Stuck in Tutorial 2 of David Powers tutorials "Build dynamic sites and web applications".

PLEASE NOTE - THIS IS ANEW SESSION! Apologies to those that have contributed already but I have been unable to reply unless by email on the original session!
========================================================================================== ==============================
I am very new to Dreamweaver and indeed to mySql. So, I am going through the the 3 David Powers Tutorials that are available for PHP & MySQL. I have successfully negotiated the 1st tutorial and am on the 2nd one and have got to a place where I am stalled!I am working on the file "manage_posts.php" and have got successfully "Building a simple recordset" - successfully built the Recordset via that dialog box which tests perfectly showing the contents of the news Table in MySQL. I can bind the recordset results in the page and save the file "manage_posts.php" but when I click Live View the live view fails and I get a 404 error - in other words manage_posts.php does not show the last entry of the news table! I have tried everything that I can think of including deleting manage_posts.php and starting over, but still no good!
Can anyone advise me on this please as to waht may be wrong and how perhaps to analyse what the error may be? I would appreciate any help as it is very frustrating not to be able to progress further.

Similar Messages

Building a best practice web application using ColdFusion and Jave EE

I've been tasked with rewriting a software using ColdFusion. I cannot seem to find a lot of information on best practice development in ColdFusion. I am an experience Java developer who has never used ColdFusion before. I want to build this application using a synergy of ColdFusion and Java EE technologies. Can someone recommend me a book that outlines how to developer in ColdFusion? Ideally this book assumes the reader is an experienced developer with no exposure to ColdFusion. Ideally the methods outlined in the book are still "best practice" methods.

jaisheela wrote:
Hello Friends,
I am also in the same situation.
I am a building a new web application using JSF and AJAX.
Requirement is I need to use IBM version of DOJO and JSF but I need to develop the whole application using Eclipse 3.3,2 and Tomcat 5.5.
With IBM version of DOJO and JSF, will Eclipse and Tomcat help to speed up the development or do you suggest me to go for Rational Application Developer and WebSphere Application Server.
If I need to go with RAD and WAS, then I am new to RAD and WAS, is it easy to use RAD and WAS for this kind of application and implement web applicaiton fast.
Any feedback will be great help.Those don't sound like requirements of the system to me. They sound more like someone wants to improve their CV/resume
From what I've read recently, if it's just fast you want, look at Ruby on Rails

Just updated to Firefox 3.6.9, I'm building a site and the Dreamweaver CS3 Preview feature no longer works in previewing my pages. Any fixes available?

Just updated to Firefox 3.6.9 this morning. I'm building a site using Dreamweaver CS3 for a class and the Preview feature was working fine before the update. I can preview my pages in other browsers successfully, but now if I choose Firefox, no window opens.
I have a Macbook Pro, OS X.

Sorry, Mozilla did a security fix that broke Dreamweaver with Firefox. Virtually no other programs were broken with that fix, and considering the age of Dreamweaver (~5 years since it was last updated) they decided not to back-out that security fix for one old, elderly program. This problem was discussed at length back in January and February after Firefox 3.6 was first released.

Scripted Build of Host and RT application and installer

Looking to make a script that allows me to create the host application from a project template. But I need it to change some of the values in the project such as file paths, files included in the installer and names of the build exe and rtexe. I cant find the way that I can programtally control that thing based on user input.
This is something I am doing so our developer team can be more consistant about how we compile updates and how they are distribuited to the customer.
Solved!
Go to Solution.

As for(imstuck) has said, all of what you want to do is possible, but it is spread out over two APIs - the VI server API (property and method nodes) and the application builder API, which is not on the palettes, but can be found in <vi.lib>\AppBuilder\AB_API.
For working with projects, you can get project references through the Application class, then move on to project items, etc. You can use the class browser (Ctl-Shift-B) to find things.
AppBuilder has several APIs, depending upon what your final target is (source code, executable, packed library, etc.). Use the appropriate one.
I would strongly recommend you do not directly touch the project file. It can contain binary information and has a lot of interdependencies. You may be successful, but your solution will probably be brittle, since the project format can and does change with the LabVIEW version.
If you have any more specific questions, let us know.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Flex Builder, debugger and web application: how?

