Sub: Withholding tax

Hi
While executing J1INCHLN T.code for creating Remittance Challan i am facing
with following error
"For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries"
Please help me in rectifying the error.
narayana

have reversed manually TDS amount?
also check TDS liability is there in TDS a/c, with out liability in tds you can't update the challan number, but open items is not clear in withholding tax tables with_item.

Similar Messages

Dunning Wizard - Withholding Tax

Hi All,
SBO 2007 SP1 PL 07 or SBO 8.8 SP0 PL 11
The Dunning Wizard doesn't work for the A/R Invoice having the withholdin tax.
It includes the withholding tax in the amount to have. This is wrong!
Have you any idea how to fix this?
Simona
Edited by: Simona Bossi on May 26, 2010 11:19 AM

Hi Sekar,
I Reproduced the same scenario till delivery and used Doc. Gen wiz as target document as A/R Invoice it worked fine.
Settings BP and Item both we set to Witholiding tax Liable. The Invoice had withholdig tax amout added generated by the DGW.
Could you check in for the list of BP in DGW (Document generation wizard)
Business Partner --> Accounting tab --> Tax sub-tab --> WT taxes allowed and check if you have one WT checked.
Let meknow if this works.
Regards,
Rakesh

Withholding Tax Certificate (Spain)

Hi,
One of the requirements in the project I am working at the moment is to generate the Withholding Tax Certificate and I can find out the way of generating the print out. The country where the report needs to be generated is Spain. Could anyone give me a hand? since I cannot find a standard form for this.. Do I have to generate a new form copying from an existing one? Is the WH Tax Certificate generated from the tr. S_PL0_09000447 and then this calls the form generated for this report?
Thanks and regards in advance.
F.

Hi
Symptom
Your company code is in Spain and you work with classic withholding tax.
This note is designed to help during the changeover from classic to extended withholding tax for Spain.
Other terms
Withholding tax, QSSKZ, customer, vendor, withholding tax changeover, withholding tax migration, WTMG, WTMIGRATION, classic withholding tax, QST, extended withholding tax, Spain
Reason and Prerequisites
The changeover from classic to extended withholding tax must be performed using a conversion tool (Transaction WTMG).
Solution
Since Release 40B, the extended withholding tax function has been available in the standard system. By changing to the extended withholding tax, it makes using withholding tax on the debit side possible. In addition it is possible to post different withholding tax categories in a document at the same time. You can find more information on the extended withholding tax function in the SAP Library.
It is only possible to change from classic withholding tax to extended withholding tax using a conversion tool.
On no account should you activate the extended withholding tax in your system without using this tool if you have been using the classic withholding tax up to now.
Information concerning the changeover and the changeover tool can be found in Note 337267.
This note describes the creation of the withholding tax types and withholding tax codes and the use of the changeover tool for the country Spain.
However this note does not replace the documentation concerning the withholding tax changeover in the SAP Library (or the Word file during the transport from the SAPServ according to Note 186989), it simply provides additional information for Spain!
1. The following is a list of the withholding tax codes used in classic withholding tax. If the withholding tax codes you are using are called differently, you must take that into account later during the assignment of the withholding tax codes of classic withholding tax to the type/code combinations of extended withholding tax.
Probably the specified withholding tax codes do not agree with those which have you used in classic withholding tax. Since the specified codes are the official ones, first change your Customizing for classic withholding tax such that the specified withholding tax codes are defined for the different withholding tax codes.
2. Define the official withholding tax keys for the country ES in extended withholding tax under Financial Accounting Global Settings --> Withholding Tax --> Extended Withholding Tax --> Basic Settings --> Define Official Withholding Tax Codes:
3. Create the following withholding tax types of extended withholding tax for the country ES:
To create the withholding tax types, select Financial Accounting Global Settings --> Withholding Tax --> Extended Withholding Tax --> Calculation --> Withholding Tax Type --> Define Withholding Tax Type for Payment Posting in the Implementation Guide for Financial Accounting.
Select 'Net amount' in the "Calculation/Base amount" screen area in each case
Select 'W/tax comm. round' in the "Calculation/Rounding rule" screen area in each case
Select 'C/disc pre W/tx' in the "Calculation/Cash discount" screen area in each case
Set the 'Post w/tax amount' indicator in the "Calculation" screen area in each case
Select 'No accumulation' in the "Accumulation type" screen area in each case
Set the 'W/tax base manual', 'Manual w/tax amnt' and 'No cert. numbering' indicators in the "Control data" screen area in each case
Select 'W/tax code level' in the "Define minimum/maximum amounts", "Base amount" screen area in each case
Select 'W/tax code level' in the "Define minimum/maximum amounts", "Withholding tax amount" screen area in each case
Select 'No centr. invoice' in the "Central invoice" screen area in each case
Select 'Minimum Check at Item Level' in the "Minimum Check" screen area or 'No min. base check at item level' in the "Minimum base check" screen area in each case
All the other fields in the withholding tax type must be left unselected.
4. Create the withholding tax codes belonging to the withholding tax types:
To create the withholding tax codes, select Financial Accounting Global Settings --> Withholding Tax --> Extended Withholding Tax --> Calculation --> Withholding Tax Codes --> Define Withholding Tax Codes in the Implementation Guide for Financial Accounting.
Copy the names from the first list (under point 1).
Enter the official withholding tax key (Off. W/Tax Key) in the corresponding field as specified above.
Select the same percentage as defined in the corresponding withholding tax code of classic withholding tax under 'Calculation of the withholding tax base amount' for the percentage subject to tax in the "Base amount" screen area. (the percentage should agree with the above-mentioned percentage subject to tax (%sub.to tax)).
Select the same rate as defined in the corresponding withholding tax code of classic withholding tax under 'Calculation of withholding tax' for the withholding tax rate in the "Calculation" screen area (The rate should agree with the above-mentioned withholding tax rate (WT rate)).
Set value '1' for the Post.indic. in the "Postings" screen area
Select the corresponding settings as in the corresponding withholding tax code of classic withholding tax in the "Reporting information" screen area (The settings should agree with the above-mentioned specifications for region and income type (Inc.type)).
All the other fields in the withholding tax code must remain empty.
Create a withholding tax conversion run:
Call Transaction WTMG
Choose 'Create'
Assign a name to the conversion run
Select change 'Choose Company Codes' and enter the company code to be converted and country 'ES'
Select change 'Type/Code Assignment' and assign the respective new withholding tax types and withholding tax codes of extended withholding tax to the withholding tax codes of classic withholding tax defined for country 'ES':
Execute the 'Analysis'
Select the option 'Several withholding tax types possible per vendor' under 'Master data settings'
Carry out the conversion steps (to start with in the test run).
After the withholding tax changeover has occurred, create the following recipient codes for the country ES to complete Customizing:
To create the recipient code, select Financial Accounting Global Settings --> Withholding Tax --> Extended Withholding Tax --> Reporting --> Define Recipient Code for Extended Withholding Tax in the Implementation Guide for Financial Accounting.

