc/oraInst.loc
    OPatch version    : 11.1.0.6.2
    OUI version       : 11.1.0.7.0
    OUI location      : /opt/oracle/db11g/oui
    Log file location : /opt/oracle/db11g/cfgtoollogs/opatch/opatch2010-06-02_08-23-53AM.log
    Lsinventory Output file location : /opt/oracle/db11g/cfgtoollogs/opatch/lsinv/lsinventory2010-06-02_08-23-53AM.txt
    Installed Top-level Products (2):
    Oracle Database 11g                                                  11.1.0.6.0
    Oracle Database 11g Patch Set 1                                      11.1.0.7.0
    There are 2 products installed in this Oracle Home.
    Interim patches (6) :
    Patch  6991626      : applied on Tue Jun 01 22:35:32 WET 2010
       Created on 14 Oct 2008, 23:25:07 hrs PST8PDT
       Bugs fixed:
         6991626
    [...]Does anyone have an idea on what might be the culprit here?
    Thanks for your help,
    Chris

    Hi Prathmesh,
    in fact I saw this very thread before and I made sure that both solutions were applied. Moreover as I said patch 6991626 had already been applied earlier, precisley to fix this problem, and I've had been able to successfully export other albeit somewhat smaller schemas (500M instead of 3GB) in the last few months. This is why I was so puzzled to see that exact bug raise its ugly head again. As far as I can tell I didn't do any modification to the DB since that last patch in nov. 2009. In fact the DB has been running pretty much untouched since then.
    I even tried yestereday to reinstalled the patch again; opatch does the operation gracefully, first rolling back the patch then reapplying it again, with only a warning about the patch being already present. However the pb does not get fixed any better.
    Thanks a lot for your help,
    Chris

  • Keep Red Filename when exporting to QT

    I have a lot of Red Footage which I need to trim/color correct in FCP. I use log and transfer window to ingest the footage and then Export > Quick Time to 1080p.
    The problem is, I have to maintain the original filename for future reference.
    Is there a way to keep the original file name when exporting?
    When I export, it ask me for the file name as "save as" and it puts "Sequence 1" by default in. Is there any way to override that and put the original file name in?

    Yes, thank you, I know about the voodoo to get things out to Compressor. Must be a sequence in the main sequence folder in the bin to work voodoo thing.
    I think my problems are systemic as now compressor will not launch. I have been having nothing but problems since I installed 10.4.10. First all my Office programs would not launch then I actually installed OS 10.4.10 several times rebuilding my system by archive and installing 10.4.8 and then using the combo installer from there. I thought I had a stable system but I guess I will have to revert to 10.4.9 or reinstall compressor or Quick Time or FCP Studio or.......ARRGGHHHH?
    I though that the dialog was amusing in the extreem! It wasn't "Sequence has no media" it was:
    "No Movie in File" Of course there isn't any movie in the file you didn't put the movie into a file....sheesh. Anyway I'll post again.
    PITA
    <br<br>
    MBP C2D 15 - Dual 1.25 G4 MDD   Mac OS X (10.4.10)   Hair is falling out here...hee hee

  • What Rendering intent is used when exporting with a different color space?

    Hi,
    I would be ever so grateful if any one can tell me what rendering intent is used by LR4 when exporting using a custom colour space as there is not an option as there is with the print module.
    Thanks.
    Message title was edited by: Brett N

    Jeff Schewe wrote:
    Bob_Peters wrote:
    The rendering intent in the Export dialog is Perceptual.
    Actually, an RGB color space to RGB colorspace is always only Relative Colorimetric...and adding Perceptual would only work with certain V4 ICC color spaces (you can find perceptual V4 color spaces for sRGB and ProPhoto I think but I'm not sure they would work in Lightroom anyway).
    When using an RGB print output profile you can select either Perceptual or Relative and have the intents actually applied.
    True.
    The case of interest to me is when I have to print a lot of files using a third-party profile and maintain the original filename so it appears on the back.  That is why I made the request more than a year ago.
    The problem with the Print module is that it clobbers the filename but does allow 2 choices for the rendering intent.  Having to deal with weird filenames creates a mess when matching, say, 50 prints with custom notecards.