Hello,
I'm traying to setup a project in eclipse with both a java
web application (servlets, jsp) and flex applications as a
frontend. So I installed flex builder as a plugin on an eclipse+web
standard tools, then created a WST web application project, and
used the "Add flex nature.." of the flex plugin. I don't want to
use the flex data services.
Now, in a standard run (I installed a tomcat 5.5 and
configured it in eclipse), my mxlm files are being correctly
compiled into swf, and they are successfully calling my servlets
(which simulates a backend xml-based interface).
I'm having problems in debug: if I launch the debug profile
related to tomcat, the normal version of the sfw will be used (even
manually switching to the "-debug" version, it says that a running
flex debugger has not be found on localhost). On the other way, if
I launch the debug as a "flex application", it seems to work (it
stops at breakpoints) but my tomcat is not started at all, the swf
is accessed as a local file and all call to my servlet will fail..
so it will stop working almost immediately.
There is a way to setup eclipse to start standard java
debugging with tomcat *and* the flex debugger?
Thanks
Cosma

I found a workaround of sorts for the problem: don't
terminate the applications!
Previously, I would terminate the application using either
the Terminate button in the Debug view or by closing the tab in the
browser (Firefox). Now I just let them pile up in the browser and I
rarely see this problem.
In other words, I was having lots of trouble when doing
Launch-Terminate-Launch-Terminate... but now I just
Launch-Launch-Launch... and clean up once in a while.

Build dynamic query depending upon selection of table and columns

Hi ,
I want your views on following requirement :
we r doing generic export to excel functionality .
1.User will select multiple tables and according to tables ,columns on that table will select
2.There can be multiple table
3.depending upon column and table selection , we have to build dynamic query and execute .
Please let me know is it possible .If yes then please tell me how to do above requirement.
Thanks in advance

Hi,
Identifiers cannot be used as bind variables, query are parsed
before evaluate bind variables. Identifiers like table name.
For excel you can use some like this:
SET MARKUP HTML ON ENTMAP ON SPOOL ON PREFORMAT OFF
SPOOL test_xls.xls
SELECT colum1||chr(9)||columN FROM tableName;
or CSV:
SELECT colum1|| ',' ||columN FROM tableName;
SPOOL OFF
SET MARKUP HTML OFF ENTMAP OFF SPOOL OFF PREFORMAT ON
For construct the query i suggest to read "Dynamic SQL Statements":
http://www.java2s.com/Tutorial/Oracle/0440__PL-SQL-Statements/0300__Dynamic-SQL.htm
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/dynamic.htm
http://docs.oracle.com/cd/B10500_01/appdev.920/a96590/adg09dyn.htm
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:227413938857
--sgc

Can't find Part 4 of CC version of David Powers tutorial - help?

Was happily working away in the David Powers tutorial for Dreamweaver CC. Got through Parts 1 through 3, and started 4. Bookmarked part 4 on my browser. Came back to it this morning, and now that same URL is showing me the CS6 version of the training, which is completely different content. I can not find the URL for Part 4 of the CC version of this training any more... Help?
(Note the header indicates Dreamweaver CC, but the body of instruction indicates CS6, and the fictional project being built is "Check Magazine" instead of the "Bayside Beat" project of the CC training...)
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt4.html

Hi,
Thanks for the heads up!
I'm noticing the link is incorrect for part 4. I'll check with our documentation team to sort this out.
Once I get more details I'll update you once corrected.
Kind regrards,
-Sidney

Problem with tutorial; "Build a Web Application with JDeveloper 11g Using "

