Student flash interior movie help!!
In older versions of Flash, shapes were very volatile. If two
shapes on the same layer overlapped each other, they would actually
cut chunks out of each other. Flash 8, on the other hand, now has
object drawing mode, which allows you to create a shape as a
self-contained object that won't interfere with other objects.
mitchFlash;
Not sure what the question is, but fwiw you can turn off
object drawing
mode via the tools panel. The feature "auto-groups" graphics,
but much of
the time I prefer flash's efficient "auto-join/punch" and
work with it
turned off...
-Tom Unger
Similar Messages
-
Help!--export error Flash MX mov's to Quicktime mov's
Hey there,
I normally convert Flash Mx 2004 mov's to normal mov's using Quicktime Pro.
Now, I get an error with the "Export Controller". It usually stops at about %20 through.
The Flash mov's play fine, but won't export.
Any help is greatly appreciated.
-MattYeah, I did export a SWF
version 5
enabled flash in Quicktime
and it (the SWF) opens in Quicktime Pro, plays just fine, but then when I try to convert it to a MOV., the exporter crashes.
I can make a SWF movie into a MOV, right?
I'm trying to make a cartoon I made in Flash a MOV file I can upload to Youtube and other video sites.
Am I missing something?
Thanks for your continuing help, sir! -
Flex 2.01 and Flash 8 movie SOS, Help
Hi I need to Know when it finishes Flash 8 movies ?
Let me explain.
I have powerpoint presentation move to flash(
http://www.dreamingsoft.com/powerpointtoflash/quicktour.htm),
and work fine.
I need to put a mx:Button at the end of the movie
presentation, so I think why no use Flex.
Because my website is using CF MX 7, and I need to insert in
a DB when user click the Button.
But I can find the way to Know when it finishes Flash 8 movie
presentation ?
Is this posible do this ?Hi, there I found this.
Solution:
Using ActionScript 2 SWFs with Flex 2
http://weblogs.macromedia.com/pent/archives/2006/07/using_actionscr.cfm
Here is the answer. -
To start, I'm a total newbie in Flash, so I'm sorry if what I'm asking is ridiculously primitive, but I was literally thrown into this blindfolded and I'm using google and several forums to help me out.
What I'm doing: redesigning a website. At the moment, the website has a flash file that introduces it's logo and subcategories of its' website on the top of the page. What I wanted to do was make sure there was a hyperlink on the logo that would bring anyone back to the homepage, very basic stuff. The issue I have run into is that the logo is actually a flash movie. Different parts of the logo appear at different times, and I think this is what is specifically causing me issues.
The logo that I want to hyperlink has several layers, and what I've done so far is select them all and create a button (F8, select 'Button' and rename it). When I did that, I noticed the layers significantly changed and when I tested the movie, it looks terrible, choppy and not how it originally looked.
I know the step after that is to go into behaviors and insert the url to which I want it to be hyperlinked. The only thing is that I don't want to show a terrible flash movie to my boss even if it's hyperlinked to the homepage.
Anyone understand all that gibberish I wrote down? Or does anyone see a flaw in what I'm doing? I'm not 100% positive if the steps I'm taking are correct, I've been to several different sites, all of which tell me to do different things.
Initially I tried coding it with ActionScript, but I was having terrible issues with that as well.
If it helps, the file I'm working on was altered a while back. Could it be that the file is not compatible or proper for Flash CS5?
Help!!!... how do I give that shape/button a url?
Since it is a button, it is already a self animating object that will react to mouse interactions, but only visually at this stage. The first thing you need to do to make it useful code-wise is to assign it a unique instance name. So you drag a copy of it out to the stage from the library, and while it's still selected, you enter that unique instance name for it in the Properties panel... let's say you name it "btn1"
In AS3, to make a button work with code, you need to add an event listener and event handler function for it. You might need to add a few (for different events, like rollover, rollout, clicking it, but for now we'll just say you want to be able to click it to get a web page to open. In the timeline that holds that button, in a separate actions layer that you create, in a frame numbered the same as where that button exists, you would add the event listener:
btn1.addEventListener(MouseEvent.CLICK, btn1Click);
The name of the unique function for processing the clicking of that button is specified at the end of the event listener assignment, so now you just have to write that function out:
function btn1Click(evt:MouseEvent):void {
var url:String = "http://www.awebsite.com/awebpage.html";
var req:URLRequest = new URLRequest(url);
navigateToURL(req);
... how do I know it's properly placed on the correct area?
