Stuck in EHP7 - Phase MAIN_TRANSEXEC/MVNTAB_TRANS on HANA
Dear Gurus,
I am updating my ERP from EHP6 SPS9 to EHP7 SPS3 on HANA.
Before starting the update i went through the below note:
EHP7 FOR ERP 6.0: HANA Content Sanity Check Before Update
I am now stuck in the Phase MAIN_TRANSEXEC/MVNTAB_TRANS.
I request your help in resolving the issue.
The logs says:
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2014/05/05 05:10:02")
2 ETP301 ----------------------------------------------------------------------
2 ETP000 processing modeflag 'V'
2 ETP301 ----------------------------------------------------------------------
2 ETP330XActivation of Shadownametabs with DDL
2 ETP301 ----------------------------------------------------------------------
3 ETP379X05:10:02: activating Nametab "PPH_MRP_CHECKBUF":
2 ETP000 >> Name of inactive nametab to read : DDXTT
2 ETP000 >> Format of inactive nametab to read: 5.0
3 ETP355Xstatements:
3 ETP000 CREATE SYNONYM "PPH_MRP_CHECKBUF" FOR
3 ETP000 _SYS_BIC."sap.erp.sappl.pph.v02.read.buffer/CA_MRP_CHECK_BUFFER_3"
3 ETP000
2WETP000 05:10:02: Retcode 1: error in DDL statement for "PPH_MRP_CHECKBUF " - repeat
2EETP345 05:10:14: Retcode 1: SQL-error "258-insufficient privilege: Not authorized" in DDL stateme
2EETP345 nt for "PPH_MRP_CHECKBUF "
2 ETP000 --------------- DB-ROLLBACK() ---------------
2EETP334 05:10:14: error in DDL, nametab for "PPH_MRP_CHECKBUF" not activated
3 ETP379X05:10:14: activating Nametab "PUREQITEM":
3 ETP355Xstatements:
3 ETP000 CREATE SYNONYM "PUREQITEM" FOR
3 ETP000 _SYS_BIC."sap.erp.sappl.mm.pur.me/AT_MM_PUR_REQ_ITEM"
3 ETP000
2WETP000 05:10:14: Retcode 1: error in DDL statement for "PUREQITEM " - repeat
2EETP345 05:10:26: Retcode 1: SQL-error "258-insufficient privilege: Not authorized" in DDL stateme
2EETP345 nt for "PUREQITEM "
2 ETP000 --------------- DB-ROLLBACK() ---------------
2EETP334 05:10:26: error in DDL, nametab for "PUREQITEM" not activated
3 ETP379X05:10:26: activating Nametab "POHVAL":
3 ETP355Xstatements:
3 ETP000 CREATE SYNONYM "POHVAL" FOR
3 ETP000 _SYS_BIC."sap.erp.sappl.mm.pur.po-history/AC_MM_PUR_PO_HISTORY_VALUE"
3 ETP000
2WETP000 05:10:26: Retcode 1: error in DDL statement for "POHVAL " - repeat
2EETP345 05:10:38: Retcode 1: SQL-error "258-insufficient privilege: Not authorized" in DDL stateme
2EETP345 nt for "POHVAL "
2 ETP000 --------------- DB-ROLLBACK() ---------------
2EETP334 05:10:38: error in DDL, nametab for "POHVAL" not activated
2 ETP301 ----------------------------------------------------------------------
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
2 ETP362 "3" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2014/05/05 05:10:02")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2014/05/05 05:10:38")
2 ETP301 ----------------------------------------------------------------------
1 ETP180 UNKNOWN ACTION
1 ETP110 end date and time : "20140505051038"
1 ETP111 exit code : "8"
1 ETP199 ######################################
After activating the trace (http://service.sap.com/sap/support/notes/1809199) I could find the below information.
The logs for the error message are attached.
[42424]{240720}[153/-1] 2014-05-05 06:20:50.367339 i TraceContext
TraceContext.cpp(00699) : UserName=SAPERH, ApplicationName=ABAP:ERH
[42424]{240720}[153/-1] 2014-05-05 06:20:50.360147 i Authorization
SQLFacade.cpp(01061) : UserId(5465697) is not authorized because invalid privilege 24 on ObjectId(3,0,oid=5305743)
[42424]{240720}[153/-1] 2014-05-05 06:20:50.367373 i Authorization
SQLFacade.cpp(01493) :
system-action : none
SCHEMA-140901-_SYS_BIC : {} , {SQL_ACT_SELECT}
VIEW-5305743-sap.erp.sappl.pph.v02.read.buffer/CA_MRP_CHECK_BUFFER_3 : {SQL_ACT_SELECT} , {}
SCHEMA-5465698-SAPERH : {SQL_ACT_CREATE_SYNONYM} , {}
[42424]{240720}[153/-1] 2014-05-05 06:20:50.367586 i Authorization
query_check.cc(02440) : User SAPERH tried to execute 'CREATE SYNONYM "PPH_MRP_CHECKBUF" FOR _SYS_BIC."sap.erp.sappl.pph.v02.read.buffer/CA_MRP_CHECK_BUFFER_3"
[42424]{240720}[153/-1] 2014-05-05 06:20:53.354006 i TraceContext
TraceContext.cpp(00699) : UserName=SAPERH, ApplicationName=ABAP:ERH
[42424]{240720}[153/-1] 2014-05-05 06:20:53.353981 i Authorization
SQLFacade.cpp(01061) : UserId(5465697) is not authorized because invalid privilege 24 on ObjectId(3,0,oid=5305743)
[42424]{240720}[153/-1] 2014-05-05 06:20:53.354037 i Authorization
SQLFacade.cpp(01493) :
system-action : none
SCHEMA-140901-_SYS_BIC : {} , {SQL_ACT_SELECT}
VIEW-5305743-sap.erp.sappl.pph.v02.read.buffer/CA_MRP_CHECK_BUFFER_3 : {SQL_ACT_SELECT} , {}
SCHEMA-5465698-SAPERH : {SQL_ACT_CREATE_SYNONYM} , {}
[42424]{240720}[153/-1] 2014-05-05 06:20:53.354065 i Authorization
query_check.cc(02440) : User SAPERH tried to execute 'CREATE SYNONYM "PPH_MRP_CHECKBUF" FOR _SYS_BIC."sap.erp.sappl.pph.v02.read.buffer/CA_MRP_CHECK_BUFFER_3"
[42424]{240720}[153/-1] 2014-05-05 06:20:56.347913 i TraceContext
TraceContext.cpp(00699) : UserName=SAPERH, ApplicationName=ABAP:ERH
[42424]{240720}[153/-1] 2014-05-05 06:20:56.347888 i Authorization
SQLFacade.cpp(01061) : UserId(5465697) is not authorized because invalid privilege 24 on ObjectId(3,0,oid=5305743)
[42424]{240720}[153/-1] 2014-05-05 06:20:56.347939 i Authorization
SQLFacade.cpp(01493) :
system-action : none
SCHEMA-140901-_SYS_BIC : {} , {SQL_ACT_SELECT}
VIEW-5305743-sap.erp.sappl.pph.v02.read.buffer/CA_MRP_CHECK_BUFFER_3 : {SQL_ACT_SELECT} , {}
SCHEMA-5465698-SAPERH : {SQL_ACT_CREATE_SYNONYM} , {}
[42424]{240720}[153/-1] 2014-05-05 06:20:56.347959 i Authorization
query_check.cc(02440) : User SAPERH tried to execute 'CREATE SYNONYM "PPH_MRP_CHECKBUF" FOR _SYS_BIC."sap.erp.sappl.pph.v02.read.buffer/CA_MRP_CHECK_BUFFER_3"
[42424]{240720}[153/-1] 2014-05-05 06:20:59.352620 i TraceContext
TraceContext.cpp(00699) : UserName=SAPERH, ApplicationName=ABAP:ERH
[42424]{240720}[153/-1] 2014-05-05 06:20:59.352596 i Authorization
SQLFacade.cpp(01061) : UserId(5465697) is not authorized because invalid privilege 24 on ObjectId(3,0,oid=5305743)
[42424]{240720}[153/-1] 2014-05-05 06:20:59.352645 i Authorization
SQLFacade.cpp(01493) :
system-action : none
Please guide what authorization is to be provided to the user SAPERH.