I've got a rather new installation of Vista Business x64 on my developer rig, and last week I installed the new JDeveloper 11g version. The installation was all-inclusive, no customization on my end.
In addition I've got a test installation of an Oracle DB 11gR1 on an available server here.
To familiarize myself with the new JDeveloper I decided to spend some time with the JDeveloper 11g tutorials found here: http://www.oracle.com/technology/obe/obe11jdev/11/index.html.
I've started twice on the second tutorial, "Build a Web Application with JDeveloper 11g Using EJB, JPA, and JavaServer Faces", and find myself repeatedly stuck at step 19 in section "Creating the Data Model and Testing it".
It seems impossible to deploy the application to the default application server. The server starts fine on its own, I can access it via the admin console on port 7001 and it looks good. However, when I try to run the HRFacadeBean funny things are happening, symptomized by the following error messages seen in the IDE log-area:
The "Messages" pane displays:
"Compiling...
Context: MakeProjectAndDependenciesCommand application=HR_EJB_JPA_App.jws project=EJBModel.jpr
C:\Oracle\Middleware\jdk160_05\jre\bin\java.exe -jar C:\Oracle\Middleware\jdeveloper\jdev\lib\ojc.jar -g -warn -nowarn:320 -nowarn:372 -nowarn:412 -nowarn:413 -nowarn:415 -nowarn:486 -nowarn:487 -nowarn:489 -nowarn:556 -nowarn:558 -nowarn:560 -nowarn:561 -nowarn:705 -Xlint:-fallthrough -Xlint:-serial -Xlint:-unchecked -source 1.6 -target 1.6 -noquiet -encoding Cp1252 -d C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\classes -namereferences -make C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\classes\EJBModel.cdi -classpath C:\Oracle\Middleware\jdk160_05\jre\lib\resources.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\rt.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\jsse.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\jce.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\charsets.jar;C:\JDeveloper\mywork\HR_EJB_JPA_App\.adf;C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\classes;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\toplink.jar;C:\Oracle\Middleware\modules\com.bea.core.antlr.runtime_2.7.7.jar;C:\Oracle\Middleware\modules\javax.persistence_1.0.0.0_1-0.jar;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\eclipselink.jar;C:\Oracle\Middleware\jdeveloper\modules\oracle.xdk_11.1.1\xmlparserv2.jar;C:\Oracle\Middleware\jdeveloper\modules\oracle.xdk_11.1.1\xml.jar;C:\Oracle\Middleware\modules\javax.jsf_1.2.0.0.jar;C:\Oracle\Middleware\modules\javax.ejb_3.0.1.jar;C:\Oracle\Middleware\modules\javax.enterprise.deploy_1.2.jar;C:\Oracle\Middleware\modules\javax.interceptor_1.0.jar;C:\Oracle\Middleware\modules\javax.jms_1.1.1.jar;C:\Oracle\Middleware\modules\javax.jsp_1.1.0.0_2-1.jar;C:\Oracle\Middleware\modules\javax.jws_2.0.jar;C:\Oracle\Middleware\modules\javax.activation_1.1.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.mail_1.1.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.xml.soap_1.3.1.0.jar;C:\Oracle\Middleware\modules\javax.xml.rpc_1.2.1.jar;C:\Oracle\Middleware\modules\javax.xml.ws_2.1.1.jar;C:\Oracle\Middleware\modules\javax.management.j2ee_1.0.jar;C:\Oracle\Middleware\modules\javax.resource_1.5.1.jar;C:\Oracle\Middleware\modules\javax.servlet_1.0.0.0_2-5.jar;C:\Oracle\Middleware\modules\javax.transaction_1.0.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.xml.stream_1.1.1.0.jar;C:\Oracle\Middleware\modules\javax.security.jacc_1.0.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.xml.registry_1.0.0.0_1-0.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar;C:\Oracle\Middleware\wlserver_10.3\common\lib -sourcepath C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src;C:\Oracle\Middleware\jdk160_05\src.zip;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\toplink-src.zip;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\eclipselink-src.zip C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\Dept.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\Emp.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacadeLocal.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacadeClient.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacade.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacadeBean.java
[11:45:27 PM] Successful compilation: 0 errors, 0 warnings.
[Application HR_EJB_JPA_App is bound to Server Instance DefaultServer]
[Starting Server Instance DefaultServer]
#### Server Instance DefaultServer could not be started: Server Instance was terminated.
The "Running: DefaultServer" displays:
"C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
[Server Instance DefaultServer is shutting down. All applications currently running will be terminated and undeployed.]
Process exited.
C:\Oracle\Middleware\user_projects\domains\base_domain\bin\stopWebLogic.cmd
Stopping Weblogic Server...
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://localhost:7101 with userid weblogic ...
This Exception occurred at Wed Oct 29 23:47:40 CET 2008.
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7101: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused: connect; No available router to destination]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
     at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:365)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:512)
     at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:565)
     at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:305)
     at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
     at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:60)
     at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:125)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
     at org.python.core.PyMethod.__call__(PyMethod.java:96)
     at org.python.core.PyObject.__call__(PyObject.java:248)
     at org.python.core.PyObject.invoke(PyObject.java:2016)
     at org.python.pycode._pyx4.connect$1(<iostream>:16)
     at org.python.pycode._pyx4.call_function(<iostream>)
     at org.python.core.PyTableCode.call(PyTableCode.java:208)
     at org.python.core.PyTableCode.call(PyTableCode.java:404)
     at org.python.core.PyFunction.__call__(PyFunction.java:184)
     at org.python.pycode._pyx16.f$0(C:\Oracle\Middleware\user_projects\domains\base_domain\shutdown.py:1)
     at org.python.pycode._pyx16.call_function(C:\Oracle\Middleware\user_projects\domains\base_domain\shutdown.py)
     at org.python.core.PyTableCode.call(PyTableCode.java:208)
     at org.python.core.PyCode.call(PyCode.java:14)
     at org.python.core.Py.runCode(Py.java:1135)
     at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
     at weblogic.management.scripting.WLST.main(WLST.java:129)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.WLST.main(WLST.java:29)
Caused by: java.net.ConnectException: t3://localhost:7101: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused: connect; No available router to destination
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:203)
     at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
     at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:344)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:339)
     ... 38 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused: connect; No available router to destination
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:315)
     at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:251)
     at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:194)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:225)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteCluster(RJVMFinder.java:303)
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:193)
     ... 43 more
Problem invoking WLST - Traceback (innermost last):
File "C:\Oracle\Middleware\user_projects\domains\base_domain\shutdown.py", line 1, in ?
File "<iostream>", line 22, in connect
WLSTException: Error occured while performing connect : Error getting the initial context. There is no server running at t3://localhost:7101 Use dumpStack() to view the full stacktrace
Done
I'm not that familiar with these things but it seems to me that there is an issue with port numbers here. The application seems to expect a app.server service at port 7101, but does'nt find one.
Any suggestions on how to fix this problem would be appreciated?
LA$$E

