Structure of the queue MCEX11

Hello Experts,
May I know the structure of the queue MCEX11? The reason behind this question is..MCEX11 supplies data to all '11' related extractors, for ex: 2LIS_11_VAHDR and 2LIS_11_VAITM. Each of these extractors have their own structures (MC11VA0HDR and MC11VA0ITM resp.). Because of the fact that MCEX11 supplies data to all these extractors, I would assume the structure of it is a combination of all the structures of the extractors that it supplies data to. Am I right in assuming so?
Thanks in advance.
-David.

Any help on this please?

Similar Messages

  • How to treat error handling in the consumer loop in the queue message handler structure?

    Hi,
    I'd like to know how to stop the producer loop(event loop) in the QMH structure when the error happened in the consumer loop.
    I've construct a demo code by myself as the attached image, but it's a pity that I have to create a recdundant indicator "End" to trigger the value change event to stop the program. This is not a good way to do it. Could someone give me some better idea how to deal with it? Very appreciated to you sharing ideas.

    Concerning your doubts about the "traditional" implementation of this pattern, I hear you. As I have written many times before, its main benefit is that it is easy to explain in a training class. It unfortunately has a lot of drawbacks.
    Tim's suggestion about User Events, is a good one. But to use it to the best advantage, you will need to get away from having everything on one block diagram. If you think about it there is no real need for the two loops to be on the same block diagram and a lot of really good reasons for them not to be. For example, if they are in separate VIs, they can both be event driven and any communication problems between loops evaporates.
    Its also more modular, easier to maintain, more reusable, etc...
    Check the link in my signature.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Maximum size of the Queue data structure

    Hi All,
    I would like to know what is the maximum size of the Queue?
    Thanks,
    Girish G

    What does the documentation for the Queue interface say? and the Javadoc for the 11 classes that implement it?

  • Appropiate way for sending an XML Structured file to the Queue

    Hi
    I am reading all my Database Table data and construcing an XML file .
    Now i want to send this XML file to the MQ (Queue ) as destination .
    Please tell me what will be the best approach in these two cases :
    1. Construct an XML file and store it in a drive (say with file name as Ravi.xml) and then pick that with the help of File API and send it as an attachment to the Queue
    (I dont whether this is possible also sending a attachment to the Queue )
    2.Use the ByteMessage /TextMessage Construct an XML file dynamically with the help of DOM API and post that Message to the Queue .
    Please help . I am still doing R&D on this .

    duplicate post. http://forums.sun.com/thread.jspa?messageID=10896758&#10896758

  • Can I have multiple event structures with the same event cases?

    Hello, 
    I'm doing an application that reproduces the front panel of the HP6675A power supply. To achieve this, I have done a state machine with different states
    (initialize, measures, voltage, current, ocp, ov, store, recall, etc). In each state, should have an event structure that catches the events of the buttons, like for example: if the current state is the Voltage mode and the user press the current button the next state will be the Current mode. For this in each state of the state machine should be the same event structure with the same events.
    My problem is that the Vi doesn't work properly when I have multiple event structures with the same event cases. There are some possibily to do this, and how? Or is impossible to have multiple events? I have been reading some posts, but I don't find solutions. 
    Any help is appreciated.
    Thank you very much.
    Solved!
    Go to Solution.

    natasftw wrote:
    Or as others mentioned, make two parallel loops.  In one loop, have your state machine.  In the other, have just the Event Handler.  Pass the events from the handler to the state machine by way of queues.
    A proper state machine will not need the second loop.  The "Wait For Event" or "Idle" state (whatever you want to call it) is all you really need in order to catch the user button presses.  The setup is almost there.  Maybe add a shift register to keep track of which state to go to in the case of a timeout on the Event Structure.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • MQ Adapter does not clear the rejected message from the queue