Version Details:
Hana: 1.00.70.00.386119
Please help me know if i have missed any information, so that i can provide the same.
Thank you in advance.
Kind Regards,
Anuj
Hi Anuj
Could you check this SAP Notes
1897236 - HANA: Error "insufficient privilege
1989884 - DBPROC_SQL_ERROR / Error 258 while executing database procedure
BR
SS
Similar Messages
-
Check printing "Format Payment Instructions" stuck at printing phase
Hi,
One of our end users is complaining that he is running a Check Print Request (Format Payment Instructions), which is running since morning, though it completes within 2 minutes.
when i checked the logfile, i found that the request processing was completed successfully and the request is stuck at printing phase:
Request log:
Successfully executed PL/SQL.
Exit: iby.scheduler.FDExtractAndFormatting.unlockInstruction()
Request Completed Normally
Enter: iby.scheduler.FDExtractAndFormatting.queryAcpLtr
Accompanying letter format code: null
End time: Wed Jan 12 10:09:41 GST 2011
Time elapsed: 3459
Time elapsed: 0 min 3 sec 459 ms
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 23800025
Number of copies : 1
Printer : ptfchqprn
Since morning, the request is running and log is showing the same message.
Now, the user is saying that till 2 days back, he was able to print the checks via the same printer.
Here is the log of the same request ran by the same user. This request printed the check successfully.
Successfully executed PL/SQL.
Exit: iby.scheduler.FDExtractAndFormatting.unlockInstruction()
Request Completed Normally
Enter: iby.scheduler.FDExtractAndFormatting.queryAcpLtr
Accompanying letter format code: null
End time: Mon Jan 10 11:37:30 GST 2011
Time elapsed: 2339
Time elapsed: 0 min 2 sec 339 ms
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 23783976
Number of copies : 1
Printer : ptfchqprn
Finished executing request completion options.
I verified that the printer is working fine. I was able to print the sample file from OS and also the Active User Request output.
Also, the same request if printed via other check printers, is going fine and users are able to print the check.
Also, when i checked the OPP log, i did not find any messages for this request that the XML publisher has worked on it to convert it to PDF, the desired format.
Can someone help me with this.
thanks.What is the application release? OS?
- solaris sparc - 64, R12.1.1, on 2 node RAC 11g
Since morning, the request is running and log is showing the same message.
Have you tried to submit the request again?
- Yes, more than twice.
Now, the user is saying that till 2 days back, he was able to print the checks via the same printer.
What if you submit the request as another user and print to the same printer?
- That I have to check with the Users.
I verified that the printer is working fine. I was able to print the sample file from OS and also the Active User Request output.
Any stuck jobs in the printer queue?
- We restarted the printer too and fired new jobs. All is fine.
Also, the same request if printed via other check printers, is going fine and users are able to print the check.
Since you are able to print the same request to some other printer, and you are able to print to the same printer from the OS/Application, then most probably this is an issue with that specific concurrent request (not concurrent program). Also, please check if you have any locks in the database (bounce the CM/Database if possible and try again).
- CM and Database are brought down at night and then started in the morning every night. So DB and CM have been bounced twice since the issue was reported.
Hussain, how can we check the issue with Conc Request, if any. -
SSIS Package stuck at validation phase in active batch and running forever.
Hello Team -
There is a peculiar situation where an SSIS package has been running forever in active batch (cmd). It is stuck at validation phase . However upon restart it executes normally . The scenario occurs intermittently like once in a week or two. There is also
no blocking or locks on the server.
Please give your inputs. Have a nice day.
Happy to help! Thanks. Regards and good Wishes, Deepak. http://deepaksqlmsbusinessintelligence.blogspot.com/But it does execute on a manual run from the job. I saw several other threads in a similar fashion , and there are solutions but those look inappropriate and temporary and do not deal with active batch ( dtexec) , looking for a standard and a permanant
solution and whether there are any service packs or patches? Its SSIS 2008 and AB8.
Happy to help! Thanks. Regards and good Wishes, Deepak. http://deepaksqlmsbusinessintelligence.blogspot.com/ -
Content Deployment Job Stuck on Exporting Phase
I have my one site collection and i executed content deployment jon on that site collect and skip one site named current vaccancies which include 4500 Pages , images , etc.
I created another job for that skipped site to deploy content on production. But whenever i run Job my kob stuck on export phase always on this site. What is reason...
Please help me ..Hi,
You can check event viewer -> Application logs to check event id 4958, 5323, 5325, 5335...then please follow URL
http://technet.microsoft.com/en-us/library/ee924661(v=office.14).aspx
Best practices for content deployment
http://technet.microsoft.com/en-us/library/hh292621(v=office.14).aspx
You can post your error, so we can help you further !!
Regards
Prasad Tandel -
Pictures sent to my iphone 6 via text messaging are stuck in downloading phase
Pictures that are being sent to me via text messaging are stuck in "downloading" phase. I can not receive any pictures on my new iphone6. Is anyone else experencing this?
Found a great post that had a bunch of possible solutions (over at https://uk.answers.yahoo.com/question/index?qid=20131217195803AAOe6WV )
Lucky for me the first one worked--went into settings->messages and turned iMessage off, waited a few seconds, turned it back on. Images came through just fine after that. We'll see if it lasts. -
EHP7 Upgrade stuck in NTACT_ALTNT Phase
Dear Experts,
Am stuck in the upgrade NTACT_ALTNT phase of the EHP7 upgrade
Source: SAP ECC6.0
Target: SAP ECC 6.0 EHP7
In the preprocessing phase got an error in the MAIN_SHDIMP/SUBMOD_SHD2_RUN/NTACT_ALTNT phase. Please find the logs below.
ANTCPINT and RETURN CODE in PN810331.EV0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3 ETP399Xcopy nt "CNVCHECKPROFILES":
3 ETP399 done. (T/F Src: T/T)
3 ETP399Xcopy nt "CNVCHECKTMPDUPL":
3 ETP399 done. (T/F Src: T/T)
3 ETP399Xcopy nt "CNVCLU":
2EETP399XRead table "CNVCLU ": pgntab call: table not found.
2AETP399 Table "CNVCLU": unknown error -9
3 ETP399Xcopy nt "CNV_00001_SIMMON":
3 ETP399 done. (T/F Src: T/T)
3 ETP399Xcopy nt "CNV_00001_STATUS":
3 ETP399 done. (T/F Src: T/T)
3 ETP399Xcopy nt "CNV_00001_USR":
2EETP399XRead table "CNV_00001_USR ": pgntab call: table not found.
2AETP399 Table "CNV_00001_USR": unknown error -9
1 ETP111 exit code : "12"
When i checked the tables CNVCLU and CNV_00001_USR in actual instance 000 client. Am able to see the table in SE14 in NOT ACTIVE state. However in SE11 it showed table doesnt exist.
Already check the note 719989 - SLO: Deleting data from CNVCLU after conversion but am unable to delete the same. All the fields in the SE14 is inactive.
Please let me know to resolve this issue.
Regards,
Raja. GSriram,
Thanks for the information.
The note 1910297 - ABAP Update halted in preprocessing step mentioned to reset the update and apply the patch.
Am in 37 Patch level higher than the version. However the error is smilar to the one mentioned in the note.
I just got this error for 2 tables only not for many tables. These tables related to SLO.
Regards,
Raja. G -
We are Upgrading SRM Development Server . ( Oracle 10G on HPUX)
My PREPARE Phase is Running IMPORT Module NPREPCRE0 Subphase .
