Structure Index Member structure imput does not match Input Splitter output
I am running into a problem with Tiger's Quartx Composer where a structure output from an Input Splitter does not match the structure input to the Structure Index Member it is directly connected to. The input to the Structure Index Member displays an unchanging value structure when a changing value structure is passed to it. The same result occurs if the inputted structure in received via publish by passing the Input Splitter. Does anyone know what would cause this to happen?
Hi Frank,
Sorry, I have absolutely no idea what you're dealing with, but have you done any OS Maintenance lately, like clearing Caches?
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.
Similar Messages
-
Index seen in RoboHelp does not match CHM
I have a project which has conditional text and topics to
enable me to create different CHM Help files for four variations of
an application. I haven't noticed any problems with the indexes in
previous versions of the Help files that I've generated but am
having real problems this time.
The index looks fine in RoboHelp. It's designed so that
parent keywords which have associated sub-keywords do not have
links to help topics. It uses some re-direct topics to avoid
keywords appearing in an index for the wrong product.
When I generate the CHM files the indexes omit some parent
keywords. The sub-keywords for the missing parent keywords are
inserted under other (inappropriate) parent keywords. I've been
struggling with this for days without finding anything obvious that
might be causing the problem. In the end I deleted the index and
re-entered all index entries manually again. Unfortunately, this
didn't fix the problem.
In the end, to enable me to release the Help files I had to
use the following, unsatisfactory workaround. I went through slowly
identifying each missing parent keyword and gave each of them a
link to a topic that was displayed in all versions of the Help. So
I've ended up linking to some topics that are not particularly
appropriate, and having an index which is not consistent (some
parent keywords have links and most don't).
Any suggestions on what's going on here?Ressucitating this topic as I have a similar issue but I am
not working on a merged project....
I am using RH for HTML X5 and generating HTML Help. I was
working on the index (adding keywords) when RH crashed on me (CPD
issue). I restored my CPD file and for some reason now, the index
from the RH project does not match the index of the compiled CHM
file! I tried opening the project.hhk file and the rhkkeyword.apj
file in a text editor and tried to find the keywords that are in
the compiled help but not in the project. Both files looked like my
index from within the RH project, i.e. they did not have these
extra keywords. Basically, I have got a few keywords stored
somewhere, but not in my hhk or apj files, that I cannot edit.
Any ideas of where these could be stored (CPD?). How can I
get to them? I need to edit the topics linked to one of these
keywords and cannot do this. I tried re-adding the keyword to my
index in RH but the software tells me it already exists (and I
cannot see it)...
Thanks in advance for any assistance, -
MAX differential measurement does not match DAQ Assistant output
I am using a USB Compact DAQ AI 9205 and have a differential input running into AI23 and AI31.The signal is run to the AI module with a shielded twisted pair cable.
When using MAX, it shows that my signal is at about 4.4 Vdc. An external meter agrees with this reading.
When measured using DAQ Assistant in the VI, the output shows -.5 volts.
Can you tell me what could be causing this?
metzler CLADMetzler:
If only one channel is returning erroneous values, it may be possible that there is a malfunction in hardware. In order to confirm/eliminate the possibility, could you test the suspect input with one of the shipping DAQmx examples?
If you open the Example Finder (Help --> Find Examples), browse to "Hardware Input and Output --> DAQmx --> Analog Measurements --> Voltage. I would recommend trying "cont acq&graph voltage-int clk.vi."
Set it to use the suspect channel and compare the reading with your external meter. If they agree, then there's likely an issue with your code somewhere. You'll need to start simple and build up to your current program's implementation complexity to find where the signal is not being passed correctly.
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support -
Frame rate for camera does not match with AVI output
Hello,
I'm taking a video from a Basler A504K camera of well plate bottoms deflecting down. I have a frame rate indicator from the Vision Acquisition to see at what fps the camera is acquiring images, and I also have a frame rate controller at the IMAQ AVI Create VI.
The problem is when I set the frame rate at the Create VI. The higher I set the frame rate, the fewer frames it seems to take. For example when I play the videos on Windows Media Player, at 10fps, the video length is 60s. At 100fps, the video length is 6s. At 20fps, it's 30s, and at 50fps, it's 12s. Obviously, the video length decreasing by the factor by which I increase the fps. But since higher frames per second videos show a slower/longer videos, since they have more images to display per second?