Jupp,
It fails in a similar way.
What I did was; create a simle 'Hello World' html file, saving it with the jsp extension. In Jdev11g i made a new application and an emtpy project, then loaded the jsp file and made it the default run-target. This compiles nicely.
When running the project it first attempts to start the WebLogicServer (WLS). After a few minutes it is started as seen in the "Running: DefaultServer" pane:
C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\Middleware\jdeveloper\modules\features\adf.share_11.1.1.jar;;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oracle_client\product\11.1.0\client_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -DproxySet=false -Djbo.34010=false -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Doracle.home=C:\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Xms1024m -Xmx1024m -XX:MaxPermSize=256m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<30.okt.2008 kl 19.20 CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<30.okt.2008 kl 19.20 CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30.okt.2008 kl 19.20 CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<30.okt.2008 kl 19.20 CET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<30.okt.2008 kl 19.20 CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<30.okt.2008 kl 19.20 CET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<30.okt.2008 kl 19.20 CET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30.okt.2008 kl 19.20 CET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30.okt.2008 kl 19.20 CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<30.okt.2008 kl 19.20 CET> <Warning> <Server> <BEA-002611> <Hostname "Kromp.lan", maps to multiple IP addresses: 10.0.0.8, 127.0.0.1>
<30.okt.2008 kl 19.20 CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.0.0.8:7001 for protocols iiop, t3, ldap, snmp, http.>
<30.okt.2008 kl 19.20 CET> <Warning> <Server> <BEA-002611> <Hostname "127.0.0.1", maps to multiple IP addresses: 10.0.0.8, 127.0.0.1>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Development Mode>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 121552 ms.
DefaultServer started.
In the "Messages" pane, however, things are not looking so good:
Context: MakeProjectAndDependenciesCommand application=TestAppJsp.jws project=TestProjJsp.jpr
[7:20:49 PM] Successful compilation: 0 errors, 0 warnings.
[Application TestAppJsp is bound to Server Instance DefaultServer]
[Starting Server Instance DefaultServer]
#### Server Instance DefaultServer could not be started: Server Instance was terminated.
But, of course, the server is actually running as I can access it via its Admin Console.
So, I try to run the project again, and this time the following is shown in the "Messages" pane:
Compiling...
Context: MakeProjectAndDependenciesCommand application=TestAppJsp.jws project=TestProjJsp.jpr
[7:26:39 PM] Successful compilation: 0 errors, 0 warnings.
[Application TestAppJsp is bound to Server Instance DefaultServer]
[Starting Server Instance DefaultServer]
#### Server Instance DefaultServer could not be started: Server Instance was terminated.
The "Running: DefaultServer" now comes up with:
C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
[Server Instance DefaultServer is shutting down. All applications currently running will be terminated and undeployed.]
Process exited.
The WLS is still running though as I can still access its adm console.
To me it seems that it is attempting to start a separate instance of the WLS for each run attempt, but then I could be wrong.....:(
Later I'll try to change the default WLS port from 7001 to 7101 as suggested in another port here.
I must admit that I'm a bit surprised that the JDev11g doesn't work fine at this very simple level when performing a default install.

