SU01 - Ticket Number to be logged

Dear All,
We are in a position to save the ticket numbers for the changes made to the user master records.
Could anyone please guide me to do the same.
I have tried to enhance using a BADI - HRBAS00INFTY, but ended up in vain.
This task will be helpful for us during audit.
Thanks,
M.Thiyagarajan

We are still on 4.6C and have been using the fax and telephone fields for about 8 yrs now without issues.  Our Ticket number format is either 123456789/2011 or ABCD123456. You can extend the fax and telephone fields and to enter more numbers using the arrow on the right of the field.  I'm not sure if there is a limit on the number of entries, I see 12 rows, but we have never run into this issue on the number of tickets.  There is also another part that I like with it is there is a comment field as well.  I just took a look at the two fields you mentioned Country is at random and so is Country Code, we use for the most part IT for Italy and +39 for CC.
One thing that has confused me to this point is traceability.  Is there a way to link back to the changes made in SAP to a ticket number in GRC?  What I have been doing is reviewing ID's and Change Documents then doing the search for the ticket in GRC, is this the right way?

Similar Messages

  • Using MIN clause in Oracle to get a ticket number with an oldes date

    i am stuck with the following simple syntax..
    i need to pull the oldest billnumber ..ultimately i need to see the ticket number with the oldest date .
    here is my select statement using an openquery from SQL server to oracle..
    (SELECT * FROM OPENQUERY(B_COUNT,
    'SELECT
    TICKETID,
    MIN(CREATE_DATE)
    FROM TABLE
    WHERE
    CREATE_DATE >= ''1262304001'' AND CREATE_DATE < (trunc(SYSDATE) - to_date(''01-JAN-1970'',''DD-MON-YYYY'')) * (86400) AND
    STATUS = ''0''
    any help will be appreciated
    thanks

    938115 wrote:
    I also got this text file after the command was executed along with the GIS.bad file
    SQL*Loader: Release 11.2.0.1.0 - Production on Fri Jun 1 09:56:52 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    Control File: bill.ctl
    Data File: GIS.csv
    Bad File: GIS.bad
    Discard File: none specified
    (Allow all discards)
    Number to load: ALL
    Number to skip: 0
    Errors allowed: 50
    Bind array: 64 rows, maximum of 256000 bytes
    Continuation: none specified
    Path used: Conventional
    I have thousands of records in this file and only 64 of them updated.How many record were in the table before and after? I doubt the difference is 64, unless you have exactly 64 rows but you said thousands. I believe you are probably misinterpreting the log file. can you share the full log file? As a test, create a empty table, use the same script and load same data file in this empty table. Once loading is complete, check if it has 64 rows or more. I believe what log file is saying, it is 'commiting after every 64 rows', not 'stopping after loading 64 rows'.
    So, unless you show us the log file there is no way to be certain, feel free to mask confidential info, at-least top 15 and bottom 15 lines ?

  • HT4623 I received a ticket iOS diagnostics ticket number 72181, however every time i press quick test. It says the ticket number was not found. Verify the number and try again. But that the ticket number i received.

    I received a ticket iOS diagnostics ticket number 72181, however every time i press quick test. It says the ticket number was not found. Verify the number and try again. But that the ticket number i received.

    I have never read so much information. There is no charge to change your cell number. However only the account holder can log in to My Verizon Web Portal http://www.verizonwireless.com and click on her second line (your phone should be shown)
    I cannot fathom unless your sister gave you account access the ability to pay each line separately.
    Just pay your sister and have her pay the complete invoice when due. Problem solved.
    You could also to an assumption of liability on that second line on your sisters account. Call *611 or 1-800-922-0204 and make sure your sister is right there with you to do this. Then the line comes off her account and you can then set up your own account with verizon.
    You can also switch to T-Mobile now and they will pay off that early termination fee and give credit for your old verizon device, but you have to buy a new phone over time payments from T-Mobile. Please note a hard credit check will be done by verizon if you break off of your sisters account for one of your own, and T-Mobile also does a hard credit check before they provide service. http://www.T-Mobile.com
    Good Luck

  • Table to find d relationship between ticket number and ext notification no

    dear sir ,
                   while creating the support message from help menu it will generate the external notification number as well as ticket number both are same but while creating frrom crmd_order it will generate only ticket number .. so now i want to  table  where they mapped between two fields ticket number and notification number .. please reply
    regards,
    kumar

    Hi Kumar,
    Goto Crm_dno_monitor tcode and here configure the layout.....
    Select the column external ref no and notification no...you get both the no.s as req.
    Please reward points.

  • I cannot connect to ITunes after updating to IOS 7.0.2,cannot update my apps nor download new apps. When I tap the quick test for IOS diagnostics it says it cannot verify the ticket number.

    After updating to IOS 7.0.2 in my Ipad mini I cannot update my apps nor download new apps . It says "cannot connect to ITunes. " it's been almost 3 wks now. I have tried resetting it  and trying other options like changing the DNS to just 8.8.8 etc but to no avail. I try to run the IOS diagnostics but it couldn't verify my ticket number. Everytime I open my mail it cannot identify server identity " Apple.imap.yahoo.com." But I just clicked "continue" anyway so I could get my mail.