This Phase is running from more than 24 hr .
As per document ( Upgrade Guide I cannot Stop PREPARE in these phase .)
Please Find the SAPupCheck Logs
********START******************
************************* SAPup started in PREPARE mode *************************
This is SAPup version 7.00/2 patch level 24.067.
Environment for SAPup:
SAPSID = SRD
SAPHOST = eux353
STARTPATH =
KERNPATH = /usr/sap/SRD/SYS/exe/run
PROFPATH = /usr/sap/SRD/SYS/profile
LOCAL SLOG =
LOCAL SLOG (OLD) =
CENTRAL SLOG =
CENTRAL SLOG (OLD) =
EPS INBOX =
EPS ROOT =
DBASID =
DBAHOST =
DBAPWD = <NOT REPORTED>
NR R3TRANS = 3
NR R3LOAD = 1
IMPORT DESTTIME = 86400
STARTR3 = ""
STARTPARAMS R3 = ""
STOPR3 = ""
STOPPARAMS R3 = ""
STARTDB = ""
STARTPARAMS DB = ""
STOPDB = ""
STOPPARAMS DB = ""
UPGRADE USER =
UPGRADE LANGUAGE = E
SLOGNAME = SLOG
ALOGNAME = ALOG
SYSNUM =
PROFNAME =
DDIC PWD = <NOT REPORTED>
GATEWAY HOST =
GATEWAY SERVICE =
MS SERVICE = 0
SLOW SHADOW IMPORT = Y
MAX BUFREFTIME = 120
BATCH HOST =
NR BTC-PROCS INTERN = 3
CUSTOMER GENERATION = 0
SAP START PROFILE =
DEFPROFNAME =
OSTYPE = HP-UX IA64
OSVERS = 11.23
DESTVERS = 700
COMPDESTVERS = PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_BASIS=700,SAP_BW=700,SRM_PLUS=550,SRM_SERVER=550,ST-PI=2005_1_700
SUBSTSTVERS = 700
COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_BW=700,SRM_SERVER=550
DESTPRODSHORTID = R/3
DESTPRODSHORTREL = 700
IMPORT LANGUAGES =
DB REPSWITCH PAR = NOT_SPECIFIED
PARALLEL DDLNTABS = 0
TABLSIZE = 0
KERNEL BIT SELECTION = 64 bit, no choice
SHD INSTANCE NUMBER =
SHD send d talk port = -1
SHD send d listen port = -1
SHD collect d listen port = -1
SHD collect d talk port = -1
SHD GW SERVICE =
SHD MS SERVICE =
SHD HOST =
SHD GW HOST =
SHD STARTPATH = /usr/sap/put/SRD/homeshd/SRD
SHD R3 START PROFILE =
SHD PROFILE PATH = /usr/sap/put/SRD/SYS/profile
SHD PROFILE NAME =
SHD startsap =
SHD stopsap =
SHD workpath =
SHD kernpath = /usr/sap/put/exe
dba schema =
dba shd schema =
connect env string =
REMOTE UPGRADE DIRECTORY =
SAP SERVICE ACCOUNT =
SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
Original shadow profile =
PREPARE STARTED AT 20080107072449 ***
...begin dialogue at 20080107072450
...end dialogue at 20080107072516
...begin dialogue at 20080107072519
...end dialogue at 20080107072529
...begin dialogue at 20080107072529
...end dialogue at 20080107072535
...begin dialogue at 20080107072538
...end dialogue at 20080107072559
...begin dialogue at 20080107072603
...end dialogue at 20080107072649
...begin dialogue at 20080107072652
************************* SAPup started in PREPARE mode *************************
This is SAPup version 7.00/2 patch level 24.067.
Condition level 1, total => TRUE '#if ( "ORA" == "ORA" )' => TRUE
...begin dialogue at 20080107074628
...end dialogue at 20080107075039
...STARTED at 20080107075039.
Environment for SAPup:
SAPSID = SRD
SAPHOST = eux353
STARTPATH =
KERNPATH = /usr/sap/SRD/SYS/exe/run
PROFPATH = /usr/sap/SRD/SYS/profile
LOCAL SLOG =
LOCAL SLOG (OLD) =
CENTRAL SLOG =
CENTRAL SLOG (OLD) =
EPS INBOX = /in
EPS ROOT =
DBASID =
DBAHOST =
DBAPWD = <NOT REPORTED>
NR R3TRANS = 3
NR R3LOAD = 1
IMPORT DESTTIME = 86400
STARTR3 = ""
STARTPARAMS R3 = ""
STOPR3 = ""
STOPPARAMS R3 = ""
STARTDB = ""
STARTPARAMS DB = ""
STOPDB = ""
STOPPARAMS DB = ""
UPGRADE USER =
UPGRADE LANGUAGE = E
SLOGNAME = SLOG
ALOGNAME = ALOG
SYSNUM =
PROFNAME =
DDIC PWD = <NOT REPORTED>
GATEWAY HOST =
GATEWAY SERVICE =
MS SERVICE = 0
SLOW SHADOW IMPORT = Y
MAX BUFREFTIME = 120
BATCH HOST =
NR BTC-PROCS INTERN = 3
CUSTOMER GENERATION = 0
SAP START PROFILE =
DEFPROFNAME =
OSTYPE = HP-UX IA64
OSVERS = 11.23
DESTVERS = 700
COMPDESTVERS = PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_BASIS=700,SAP_BW=700,SRM_PLUS=550,SRM_SERVER=550,ST-PI=2005_1_700
SUBSTSTVERS = 700
COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_BW=700,SRM_SERVER=550
DESTPRODSHORTID = R/3
DESTPRODSHORTREL = 700
IMPORT LANGUAGES =
DB REPSWITCH PAR = NOT_SPECIFIED
PARALLEL DDLNTABS = 0
TABLSIZE = 0
KERNEL BIT SELECTION = 64 bit, no choice
SHD INSTANCE NUMBER =
SHD send d talk port = -1
SHD send d listen port = -1
SHD collect d listen port = -1
SHD collect d talk port = -1
SHD GW SERVICE =
SHD MS SERVICE =
SHD HOST =
SHD GW HOST =
SHD STARTPATH = /usr/sap/put/SRD/homeshd/SRD
SHD R3 START PROFILE =
SHD PROFILE PATH = /usr/sap/put/SRD/SYS/profile
SHD PROFILE NAME =
SHD startsap =
SHD stopsap =
SHD workpath =
SHD kernpath = /usr/sap/put/exe
dba schema =
dba shd schema =
connect env string =
REMOTE UPGRADE DIRECTORY =
SAP SERVICE ACCOUNT =
SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
Original shadow profile =
...begin dialogue at 20080107075039
...end dialogue at 20080107075333
...begin dialogue at 20080107075333
...end dialogue at 20080107075440
...begin dialogue at 20080107075440
...end dialogue at 20080107075815
...begin dialogue at 20080107075815
...end dialogue at 20080107075932
Execution of PREPARE module Parameter input begins at 20080107075932
UPGRADEPHASE
UPGRADEPHASE BEGIN_PRE
...started at 20080107075932
Condition level 1, total => FALSE '#if "ORACLE" == "SAPDB"' => FALSE
Condition level 1, total => FALSE '#elseif "ORACLE" == "DB2-z/OS"' => FALSE
Condition level 1, total => FALSE '#elseif "ORACLE" == "DB2/400"' => FALSE
Condition level 1, total => FALSE '#elseif "ORACLE" == "DB6"' => FALSE
Condition level 1, total => FALSE '#elseif "ORACLE" == "INFORMIX"' => FALSE
Condition level 1, total => FALSE '#elseif "ORACLE" == "MSSQL"' => FALSE
Condition level 1, total => TRUE '#elseif "ORACLE" == "ORACLE"' => TRUE
Condition level 1, total => FALSE '#if "HP-UX IA64" ~= "Linux"' => FALSE
Condition level 1, total => FALSE '#elseif "HP-UX IA64" ~= "Windows NT INTEL"' => FALSE
Condition level 1, total => FALSE '#elseif "HP-UX IA64" ~= "Windows NT IA64"' => FALSE
Condition level 1, total => FALSE '#elseif "HP-UX IA64" ~= "Windows NT X86_64"' => FALSE
Condition level 1, total => FALSE '#elseif "HP-UX IA64" ~= "AIX"' => FALSE
Condition level 1, total => TRUE '#elseif "HP-UX IA64" ~= "HP-UX"' => TRUE
..finished at 20080107075932 with status SUCCEEDED.