Is this a CONCAT problem re: David Powers, or a Magic Quotes problem...

I've tried to figure this out with the posts (and some info
on David's site, etc), and I just can't seem to figure out the real
problem.
I'm working on a tutorial and I can't figure out if the error
message is correct and it's improper coding inserted by DW (and if
so, I can't figure out what to correct) or
If this is a problem with DW8.0.2 along the lines of what the
hotfix that seems to be so hard to get will fix, or
If this is along the lines of an example of why magic quotes
should be turned off, and if so, where/how do I turn them off, and
will that correct the code, and if not, how would it be properly
corrected?
Here is the error message:
Parse Error: parse error, unexpected '=', expecting ',' or
')' in <thefile> on line 34.
Here is the code it is referencing:
32 $Search_rsSearch = "abc";
33 if (isset(#txtSearch#)) {
34 $Search_rsSearch = (get_magic_quotes_gpc()) ? #txtSearch#
: addslashes(#txtSearch#);
35 }
36 mysql_select_db($database_dorknozzle, $dorknozzle);
37 $query_rsSearch = sprintf("SELECT * FROM EmployeeStore
WHERE ItemName LIKE CONCAT('%%', %s,
'%%')", GetSQLValueString($Search_rsSearch, "text"));
38 $rsSearch = mysql_query($query_rsSearch, $dorknozzle) or
die(mysql_error());
39 $row_rsSearch = mysql_fetch_assoc($rsSearch);
40 $totalRows_rsSearch = mysql_num_rows($rsSearch);
I'm using php4.4.4, mysql5.0.24, apache2.2.3
Thank You,
Jeff G.

xViPERed wrote:
> If this is a problem with DW8.0.2 along the lines of
what the hotfix that
> seems to be so hard to get will fix,
That will fix part of your problem, but the error is caused
by something
else:
> Here is the error message:
>
Parse Error: parse error, unexpected '=', expecting ',' or
')' in
> <thefile> on line 34.
>
> Here is the code it is referencing:
> 32 $Search_rsSearch = "abc";
> 33 if (isset(#txtSearch#)) {
> 34 $Search_rsSearch = (get_magic_quotes_gpc()) ?
#txtSearch# :
> addslashes(#txtSearch#);
> 35 }
# is one of the PHP characters used to comment out part of a
script. I
suspect that you have got this from the Dreamweaver help
files, which
are particularly unhelpful on this point. The show the
runtime value
expression as #formFieldName#, which is ColdFusion style, not
PHP. You
need to replace #txtSearch# with something like
$_GET['search'] or
$_POST['search'].
What makes things worse is that the code inserted by 8.0.2
without the
hotfix is also incorrect. Line 34 should be something like
this:
$Search_rsSearch = $_GET['search'];
Line 37 is also wrong.
> 37 $query_rsSearch = sprintf("SELECT * FROM
EmployeeStore WHERE ItemName LIKE
> CONCAT('%%', %s,
> '%%')", GetSQLValueString($Search_rsSearch, "text"));
It should be this:
$query_rsSearch = sprintf("SELECT * FROM EmployeeStore WHERE
ItemName
LIKE %s", GetSQLValueString("%" . $Search_rsSearch . "%",
"text"));
David Powers
Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
http://foundationphp.com/