I need to be able to see a slow increase and decrease in the well deflections smoothly. At high frame rates, the video goes by so fast that I cannot analyze the deflections. At low frame rates, the video is slower, but there are too many missing frames so the deflection is not smooth (ie. you see no deflection one second, and the next, you see the peak deflection without seeing the gradual increase in deflections). It is very hard to find an "ideal" frame rate, so I was wondering if there was another way to control the frame rate such that I have high fps, and longer video lengths?
I'm attaching my VI. The bottom loop is where all the Video and Camera controls are. The top loops is to control pressure gauge and valve (just ignore that loop)
Thank you,
B.J. Kim
University of Michigan
Attachments:
Injury_Pressure_PulseFINAL_AVI.vi 174 KBHi B.J. Kim,
The problem you're seeing with the fps and video length makes sense to me. If you keep the overall frame count constant and change only the rate of playback, then the video time will be indirectly proportional, as you have noticed. Just from simple math, it appears like you kept the video image at a constant of 600 total frames while changing the frame rate between 10, 20, 30fps, etc. If you're looking to have more resolution in you video, maybe you could increase the actual frame rate of acqusition from your camera. You may also try placing a small millisecond wait in your while loop to slow down execution speed. -
Error 'window SRID does not match layer SRID' despite using Index MBR
Hey!
I'm trying to run the following query:
SELECT count(*)
FROM mytable
WHERE SDO_FILTER(geom, (SELECT sdo_root_mbr FROM user_sdo_index_metadata WHERE sdo_index_name='IDX_GEOM_MYTABLE') ,'querytype = WINDOW') = 'TRUE';
The index I'm querying in the Subquery is the geometry index for mytable.geom, i.e. I'm doing a spatial query on IDX_GEOM_MYTABLE with it's own geometry index'es MBR. And I get this:
"window SRID does not match layer SRID"
How can that happen?
Regards,
ChristianJohn's right. If I see correctly what you're trying to do you could also do this:
SELECT count(*)
FROM mytable
WHERE SDO_FILTER(geom, SDO_TUNE.EXTENT_OF(mytable,my_SDO_column) ,'querytype = WINDOW') = 'TRUE';
If the Index was built correctly and is not partitioned this should give you the same result. -
Hi,
I want to load a XML document in structured XMLType. You can run my code on your database if you have a directory object called LOG_DIR. I am on Oracle 10.1 .
The schema is a simple example which describe a database table(like it will have 1 or more columns and 0 or more indexes). My schema looks like,
<xs:schema elementFormDefault="qualified" attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="Tables" type="Table">
<xs:annotation>
<xs:documentation>Table defination</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="table_name" type="xs:string"/>
<xs:complexType name="Table">
<xs:sequence>
<xs:element name="Column" type="Column" minOccurs="1"/>
<xs:element name="Index" type="Index" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="Column">
<xs:annotation>
<xs:documentation>Column of the table</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="Name" type="xs:string" minOccurs="1"/>
<xs:element name="Type" type="xs:string" minOccurs="1"/>
<xs:element name="Capacity" type="xs:decimal" minOccurs="1"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="Index">
<xs:annotation>
<xs:documentation>Index on the table</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="Name" type="xs:string" minOccurs="1"/>
<xs:element name="Type" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
I registered the schema,
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL => 'tables.xsd',
SCHEMADOC => bfilename('LOG_DIR','tables.xsd'),
CSID => nls_charset_id('AL32UTF8')
END;
This was successfull, also the following create table was ok,
CREATE TABLE TMP_XML_TABLES
file_name VARCHAR2(2000),
load_date DATE,
xml_document XMLType
XMLType COLUMN xml_document
XMLSchema "http://xmlns.oracle.com/xdb/schemas/TDB/tables.xsd"
ELEMENT "Tables";
Now I have a XML document,
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.oracle.com/xdb/schemas/TDB/tables.xsd">
<table_name>trades</table_name>
<Column><Name>trade_id</Name><Type>varchar2</Type><Capacity>50</Capacity></Column>
<Column><Name>source</Name><Type>varchar2</Type><Capacity>100</Capacity></Column>
<Column><Name>trade_date</Name><Type>date</Type></Column>
<Column><Name>trader</Name><Type>varchar2</Type><Capacity>200</Capacity></Column>
<Index><Name>trades_pk</Name><Type>btree</Type></Index>
<Index><Name>trades_idx1</Name><Type>bitmap</Type></Index>
</Tables>
When I am trying to load this, I get the error,
SQL> INSERT INTO TMP_XML_TABLES
2 VALUES
3 ('tables1.xml',
4 sysdate,
5 XMLType
6 (
7 bfilename('LOG_DIR','tables1.xml'),
8 nls_charset_id('AL32UTF8')
9 )
10 );
INSERT INTO TMP_XML_TABLES
ERROR at line 1:
ORA-19007: Schema - does not match expected tables.xsd.
