Studio Pro 4 not Encoding stays at 0% when burning Movie

I updated to Leopard and just did a video in FCP and exported using quicktime settings. When I created the project in Studio Pro it comes out to 2.5GB. My Bit rate is at 3.7 and when I try to burn my ecoding does not move at all! It stays at 0%
Has anyone had this issue, or can anyone help me get pass this 0%encoding?
Thanks
George

Try making the m2v and AC3 files outside of DVD SP in Compressor.
Also note that Leopard and Studio 2 has some issues, depending on how things were installed (though I do not recall this problem).

Similar Messages

DVD Studio Pro 4 not encoding???

OK... so I just got done making my project file in DVDSP 4. As I have been going along, it has been encoding assets just like usual. Right before I burned my project to disc, I noticed a problem in the Motion file I made for the menu and in the video track itself. I fixed them both, re-opened my DVDSP project and was warned that some assets have changed.... like usual. I click OK, and it re-encodes the video track..... BUT not the Motion file. I exit DVDSP and re-open again, and it seems to be working ok. This is my first go at DVDSP 4.... am I missing something here???
I should add that it did the same thing earlier when I tried to build my project.... it sat at the "Encoding Asset" phase for over 2 hours. I cancelled the build only to find that it hadn't even started the encoding process. In hind sight, I have been noticing version 4 is MUCH slower than version 3 was. This is my first go at DVDSP 4.... am I missing something here??? Any input would be fantastic!!!
Thanks again,
Chris

MJax4 wrote:
Give this a try...
Instead of letting DVDSP do the encoding, let Compressor do the work and bring the asset in already to go.
I was considering this plan of attack.... which settings do you use in Compressor? Will there be a noticeable difference between "Fastest Encode" and "Best Quality"?

DVD Studio Pro will not recogise my chapter markers!!!

When I export my Quicktime movie from Final cut, I include the DVD Studio Pro markers.
However, when it gets into DVD Studio Pro, it does not recognise them at all.
I tried in vain to go back to Final Cut Pro and export the markers "as a text file" but could not find anywhere to do that. I looked at XML exporting but that did not work either!
How can you get Final Cut Pro to just export chapter markers.
Help!

You might also try right-clicking on the mpeg in the track in DVDSP and choosing "add embedded markers". I think I remember noticing that markers did not necessarily import automatically when adding an mpeg to a track, if there were any markers already in that track (with the exception of the un-deletable first one).
There is also an option in the Compressor preset, in the Encoder pane of the Inspector, under Extras, where the inclusion of markers can be checked on or off. If you are exporting to a Quicktime movie before importing to Compressor, you should be able to see the markers in the preview window by choosing to show them from the markers dropdown to the right of the Compressor preview window's scrubber bar.
Hope this helps.
Max Average

Idvd & dvd studio pro disc not playing properly in other players

Hi
I have edited a program for the past 3 DAYS, and i have burned the program using IDVD, DVD studio pro, and Toast Titanium.
It plays ok on my G5 and my laptop G4.
And every lousy time i give the disc to the client something different goes wrong.
If it's not a lockup,it's artifacts, and programs jumping forward and backwards between scenes, by itself.
I'm using Memorex and Philips DVD discs.
My Toshiba DVD appliance deck burns the program beautifully and no hiccups.
But the customer wants the lovely menus that apple has designed
Personally i am sick and tired of apple and all the "perfect world marketing" , i had yet to burn a DVD disc with idvd or dvd studio pro with any confidence.
Apple should get into the " Bovine scatology " business, at least when that gets spread something grows despite the smell.
Anyway, i don't know if anyone can help me or not .
Any help would be appreciated.
Thank you
Vic.

While I can understand your frustration, I believe the problem here is in the encoding settings. iDVD doesn't give you much control over specific encoding settings, whereas encoding through Compressor will.
Some specific things are missing from your post. What is your workflow? How are you exporting your timeline? What format is your project (DV, HDV, DVCPRO, PAL, NTSC)? When you built your DVD in Studio Pro, what encoding settings did you use? Do you know where the encoding settings are? What are the settings for your DVD project (SD or HD)?
You would do yourself and your client good to take some time to read over proper DVD mastering workflows. It's really quite painless once you understand how things work. Blaming Apple for this is not a very helpful way to solve your problem.
The tutorial DVDs that came packaged with your install discs will also help. Just look at the lessons for DVD Studio Pro.
Encoding settings for SD DVDs.

DVD studio pro will not burn menus PLEASE HELP!!!!!!!!!!!!!!