UPGRADEPHASE KEY_CHK
...started at 20080107075932
Phase log file: 'KEYCHK.LOG'
Correction package not found
...begin dialogue at 20080107075932
...end dialogue at 20080107080308
Correction package not found
...begin dialogue at 20080107080308
...end dialogue at 20080107080410
Correction package not found
...begin dialogue at 20080107080410
...end dialogue at 20080107081501
Correction package found
Correction package extracted
TOOLFIX VERSION: 24
TOOLFIX NAME: FIX_SRM50SR2
TOOLFIX DATE: 2007-11-27
...begin dialogue at 20080107081501
...end dialogue at 20080107081723
..finished at 20080107081723 with status SUCCEEDED.
UPGRADEPHASE EXTRACTKRN_PRE
...started at 20080107081723
Phase log file: 'EXTRKRN.LOG'
Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
Condition level 1, total => FALSE '#if ( "0" == "1" )' => FALSE
...begin dialogue at 20080107081723
...end dialogue at 20080107082152
Condition level 1, total => TRUE '#if "ORACLE" == "ORACLE" ' => TRUE
Condition level 1, total => TRUE '#if "ORACLE" == "ORACLE" ' => TRUE
..finished at 20080107082301 with status SUCCEEDED.
UPGRADEPHASE INITPUT_PRE
...started at 20080107082301
...begin dialogue at 20080107082302
...end dialogue at 20080107082615
...begin dialogue at 20080107082615
...end dialogue at 20080107082632
...begin dialogue at 20080107082632
...end dialogue at 20080107082657
...begin dialogue at 20080107082657
...end dialogue at 20080107082750
...begin dialogue at 20080107082750
...end dialogue at 20080107083036
...begin dialogue at 20080107083036
...end dialogue at 20080107083209
...begin dialogue at 20080107083209
...end dialogue at 20080107083235
...begin dialogue at 20080107083235
...end dialogue at 20080107083300
...begin dialogue at 20080107083300
...end dialogue at 20080107083322
Condition level 1, total => FALSE '#if -52 >= 0' => FALSE
Condition level 1, total => FALSE '#if -52 >= 0' => FALSE
Environment for SAPup:
SAPSID = SRD
SAPHOST = eux353
STARTPATH = /home/srdadm
KERNPATH = /usr/sap/SRD/SYS/exe/run
PROFPATH = /usr/sap/SRD/SYS/profile
LOCAL SLOG = /usr/sap/SRD/DVEBMGS40/log/SLOG40
LOCAL SLOG (OLD) = /usr/sap/SRD/DVEBMGS40/log/SLOGO40
CENTRAL SLOG = /usr/sap/SRD/SYS/global/SLOGJ
CENTRAL SLOG (OLD) = /usr/sap/SRD/SYS/global/SLOGJO
EPS INBOX = /usr/sap/SRDtrans/EPS/in
EPS ROOT = /usr/sap/SRDtrans/EPS
DBASID = SRD
DBAHOST = eux353
DBAPWD = <NOT REPORTED>
NR R3TRANS = 3
NR R3LOAD = 1
IMPORT DESTTIME = 86400
STARTR3 = "startsap_eux353_40"
STARTPARAMS R3 = "R3"
STOPR3 = "stopsap_eux353_40"
STOPPARAMS R3 = "R3"
STARTDB = "startsap_eux353_40"
STARTPARAMS DB = "DB"
STOPDB = "stopsap_eux353_40"
STOPPARAMS DB = "DB"
UPGRADE USER = srdadm
UPGRADE LANGUAGE = E
SLOGNAME = SLOG700
ALOGNAME = ALOG700
SYSNUM = 40
PROFNAME = /usr/sap/SRD/SYS/profile/SRD_DVEBMGS40_eux353
DDIC PWD = <NOT REPORTED>
GATEWAY HOST = eux353
GATEWAY SERVICE = sapgw40
MS SERVICE = 3640
SLOW SHADOW IMPORT = Y
MAX BUFREFTIME = 120
BATCH HOST = eux353
NR BTC-PROCS INTERN = 3
CUSTOMER GENERATION = 0
SAP START PROFILE = START_DVEBMGS40_eux353
DEFPROFNAME = /usr/sap/SRD/SYS/profile/DEFAULT.PFL
OSTYPE = HP-UX IA64
OSVERS = 11.23
DESTVERS = 700
COMPDESTVERS = PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_BASIS=700,SAP_BW=700,SRM_PLUS=550,SRM_SERVER=550,ST-PI=2005_1_700
SUBSTSTVERS = 700
COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_BW=700,SRM_SERVER=550
DESTPRODSHORTID = R/3
DESTPRODSHORTREL = 700
IMPORT LANGUAGES =
DB REPSWITCH PAR = NOT_SPECIFIED
PARALLEL DDLNTABS = 0
TABLSIZE = 0
KERNEL BIT SELECTION = 64 bit, no choice
SHD INSTANCE NUMBER =
SHD send d talk port = -1
SHD send d listen port = -1
SHD collect d listen port = -1
SHD collect d talk port = -1
SHD GW SERVICE =
SHD MS SERVICE =
SHD HOST =
SHD GW HOST =
SHD STARTPATH = /usr/sap/put/SRD/homeshd/SRD
SHD R3 START PROFILE =
SHD PROFILE PATH = /usr/sap/put/SRD/SYS/profile
SHD PROFILE NAME =
SHD startsap =
SHD stopsap =
SHD workpath =
SHD kernpath = /usr/sap/put/exe
dba schema = SAPR3
dba shd schema = SAPR3SHD
connect env string = dbs_ora_schema
REMOTE UPGRADE DIRECTORY =
SAP SERVICE ACCOUNT =
SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
Original shadow profile =
..finished at 20080107083322 with status SUCCEEDED.
