TICKET Number (TICKETNR) not populated

Hi,
I am trying to create and actualize tickets using following function modules in given a sequence.
1) OIJB_TICKET_DEFAULTING
2) OIJ_EL_A_TICKETS_MAINTAIN_N
3) ENQUEUE_E_OIJTKT
4) OIJB_GENERATE_DOCUMENTS_N
5) ENQUEUE_E_OIJTKT
Function modules are working fine and able to create and actualize tickets.
I am creating more than 1 tickets in loop.
But only for first ticket TICKETNR (Ticket Number) is populated. For rest tickets it is blank.
TICKETNR is generated in function module OIJB_TICKET_DEFAULTING.
This is auto generated number.
Any Idea why it does not create TICKETNR from second ticket onwards?
Thanks & Regards,
Umesh

Arun:
Your situation is as expected - the address number will not be saved to BUT000 but to BUT020 or BUT021* tables.
regards,
bill.

Similar Messages

Material number is not populating in PO in tcode ME23N

Hi,
The material number is not populating in PO in transaction ME23N. The coloumns is displaying as blank and supressed(Gray).
This problem occured during the upgradation from 4.6C to ECC6.0.
We have checked the SPRO configuration for field selections and these are not having any problem.
Data is updated in database tabes but it is not displayed in ME23N screen.
Please advice.
Thanks,
Rakesh

check OSS Note 492757 - ME21N/ME52N: You cannot set field selection for material
maybe it helps to solve your issue

HT4623 I received a ticket iOS diagnostics ticket number 72181, however every time i press quick test. It says the ticket number was not found. Verify the number and try again. But that the ticket number i received.

I received a ticket iOS diagnostics ticket number 72181, however every time i press quick test. It says the ticket number was not found. Verify the number and try again. But that the ticket number i received.

I have never read so much information. There is no charge to change your cell number. However only the account holder can log in to My Verizon Web Portal http://www.verizonwireless.com and click on her second line (your phone should be shown)
I cannot fathom unless your sister gave you account access the ability to pay each line separately.
Just pay your sister and have her pay the complete invoice when due. Problem solved.
You could also to an assumption of liability on that second line on your sisters account. Call *611 or 1-800-922-0204 and make sure your sister is right there with you to do this. Then the line comes off her account and you can then set up your own account with verizon.
You can also switch to T-Mobile now and they will pay off that early termination fee and give credit for your old verizon device, but you have to buy a new phone over time payments from T-Mobile. Please note a hard credit check will be done by verizon if you break off of your sisters account for one of your own, and T-Mobile also does a hard credit check before they provide service. http://www.T-Mobile.com
Good Luck

Delivery schedule line number in sales order is not populated in production

Hi all,
i am doing make to order scenario with 20 strategy group. In sales order we r defining the different delivery schedule lines.when i run the MRP and getting the plan orders for all the FG material and semifinished material, the sale order number and sale order item number is getting updated in production order . Beside these two , delivery schedule line number is not populated in production order.
please give your valuable suggestion .
i would be highly thankful to u
Will reward points.
Regards
Kumaraguru

Hi Kumar,
Some changes done in your PRD server.If yes then contact abap consultant regarding the same.
Because these type of problem comes when you do transport or changes done in the system.
Regards,
Anil

Delivery schedule line number in sales order is not populated in productio

Hi all,
i am doing make to order scenario with 20 strategy group. In sales order we r defining the different delivery schedule lines.when i run the MRP and getting the plan orders for all the FG material and semifinished material, the sale order number and sale order item number is getting updated in production order . Beside these two , delivery schedule line number is not populated in production order.
please give your valuable suggestion .
i would be highly thankful to u
Regards
Kumaraguru

Hi Kumar,
Some changes done in your PRD server.If yes then contact abap consultant regarding the same.
Because these type of problem comes when you do transport or changes done in the system.
Regards,
Anil

Issue with the steps in adding the ticket number in the ERMS email

CRM 5.0 SP09
Read the CRM expert article written by John Burton to add a ticket automatically to an email reply and was able to get it to work. (had to apply note 954060 to get the variable in the mailform)
But in our normal processing steps the ticket number hadn't been created and was looking for a way to generate the number.
Normal steps.
1. Inbox - select Emails in process, select one and interact.
2. Confirm BP or create a BP and confirm.
3. Choose Email from nav bar and reply. the ticket number is not filled i.e.
If I change the steps to
1. Inbox - select Emails in process, select one and interact.
2. Confirm BP or create a BP and confirm.
3. Select interaction record and save (service ticket # shows)
4. Choose Email from nav bar and reply. and value fills in.
Is not a major issue, but users are always looking to reduce the number of clicks for the agents as they are being converted from using Outlook to ICWC for email repsonses.
Thanks,
Glenn