"Adobe Dreamweaver PHP Training from David Powers

“Adobe® Dreamweaver® CS5 with PHP Training from the Source David Powers
Lesson 7 Validating Input on the Server
I have reached page 445, and become completely stuck - I've been about three weeks trying to sort the problem but cant get anywhere. Not sure what to do from here so any advice would be really appreciated. The problem:
I have completed the script exactly as instructed, when I go live (local sever), I get a blank screen, OK, does not display. I am sure this is something simple but I have done all the fault finding and am out foxed. I know the local server works OK - I completed chapter 6 successfully - I can also run a php test page from the local folder that the file is stored in. i.e provictis/phpcs5. I have saved my ZendFraework in a separate location as advised. i.e. User/SPENNY/...
This is the basic code:
<?php
$library='/Users/SPENNY/ZendFramework/library';
set_include_path(get_include_path() . PATH_SEPARATOR .
$library);
require_once('Zend/Loader/Autoloader.php');
$loader=Zend_Loader_Autoloader::getInstance();
if ($loader) {
          echo 'ok';
} else {
          echo 'Huston we have a blinkin problem, but do not panic we will get things sorted';
Gareth

FIXED!!
1)
i finally did get the message problem was with:
$mailhost='ssl://mail.domain.com';
ssl:// was just nonsense and been removed
2)
'auth' => 'true' was changed to 'auth' => 'login'
3)
for bluehost i got information that it was tls secure connection protocol not ssl
'ssl' => 'tls'
4)
port used '25' not 465.
Didnt still tried 26 and 465 maybe they would work too.

Using PHP to identify the current page - by David Powers

Hi There,
I'm trying to write a script so I can identify the sub-pages under "Gallery" in my website
Under Gallery I have more than hundred pages describing the photos but I want to identify them as the "Gallery" page.
How do I achieve that?
It would be tedious to write the "PHP if" statement for each photo link.
I trust there is a simpler solution.
In PHP solutions by David Powers, Ch.4 "Using PHP to identify the current page"
The script is:
<?php $currentPage = basename($_SERVER['SCRIPT_NAME']); ?>
<ul id="nav">
<li><a href="index.php" <?php if ($currentPage == 'index02.php') {echo 'id="here"';} ?>>Home</a></li>
<li><a href="journal.php" <?php if ($currentPage == 'journal.php') {echo 'id="here"';} ?>>Journal</a></li>
<li><a href="gallery.php" <?php if ($currentPage == 'gallery.php') {echo 'id="here"';} ?>>Gallery</a></li>
<li><a href="contact.php" <?php if ($currentPage == 'contact.php') {echo 'id="here"';} ?>>Contact</a></li>
</ul>
Let's say that the gallery pages contains hundreds of links gallery like gallery/photos1.php, gallery/photos2.php, gallery/photos3.php, gallery/photos4.php, gallery/photos5.php, gallery/photos6.php, gallery/photos7.php etc...
How would I identify the sub-pages so when we are there Gallery is highlighted?
Thank you!
Best,

Hello Siddhardha,
To get the details of a process you need to use Locator class from BPEL api. You can locate your process by listInstances method which accepts WhereCondition parameter used to build a query on process instances. Once you've found the process you were looking for you can use getAuditTrail method to retrieve audit trail of a given instance. You can also use setStatus() method from a BPELX java exec tag within your process and later retrieve it from instance handle by getStatus method.
A sample snippet to retrieve instance handles to all child processes of a given process:
StringBuffer sb = new StringBuffer();
Locator locator = new Locator(domain,domainpassword);
WhereCondition wc = new WhereCondition();
String query = sb.append(SQLDefs.AL_ci_root_id).append(" = ? ").toString();
wc.append(query);
wc.setLong(1,parentInstance);
IInstanceHandle[] ih = locator.listInstances(wc);
You can read more about querying processes on http://blogs.oracle.com/matt/2006/06/27?print-friendly=true
Radoslaw

For David Powers ?