What area? If you place it where you want it, that should be correct. (?)
... how do I make sure it's invisible...?
If you can't see it when you test the file and you know it's there and your cursor turns into a hand when you are over where it should be, it's invisible.
...how do I see the other objects in the flash file I'm working on?
Select Edit -> Edit Document to get out of the symbol editing mode and back to the file editing mode. If you doubleclick an object on the stage, rather than clickingit in the library, you open it up in editing mode on the stage, but the stage and everything else will still be visible behind it in a faded tone. -
Flash Completion Movie Not Even Loading!
I, have recently not been able to access videos which,
require a movie player. I suppose it is out of date so I have been
trying to install the newest Flash Player and it doesn't even show
a flash completion Movie, and I have set there for over 10 minutes
waiting for the movie too come up..... I do not know if it is
finished or what, the loading bar movie thing dissapeared then the
whole movie window on the browser shrinks to really nothing, and no
movie is playing at all.... so what am I doing wrong? Please
help.Actually, I just visited the web page you identified in the initial posting and while my initial view of it did not show a Flash file, including right clicking the area, after distracting myself by looking at the page's source code, I went back to the browser window and I am now seeing a preloader screen that appears to be stuck on "Loading 0% of 0" and if I right click it now I get the expected Flash file menu. So I'd say your Flash file has some issues.
-
Flash Player movie not working.
Hi,
I tried to add flash player movie in website(www.consumer-court.in) but that movie is not working it is due to browser problem or need to install flash player in my system and my browser name and version is FireFox 3.6.
Please help.This doesn't seem to relate to Acrobat, so you should try one of the Flash forums: http://forums.adobe.com/community/flash
-
i can't open swf files for schoolwork. Installed VCL, Flip4Mac and Adobe flash and shockwave players. Can get white screen with connection erro message with adobe flash player. Help me!
Apple dropped playback support for .swf formats in QuickTime almost ten years ago.
Adobe Flash Player is the only way to view them. -
I have the 10.7.4 and I cannot get the Flash Player ,, please help me.
If you downloaded it, it's likely in your Downloads folder as a Disk Image .dmg. Just open it and intall Flash player and restart your browser. Everything should work.
Clinton -
Hi. Please can anyone show me how to install a flash document / movie into a powerpoint presentation so that the animation plays within the powerpoint? Thanks
wouldn't it make more sense that a flashtard is someone who
just generally sucks at flash and asks idiotic questions?
anyway, so i pretty much got the banner done - but i'm stuck
on one problem. I made a motion clip of a heart, and i want the
heart to fall from top to bottom, following a squiggly motion
guide, and to rotate 1/4 turn on the way. I got it as far as
following the motion guide, but when i try to select the instance
in the first frame and rotate it, shouldn't the motion tween make
it appear to slowly rotate, rather than stay put then rotate 1/4
turn at the last frame? When I select the clip and play around with
alpha and stuff, that works fine. What the heck? -
hello and thankyou for whoever is reading this for taking the
time! Im makinga band
web site and I made flash buttons in flash 8(not the
flash buttons in dreaweaver). now I need to add a link to each
button. How can I do this. I see that a lot of band pages are made
like this. take a look at www.relientk.com. Thats what im trying to
make. Can any one help me with Ho I could link a flash file????
linking flash FILE PLZ HELp
thank you so muchSee your answer on the DW forum.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"beliy333" <[email protected]> wrote in
message
news:enffbg$c3f$[email protected]..