Can somebody please explain the cause ???
Thanks and RegardsA quick search of the forum for ORA-19007 should have allowed you to find the answer to your problem. Since you XML Schema does not declare a target namespace you need to use the xsi:noNamespaceSchemaLocation tag rather than the schemaLocation tag..
Also please do not use URLs starting http://xmlns.oracle.com for your schemaLocation hint. If you do no own your own domain I'd suggest example.org...
Finally please make sure that your XML Instance is valid per your XML Schema before posting. You can do this using tools like JDeveloper or XMLSpy. What should have been a 5 min repsonse took me over 20 mins to work through due to the errors in the XML Schema...
Anyway here's a working example for you
SQL>
SQL>
SQL> var schemaURL varchar2(256)
SQL> var schemaPath varchar2(256)
SQL> --
SQL> begin
2 :schemaURL := 'http://xmlns.examples.org/xdb/schemas/TDB/tables.xsd';
3 :schemaPath := '/public/testcase.xsd';
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> DROP TABLE TMP_XML_TABLES
2 /
Table dropped.
SQL> call dbms_xmlSchema.deleteSchema(:schemaURL,4)
2 /
Call completed.
SQL> declare
2 res boolean;
3 xmlSchema xmlType := xmlType(
4 '<xs:schema elementFormDefault="qualified" attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="
tp://xmlns.oracle.com/xdb">
5 <xs:element name="Tables" xdb:defaultTable="TABLES_TABLE">
6 <xs:annotation>
7 <xs:documentation>Table defination</xs:documentation>
8 </xs:annotation>
9 <xs:complexType>
10 <xs:complexContent>
11 <xs:extension base="Table"/>
12 </xs:complexContent>
13 </xs:complexType>
14 </xs:element>
15 <xs:complexType name="Table">
16 <xs:sequence>
17 <xs:element name="table_name" type="xs:string"/>
18 <xs:element name="Column" type="Column" maxOccurs="unbounded"/>
19 <xs:element name="Index" type="Index" minOccurs="0" maxOccurs="unbounded"/>
20 </xs:sequence>
21 </xs:complexType>
22 <xs:complexType name="Column">
23 <xs:annotation>
24 <xs:documentation>Column of the table</xs:documentation>
25 </xs:annotation>
26 <xs:sequence>
27 <xs:element name="Name" type="xs:string"/>
28 <xs:element name="Type" type="xs:string"/>
29 <xs:element name="Capacity" type="xs:decimal"/>
30 </xs:sequence>
31 </xs:complexType>
32 <xs:complexType name="Index">
33 <xs:annotation>
34 <xs:documentation>Index on the table</xs:documentation>
35 </xs:annotation>
36 <xs:sequence>
37 <xs:element name="Name" type="xs:string"/>
38 <xs:element name="Type" type="xs:string" minOccurs="0"/>
39 </xs:sequence>
40 </xs:complexType>
41 </xs:schema>
42 ');
43 begin
44 if (dbms_xdb.existsResource(:schemaPath)) then
45 dbms_xdb.deleteResource(:schemaPath);
46 end if;
47 res := dbms_xdb.createResource(:schemaPath,xmlSchema);
48 end;
49 /
PL/SQL procedure successfully completed.
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 :schemaURL,
5 xdbURIType(:schemaPath).getClob(),
6 TRUE,TRUE,FALSE,TRUE
7 );
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> CREATE TABLE TMP_XML_TABLES
2 (
3 file_name VARCHAR2(2000),
4 load_date DATE,
5 xml_document XMLType
6 )
7 XMLType COLUMN xml_document
8 XMLSchema "http://xmlns.examples.org/xdb/schemas/TDB/tables.xsd"
9 ELEMENT "Tables"
10 /
Table created.