    Hi All,
    I'm using a MQ Adapter to fetch the message from the queue without any Backout queue configured. However, whenever there is any bad structured message found in the queue, MQ adapter rejects the message and moves the message to the rejmsg folder but does not clear it off the queue, as a result of which it keeps retrying the same hence, filling the logs and the physical memory. Somehow we do not have any backout queue configured so I can move the message to blackout queue. I have tried configuring the jca retry properties and global jca retry as well but to no avail.
    - Is it not the default behaviour of MQ Adapter to remove the rejected message from the queue irrespective of Backout queue is configured or not? The same behaviour working well with the JMS and File Adapter though.
    - Is there any way I can make MQ Adapter delete the message from that queue once it is rejected?
    Regards,
    Neeraj Sehgal

    Hi Jayson,
    Check this URL which answers a problem with com.sap.engine.boot.loader.ResourceMultiParentClassLoader problem:
    http://209.85.175.132/search?q=cache:RnFZ9viwuKkJ:https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.sdn.folder.sdn!2fcom.sap.sdn.folder.application!2fcom.sap.sdn.folder.roles!2fcom.sap.sdn.folder.navigationroles!2fcom.sap.sdn.role.anonymous!2fcom.sap.sdn.tln.workset.forums!2fforumtest!2fcom.sap.sdn.app.iview.forumthread%3FQuickLink%3Dthread%26tstart%3D45%26threadID%3D1020700+com.sap.engine.boot.loader.ResourceMultiParentClassLoader&hl=en&ct=clnk&cd=3&gl=in&client=firefox-a
    Please check that the JDK compliance level is at 5.0
    Window->Preferences->Java->Compiler->Compiler compliance level set this to 5.0
    Set the installed JRE to the one you have mentioned JDK 5.0 update 16
    Window->Preferences->Java->Installed JRE's->
    Click on the add button to select the path of your JDK.
    once completed click on the check box next to it.
    regards,
    AKD

  • Why do we de-activate the extract structure  in the LO extraction?

    Hi,
      plz let me know
    why do we de-activate the extract structure  in the LO extraction?
    what are preventive steps to be taken for duplicate records?
    Regards,
    Madhavi

    Hi,
    Why do you think that the deactivation is necessary step. Generally we donot activate the unrequired Extraction structures to avoid collecting of data in queues(in case of LO ). But we never deactivate the ES in any process intentionally. Ya, the ES turns into yellow(inactive) if we modify the ES in LBWE, but we make it active immediately as the part of process.
    With rgds,
    Anil Kumar Sharma .P

  • Regarding LIS Extract Structure and Delta Queues

    Hi All,
    We are extracting data using 2LIS_01_S001. But we are unable to pull Delta loads. When we verified we found that the structure (Fields)of the Delta queues are not in same order as S001 table. So, we modified the structures of delta queues using the access key. Now the order of fields in S001, S001BIW1 and S001BIW1 are all same. Till now I was unable to load the deltas for the data source. Now my doubt is should I have to do the LIS setups again (Statistical Information Setup)or can I do a Full Load and do deltas directly???

    Hi,
    You have to setup the tables once again.If your requirement is to load the customer data donot depend on LIS because there are lot of problems with this LIS.SAP is not recommending this LIS.Simply load customer attribute data and load transaction LOS also.
    This is a better option.
    Hope this helps.
    Assign points if useful.
    Regards,
    venkat

  • Media Encoder CC won't import a JPEG sequence to the queue

    I am running Media Encoder CC 7.2.2.29 (64-bit) on OSX 10.9.4.
    I have a JPEG sequence GoPro timelapse image sequence that I want to encode into a video clip. All files have a .jpg extension. They are 4000x3000 and have an RGB color space. The Color profile is SRGB IEC61966-21. All images are 3.9MB.
    According to the ME help I should do the following.
    To add an image sequence, choose File > Add Source. In the Open dialog box, choose the first file of the image sequence. Enable the  Sequence Import checkbox for your file type, and then click the Open button.
    I follow the instructions and select the first image in the sequence. The "JPEG File Sequence" checkbox is active and I check it and click the Open button. The dialog disappears and nothing happens. There are no warnings.
    How does one get JPEG sequences to import to the queue?
    Please advise.
    -Travis

    Yes, import into premiere work fine. The nice part about using AME directly is you don't have to have to create a project or use an old one every time you want to crunch a timelapse. Also, AME has this nice feature where it will autoname the output file IMG[FirstStill]-[LastStill] (ie IMG[GP001234-GP001297]). This was helpful because GoPros change the first number in the sequence every time you stop and start time lapse.