UPGRADEPHASE DBCHK_PRE
...started at 20080107083322
Condition level 1, total => FALSE '#if -52 >= 0' => FALSE
Condition level 1, total => FALSE '#if -52 >= 0' => FALSE
DB Environment for SAPup:
DBATYPE ORACLE
DBAHOME /oracle/SRD/102_64
DBAEXE /oracle/SRD/102_64/bin
DBACONN "SRD"
DBAVERS 10.2.0.2.0
KERNVERS 620
SAPVERS 620
DOKVERS 620
DBASUBTYPE STANDARD
DBAOPSYS SAME_SYS
DBA2CONN ""
COMPRELS ""BBPCRM=400,PI_BASIS=2005_1_620,SAP_ABA=620,SAP_BASIS=620,ST-A/PI=01E_CRM400,ST-PI=2005_1_620""
Condition level 1, total => TRUE '#if 2 >= 0' => TRUE
DB Environment for SAPup:
DBATYPE ORACLE
DBAHOME /oracle/SRD/102_64
DBAEXE /oracle/SRD/102_64/bin
DBACONN "SRD"
DBAVERS 10.2.0.2.0
KERNVERS 620
SAPVERS 620
DOKVERS 620
DBASUBTYPE STANDARD
DBAOPSYS SAME_SYS
DBA2CONN ""
COMPRELS ""BBPCRM=400,PI_BASIS=2005_1_620,SAP_ABA=620,SAP_BASIS=620,ST-A/PI=01E_CRM400,ST-PI=2005_1_620""
...begin dialogue at 20080107083324
...end dialogue at 20080107083419
Environment for SAPup:
SAPSID = SRD
SAPHOST = eux353
STARTPATH = /usr/sap/SRD/SYS/exe/run
KERNPATH = /usr/sap/SRD/SYS/exe/run
PROFPATH = /usr/sap/SRD/SYS/profile
LOCAL SLOG = /usr/sap/SRD/DVEBMGS40/log/SLOG40
LOCAL SLOG (OLD) = /usr/sap/SRD/DVEBMGS40/log/SLOGO40
CENTRAL SLOG = /usr/sap/SRD/SYS/global/SLOGJ
CENTRAL SLOG (OLD) = /usr/sap/SRD/SYS/global/SLOGJO
EPS INBOX = /usr/sap/SRDtrans/EPS/in
EPS ROOT = /usr/sap/SRDtrans/EPS
DBASID = SRD
DBAHOST = eux353
DBAPWD = <NOT REPORTED>
NR R3TRANS = 3
NR R3LOAD = 1
IMPORT DESTTIME = 86400
STARTR3 = "startsap"
STARTPARAMS R3 = "R3"
STOPR3 = "stopsap"
STOPPARAMS R3 = "R3"
STARTDB = "startsap"
STARTPARAMS DB = "DB"
STOPDB = "stopsap"
STOPPARAMS DB = "DB"
UPGRADE USER = srdadm
UPGRADE LANGUAGE = E
SLOGNAME = SLOG700
ALOGNAME = ALOG700
SYSNUM = 40
PROFNAME = /usr/sap/SRD/SYS/profile/SRD_DVEBMGS40_eux353
DDIC PWD = <NOT REPORTED>
GATEWAY HOST = eux353
GATEWAY SERVICE = sapgw40
MS SERVICE = 3640
SLOW SHADOW IMPORT = Y
MAX BUFREFTIME = 120
BATCH HOST = eux353
NR BTC-PROCS INTERN = 3
CUSTOMER GENERATION = 0
SAP START PROFILE = START_DVEBMGS40_eux353
DEFPROFNAME = /usr/sap/SRD/SYS/profile/DEFAULT.PFL
OSTYPE = HP-UX IA64
OSVERS = 11.23
DESTVERS = 700
COMPDESTVERS = PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_BASIS=700,SAP_BW=700,SRM_PLUS=550,SRM_SERVER=550,ST-PI=2005_1_700
SUBSTSTVERS = 700
COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_BW=700,SRM_SERVER=550
DESTPRODSHORTID = R/3
DESTPRODSHORTREL = 700
IMPORT LANGUAGES =
DB REPSWITCH PAR = NOT_SPECIFIED
PARALLEL DDLNTABS = 0
TABLSIZE = 0
KERNEL BIT SELECTION = 64 bit, no choice
SHD INSTANCE NUMBER =
SHD send d talk port = -1
SHD send d listen port = -1
SHD collect d listen port = -1
SHD collect d talk port = -1
SHD GW SERVICE =
SHD MS SERVICE =
SHD HOST =
SHD GW HOST =
SHD STARTPATH = /usr/sap/put/SRD/homeshd/SRD
SHD R3 START PROFILE =
SHD PROFILE PATH = /usr/sap/put/SRD/SYS/profile
SHD PROFILE NAME =
SHD startsap =
SHD stopsap =
SHD workpath =
SHD kernpath = /usr/sap/put/exe
dba schema = SAPR3
dba shd schema = SAPR3SHD
connect env string = dbs_ora_schema
REMOTE UPGRADE DIRECTORY =
SAP SERVICE ACCOUNT =
SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
Original shadow profile =
NO UNICODE. DB factor is: 1
Phase log file: 'MCODCHK.LOG'
...begin dialogue at 20080107083419
...end dialogue at 20080107083430
Condition level 1, total => TRUE '#if 2 >= 0' => TRUE
..finished at 20080107083430 with status SUCCEEDED.
UPGRADEPHASE CONFCHK_IMP
...started at 20080107083430
Condition level 1, total => TRUE '#if 2 >= 0' => TRUE
Condition level 1, total => TRUE '#if 2 >= 0' => TRUE
DB Environment for SAPup:
DBATYPE ORACLE
DBAHOME /oracle/SRD/102_64
DBAEXE /oracle/SRD/102_64/bin
DBACONN "SRD"
DBAVERS 10.2.0.2.0
KERNVERS 620
SAPVERS 620
DOKVERS 620
DBASUBTYPE STANDARD
DBAOPSYS SAME_SYS
DBA2CONN ""
COMPRELS ""BBPCRM=400,PI_BASIS=2005_1_620,SAP_ABA=620,SAP_BASIS=620,ST-A/PI=01E_CRM400,ST-PI=2005_1_620""
System configuration:
Operating system = HP-UX IA64
Version = 11.23
Database type = ORACLE
Version = 10.2.0.2.0
..finished at 20080107083430 with status SUCCEEDED.
UPGRADEPHASE SOLMAN_CHK
...started at 20080107083430
...begin dialogue at 20080107083430
...end dialogue at 20080107083448
...begin dialogue at 20080107083448
...end dialogue at 20080107083641
..finished at 20080107083641 with status SUCCEEDED.
UPGRADEPHASE CHKSYSTYPE
...started at 20080107083641
Phase log file: 'CHKSYSTYPE.LOG'
System recognized: is not a final assembly system
..finished at 20080107083641 with status SUCCEEDED.
UPGRADEPHASE HIAV_CHK
...started at 20080107083641
Phase log file: 'HIAVCHK.LOG'
..finished at 20080107083641 with status SUCCEEDED.
UPGRADEPHASE J2EE_CHK1
...started at 20080107083641
Phase log file: 'J2EECHK.LOG'
...begin dialogue at 20080107083641
...end dialogue at 20080107083808
..finished at 20080107083808 with status SUCCEEDED.
UPGRADEPHASE REQ_J2EEUPG
...started at 20080107083808
Phase skipped due to condition 'J2EE_ONLY'
Skipping over to next phase, nothing to do for this system.
..finished at 20080107083808 with status SUCCEEDED.
UPGRADEPHASE SETSYNC_PREP_STARTED
...started at 20080107083808
Phase skipped due to condition 'J2EE_ONLY'
Skipping over to next phase, nothing to do for this system.
..finished at 20080107083808 with status SUCCEEDED.
UPGRADEPHASE REQ_READNOTE
...started at 20080107083808
Phase skipped due to condition 'CBU_only'
Skipping over to next phase, nothing to do for this system.
..finished at 20080107083808 with status SUCCEEDED.
UPGRADEPHASE INIT_CBU
...started at 20080107083808
Phase skipped due to condition 'CBU_only'
Skipping over to next phase, nothing to do for this system.
..finished at 20080107083808 with status SUCCEEDED.