SQL> insert into TMP_XML_TABLES values ('testcase1.xml',sysdate,xmltype(
2 '<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/T
/tables.xsd">
3 <table_name>trades</table_name>
4 <Column>
5 <Name>trade_id</Name>
6 <Type>varchar2</Type>
7 <Capacity>50</Capacity>
8 </Column>
9 <Column>
10 <Name>source</Name>
11 <Type>varchar2</Type>
12 <Capacity>100</Capacity>
13 </Column>
14 <Column>
15 <Name>trade_date</Name>
16 <Type>date</Type>
17 </Column>
18 <Column>
19 <Name>trader</Name>
20 <Type>varchar2</Type>
21 <Capacity>200</Capacity>
22 </Column>
23 <Index>
24 <Name>trades_pk</Name>
25 <Type>btree</Type>
26 </Index>
27 <Index>
28 <Name>trades_idx1</Name>
29 <Type>bitmap</Type>
30 </Index>
31 </Tables>'))
32 /
1 row created.
SQL> set long 10000 pages 0 lines 160
SQL> /
1 row created.
SQL> select * from TMP_XML_TABLES
2 /
testcase1.xml
21-APR-06
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
<Name>trade_id</Name>
<Type>varchar2</Type>
<Capacity>50</Capacity>
</Column>
<Column>
<Name>source</Name>
<Type>varchar2</Type>
<Capacity>100</Capacity>
</Column>
<Column>
<Name>trade_date</Name>
<Type>date</Type>
</Column>
<Column>
<Name>trader</Name>
<Type>varchar2</Type>
<Capacity>200</Capacity>
</Column>
<Index>
<Name>trades_pk</Name>
<Type>btree</Type>
</Index>
<Index>
<Name>trades_idx1</Name>
<Type>bitmap</Type>
</Index>
</Tables>
testcase1.xml
21-APR-06
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
<Name>trade_id</Name>
<Type>varchar2</Type>
<Capacity>50</Capacity>
</Column>
<Column>
<Name>source</Name>
<Type>varchar2</Type>
<Capacity>100</Capacity>
</Column>
<Column>
<Name>trade_date</Name>
<Type>date</Type>
</Column>
<Column>
<Name>trader</Name>
<Type>varchar2</Type>
<Capacity>200</Capacity>
</Column>
<Index>
<Name>trades_pk</Name>
<Type>btree</Type>
</Index>
<Index>
<Name>trades_idx1</Name>
<Type>bitmap</Type>
</Index>
</Tables>Since you are tracking metadata about the documents (name, date loaded) you might want to consider using the XDB repository to load the documents. The folllowing shows how you can do this from SQL and then create a view which contains the metadata and document content. The advantage of this approach is you can now load the documents using FTP or WebDAV.
SQL> declare
2 res boolean;
3 document xmltype := xmltype(
4 '<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/T
/tables.xsd">
5 <table_name>trades</table_name>
6 <Column>
7 <Name>trade_id</Name>
8 <Type>varchar2</Type>
9 <Capacity>50</Capacity>
10 </Column>
11 <Column>
12 <Name>source</Name>
13 <Type>varchar2</Type>
14 <Capacity>100</Capacity>
15 </Column>
16 <Column>
17 <Name>trade_date</Name>
18 <Type>date</Type>
19 </Column>
20 <Column>
21 <Name>trader</Name>
22 <Type>varchar2</Type>
23 <Capacity>200</Capacity>
24 </Column>
25 <Index>
26 <Name>trades_pk</Name>
27 <Type>btree</Type>
28 </Index>
29 <Index>
30 <Name>trades_idx1</Name>
31 <Type>bitmap</Type>
32 </Index>
33 </Tables>');
34 begin
35 res := dbms_xdb.createResource('/public/testcase.xml',document);
36 end;
37 /
PL/SQL procedure successfully completed.
SQL> create or replace view TMP_XML_TABLES_VIEW as
2 select extractValue(res,'/Resource/DisplayName') FILENAME,
3 extractValue(res,'/Resource/CreationDate') LOAD_DATE,
4 object_value XML_DOCUMENT
5 from RESOURCE_VIEW, TABLES_TABLE t
6 where extractValue(res,'/Resource/XMLRef')= ref(t)
7 /
View created.