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • How do I find the number of users logged on another server?

    I'm trying to ping other servers and find the number of users logged on that server. Any leads?

    Do you need maybe something like this?
    FINGER(1) UNIX Reference Manual
    NAME
    finger - user information lookup program
    SYNOPSIS
    finger [-lmMspho] [user ...] [user@host ...]
    DESCRIPTION
    The finger utility displays information about the system users.

  • How to find the number of users log into ESS for last three months

    Hi Team
    Is there any transaction / Report to find the number of users logged into the ESS and used the payslip tab. Is this possible to find?
    Waiting for hopeful replies.
    Regards
    Bhaskar

    Bhaskar,
    you can use google analytics,
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b94044-7008-2b10-1680-c04e4526367b
    jo

  • I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    Please then use your web Browser  address http://www.adobe.com/  and sign in with your Adobe User ID and Password to your account the has your Subscription and use https://www.adobe.com/account/my-products-services.html capture the page which shows you have a subscription like I showed you I have.
    Open Adobe Creative Cloud desktop application use the APP tab and capture that scree to show Photoshop is installed and up to date like I did. Capture that screen. Show us you have installed Photoshop and its up to date.
    Open Photoshop and use menu Help it should show tha its activated because there will be a menu item Sign Out. If it is Sign In, Sign in  using the account that has the subscription the one you used above to Activate Photoshop.

  • Issue with the steps in adding the ticket number in the ERMS email

    CRM 5.0  SP09
    Read the CRM expert article written by John Burton to add a ticket automatically to an email reply and was able to get it to work. (had to apply note 954060 to get the variable in the mailform)
    But in our normal processing steps the ticket number hadn't been created and was looking for a way to generate the number.
    Normal steps.
    1. Inbox - select Emails in process, select one and interact.
    2. Confirm BP or create a BP and confirm.
    3. Choose Email from nav bar and reply.  the ticket number is not filled i.e.
    If I change the steps to
    1. Inbox - select Emails in process, select one and interact.
    2. Confirm BP or create a BP and confirm.
    3. Select interaction record and save (service ticket # shows)
    4. Choose Email from nav bar and reply.  and value fills in.
    Is not a major issue, but users are always looking to reduce the number of clicks for the agents as they are being converted from using Outlook to ICWC for email repsonses.
    Thanks,
    Glenn

    Hi Glenn,
    I am not sure that I (or other readers) may fully undestand the issue, so I want to clarify a couple of points.
    It is not quite clear to me whether the emails that you are processing in the Agent Inbox are replies from customers (which already contain an ERMS tracking thread) or whether they are new emails?
    I will assume that they are new emails. Also, I understand (from previous message threads) that you are using the Service Ticket as your leading business transaction, rather than the Interaction Record? Is this the case? If so, it is important to point out in such threads since the default process used by most customers to create an interaction record as the leading object and then create a service ticket in cases wehre followup investigation is necessary.
    In the normal proces flow, an interaction record is automatically created once a business partner is confirmed. So, in order to create a service ticket (and have the service ticket thread be automatically inserted into an email as a tracking thread) you first need to navigate to the Service Ticket screen (which results in the creation of a service ticket).
    But I am assuming, as mentioned, that in your case you are using the Service Ticket as the leading object? Does anything show up in this "Interaction Record" view in the lower-right-hand corner of the email editor currently? If so, maybe the problem then is that you need to replace the Interaction Record view inside the Email Editor screen with the Service Ticket view instead? This could be causing the problem that the non-existant Interaction Record is being set as the current One Order object instead of the Service Ticket. This is really jus a guess on my part, but maybe worth checking.
    See also SAP notes 1032743, 1169373, 1157402
    Warm regards,
    John

  • TICKET Number (TICKETNR) not populated

    Hi,
    I am trying to create and actualize tickets using following function modules in given a sequence.
    1) OIJB_TICKET_DEFAULTING
    2) OIJ_EL_A_TICKETS_MAINTAIN_N
    3) ENQUEUE_E_OIJTKT
    4) OIJB_GENERATE_DOCUMENTS_N
    5) ENQUEUE_E_OIJTKT
    Function modules are working fine and able to create and actualize tickets.
    I am creating more than 1 tickets in loop.
    But only for first ticket TICKETNR (Ticket Number) is populated. For rest tickets it is blank.
    TICKETNR is generated in function module OIJB_TICKET_DEFAULTING.
    This is auto generated number.
    Any Idea why it does not create TICKETNR from second ticket onwards?
    Thanks & Regards,
    Umesh

    Arun:
    Your situation is as expected - the address number will not be saved to BUT000 but to BUT020 or BUT021* tables.
    regards,
    bill.

  • Generate a ticket number

    Can I add a ticket number or request number (tracking number) to a form when a person fills out and hits submit. Then when they receive their submission notice can they get that number?