UPGRADEPHASE CHECKGROUP_END0
...started at 20080107083808
Execution of PREPARE module Parameter input ends at 20080107083808
Execution of PREPARE module Initialization begins at 20080107083808
UPGRADEPHASE
UPGRADEPHASE INITCURENV
...started at 20080107083808
Environment for SAPup:
SAPSID = SRD
SAPHOST = eux353
STARTPATH = /usr/sap/SRD/SYS/exe/run
KERNPATH = /usr/sap/SRD/SYS/exe/run
PROFPATH = /usr/sap/SRD/SYS/profile
LOCAL SLOG = /usr/sap/SRD/DVEBMGS40/log/SLOG40
LOCAL SLOG (OLD) = /usr/sap/SRD/DVEBMGS40/log/SLOGO40
CENTRAL SLOG = /usr/sap/SRD/SYS/global/SLOGJ
CENTRAL SLOG (OLD) = /usr/sap/SRD/SYS/global/SLOGJO
EPS INBOX = /usr/sap/SRDtrans/EPS/in
EPS ROOT = /usr/sap/SRDtrans/EPS
DBASID = SRD
DBAHOST = eux353
DBAPWD = <NOT REPORTED>
NR R3TRANS = 3
NR R3LOAD = 1
IMPORT DESTTIME = 86400
STARTR3 = "startsap"
STARTPARAMS R3 = "R3"
STOPR3 = "stopsap"
STOPPARAMS R3 = "R3"
STARTDB = "startsap"
STARTPARAMS DB = "DB"
STOPDB = "stopsap"
STOPPARAMS DB = "DB"
UPGRADE USER = srdadm
UPGRADE LANGUAGE = E
SLOGNAME = SLOG700
ALOGNAME = ALOG700
SYSNUM = 40
PROFNAME = /usr/sap/SRD/SYS/profile/SRD_DVEBMGS40_eux353
DDIC PWD = <NOT REPORTED>
GATEWAY HOST = eux353
GATEWAY SERVICE = sapgw40
MS SERVICE = 3640
SLOW SHADOW IMPORT = Y
MAX BUFREFTIME = 120
BATCH HOST = eux353
NR BTC-PROCS INTERN = 3
CUSTOMER GENERATION = 0
SAP START PROFILE = START_DVEBMGS40_eux353
DEFPROFNAME = /usr/sap/SRD/SYS/profile/DEFAULT.PFL
OSTYPE = HP-UX IA64
OSVERS = 11.23
DESTVERS = 700
COMPDESTVERS = PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_BASIS=700,SAP_BW=700,SRM_PLUS=550,SRM_SERVER=550,ST-PI=2005_1_700
SUBSTSTVERS = 700
COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_BW=700,SRM_SERVER=550
DESTPRODSHORTID = R/3
DESTPRODSHORTREL = 700
IMPORT LANGUAGES =
DB REPSWITCH PAR = NOT_SPECIFIED
PARALLEL DDLNTABS = 0
TABLSIZE = 0
KERNEL BIT SELECTION = 64 bit, no choice
SHD INSTANCE NUMBER =
SHD send d talk port = -1
SHD send d listen port = -1
SHD collect d listen port = -1
SHD collect d talk port = -1
SHD GW SERVICE =
SHD MS SERVICE =
SHD HOST =
SHD GW HOST =
SHD STARTPATH = /usr/sap/put/SRD/homeshd/SRD
SHD R3 START PROFILE =
SHD PROFILE PATH = /usr/sap/put/SRD/SYS/profile
SHD PROFILE NAME =
SHD startsap =
SHD stopsap =
SHD workpath =
SHD kernpath = /usr/sap/put/exe
dba schema = SAPR3
dba shd schema = SAPR3SHD
connect env string = dbs_ora_schema
REMOTE UPGRADE DIRECTORY =
SAP SERVICE ACCOUNT =
SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
Original shadow profile =
..finished at 20080107083808 with status SUCCEEDED.
UPGRADEPHASE DBCHK_INI
...started at 20080107083808
Condition level 1, total => TRUE '#if 2 >= 0' => TRUE
Condition level 1, total => TRUE '#if 2 >= 0' => TRUE
DB Environment for SAPup:
DBATYPE ORACLE
DBAHOME /oracle/SRD/102_64
DBAEXE /oracle/SRD/102_64/bin
DBACONN "SRD"
DBAVERS 10.2.0.2.0
KERNVERS 620
SAPVERS 620
DOKVERS 620
DBASUBTYPE STANDARD
DBAOPSYS SAME_SYS
DBA2CONN ""
COMPRELS ""BBPCRM=400,PI_BASIS=2005_1_620,SAP_ABA=620,SAP_BASIS=620,ST-A/PI=01E_CRM400,ST-PI=2005_1_620""
Condition level 1, total => TRUE '#if 2 >= 0' => TRUE
DB Environment for SAPup:
DBATYPE ORACLE
DBAHOME /oracle/SRD/102_64
DBAEXE /oracle/SRD/102_64/bin
DBACONN "SRD"
DBAVERS 10.2.0.2.0
KERNVERS 620
SAPVERS 620
DOKVERS 620
DBASUBTYPE STANDARD
DBAOPSYS SAME_SYS
DBA2CONN ""
COMPRELS ""BBPCRM=400,PI_BASIS=2005_1_620,SAP_ABA=620,SAP_BASIS=620,ST-A/PI=01E_CRM400,ST-PI=2005_1_620""
Environment for SAPup:
SAPSID = SRD
SAPHOST = eux353
STARTPATH = /usr/sap/SRD/SYS/exe/run
KERNPATH = /usr/sap/SRD/SYS/exe/run
PROFPATH = /usr/sap/SRD/SYS/profile
LOCAL SLOG = /usr/sap/SRD/DVEBMGS40/log/SLOG40
LOCAL SLOG (OLD) = /usr/sap/SRD/DVEBMGS40/log/SLOGO40
CENTRAL SLOG = /usr/sap/SRD/SYS/global/SLOGJ
CENTRAL SLOG (OLD) = /usr/sap/SRD/SYS/global/SLOGJO
EPS INBOX = /usr/sap/SRDtrans/EPS/in
EPS ROOT = /usr/sap/SRDtrans/EPS
DBASID = SRD
DBAHOST = eux353
DBAPWD = <NOT REPORTED>
NR R3TRANS = 3
NR R3LOAD = 1
IMPORT DESTTIME = 86400
STARTR3 = "startsap"
STARTPARAMS R3 = "R3"
STOPR3 = "stopsap"
STOPPARAMS R3 = "R3"
STARTDB = "startsap"
STARTPARAMS DB = "DB"
STOPDB = "stopsap"
STOPPARAMS DB = "DB"
UPGRADE USER = srdadm
UPGRADE LANGUAGE = E
SLOGNAME = SLOG700
ALOGNAME = ALOG700
SYSNUM = 40
PROFNAME = /usr/sap/SRD/SYS/profile/SRD_DVEBMGS40_eux353
DDIC PWD = <NOT REPORTED>
GATEWAY HOST = eux353
GATEWAY SERVICE = sapgw40
MS SERVICE = 3640
SLOW SHADOW IMPORT = Y
MAX BUFREFTIME = 120
BATCH HOST = eux353
NR BTC-PROCS INTERN = 3
CUSTOMER GENERATION = 0
SAP START PROFILE = START_DVEBMGS40_eux353
DEFPROFNAME = /usr/sap/SRD/SYS/profile/DEFAULT.PFL
OSTYPE = HP-UX IA64
OSVERS = 11.23
DESTVERS = 700
COMPDESTVERS = PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_BASIS=700,SAP_BW=700,SRM_PLUS=550,SRM_SERVER=550,ST-PI=2005_1_700
SUBSTSTVERS = 700
COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_BW=700,SRM_SERVER=550
DESTPRODSHORTID = R/3
DESTPRODSHORTREL = 700
IMPORT LANGUAGES =
DB REPSWITCH PAR = NOT_SPECIFIED
PARALLEL DDLNTABS = 0
TABLSIZE = 0
KERNEL BIT SELECTION = 64 bit, no choice
SHD INSTANCE NUMBER =
SHD send d talk port = -1
SHD send d listen port = -1
SHD collect d listen port = -1
SHD collect d talk port = -1
SHD GW SERVICE =
SHD MS SERVICE =
SHD HOST =
SHD GW HOST =
SHD STARTPATH = /usr/sap/put/SRD/homeshd/SRD
SHD R3 START PROFILE =
SHD PROFILE PATH = /usr/sap/put/SRD/SYS/profile
SHD PROFILE NAME =
SHD startsap =
SHD stopsap =
SHD workpath =
SHD kernpath = /usr/sap/put/exe
dba schema = SAPR3
dba shd schema = SAPR3SHD
connect env string = dbs_ora_schema
REMOTE UPGRADE DIRECTORY =
SAP SERVICE ACCOUNT =
SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
Original shadow profile =
NO UNICODE. DB factor is: 1
Condition level 1, total => TRUE '#if 2 >= 0' => TRUE
..finished at 20080107083808 with status SUCCEEDED.