SQL> select * from TABLES_TABLE
2 /
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
<Name>trade_id</Name>
<Type>varchar2</Type>
<Capacity>50</Capacity>
</Column>
<Column>
<Name>source</Name>
<Type>varchar2</Type>
<Capacity>100</Capacity>
</Column>
<Column>
<Name>trade_date</Name>
<Type>date</Type>
</Column>
<Column>
<Name>trader</Name>
<Type>varchar2</Type>
<Capacity>200</Capacity>
</Column>
<Index>
<Name>trades_pk</Name>
<Type>btree</Type>
</Index>
<Index>
<Name>trades_idx1</Name>
<Type>bitmap</Type>
</Index>
</Tables>
SQL> select * from TMP_XML_TABLES_VIEW
2 /
testcase.xml
21-APR-06 02.21.37.031000 PM
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
<Name>trade_id</Name>
<Type>varchar2</Type>
<Capacity>50</Capacity>
</Column>
<Column>
<Name>source</Name>
<Type>varchar2</Type>
<Capacity>100</Capacity>
</Column>
<Column>
<Name>trade_date</Name>
<Type>date</Type>
</Column>
<Column>
<Name>trader</Name>
<Type>varchar2</Type>
<Capacity>200</Capacity>
</Column>
<Index>
<Name>trades_pk</Name>
<Type>btree</Type>
</Index>
<Index>
<Name>trades_idx1</Name>
<Type>bitmap</Type>
</Index>
</Tables>
SQL>
SQL>
SQL> -
Itemization does not match cost component split
Hi,
I need your help or could you please shed some light as to how to fix .
A new Overhead was created, in order to add expenses to the pricing of the product. For it a variant of different pricing to which is used currently was created, and so for maintain a historic one of the information.
In addition, in the cost component Structure an adjustment of the configuration was carried out, this was done because the previous the cost component Structure contained 18 elements of costs, which the most of the elements were specified as fixed and variable costs, therefore the system only permitted the addition of 2 more elements (SAP only permits 20 elements of fixed and variable costs), nevertheless was necessary to create a total of 23 elements of costs. For it the previous elements have to be modified and to change some elements as variable costs, specifically the elements corresponding to the accounts of materials. using tcode OKTZ
The addition of 5 more elements of costs, corresponding to overhead elements, where the type 41 costs classes were configured from the plan of surcharge created.
After carrying out the changes and to transport them the client of production, when i execute the T-code ck13n an inconsistency in the previous pricings was generated, because the cost component Structure was modified and the the following one Nº message was showed: CK869 " Mat.XXX in plant XXX: itemization does not match cost component split, the report of itemization shows different values to the reports of Costed Mutilevel BOM and of Cost Components. Additionally to the error shown by the system, also is observed that to the Cost Components report a cost in the new elements of overhead was added, even when the calculation of previous cost did not contain the determination of overhead.
In order to fix the error, I modified the cost component structure as it was before and the created another cost component structure with the required changes requested by the client specifying that it should start to be current this year. However after that change the error message nºCK869 continue: Mat. XXX in plant XXX: itemization does not match cost component split. Adding to that error message, the cost of the finished product changes with reference to the calculus of the previous product after modified the configuration and that is because the cost of the semifinished product is not being taken the values of the row material, and it is appearing with cost 0 and the only value that is taking on the matter are the costs of the activities types.If you want the message to go away then you need to mark and releasse the estimate. However, there is no requirement that you do this. The message you are getting is an informational message only. You can continue without re-costing the item. If you do re-cost the material the new cost estimate will reflect and changes you've made to the components, so there is a good chance you will get a different value with the new estimate. So if that's ok, go ahead and mark and release the new estimate.
-
Error: ORA-01861: literal does not match format string
Hi,
I am doing a RFC-XI-JDBC scenario.
In the CC monitoring , i am getting this error for the reciver CC:
"Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. "TableNAMe"(structure 'STATEMENTNAME'): java.sql.SQLException: ORA-01861: literal does not match format string "
Please guide me what can be the cause and how to solve it.