David,
Hope you having a good break from here - as you've not been
around for
a few days.
When you are back - I need a little help please
~Malcolm N....
~

> Come to think about it - Murray seemed to make the move
to using php
> only a few months ago - and given his enthusiasm for
SSI's maybe this
> tells something about the next release - or maybe I'm
reading too much
> between the lines (:-))
You're looking for deep inner meaning in a shallow bowl, I'm
afraid! 8)
Templates are part of DW and will be for a long time. And
personally, I
have no problem with includes in DW templates.....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Malcolm N_" <[email protected]> wrote in message
news:[email protected]...
> On Sat, 27 Jan 2007 19:38:04 +0000, David Powers
<[email protected]>
> wrote:
>>
>>I'll wait for the summary. The basic thing to
remember about include()
>>is that it expects a relative path, an absolute path,
or for the file to
>>be in the PHP include path.
>
> Thanks David - at the moment things are under control,
but I haven't
> altered much of the site with DW.
>
>> Things get complicated if you use includes
>>with Dreamweaver templates.
>
> Yes - well DW has been good at controlling some tricky
things to date,
> I hope that the next release makes using includes within
simple
> Template's a little easier.
>
> After all the Adobe Community Experts have been pushing
the use of
> SSI's very strongly in the last couple of years, telling
us to abandon
> tables, and complex templates (:-))
>
> Come to think about it - Murray seemed to make the move
to using php
> only a few months ago - and given his enthusiasm for
SSI's maybe this
> tells something about the next release - or maybe I'm
reading too much
> between the lines (:-))
>
> --
>
> ~Malcolm N....
> ~

FTAO - David Powers

David (php guru that you are
, this is directed to you as I have no
concept of this wee problem I have.
I signed up with a new unix host, so that I could set up a
link directory
script for testing purposes. According to the help doc, once
I typed in the
path to the install script, this "you bewt" script was
supposed to install
itself and away I'd go. I had the following from the host
after I asked why
I was getting an 'internal error' trying to run the scrip:
"the reason you are getting the internal server error is
because we do not
allow mod rewrites in the htaccess file. If you need to use
these we can
add them to your hosting container on the server. Please let
us know."
What does this mean exactly and would adding them for my use
cause problems
for my site or any other user on the server?
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.macromedia.com/devnet/dreamweaver/css.html
- CSS Tutorials

Thanks David,
I asked the new host (who were suprisingly quick to respond
to my initial
support ticket - considering the time differences) to add the
mod, which
they did within minutes of my request. Now however, I'm
getting a
"forbidden' error.
So off to email them again ;-)
PS: I even get a standard install of Wordpress with the host,
so will
definitely have to get to your book one day soon !
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.macromedia.com/devnet/dreamweaver/css.html
- CSS Tutorials
"David Powers" <[email protected]> wrote in message
news:[email protected]...
> .: Nadia :. *ACE* wrote:
>> David (php guru that you are
, this is directed to you as I have no
>> concept of this wee problem I have.
>
> That's very nice of you, Nadia, but mod_rewrite has
nothing to do with
> PHP; it's an Apache module.
>
>> "the reason you are getting the internal server
error is because we do
>> not allow mod rewrites in the htaccess file. If you
need to use these we
>> can add them to your hosting container on the
server. Please let us
>> know."
>>
>> What does this mean exactly and would adding them
for my use cause
>> problems for my site or any other user on the
server?
>
> It means you can't add a mod_rewrite command through
.htaccess, but the
> server administrator is willing to do it for you. If
it's set up
> correctly, it should have no impact on your current site
or anyone else's.
>
> Disclaimer: my knowledge of Apache is basically limited
to simple things,
> such as installing PHP, creating virtual hosts, and a
little maintenance.
> I leave things like mod_rewrite to the experts.
WordPress uses mod_rewrite
> to provide nice looking links to blog entries. I use it
on my site, but
> all the mod_rewrite stuff is handled by WordPress. I
haven't touched it
> myself.
>
> --
> David Powers
> Author, "Foundation PHP for Dreamweaver 8" (friends of
ED)
> Author, "Foundation PHP 5 for Flash" (friends of ED)
>
http://foundationphp.com/