> hello and thankyou for whoever is reading this for
taking the time! Im
> makinga
> band
web site and I made flash buttons in flash 8(not the
flash
> buttons
> in dreaweaver). now I need to add a link to each button.
How can I do
> this. I
> see that a lot of band pages are made like this. take a
look at
> www.relientk.com. Thats what im trying to make. Can any
one help me with
> Ho I
> could link a flash file????
>
linking flash FILE PLZ HELp
>
> thank you so much
> -
Adobe flash webcam crash help,
adobe flash webcam crash help,
Hello,
I have followed all the steps on the site,, My webcam works on other programs, ie: yahoo, aol, skype. The crash issue I'm having is, When I turn on my webcam through Firfox - adobe, The webcam goes on, sometimes for only a second, sometimes for a min, so I know it works, but then every time, all the time it crashes, Every time, on different sites, Again I followed all the steps, including, uninstalling, and using 10., and then 11.2 and back to where i started with 11.3.
Please help, and thank you for your time.
Best wishes,
Grant
Problem signature:
Problem Event Name: APPCRASH
Application Name: FlashPlayerPlugin_11_3_300_262.exe
Application Version: 11.3.300.262
Application Timestamp: 4fe20fae
Fault Module Name: YCWebCameraSource.ax
Fault Module Version: 2.0.8342.3407
Fault Module Timestamp: 4acc3fd6
Exception Code: c0000005
Exception Offset: 00004fca
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: a7aa
Additional Information 2: a7aa91f17ea749d42a4de3b390fa5b3d
Additional Information 3: a7aa
Additional Information 4: a7aa91f17ea749d42a4de3b390fa5b3d
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtThis looks like an Adobe Flash issue, not a Firefox issue. Have you tried asking in the Adobe forums? I did a quick search and found this: http://forums.adobe.com/thread/769338
-
Maximum frame bytes in 15 fps Flash 8 movie
I have a Flash 8 movie, with several motion tweens that take
the average frame size from 200 bytes up to 1000 at about halfway
thru my movie. What is the max acceptable when designing movies at
15 fps? And is there a way around this that won't cause delays in
downloading?
thanks."David Stiller" <[email protected]> wrote in
message
news:es1cjd$h6p$[email protected]..
> Steve,
>
>> I need to combine multiple source videos into a
single
>> Flash video file. Trouble is those source videos
don't
>> all have the same frame rate. For instance in one
piece,
>> the source frame rate is 13 fps, and in another it
is 30 fps.
>
> Aha. Actually, not to worry. :) Dynamically loaded FLV
framerates
> are independent of the SWF's framerate. So leave those
FLVs outside the
> SWF and load them in -- you'll be set. (See the "Working
with Images,
> Sound, and Video" > "About using FLV video" topic
under the "Learning
> ActionScript 2.0 in Flash" doc.)
I'm soprry, I should have been more explicit. I am importing
to Flash 8, but
I have to publish as Flash 6 so it's not flv files I am
creating, so thus
not dynamically loaded flv. These files are being presented
inside an
Authorware file so Flash 6 is a must ... I cannot use the
Flash AX control,
I have to use the internal Flash suppor provided by
Authorware.
>
>> Is there a 'best practice' method for combining
these
>> videos in Flash and retaining the best possible
quality?
>
> Do you mean compression-/bitrate-wise? If so, that's one
of those
> "more an art than a science" things. But framerate won't
make a
> difference.
No, compression is less of an issue for me ... I have a
handle on that black
art. It's just the reconciliation of multiple frame rates I
need to get to
the bottom of :-)
Steve
EuroTAAC eLearning 2007
http://www.eurotaac.com
Adobe Community Expert: Authorware, Flash Mobile and Devices
My blog -
http://stevehoward.blogspot.com/ -
HT4993 A CHINESE STUDENT REALLY NEED YOUR HELP!!
A CHINESE STUDENT REALLY NEED YOUR HELP!!
Dear Sir or Madam,
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked ,it was excepted to be a global phone. But now I come across with some problems in China using local carrier, everything is working properly except sending text message, and iMessage and Facetime also seem not to work.This is very serious for Apple and me! Will I have the chance to fix this?