  • How to  add new  fields or structure in  the Satandard Receiver Strucutre.

    Hi,
    I have a requirement, that  ECC to SNC . IDoc with new segment needs to be placed in the target SAP Standard Structure. How to achieve this.
    Regards,
    Srinivas.

    Hi Michal,
    Thanks for your response.
    Here is the complete requirement.
    Customer asked to have a structure in DeliveryScheduleNotification to populate ZSEGMENT values from IDoc.
    I have added new structure to the Data type in a separate SWCV and new Name Space.
    Maintained Dependency with SNC.
    I am not able to see any  interface under my SWCV  while doing  Interface determination Step in ID.
    Please help me.
    Thanks in Advance.
    sreeni
    Edited by: Sreenivas Reddy on Jun 6, 2009 2:16 PM

  • Backing Up and Restoring the Message Store v.s. the queue

    Hello,
    We are running iPlanet 5.2 Messaging Server and need to migrate to another (duplicate) 5.2 Messaging Server. We have all the software installed and the LDAP user accounts created. Now we just need to move the existing mail from one server to the other.
    I found the Backing Up and Restoring the Message Store section in the Admin Guide says to back up and restore your data, Messaging Server provides the imsbackup and imsrestore utilities.
    However I am wondering about the Queue?
    Under <instance>/imta/queue
    What is the difference between the Message Store
    and the Queue? Can I just backup and restore the Queue using tar or cpio?
    Thanks in advance for any advice.
    Regards,
    Tim

    Hello,
    We are running iPlanet 5.2 Messaging Server and need
    to migrate to another (duplicate) 5.2 Messaging
    Server. We have all the software installed and the
    LDAP user accounts created. Now we just need to move
    the existing mail from one server to the other.
    I found the Backing Up and Restoring the Message
    Store section in the Admin Guide says to back up and
    restore your data, Messaging Server provides the
    imsbackup and imsrestore utilities.
    However I am wondering about the Queue?
    Under <instance>/imta/queue
    What is the difference between the Message Store
    and the Queue? The Message Store is where messages get delivered to, so you can read them.'
    The queue is where messages are temporarily stored, pending delivery to wherever they go.
    You can use tar, cpio, or what have you for the queue. Stop the server first. . .
    You then just restore the files to the new server. No need to restart or anything like that. Just dump the files in, and run
    imsimta cache -sync
    to tell the MTA to re-read the queue.
    Can I just backup and restore the
    Queue using tar or cpio?
    Thanks in advance for any advice.
    Regards,
    Tim

  • We need to open the connection each time you read a message from the queue?

    Hi
    I have a doubt regarding my queue read data that contains those I create a session and connection.
    Whenever I do this or you can create a connection and get all data from the queue and then close the connection and session
    eg. I have 1000 files in the queue and I read all files but without creating a session and a connection every time you get a single figure, this can be done?
    I read the 1000 files without having close the session or the connection
    thanks for the help.

    I answered myself.
    No need to open a connection and a session each to be read from a data queue to extract the entire contents of the queue with only one session and open a single connection.