PLEASE HELP!!!
I have created a project, a DVD with menus and subtitles in 2 languages, yet when I burn the DVD (both using build/format option and build format options separately)the resulting DVD has no main menu, actually it has no menus at all! it goes straight into the DVD film where I can change subtitles language only from the remote buttons. The project compiles successfully but once formatting it gives me two hilghlighted errors in the log (which I gather are the layouts/menus)HERE IS THE LOG (highlighted part is error message):
Building Project Treesitting DVD with sub+menu
17/12/2007 14:12:01
Build Folder /Users/adelitahusni-bey/Library/Caches/DVD Studio Pro Files/HVDVDTS/HVDVDTS/nomad/treesit dvd
Starting DVD Build TREESITTINGDVD_WITHSUB...
Compiler Initializing...
Precompiling Project TREESITTINGDVD_WITHSUB
Compiling VMG Information...
Created 15 PGCs in VTSM1
Created 8 PGCs in VMG.
2 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Skipped Rendering Menu:Menu 1,Language:1.
Compiling Menu#2 (Menu 2)...
Skipped Rendering Menu:Menu 2,Language:1.
Writing HV000M02.EVO
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Preparing Subtitles...
Muxing HV001T01.EVO
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
+*Warning: The file ‘TREESITTINGDVD_WITHSUB.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
+*Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing UDF 2.50 structures
Writing files
Writing final UDF information
Formatting finished.
Formatting finished.
DOES ANYONE PLEASE KNOW THE REASON FOR THIS???? AND HOW TO SOLVE IT???? PLEASE PLEASE PLEASE...HAVE TO SEND THIS PROJECT OFF SOON.
I have burned another project with menus succesfully..

Hi
FIRST check that your Play Movie button in your menu has NOT an Auto Action selected that make it plays automatically your movie when the Menu loads. You'll find that setting in the Advanced tab of Inspector. If not . . .
You can try a workaround, no matter that if you have your Menu as First Play it must work. Try yhis:
- Create a simple black JPG file i.e. in Photoshop
- Create a Slideshow
- Add a the JPG to the slideshow, set duration 2 secs
- Set the Slideshow as First Play
- Set Slideshow End Jump to your Main Menu
Build and burn again.
Alberto

HD DVD Authored in DVD Studio Pro does not play - any suggestions?

so i've built a hd dvd in dvd studio pro. here's the odd thing. once built, the hd dvd files sitting on a folder on my hard drive can be played by dvd player. but when i burn these files onto a disk using toast, the apple dvd player can't play them. and they don't play on any of my dvd players either. anyone ever run into this problem?

HD DVD required UDF 2.5. Not sure if Toast supports that. Burn with DVDSP instead. HD DVD required an HD DVD player as well.

DVD Studio Pro will not burn DVD in Lacie D2 External DVD Burner

I ordered a new pack of DVD's. These are the Beall 16x DVD's I bought from Meritline.com. I had been using the 8x Beall's with no problem. I was told that my interal drive was not compatable with the faster burning DVDs. So I bought a LaCie D2 External DVD burner 16x. I still can't burn a dvd in dvd studio pro. I tried Patchburn. It said that this burner is already supported.
I am using DVD Studio Pro 2.
Any ideas?

Have you tried burning on other types of brands when burning to your external LaCie? My company bought a NEC external DL burner and it only worked with some type of discs, Maxell DVD+R DL worked but Traxdata DVD+R DL and some other Noname disc didnt work, maybe try that?

DVD Studio Pro will not load videos

Hello,
Ever since I upgraded the latest Quicktime Update I cannot load video assets into DVD Studio Pro. The program keeps locking up.
I have deleted my DVD Studio Pro preferences several times with no success.
Any Ideas?
Thanks,
Mike Kommersmith

When you try to load video assets from the palette, the spinning ball just comes up. I didnt leave it that long before force quiting. But the poster left if for an hour.
I'm using final cut studio. But it all happened on my imac and macbook pro right after the quicktime upgrade.
I did find a work around, which I posted above. Instead of importing thru the palette, just import by clicking file / import/ asset. But the heck would cause the palette to lock up like that? When you force quit dvd studio it says "not responding" next to the program name. I've tried all different video files on my desktop, one at a time. But I dont think the program even gets that far, it just locks up as soon as you hit the palette area of the screen.
I can import audio, stills ,etc without a problem.
I'm just amazed that noone else ran into this problem yet.