UPGRADEPHASE RFCCHK_INI
...started at 20080107083808
Phase log file: 'RFCCHK_INI.LOG'
..finished at 20080107083810 with status SUCCEEDED.
UPGRADEPHASE VERSCHK_INI
...started at 20080107083810
Phase list derived in VERSCHK:
INITCURENV
DBCHK_INI
RFCCHK_INI
VERSCHK_INI
VALCHK_INI
TOOLVERSION_INI
UNICODE_CHK_PRE
TOOLVERSION_UPG1
DBCONNCHK_INI
SETSYNC_INFO_FINISHED
UCMIG_DECISION
CLNT_CHK_INI
PATCH_CHK1
INTCHK_INI
ADJ_CNTRANS
INIT_CNTRANS
CNTRANS_PRE
DMPSPC_INI
JOB_RSDB4090
CHK_DB6_REG_PRE
CHK_DB6_PAR_INI
SPACECHK_INI
KRNCHK_DEST
DBPREP_CHK
EXECCV
EXECAV
COMPINFO_INI
ADDON_CHK
ADDON_INFO
ADDON_SPEC1
ADDON_TREAS
ADDON_WFM
ADDON_DMC
ACE_CHK
CRM_BILL
PR_DBPAR
CHECKGROUP_END1
..finished at 20080107083810 with status SUCCEEDED.
UPGRADEPHASE VALCHK_INI
...started at 20080107083810
Phase log file: 'VALCHK.LOG'
..finished at 20080107083810 with status SUCCEEDED.
UPGRADEPHASE TOOLVERSION_INI
...started at 20080107083810
Phase log file: 'TOOLVERS.LOG'
TOOL-VERSION 'disp+work': SYS_DISPWORK_REL = '640'
TOOL-VERSION 'disp+work': SYS_DISPWORK_VARIANT = '640_REL'
TOOL-VERSION 'disp+work': SYS_DISPWORK_64BIT = 'ON'
TOOL-VERSION 'disp+work': SYS_DISPWORK_DATE = 'Dec 3 2007 20:15:49'
TOOL-VERSION 'disp+work': SYS_DISPWORK_PATCHNUM = '211'
TOOL-VERSION 'tp': SYS_TP_VERSION = '340.16.38'
TOOL-VERSION 'tp': SYS_TP_REL = '640'
TOOL-VERSION 'tp': SYS_TP_PATCHNUM = '209'
TOOL-VERSION 'R3trans': SYS_R3TRANS_VERSION = '6.13'
TOOL-VERSION 'R3trans': SYS_R3TRANS_REL = '640'
TOOL-VERSION 'R3trans': SYS_R3TRANS_DATE = '10.07.07'
TOOL-VERSION 'R3trans': SYS_R3TRANS_PATCHNUM = '192'
TOOL-VERSION 'R3load': SYS_R3LOAD_REL = '6.40'
TOOL-VERSION 'R3load': SYS_R3LOAD_VERSION = '1.4'
Environment for SAPup:
SAPSID = SRD
SAPHOST = eux353
STARTPATH = /usr/sap/SRD/SYS/exe/run
KERNPATH = /usr/sap/SRD/SYS/exe/run
PROFPATH = /usr/sap/SRD/SYS/profile
LOCAL SLOG = /usr/sap/SRD/DVEBMGS40/log/SLOG40
LOCAL SLOG (OLD) = /usr/sap/SRD/DVEBMGS40/log/SLOGO40
CENTRAL SLOG = /usr/sap/SRD/SYS/global/SLOGJ
CENTRAL SLOG (OLD) = /usr/sap/SRD/SYS/global/SLOGJO
EPS INBOX = /usr/sap/SRDtrans/EPS/in
EPS ROOT = /usr/sap/SRDtrans/EPS
DBASID = SRD
DBAHOST = eux353
DBAPWD = <NOT REPORTED>
NR R3TRANS = 3
NR R3LOAD = 1
IMPORT DESTTIME = 86400
STARTR3 = "startsap"
STARTPARAMS R3 = "R3"
STOPR3 = "stopsap"
STOPPARAMS R3 = "R3"
STARTDB = "startsap"
STARTPARAMS DB = "DB"
STOPDB = "stopsap"
STOPPARAMS DB = "DB"
UPGRADE USER = srdadm
UPGRADE LANGUAGE = E
SLOGNAME = SLOG700
ALOGNAME = ALOG700
SYSNUM = 40
PROFNAME = /usr/sap/SRD/SYS/profile/SRD_DVEBMGS40_eux353
DDIC PWD = <NOT REPORTED>
GATEWAY HOST = eux353
GATEWAY SERVICE = sapgw40
MS SERVICE = 3640
SLOW SHADOW IMPORT = Y
MAX BUFREFTIME = 120
BATCH HOST = eux353
NR BTC-PROCS INTERN = 3
CUSTOMER GENERATION = 0
SAP START PROFILE = START_DVEBMGS40_eux353
DEFPROFNAME = /usr/sap/SRD/SYS/profile/DEFAULT.PFL
OSTYPE = HP-UX IA64
OSVERS = 11.23
DESTVERS = 700
COMPDESTVERS = PI_BASIS=2005_1_700,SAP_ABA=700,SAP_AP=700,SAP_BASIS=700,SAP_BW=700,SRM_PLUS=550,SRM_SERVER=550,ST-PI=2005_1_700
SUBSTSTVERS = 700
COMPSUBSTSTVERS = SAP_BASIS=700,SAP_ABA=700,SAP_BW=700,SRM_SERVER=550
DESTPRODSHORTID = R/3
DESTPRODSHORTREL = 700
IMPORT LANGUAGES =
DB REPSWITCH PAR = NOT_SPECIFIED
PARALLEL DDLNTABS = 0
TABLSIZE = 0
KERNEL BIT SELECTION = 64 bit, no choice
SHD INSTANCE NUMBER =
SHD send d talk port = -1
SHD send d listen port = -1
SHD collect d listen port = -1
SHD collect d talk port = -1
SHD GW SERVICE =
SHD MS SERVICE =
SHD HOST =
SHD GW HOST =
SHD STARTPATH = /usr/sap/put/SRD/homeshd/SRD
SHD R3 START PROFILE =
SHD PROFILE PATH = /usr/sap/put/SRD/SYS/profile
SHD PROFILE NAME =
SHD startsap =
SHD stopsap =
SHD workpath =
SHD kernpath = /usr/sap/put/exe
dba schema = SAPR3
dba shd schema = SAPR3SHD
connect env string = dbs_ora_schema
REMOTE UPGRADE DIRECTORY =
SAP SERVICE ACCOUNT =
SAP SERVICE ACCOUNT PWD= <NOT REPORTED>
Original shadow profile =
Condition level 1, total => FALSE '#if 2 < 0' => FALSE
Condition level 1, total => FALSE '#elseif 2 < 0' => FALSE
Condition level 2, total => FALSE '#if "ORACLE" == "SAPDB"' => FALSE
Condition level 1, total => FALSE 'Is the system still doing something? Check with "top" on operating system level (maybe archiver stuck?)
Also step to
/usr/sap/put/log
/usr/sap/put/tmp
and issue an "ls -lt | more" to check the latest logfiles.
Markus -
Server stuck in starting phase while starting webi server in BOXI 3.1 CMC
Hello All,
I am new to Business Objects and i am getting an issue in CMC,
many times i am getting an issue while starting or stopping webi servers.
Some times they may stuck in either stopping phase or starting phase.
Just want to know the reason and solution of the issue.
Thanks in advance..Hi,
To activate trace and restarting the server:
> Log on CMC
> Go to servers
> At the very end of the Command Line Parameters add a blank space then -trace.
> The server will show a red flag
> Restart it
Let me know if you need any information.