Hi Glenn,
I am not sure that I (or other readers) may fully undestand the issue, so I want to clarify a couple of points.
It is not quite clear to me whether the emails that you are processing in the Agent Inbox are replies from customers (which already contain an ERMS tracking thread) or whether they are new emails?
I will assume that they are new emails. Also, I understand (from previous message threads) that you are using the Service Ticket as your leading business transaction, rather than the Interaction Record? Is this the case? If so, it is important to point out in such threads since the default process used by most customers to create an interaction record as the leading object and then create a service ticket in cases wehre followup investigation is necessary.
In the normal proces flow, an interaction record is automatically created once a business partner is confirmed. So, in order to create a service ticket (and have the service ticket thread be automatically inserted into an email as a tracking thread) you first need to navigate to the Service Ticket screen (which results in the creation of a service ticket).
But I am assuming, as mentioned, that in your case you are using the Service Ticket as the leading object? Does anything show up in this "Interaction Record" view in the lower-right-hand corner of the email editor currently? If so, maybe the problem then is that you need to replace the Interaction Record view inside the Email Editor screen with the Service Ticket view instead? This could be causing the problem that the non-existant Interaction Record is being set as the current One Order object instead of the Service Ticket. This is really jus a guess on my part, but maybe worth checking.
See also SAP notes 1032743, 1169373, 1157402
Warm regards,
John

How do I remove an IOS Diagnostics panel - I lost the ticket number

I hit the face time problem and sent in a request before realising I needed to upgrade the IOS - which worked. I received the diagnostics email and panel for entering the ticket number, but deleted the email before recording the ticket number to enter in the panel. Any idea how to get rid of the diagnostics panel with no ticket number? Not very familiar with computers :-)

Hi there gjkweb,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
-Griff W.

Excise invoice Internal document number not populating.

Expert,
In STO supplying plant Movt-351 document posted , J1IS EXcise invoice has done ,here while saving the Excise invoice Internal document number not populating.
But number ranges (J_1iexcloc ) is done correctly against the year.
Logistics->Tax on Goods Movements->India->Tools->Number Ranges.
This is urgent Tickets ,can anyone help me out ?
regards,
kumar

Dear prasanna ,
Official excise document number in quality server is populating perfectly,where as prod server not populating , in quality server object is J_1IEXCLOC ,same object assigned to prod server . i did not assgined J_1IINTNUM object in Quality server.
why its not populating ?
thanks
kumar

Voucher number not populating for payments run through payment Manager

Hi
I have created automatic Document sequence for Check Payments category and assigned Document category in bank account and payment document, Voucher number is working fine for Manual payments, but when we run through Payment manager it is not populating Voucher number, Please help me on this issue.
Thanks in advance.

Hi.
The assignment must be created both for Manual and Automatic Methods.
Octavio

IDOC number is not in the list

Hi,
I am creating an inbound delivery using IDOC. The message type is DESADV and basic type is DELVRY01. After I have populated the control and data tables, I processed them using IDOC_WRITE_AND_START_INBOUND. I have generated the IDOC number after executing the program. The problem is, when I go to WE02, the idoc number is not the list. I am not sure if the IDOC I generated is successful or not. Does it have something to do with the FM that I used. I set a custom process code that will call the FM IDOC_INPUT_DESADV1. Please advise. Thanks in advance.
Lalyn

Hi Arun,
Thanks for the reply. But the IDOC number is not in the list and I can't access it WE19. Do you have any other Function module that I can use to process the IDOC in ABAP? The Function module should be the one to call the FM IDOC_INPUT_DESADV1 to create an inbound delivery. That's what I think causes the error. Thanks.
Lalyn

0PM_ORDER - WBS element not populated by extractor

Hi all
Just wondering if anyone has experienced a similar problem.
We use this data source as part of our PM master data loads. It runs every night, no problem. Iu2019m busy with a new user requirement regarding Project (WBS) costs as posted on PM orders, and I was pleased to see that 0PM_ORDER has field PROID (WBS) on it already u2013 thought I was half way to building my query!
Except, the field is not populated. Even when I run the extractor on the R/3 system to test (for an order type PM05 on which WBS element is a required entry), I never get any values in this field. I had a look on SDN and OSS and have seen a number of posts about the conversion exits relating to WBS elements, but this presupposes that a value is being populated in the extractor, which in my case is not happening.
Does anyone have any suggestions?
Regards, Lara

0PM_Order extracts the data of WBS element on the tab "location" on the PM order (IW33). It doesnt extract the WBS element on the tab "Additional data".
I am not sure how these WBS elements are different, your PS consultant might have an answer. Either you can have user exit to fill this field or ask your ECC abap consultant to fill the same in both fields of order, if doesnt make any difference. I am also in same situation, keep me posted if you have have get any new information from your PS consultant or SAP.

I cannot connect to ITunes after updating to IOS 7.0.2,cannot update my apps nor download new apps. When I tap the quick test for IOS diagnostics it says it cannot verify the ticket number.

After updating to IOS 7.0.2 in my Ipad mini I cannot update my apps nor download new apps . It says "cannot connect to ITunes. " it's been almost 3 wks now. I have tried resetting it and trying other options like changing the DNS to just 8.8.8 etc but to no avail. I try to run the IOS diagnostics but it couldn't verify my ticket number. Everytime I open my mail it cannot identify server identity " Apple.imap.yahoo.com." But I just clicked "continue" anyway so I could get my mail.