Same old same old: calling David Powers

It has been interesting to watch and read the comments recently about the DW tangle with database-driven sites.
I am using DW CS6 (12.03) Mac with Mountain Lion, and have MAMP installed and runnning.
I have religiously finished David Powers tute at here.
Question:
Why am I getting the "Dynamically related files could not be resolved because of an internal error" when I render the page with the Live button?
The page displays blank . . . LOL
Can anyone point me to the possible cause?
I wonder why Adobe has left this up for 3 years when (after all updates) the message still appears and development stops.
Are the tutorial files faulty, or have I missed soemthing?
David: can you shed light on this please?

Nancy and David
Thanks for reply and here are your suggestions:
Below that 3 screen shots (2 from DW and 1 from phpMyAdmin FYI.
I have rebuilt this several times (incl DW Site, database and DW Connection) but I am still running into the same error msg as originally when "Live" is attempted in DW.
Code from Comment.php
start---------------------------------------------------------
<?php require_once('Connections/connTest.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
mysql_select_db($database_connTest, $connTest);
$query_getComments = "SELECT first_name, last_name, `comment` FROM comments ORDER BY comment_id DESC";
$getComments = mysql_query($query_getComments, $connTest) or die(mysql_error());
$row_getComments = mysql_fetch_assoc($getComments);
$totalRows_getComments = mysql_num_rows($getComments);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Cafe Townsend - Customer Comments</title>
<link href="assets/styles.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="wrapper">
<div id="header"><img src="assets/header.jpg" width="700" height="92" alt="Cafe Townsend" /></div>
<h1 id="main_header">Cafe Townsend Intranet</h1>
<div id="main">
    <h2>Customer comments</h2>
    <div id="comments">
      <?php do { ?>
        <p><?php echo $row_getComments['comment']; ?> — <?php echo $row_getComments['first_name']; ?> <?php echo $row_getComments['last_name']; ?></p>
        <?php } while ($row_getComments = mysql_fetch_assoc($getComments)); ?>
    </div>
</div>
<div id="footer"></div>
</div>
</body>
</html>
<?php
mysql_free_result($getComments);
?>
end -------------------------------------------
Looking forward to your thoughts on this. Tony
Thanks again!

For David Powers please

Hi,
I have used your method for a news blog from PHP for
Dreamweaver 8.
When no image is selected, firefox does not display the image
container with the red X.
However, most of our users are still using IE6.
In IE6 when no image is used it shows an image holder with
the red x in it.
Is there a way to remove the image place holder if no image
is displayed?
Also when no caption is used, in all browsers you get a
"Caption here" in place of the caption.
cheers

Macnimation wrote:
> As a by the way, I also have the Essential Guide to
Dreamweaver with CC, AJAX
> and PHP and bwtween them I get most help.
Thanks. That's nice to know.
> Do you know of or are you planning a future book to
build applications other
> than Blogs and Photo Galleries, because it seems that
nearly all books on Web
> developement whether it is PHP, ASP or Coldfusion seem
to concentrate on these
> applications only.
I suspect that's because they involve basic database
techniques.
Beginner-level books sell more than advanced ones, mainly
because anyone
who moves beyond the beginner level is usually fairly capable
of
tackling more complex projects without the assistance of a
book.
Anyway, the ideas you have suggested will certainly give me
something to
think about for future books. I'm currently putting the final
touches to
a CS4 book, but it doesn't cover the sort of area you're
looking for.
> I discussed this last year at Adobe MAX in Barcelona and
alot of people agreed
> that some more diverse applications would be useful.
I'll be in Milan in
> December also......
I'm hoping to go too, but haven't made a firm decision yet.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Stuck in Tutorial 2 of David Powers tutorials "Build dynamic sites and web applications".

Similar Messages

Maybe you are looking for