I tried all the possible solutions from the Internet, and the Official solution offered by Apple (http://support.apple.com/kb/TS4459), but it doesn't seem to work.
Will Apple help me with this issue? Please do.
Information of my iPhone:
SN: :F1*******8GJ
<Personal Information Edited by Host>luyao49 wrote:
A CHINESE STUDENT REALLY NEED YOUR HELP!!
Dear Sir or Madam,
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked
No such thing is sold from any authorized source in the US. The Sprint phone is not unlocked. It can be unlocked by Sprint for use on international (non US) carriers for current Sprint customers in good standing after completing (I believe) 60 days of service.
If you are having problems using certain features on an unsupported carrier, you'll have to work it out with your carrier. -
My rental stopped mid-movie, Help. This has happened multiple times to me before too. I demand I get a refund.
Hey preachit,
It sounds like we are running into issues with the iTunes software connecting to your device. If possible, lets try plugging your iPhone 5 in with a different cable. Also, try plugging it in to a different USB port on your computer:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
We may need to isolate the issue down to the iPhone or the current installation of iTunes. If the above steps have not resolved your issue, remove and reinstall iTunes:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
Thanks,
Matt M. -
Flash Newbie needs help with Movie Clips/Action Scripting
Hi -
I'm having a problem with my movie clips playing
simultaneously and cannot, for the life of me, figure out what I
have done wrong. I'm new to flash, so I may have set something up
incorrectly, but here's what I have so far:
11 layers, total: 1 layer with 10 control buttons, each
button with the following actionscript:
on (release) {
gotoAndPlay(85);
Where the number changes in relation to which keyframe the
next movie is on.
I have 10 movies, total, but they are only movie clips,
essentially photo slide shows with audio, made all in the library.
The problem happens when I click on the second or third
button. Not only does the movie that I have selected begin to play,
but all of the previous clips do as well, so it all sounds quite
garbled. I don't know what I am missing in the action script, as my
Action Layer has a stop command on it at each keyframe where there
is a new clip to play.
I have tried to add a stopAllSounds command, but I'm afraid
that doesn't do anything because it is not a "sound file" per se,
playing in the timeline.
I'm at the end of my rope and really need some help in
figuring this one out. My project is hanging in the balance on
this, as I have scripted everything else correctly and it runs
beautifully.
Please help!
Thanks,
CarolineEach layer has a blank keyframe before and after each
movieclip. Each movie clip is at a different frame. Even with the
blank keyframes added, the second video starts to play and then the
first video begins to play. Same happens if I click on the third
button. Third plays, and starts 1st and 2nd shortly thereafter. Is
there an action script I can put in that will tell the timeline
that, when a button is clicked, no matter where the movieclip is,
it will stop and start the newly selected movieclip?
Maybe you are looking for
-
Does anyone know, why Apple divides App Stores by country? My two issues are: 1. I am a russian guy working in South Korea, so I need both stores. Russian, because it's my native language and I want to keep in touch with my homecountry; and korean, b
-
How to make Internal consignment???
I define a Storage location on a ship, i want to give stock to this storage location as a consignment stock . So how to make a internal consignment to a Storage location? how to give a consignment stock to a storage location???
-
Another 13" vs 15" MacBook Pro Thread
I'll try to make this as short and simple as possible so as not to tire anyone. So I'm planning on buying a new MacBook Pro very soon and I've been shopping around the past few days trying to collect all the info I can about this machine to help me d
-
Extension numbers not synchronizing with CUCM
Hello everybody. I'm having the following issue with synchronism as you can see on the tittle above. The client also says that the extension numbers are not updating according to the Active Directory. I went to "System/LDAP/LDAP System" in the CUCM a
-
Hello, I have a G3 Pismo powerbook. It is listed as supported on the Tiger information page and has all required- speed, memory, firewire and DVD. I put in a new hard drive and tried to install Tiger with the full retail black X install DVD (the very