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Invoice output Condition type not populated for many invoice documents

Hi Guru's
Invoice Out put Condition type for printing not populated in the invoice document. Now We need to insert condition type for many documents to print at a time. We can manually place condition type at document header level individually for every document. But we have many documents to print.
plz advice me how to print all these documents
Thanks in advance.
Regards,
Ravikanth

Hi Ravi
Just take help from your ABAP team. Record the event in SHDB ask then to get invoice number from excel file and loop the program.
This will be more faster then LSMW.
I am giving you BDC code
report ZBILVF02
       no standard page heading line-size 255.
include bdcrecx1.
start-of-selection.
perform open_group.
perform bdc_dynpro      using 'SAPMV60A' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBRK-VBELN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBRK-VBELN'
                              '90010310'.
perform bdc_dynpro      using 'SAPMV60A' '0104'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBRK-FKART'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
perform bdc_transaction using 'VF02'.
perform close_group.
Regards
Vijay

Data not populating in database

Hi All
I am trying to insert data into a custom table but unable to do so...
Steps followed
1. Created a custom table
2. Created an EO based on the table
3. Created a VO associated with the EO.
4. Created AM and associated the VO with it.
5. Created page and associated it with the AM.
Controller Code
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    am.invokeMethod("initEmployee");
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    if("Next".equals(pageContext.getParameter("event")))
       pageContext.setForwardURL("OA.jsp?page=/xx0801/oracle/apps/per/selfservice/val_assignment/webui/PhonePG", null, (byte)0, null, null, true, "N", (byte)99);
if("Save".equals(pageContext.getParameter("event")))
am.invokeMethod("createEmployee");
}AMImpl Code
public employeeAMImpl()
    public void initEmployee()
      OAViewObject vo = getEmployeeVO1();
        if(!vo.isPreparedForExecution())
           {vo.executeQuery();
        Row row=vo.createRow();
            vo.insertRow(row);
        row.setNewRowState(Row.STATUS_INITIALIZED);
    public void createEmployee()
    getTransaction().commit();
...A new row does get created in the table but the data columns are empty only the creation date, created by, last_updated_by etc are getting populated.
Thanks

A: Data not populating in database

I have put the debug statement as follows:
public void createEmployee()
    EmployeeVORowImpl emp = (EmployeeVORowImpl)getEmployeeVO1().getCurrentRow();
   String name = emp.getEmployeeNumber().toString();
   System.out.println("Emp Num: " + name);
    getTransaction().commit();
    }The employee number got printed in the messages. However the row still doesnot have any data except the created by, creation date etc
Edited by: Subhasish on Jan 12, 2011 3:38 AM

Online number is not showing up in caller id

I live in the U.S. and my online number is not showing up when I call someone. Is there a way to fix this

unleashyourgeek wrote:
I am constantly having problems with clients not seeing my phone number when I call. Why is this happening? Your answer here was very short and not very specific as to how to resolve this. I have been fighting this for more than 2 months now but I keep paying for a number that people can't see when I call them.
I'm sorry I did not give an answer that met your level of specificity. The original poster did not post the number he/she was trying to call. This is also a worldwide forum mostly inhabited by Skype users along with some Skype employees who post from time to time. I'm not a Skype employee, just a user who makes use of many features of Skype to avoid paying more $$$ to the telephone companies.
When Skype users have Online Numbers, these numbers are not automatically used as Caller ID when calling telephones from a Skype account. This way, the Skype users hold the control over whether or not to have a working phone number show up as Caller ID. Most who have Online Numbers want them used as Caller ID, but the users - and not Skype - get that level of control. In my opinion, that's a good thing.
The surest way to see the current Caller ID settings for your Skype account and change them is to log into your account on the Skype web site (use the "account" link on the upper-right corner of the Skype web site). When you log in, you will see the current settings, and the link to make changes. If you have Online Numbers that can be used for Caller ID, you can select them. Online Numbers in the USA and the UK are examples of the numbers that can be used as Caller ID from Skype, and numbers from Mexico and Australia can't be used as Caller ID. You also have options to use different numbers as Caller ID for calls to telephones in those countries, and have a "default" number used for Caller ID anywhere else. In my case, my default number for Caller ID is my US Online Number, and my UK Online Number is used as Caller ID for calls to the UK.
Even with these settings properly configured, there are still occasions where your number (an Online Number, or a mobile number which has gone through the verification process with two SMS messages) will not appear on the Caller ID displays of the phones you call. This is generally outside the control of Skype. If you are using a number that is not a "local" number in the country that you are calling, it too may not show up on the Caller ID display. Instead of posting on the community forums, using the Support link at the top of this page may be the better way to go. You can go through the knowledge base trying to find a solution, and end up opening a support ticket with Skype. If you have a subscription, you may be able to go to a live chat with Skype support.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

TICKET Number (TICKETNR) not populated

Similar Messages

Maybe you are looking for