Dvd Studio Pro Serial Not Working

Hi all,I recently had to replace my late 2005 G5 Powermac due to its inconsistency in powering up.
Cutting the story short,I bought a second hand PowerMac which Ive been using for the past months with no problems,I re installed my Original compy of Final Cut Studio and everything seems to work fine,oly today Ive tried to burn a project on DVD with DVD Studio Pro 4 and it will not accept my original serial !
Ive already tried deleting the FInal Cut System ID and reinserting the serial but no luck.
Anyone had this problem before ? If not ,how could I claim Apple ?after all the original suite cost me back in its day around 1000euros.
Thanks

kkita75 wrote:
Thats the version I have on my laptop,sorry !
Well, there never was a Final Cut Studio 9. So I'm still confused. What version is listed on your disk?
DVD SP shouldn't be asking for a serial number if the FCS suite was correctly installed.
Download this utility and remove DVDSP (it will ensure that you get all the associated files). Reinstall from the install disks. Then run Software Update repeatedly until there is nothing more listed. Repair permissions in Disk Utility and launch DVDSP.
I wouldn't be surprised if this fails to cure the problem. If it doesn't work, repeat the process and uninstall the entire suite, running Software Update, and so forth.
Russ

Logos look fuzzy in Studio Pro but NOT in the original QT movie

I assembled a flying logo (Photoshop) over video in Adobe After Effects and exported it as a Quicktime movie. The Logo looks anti-aliased and great in both AE and the Quicktime movie. But when I look at it in DVD Studio Pro it looks horrible (jagged and fuzzy). The video looks OK. I've done this a hundred times and never had this problem before!

No I haven't burned a DVD yet. I was hoping that perhaps it was just the viewer resolution in Studio Pro and that the video would look better once it was burned to DVD. I just don't recall seeing this happen before (the viewer window has always looked pretty true) and I've been working with SP for years. Maybe I'm just getting old and my eyes are going.
Guess I should try to follow through on authoring and see what I get.

Is it true that DVD Studio Pro will not burn HD discs?

I an considering shooting in HD and editing that in Final Cut Express, but I have been told that DVD Studio Pro won't create a HD disc without a very expensive addition of something called Blue-Ray. Are there any advantages of shooting in HD, if the final disc won't support it? Would the aspect ratio be 16:9, but with no better definition?
Thanks, Bob

You're better off putting it into Compressor and using one of the DVD presets such as DVD Best Quality 90 mins. That will give you much better quality than DVD SP's built-in compressor.
SD stands for Standard Definition and refers to NTSC, PAL, SECAM, etc, depending on which country you are in.
In DVD SP you can change the aspect ratio settings so that it will display in 16:9 on a widescreen TV but letterboxed on a 4:3 screen.

Buttons work in DVD Studio Pro, but not in DVD Player. Why?

I recently upgraded I movie I made to Dual layer disk. I had already built one for a standard 4.7 dvd but now I was putting on a director's commentary so I need more space. So I opened up the original DVD Studio Pro project, thats worked fine for over a year, then saved it as "director's commentary", then simply changed the settings for a Dual Layer. In DSP the buttons on the first menu work fine. But when I build it and open it up in DVD Player the buttons dont activate. Even when you roll over them there is nothing there.
Whats happening?

You can find information on Reader Extensions on the developer center: http://partners.adobe.com/public/developer/livecycle/readerextensions/devcenter.html
For help with the buttons to navigate, go into Designer help and search for "Attaching a database script to a button" (without the quotes) and this should provide you with the information that you need.
Michael, is this where you found your information the first time?
Catherine

DVD Studio Pro: DVD not opening to First Play menu

DVD Studio Pro: My DVD plays video instead of opening to a menu even though I have "Menu 1" in my First Play field

Are you sure? Does the menu have the First Play symbol in the top left corner?

DVD Studio Pro 4 doesn't see my dual layer burner

Not too long ago, I upgraded my superdrive to the MCE 16X DVD-/+R drive with double layer support. Now, when I try to burn to DVD Studio Pro 4, the drive is not listed as an output option. The only thing listed are my hard drives. Allegedly, this drive is supposed to have native support with both DVD Studio Pro 4 and Tiger. Short of taking out this drive and putting the single layer drive back in, does anyone have a suggestion?
By the way, it WILL burn CDs in ITunes...
Judy
G5 Dual 2.5 GHz Mac OS X (10.4.8)

Don't know much about the burner, but can you can use Toast or Disk Utility as mentioned in may threads involving alternative burning outside of DVDSP?
If so then there ya go but if not then back to single-layer I guess.

Updated DVD studio pro 4.2.1 and now I cannot import .mov files?

I just updated to OS 10.5.7 and DVD studio pro 4.2.1 and now can only open half my previous project files (yet others open fine still done at the same time) and also can no longer import any 1920x1080i HDV files exported from Final Cut Pro, where I could before, if I didn't want to deal with the 17 hour compressor m2v export. On a deadline and of course the 2 files I need to update no longer open. Help!

yes. its bizarre as I can only import m2v's now vs .mov files before. Keep getting error messages, as well as only opening about 50% of my DVDSP project files, yet all have the same basic elements & settings. Exporting my files as m2vs which should work, but wondering why this is and if I'm the only one experiencing and if there is a fix?

Studio Pro 4 not Encoding stays at 0% when burning Movie

Similar Messages

Maybe you are looking for