  • Error when exporting with Quicktime

    I'm having some problems exporting with Quicktime from iMove '08. Here are my settings:
    (The highlighted portion says 20,000 kbits/sec)
    I have exported using these settings before, but for some reason, it gives me error code -2002 when it finishes exporting now, and tells me that it can't export. Anyone know what error code -2002 is? I can't find it here or on Google. Exporting straight to m4v worked just fine.

    I'm exporting at those dimensions because that's just where I had it set (lol). I didn't even realize it was HD until just now, but like I said, I put the lowest possible data rate (32 kbits/sec) and the smallest dimensions possible (160x120) and it still didn't work.
    However, I had completely missed the fact that the audio wasn't being exported. I reset the audio settings and tried again on the smallest setting, and that worked. Thanks for your help!

  • Problem with interlacing when exporting with Media Encoder CS 5.5

    It seems that when exporting a Video with interlacing in Premiere 5.5 with Media Encoder 5.5, the exported video is still interlaced although it is rendered with progressive settings. When rendering with the same settings through Premiere 5.5 without Media Encoder 5.5 (Button "Export") it is correct and progressive.
    I tried this with H264 and MPEG2. Anyone experiencing this problem too?
    Thanx!

    Were the field interpretted correctly in the first place?  Even if you think they are, try reversing them.  I've just been through hell doing something similar with a mishmash of client material from around the world.
    In some instances I switched field order (In the File>Modify) although it didn't seem logical.  In others, I used AE CS5.5 to added the Reduce Interlace Flicker filter.

  • Final cut pro problem when exporting with quicktime movie

    Hello!
    I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
    keyfram 10
    bitrate 6000
    faster encode
    size 1920x1080 HD 16:9
    its not a problem the movie works fine all the way.
    But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
    If you have an e-mail i can send you just the part where this happening.
    Please help me!
    Thanks Gabriel

    I am also expriencing the same error. Tried every solution listed so far:
    1. Switch off background rendering. Trash render files. Don't render. Export.
    2. copying the project within Final Cut Pro into another project
    3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
    Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
    What's going on?

  • RAW files give a red tint when processed in photomatix?

    What causes or what is the fix, to correct a terrible red tint over HDR photos processed through photomatix 4. It only happens if I process  RAW files from a 5D Mark III, JPEG's process fine.

    The internal structure of RAW was changed for 5D3. You should update the program(s) but first ask (or try) to see if the new version of the program supports the new RAW format. It is a common problem with the programs which are based on Dave Coffin's dcraw.
    A temporary solution would be to use the Canon's own program which comes with the camera or download a good freeware picture manager / browser (like FastStone Image Viewer - see www.faststone.org ) which supports it and convert the files to JPG (or any other format which Photomatrix reads).
    my 2c & HTH,
    John Th.

  • Non-functioning booksmarks when exporting with Acrobat X

    Using InDesign CS5, I export my book documents to PDF Print and include bookmarks and hyperlinks. This has been working just fine using Acrobat Standard, and the person reading the document can navigate through the pages using either the document's Table of Contents or the Adobe bookmarks panel. I recently upgraded to Acrobat Pro X, and now this function no longer works properly. When you click on any Table of Contents bookmark, they all take you to the first page of the document. In addition, the bookmarks in the Adobe bookmark panel do not work at all. When I look at the bookmark properties, they all point to p0.  It is possible to manually reset the properties of the Adobe panel bookmarks, but not the TOC, but this is time consuming and doesn't solve the problem. Besides removing Acrobat Pro X from my computer, has anyone found another solution for this problem?

    I believe this is a known bug when exporting Books from CS5, and that it is not restricted to Acrobat X.
    The only workaround I know is to combine the files into one document.

  • Why do I get a yellow exclamation point with red background when exporting to YouTube using compressor?

    Whenever I try to export using FCPX and Compressor 4 I always get something that looks like this: 
    Any idea why that is? I'm using all default settings on the youtube export, and I'm transcoding it using another mac via compressor.

    None of these answers are correct. The error favicon happens in Firefox for Android occasionally. When the browser is offline or on a poor network connection you will get a timeout error page.
    We have a bug where the icon persists on reload. With a little time the favicon cache will expire and the favicon will be updated to the correct one.

Maybe you are looking for