Thanks,
PuneetThis is how my payload looks like :
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_JDBC_REC xmlns:ns1="https:namespace.scene3">
<STATEMENTNAME>
<TABLE_NAME action="INSERT">
<TABLE>ggclgis</TABLE>
<access>
<VALVE_ID>12584</VALVE_ID>
<EQUNR>122</EQUNR>
<ERNAM>12122</ERNAM>
<INVNR>1212</INVNR>
<GROES>1212</GROES>
<ELIEF>123</ELIEF>
<GWLEN>21-jul-2008</GWLEN>
<GWLDT>12-jun-2006</GWLDT>
<SERGE>wqwqw</SERGE>
<TYPBZ>wqwqwq</TYPBZ>
</access>
</TABLE_NAME>
</STATEMENTNAME>
</ns1:MT_JDBC_REC>
Please tell me if it looks fine. -
Sender FTP: FCC Missing Consistency check: no. of arguments does not match
Hi well my Input i as follows:
7283167S500481000000001789098
whereas my FCC in Sender-CC FTP is like:
RecordSet-Name: BestfileRecordSet
PecordSetStructure: BestFileHeader,,BestFilePos,
Recordsets per Mesage: *
KeyfieldName: BDART
BestFileHeader.fieldNames=BDKDNR,BDDSKNR,BDART
BestFileHeader.fieldFixedLenghts=4,3,1
BestFileHeader.endSeparator= 'nl'
BestFileHeader.processFieldNames= fromConfiguration
BestFileHeader.keyFieldValue=T
BestFilePos.fieldNames= BDART,BDIDENT,BDMENGE,BDFREMD
BestFilePos.fieldFixedLenghts= 1,8,7,10
BestFilePos.endSeparator= 'nl'
BestFilePos.processFieldNames= fromConfiguration
BestFilePos.keyFieldValue = S
BestfileRecordSet.endSeparator='nl'
In CC-Monitoring i get:
java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'BestFileHeader.fieldFixedLengths' or 'BestFileHeader.fieldSeparator' is missing Consistency check: no. of arguments in 'BestFileHeader.fieldFixedLength' does not match 'BestFileHeader.fieldNames' (0 <> 3)
so what is wrong?! Can sb help me?!
br JensHi Guru, i would appreciate your help. Well the data in input-structure looks like:
7283167TCARTON
7283167T
7283167S014800000000010
7283167S015823030000004
7283167S016352100000040
7283167S016792020000007
7283167S016793020000007
7283167S031502020000010
etc.
Problem is also that instead of T (header) and S (Position) there might be L,D (also for Position). Therefore i have no clue how to handle these values as keyfieldValues.
some ideas?! br Jens -
Getting descriptor version does not match runtime version error
Thanks,
I am Using Adope Air SDK2.0 and Runtime Air 1.0.7,
i have created one HelloWorld application using Adope sample
code.
When i am trying to run this using commands :
i have used : adl HelloWorld.html
i am getting this error:
invalid application descriptor: descriptor version does not
match runtime version
Plz help me out.. :-)The issue I had in Flashbuilder4 has been solved.
The easiest but possibly not the neatest was too copy the AIR 2 Beta SBK folders and files, then paste the over the flex4.0 sdk file structure. Achieves the same thing and I assume that you have copies of the SDK else where, if you need to roll back.
The other thing is to make sure the -app.xml that flex creates has the correct 2.0beta description.
Cheers
Elliot -
Routing does not match selection ID 01
Hi all,
I have query while run the costing (CK11N) for Assembly Material. Error displays as "Material X: Routing does not match selection ID 01".
This Assembly Material has Routing with 2 Direct and 5 In-direct opeartions as well as defined the Labor for Direct Operations with respect to the CC assigned in WC.
Can anyone help me out why this error occurs?
Regards,
SundhuDear Sundareswari,
Goto OKKN->select the Costing variant that you have used in CK11N and under control tab goto quantity structure control
>check the value or ID assigned for routing selection.
As per this your routing gets selected in CK11N or CK40N.
Check and revert
Regards
S Mangalraj -
Error : the class does not match the class of the persisted object
Hi I am new to Java.. I got an exception "the class does not match the class of the persisted object for cl = java.util.Vector : __SUID = -2767605614048989439, getSUID(cl) = 1".. What it implies? I got Serialized stream and Object from Web Server.. How to resolve this Exception? I nead to Deserialize this stream...