Regards,
Rameez Shaikh -
SPAM Update stuck in EPILOGUE phase
Hi,
We were trying to update the SPAM level from 40 to 45 of our R/3 4.6C system. After the SPAM update, we saw an information text saying " The current progam has been modified while running" and then just restarted transaction SPAM. The SPAM level has been updated to 45 but the status got stuck in the EPILOGUE phase with a red traffic light. We checked import/action/tp logs but did not find any errors. We can't find any OSS note as well describing this issue. Can anyone help us with this issue? We cannot proceed with our Support pack upgrade =(
Thanks and God Bless.Hi Rekka ,
you logoff and login again and run spam again .if still getting same error then lock all users and run the spam .This problem occures while run the spam same time some user working on same program.
please check and give thereward for this. -
Flex 2 Runtime: iviews stuck in 'initializing' phase
Hi everybody,
We just patched customer's EP7 VC in order to remove the nasty 32/64k bug with the new Flex 2 runtime.
However what happens now is:
we have several large models developed in SP12/Flex 1.5, they are being correctly deployed to EP SP14/Flex2, but fail to load.
They all hang indefinitely during the initialization phase of the iview, the progress bar stops at about 80%.
Smaller models work ok.
Please help, this issue is endangering my project.
Points will be awarded.
VTHi Govindu,
I'm also phasing the phasing same issue here,
It's giving the error like this, Can u suggest me y it's coming..,
and wat's that FLEX2 Complier.., As a developer can i do anything for this....,
Error Details...
Error in compiling Flex application: Error: A function in the code exceeds the 64K byte limit (actual size = '134236'). Since the problem occurs in the compiler-generated deferred instantiation code, please refactor/componentize portions of this document.
(/usr/sap/ED1/JC01/j2ee/cluster/server0/GUIMachine_Business_Packages/yfiin_gain_22077/FLEX_COMPILATION_FOLEDR/AAD2JT2.mxml:19)
Failed to compile AAD2JT2.mxml
It's Urgent requirement... Help me plz
Regards,
Saran -
Content Deployment Stuck in running phase
I have source site collection in content DB size is 25GB. I am going to run content deployment when its exported to 82180 then stuck and show status running I have observed this to stay 8 Hours but no Progress. What is solution ?
<security><requestFilteringallowDoubleEscaping="true">
<requestLimitsmaxAllowedContentLength="157286400"/>
</requestFiltering>
</security>
this entry already in web.config. Should I modify this or add another entry in web.config.
I have seen my exported file the maximum cab file size is 115MB so what upload limit should I set to get rid from this error. -
Stms import stuck main import phase
Hi expert,
I did export of production master data (sap_all profile) and moved TR to sandbox system. TR size 1GB.
Now I started TR import but it is still in main import phase showing in import monitor.
tp code -8888
main import
i checked BTC in sm51 which is showing 0 job.
Just checked in sm37 .. no job running.
i restart sap. (error prompt during gui login as "sap system message N" which is solve after restart sap)
Now after restart the sap I again check stms_import. TR showing truck icon and in import monitor it is showing same as main import phase running state.
How to check where import is going smoothly or it is stopped.
Kindly provide solution.Hi pranay,
I restarted system (os level) after changed parameter.
Below are the last lines of log (trans/temp)
4 ETW000 1 entry from FAGLFLEX07 (999) deleted.
4 ETW000 1 entry for FAGLFLEX07 inserted (999*).
4 ETW675 end import of "R3TRTABUFAGLFLEX07".
3 ETW674Xstart import of "R3TRTABUFAGLFLEX08" ...
4 ETW000 1 entry from FAGLFLEX08 (999) deleted.
4 ETW000 1 entry for FAGLFLEX08 inserted (999*).
4 ETW675 end import of "R3TRTABUFAGLFLEX08".
3 ETW674Xstart import of "R3TRTABUFAGLFLEXA" ...
As you mention may be there will high volume data but since after 8 hrs wait.. it is still in same table (R3TRTABUFAGLFLEXA) with no error.
TR size is 1.9 GB
Will you suggest me how much time it will take as per size of TR.
regards,
Devendra -
Urgent - Concurrent Stuck in Running phase
Gurus,
Version: 12.0.4.
To import the PO from 3rd party application, I used PDOI. For my testing, I just pushed 3 records into the tables and ran the concurrent Import Standard Purchase Orders. Strange to note that the concurrent is running for 3 days, still not completed, the phase shows Running and status as 'Normal'. No clue what went wrong.
Please help me out.
Thanks,
Sen
Edited by: Sen2008 on Nov 1, 2009 10:59 PM
Edited by: Sen2008 on Nov 2, 2009 4:31 AMHi,
To run AutoConfig, please do the following:
On the database tier: As oracle user, source the database env file and issue:
$ cd $RDBMS ORACLE_HOME/appsutil/scripts/<CONTEXT_NAME>
$ adautocfg.sh On the application tier: As applmgr user, source the application env file and issue:
$ cd $INST_TOP/admin/scripts
$ adautocfg.sh Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12
Regards,
Hussein -
SPAM/SAINT Update stuck on Import phase Epilogue
Under status it shows that SPAM/SAINT update is being processed and SPAM status shows red light.
Import phase is EPILOGUE.
I got out of the SPAM and restarted it, it shows the updated SPAM version but status is still red light.
I am updating to version 6.20/30 from 29
Any idea or suggestionHello Bill
Do you see any processes running in SM50?
Try to come out from SPAM and go again in SPAM and check.
regards,
Payal -
Music Downloads get stuck in processing phase and don't download?
I'm not sure what's going on with my computer.
Every time I try to download a song in the store, it seems to work fine. And then, when it gets to the processing part at the very end, it gets stuck there.
It never downloads to my computer and it freezes my iTunes, so I have to shut it down using the Task Manager.
Under my Check Available Downloads, it says that all my purchases have been downloaded, and in my Purchase History, it says I have bought those songs.
So why am I not getting them?
(I thought it might be something to do with my anti-virus software, but I'm not sure how to tell)iTunes temporarily downloads songs into a folder named Downloads. Then at the end, it does that processing stuff and tries to move it into the normal Artist folder. Apparently, it can't accomplish this.
I also use AVG (the free version) and don't have this problem. So it must be something else. If you look in Task Manager when it gets to the "processing" part, do you see any other program using a lot of CPU time?
There are previous posts from users where incorrect windows permissions have caused this, or other programs such as VCast from Verizon were causing a conflict. And sometimes it's just problems with apple servers.
Try this trick from Antzilla525 - maybe that will help.
http://discussions.apple.com/message.jspa?messageID=8686368#8686368
Maybe you are looking for
-
Problem with javascript confirm() in a JSP
I'm trying to use a confirm() box in a jsp. I've looked at tons of examples and I still have the same problem. If I just add this to my page the prompt will pop up as expected: (of course it doesn't really do anything.)<SCRIPT LANGUAGE="JavaScript">
-
SubTemplate call is failing with XML-22002 error
Hi, I am using Oracle BI Publisher 10.1.3.4 in WebLogic Server 10.3.6.0. Subtemplate reference is used in some reports. Whn we click on view of such report, below error is shown. "The report cannot be rendered because of an error, plea
-
Line item detials required in Receiving Cost Center
HI Experets Is it possible to get the line item wise detials in Received cost Center after distribut the Cost from Sending cost center to Receiving cost center through KSV5. becuase my client want the break up in received cost center for transfered
-
Problem in mail sending (ERRor message XS829)
*******************my issue is "have to send a mail to external mail id " but i am getting error as below......... Internal error: CL SMTP RESPONSE ESMTP error code is not known._554_554 Service una Message no. XS829 Diagnosis An error occurred in pr
-
Bug: Letterbox effect gives unwanted high brightness and low contrast
When I apply the Letterbox effect, it looks good in the preview, but the result is a barely visible clip, all whited-out, letterboxed but with extremely low contrast and high brightness (applied to the whole screen, including the black letterbox bars