    You need to generate unique number with the ID column and add an action in the submit button to show message. Refer to the following post for more information
    http://www.infopathdev.com/forums/t/28374.aspx
    http://www.infopathdev.com/forums/t/22295.aspx
    http://blogs.technet.com/b/jessmeats/archive/2009/08/10/generating-a-unique-form-number.aspx
    --Cheers

  • Job number from alert log file to information

    Hello!
    I have a question about job numbers in alert log file. Today one of our Oracle 10g R2 [10.2.0.4] RAC nodes crashed. After examining alert log file for one of the nodes I saw a lot of messages like:
    Tue Jul 26 11:52:43 2011
    Errors in file /u01/app/oracle/admin/zeme/bdump/zeme2_j002_28952.trc:
    ORA-12012: error on auto execute of job *20627358*
    ORA-12705: Cannot access NLS data files or invalid environment specified
    Tue Jul 26 11:52:43 2011
    Errors in file /u01/app/oracle/admin/zeme/bdump/zeme2_j001_11018.trc:
    ORA-12012: error on auto execute of job *20627357*
    ORA-12705: Cannot access NLS data files or invalid environment specified
    Tue Jul 26 11:52:43 2011
    Errors in file /u01/app/oracle/admin/zeme/bdump/zeme2_j000_9684.trc:
    ORA-12012: error on auto execute of job *20627342*
    ORA-12705: Cannot access NLS data files or invalid environment specified
    After examining trc files I have found no further information about error except session ids.
    My question is: how to find what job caused these messages to appear in alert log file.
    How do I map number in alert log file to some "real" information (owner, statement executed, schedule)?
    Marx.

    Sorry for the delay
    Try this to find the job :
    select job, what from dba_jobs ;
    How do I find NLS_LANG version?SQL> show parameter NLS_LANG
    Do you mean ALTER SESSION inside a job?I meant anywhere, but your question is better.
    ORA-12705 - Common Reasons and How to Resolve Them [ID 158654.1]
    If OS is Windows lookout for NLS_LANG=NA in the registry
    Is it possible you are doing this somewhere ?
    ALTER SESSION SET NLS_DATE_FORMAT = 'RRRR-MM-DD\"T\"HH24:MI:SS';NLS database settings are superseded by NLS instance settings
    SELECT * from NLS_SESSION_PARAMETERS;
    These are the settings used for the current SQL session.
    NLS_LANG could be set in a profile for example.
    NLS_LANG=_AMERICA.WE8ISO8859P1     ( correct )
    NLS_LANG=AMERICA.WE8ISO8859P1 ( Incorrect )
    you need to set the "_" as separator.
    Windows
    set NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
    Unix
    export NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
    mseberg
    Edited by: mseberg on Jul 28, 2011 3:51 PM
    Edited by: mseberg on Jul 29, 2011 4:05 AM

  • How we know the Number of users logged into stratus?

    Hai,
    How can we  know the number of users logged into stratus? If we knows only,in our project we can check the users are valid/authenticated.can we check that?
    Advanced Thanx

    Stratus is adobe service which provides you with p2p id or say all your
    application's users a p2p id. Adobe doesn't have any admin section where you
    can manage/see all connected p2p users in your application.
    This you have to implement at your end in your application code i.e.
    authentication,validation and user counter.
    Thanks,
    Vivek.

  • "Message number 999999 reached, log is full" when generate BP comparison terms

    Hi,
    When Generate Comparison Terms for business partner in GTS SPL, system gave a performance message " Message number 999999 reached, log is full.  Message No. BL252"
    I tried to delete the relevant log in SLG2, but couldn't select any logs by transaction code. As I don't the object and sub-object.
    However, I used the program of BP comparison (/SAPSLL/SPL_CREATE_SEARCHTADRC) and transaction code (/SAPSLL/SPL_STBP), there is no log found in SLG1 as well.
    Any one know how to figure this issue? or how to find the related log object?
    There is no configuration of log profile assignment of BP comparison terms.
    Thanks for your kindly help.
    Regards,
    Ping

    Hi Ping,
    Therehave been previous posts on this topic.  PPlease search and find the answer.
    Regards,
    Dave

  • Huge number of unprocessed logging table records found

    Hello Experts,
    I am facing one issue where huge number of unprocessed logging table records were found in SLT system for one table. I have check all setting and error logs but not found any evidence that causing the unprocessed records. In HANA system also it shows in replicated status. Could you please suggest me something other than to replicate same table again, as that option is not possible at this moment.

    Hi Nilesh,
    What are the performance impacts on the SAP ECC system when multiple large SAP tables like BSEG are replicated at the same time? Is there a guideline for a specific volume or kind of tables?
    There is no explicit guideline since aspects as server performance as well as change rate of the tables are also relevant. As a rule of thumb, one dedicated replication job per large table is recommended.
    from SLT
    How to enable parallel replication before DMIS 2011 SP6    do not ignore its for SP06 == go through
    How to improve the initial load
    Regards,
    V Srinivasan

Maybe you are looking for