ArulPrabhu wrote:
Friend... I agree with u... Every thing Ok... I am not having the option to make change on the server side... I call a webrequest for the URI - "http://www.nseindia.com/chartdata?mkttype=N&series=EQ&symbol=RPOWER&charttype=ONLINE_STOCK".. From that i got response as Serialized Object Stream... Which is the data made available to all through their applet "Chart".. But i need it for my Custom Project.. I know the Structure of class they have serialized... Is their any chance to parce Data from that Stream..
Three words.
You are doomed.
Whatever you end up doing will not be serialization. It will be reverse engineering of a old (dead) format that could go all pear shaped on you when you least expect it. One of the worst problems in using a solution where you reverse engineer, try and guess hackery your way through a proprietary semi (or totally) undocumented format is that it is really impossible to test your code with any degree of certainty. Does your code actually work? Or does it only work because you haven't seen some totally unexpected (but legal for the format) format yet?
Get the producer to produce XML instead of "serialized" data. This is a much better route for you to go down.
If you decide to keep on your path then grab a DataInputStream and go somewhere else because you'll have to figure out the format of another languages serialized data on a place that isn't this site. -
"The class being compiled does not match the class that was imported"
----------Actions on timeline in
sixSpices/updateSite/updateSite.fla----------
import com.sixspices.updater.view.*;
var calDrawer:CalendarView = new CalendarView(); //Listener /
view
----------sixSpices/com/sixspices/updater/view/CalendarView.as
file----------
class CalendarView {
public function CalendarView(){
public function onRecieveData(listOfEvents:Array) {
displayEvents(listOfEvents);
public function displayEvents(listOfEvents:Array):Void {
trace(listOfEvents);
When I test the movie (updateSite.swf) in flash, it gives me
the error:
The class being compiled, 'CalendarView', does not match the
class that was imported,
'com.sixspices.updater.view.CalendarView'.Here is my file structure:
sixSpices
-->updateSite
-->-->updateSite.fla
-->-->updateSite.swf
-->com
-->-->sixSpices
-->-->-->updater
-->-->-->-->view
-->-->-->-->-->Calendar.as
If I move updateSite.fla to the folder sixSpices so that
"com" is in the same folder as it, I get the same error.
The following works with no problems (no similar error):
----------Actions on timeline in
sixSpices/updateSite/updateSite.fla----------
import com.sixspices.updater.model.*;
var calModel:CalendarOverview = new CalendarOverview();
//Broadcaster / model
----------sixSpices/com/sixspices/updater/model/CalendarOverview.as
file----------
import com.sixspices.updater.model.*;
import mx.utils.Delegate;
import mx.events.EventDispatcher;
class CalendarOverview {
public function CalendarOverview(){
} -
Hii ..
need help on this ..
This what I am doing ..
I am using a DATAEXPORT function to export level0 data from my essbase 11.1.2.2 to Microsoft SQL 2008 tables.
So what I did first I exported the level0 data to a flat file using DATAEXPORT and the created the SQL columns by the same in that order only in my SQL table.
When I run it fails with this error:
ODBC Layer Error: [21S01] ==> [[DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Column name or number of supplied values does not match table definition.]
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021014)
ODBC Layer Error: Native Error code [213]
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Error(1012085)
Unable to export data to SQL table [dataexp]. Check the Essbase server log and the system console to determine the cause of the problem.
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021002)
SQL Connection is Freed
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Warning(1080014)
Transaction [ 0x1c50001( 0x51ee7d66.0x80342 ) ] aborted due to status [1012085].
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1012579)
Total Calc Elapsed Time for [test.csc] : [1.44] seconds
=============================================================
I did a simple test on my Sample.basic application then ..
loaded the calc data to it and then used the below script to export to a flat file
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET DATAEXPORTOPTIONS
DataExportLevel "Level0";
DataExportOverwriteFile ON;
DataExportColFormat OFF;
DataExportDimHeader OFF;
FIX(
"Jan",
"Sales",
"Actual"
/*DATAEXPORT "File" "," "/home/hypadmin/samtest.txt";*/
DATAEXPORT "DSN" "Abhitest" "sample" "sa" "welcome1";
ENDFIX
out put as below:
"Sales"
"100-30","California"
"Jan","Actual",145
Now In sql I created only 3 columns with name Jan/Sales/Actual and when I run this script again with comments removed .. I get the same error as what I have got in my first test case with other application ..
but when I create the columns with same name as what its in export
Sales/100-30/Califirnia/Jan/Actual
It created the new rows successfully ..