  • How to get the job logs from sm35 by using the queue id and session name?

    hi all,
    can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
    FYI..
    i want to read this job log and i want to send it to an email id.
    -> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module  job_close.
    but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
    thanks in advance,
    koushik

    Hi Bharath,
    If you want to download it to the local file then you can follow the instructions in the below link.
    How to download Batch Input Session Log?
    Regards,
    Sachin

  • How to cancel printing jobs that are in the queue? Model is : HP Laserjet 3055

    I wanted to print a 200 page book from my laptop, so I pluged in the printer to the laptop and pressed print on laptop. Then immediately decided not to print it, so I pressed cancel on printer. But the job has not been canceled at all. Every time I try to print something the it always starts with the job I wanted to cancel in the beginning. And on the laptop the message block asks if I wish to add to printing queue. 
    I would like to cancel the job that is sitting in the queue on the printer for good, if anyone can advise please help me, very desperate!!!
    Thank you 
    Robertha
    This question was solved.
    View Solution.

    Hi Robertha,
    Open the printers folder, and then double click on the printer. Click printer, and then cancel all documents.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • The row structure of the table BANFTAB is incorrect

    Dear Experts,
    I get right here the error message
    The row structure of the table BANFTAB is incorrect
    ZBANFN is a table type and has the line tab BANFN.
    Can you pls tell me what is wrong here ?
    FUNCTION Z_CHANGE_EBAKZ_FLAG.
    *"*"Lokale Schnittstelle:
    *"  CHANGING
    *"     VALUE(BANFTAB) TYPE  ZBANFN
      data lt_eban type table of eban.
      data ls_eban type eban.
      SELECT * FROM eban into table lt_eban where BANFN IN BANFTAB AND EBAKZ EQ 'X'.
      IF SY-SUBRC IS INITIAL.
        LOOP AT lt_eban INTO ls_eban .
          ls_eban-EBAKZ = ' '.
          modify eban from ls_eban.
        ENDLOOP.
      ENDIF.
    ENDFUNCTION.

    Hello,
    You have to use a ranges table in this case.
    FUNCTION Z_CHANGE_EBAKZ_FLAG.
    *"*"Lokale Schnittstelle:
    *"  CHANGING
    *"     VALUE(BANFTAB) TYPE  ZBANFN
      data:lt_eban type table of eban.
      data:ls_eban type eban.
    data:
    l_r_banfn type range of banfn,
    l_wa_banfn like line of l_r_banfn,
    l_wa_banftab like likne of BANFTAB.
    loop at banftab into l_wa_banftab.
    l_wa_banfn-sign = 'I'.
    l_wa_banfn-option = 'EQ'.
    l_wa_banfn-low = l_wa_banftab-banfn.
    append l_wa_banfn into l_r_banfn.
    clear l_wa_banfn.
    endloop.
      SELECT * FROM eban into table lt_eban
      where
      BANFN IN L_R_BANFN "BANFN IN BANFTAB
    AND EBAKZ EQ 'X'.
      IF SY-SUBRC IS INITIAL.
        LOOP AT lt_eban INTO ls_eban .
          ls_eban-EBAKZ = ' '.
          modify eban from ls_eban.
        ENDLOOP.
      ENDIF.
    ENDFUNCTION.
    or you can use FOR ALL ENTRIES :
    FUNCTION Z_CHANGE_EBAKZ_FLAG.
    *"*"Lokale Schnittstelle:
    *"  CHANGING
    *"     VALUE(BANFTAB) TYPE  ZBANFN
      data lt_eban type table of eban.
      data ls_eban type eban.
      SELECT * FROM eban into table lt_eban
      FOR ALL ENTRIES IN BANFTAB "--> Add this
      where BANFN = BANFTAB-BANFN
      AND EBAKZ EQ 'X'.
      IF SY-SUBRC IS INITIAL.
        LOOP AT lt_eban INTO ls_eban .
          ls_eban-EBAKZ = ' '.
          modify eban from ls_eban.
        ENDLOOP.
      ENDIF.
    ENDFUNCTION.
    Try this & let me know in case of any issues.
    BR,
    Suhas
    Edited by: Suhas Saha on Feb 10, 2009 5:43 PM

Maybe you are looking for