So with this I think the error which I am getting with my other application might be because of the same column issue .. but then I have created all the columns by looking at the export file only as I did in sample ..
Any idea would be helpful ..
Thanks
Abhishek
IFirst make sure you add
DataExportRelationalFile ON;
to your set commands it is missing
I alwats like to also add
DataExportColHeader dimensionName;
so I am sure what dimension is getting put into the columns.
Then count the number of dimensions in your outline (exclude attribute dimensions). You need at least that many columns in your table -1 + the number of members you will be returning as columns in the export
Taking your example Sample basic has 5 dimensions
Measures
Years
Scenario
Product
Market
Since you did not specify a dataexportcolheader it took the dense dimension Scenario as the columns. Your fix statement is limiting that to one member. Doing the math
5 -1 + 1 = 5 columns in your table which is what you found works. Suppose you fixed on bothe Actual and budget in scenario then you would need 6 columns 5 -1 +2 -
Setup for testing server "the prefix does not match.."
I am just getting started using Adobe Dreamweaver CS3
with AppServ (Apache, Php, MySQL).
Im using Windows XP Service Pack 2 and and test it on the
same computer.(localhost)
I created a folder on my hard drive
C:\AppServ\www\MyLocalSite.
Here´s the setup under the Advanced tab in Dreamweaver:
Server model:
php Mysql
Acess:
local network
Testing server folder:
AppServ/www
URL Prefix:
http://localhost/MyLocalSite
When I click OK, the following message is displayed:
The site URL Prefix for the testing server does not
match..
I have run a lot of sites on my localhost but never ever
get this unusual message.
The worst is - I cant use the Recordset with Bindings in
Dreamweaver CS3 if I dont solve this weird "prefix" problem.
I ´ve tried a lot of workaround solutions but always end
up with the message
that prompt "the prefix does not match.."
Is it a bug or what?
I appreciate every answer
Update
21:47.................................................................................... .
I´ve tried to configure a connection to the database
and I end up with this message:
1) There is no testing server running on the server machine
2) The testing server specified for this site does not map
the
http://localhost:80/myLocalSite/_mmServerScripts/MMHTTPDB.php
URL.
Verify that the Prefix maps to the root of the site
The server is running and is working when I request my local
site in IE 7:
localhost/myLocalSite/index.phpI too had been experiencing this problem after installing XP
service pack 3 last week.
Too fix this issue I had re-assign all file permissions to my
root web folder.
Remove all permissions and re-assign the groups
administrators, authenticated users and everyone FULL CONTROL of
this folder.
Click the advanced button and make sure permissions are not
being inherited from the parent folder.
Then select the option to re-assign all permissions to all
child files/folders.
Good luck.
Maybe you are looking for
-
How to migrate some page from a workspace to another workspace
APEX 4.0.2.00.07 Oracle 10.1.2.0.0 I have 2 workspaces, the one regard as Dev env, another regard as Pro. env. When the change need to be migrated, the some page of Dev workspace should be copy to Pro. one. I export the pages what I want to move from
-
Problems with sharing internet connection via usb
I have been sharing the internet connection on my iPhone 5 via usb to a PC for a few years. When updating to iOS 8.3 and iTunes to 12.1 (from iOS 6 if I remember correctly) the internet sharing through usb stopped working. Sharing through wifi works
-
Disable Window keys ALT+TAB, CTRL+ALT+DEL
Hello i am developing an application in which i need to catch the ALT+TAB and CTRLALT+DEL key events and handle it in my own way. The default action of showing the next window or the task manager should not take place. In the event handler i have giv
-
Hi Experts, I have an output with checkboxes and spoolnumber,Descrip,date, etc and i have a user-command button 'click' and when i select the 1 checkbox or many checkboxes against the spoolnumbers in output, i need to pass the spoolnumber values aga
-
Configuring Oracle 9i forms [icons] urgent
Please could any one help me point to the URL of the white paper that deals on how to configure icons in Oracle 9i forms or better still, give me a clue on how to go about this. Thanks