Withholding Tax for Document Generation Wizard

Hi,
                          I have defined Withholding tax for my customers.When I try to create the A/R Invoices through Doc.Generation Wizard,the system is giving the error message-'Withholding tax is missing.'But I am unable to assign any W/Holding tax in the delivery.Can somebody give suggestions?
               Thank u.
                Regards,
                Sekar

Hi Sekar,
I Reproduced the same scenario till delivery and used Doc. Gen wiz as target document as A/R Invoice it worked fine.
Settings BP and Item both we set to Witholiding tax Liable. The Invoice had withholdig tax amout added generated by the DGW.
Could you check in for the list of BP in DGW (Document generation wizard)
Business Partner --> Accounting tab --> Tax sub-tab --> WT taxes allowed and check if you have one WT checked.
Let meknow if this works.
Regards,
Rakesh

Loans Management - Withholding Tax on Interest - Product type 33A

Dear Experts,
I´m trying to config the withholding tax on interest per product type 33A General Loan Given. Do you know which is the correct flow type to use and how to config and link it in order to set the base amount related to the interest calculated amount?
In my design is always a quarterly calculation for Intercompany loans and, in special case, I need to apply the WHT to the calculated amount of the interest.
Example:
Interest invoice : Flow Type 0110 A_Interest debit pos. rec.
01     Customer Affiliate         1000
50     P&L Interest                 1000
Interest invoice with 10% WHT
01     Customer Affiliate           900
40     WHT 10%                       10
50     P&L Interest                 1000
Thanks in advance for any helpful advice you could provide me.
Best regards
Paolo

Hi Feng,
are you sure it will work also for SAP Banking Loans Management? I read the attached documentation of WHT for India and every call-out is related to TRM.
May you please confirm me which flow type of loans management is covering this sub-process?
Thanks and regards
Paolo

Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

Hi,
I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
I am not sure what is the reason for this. Can anybody help me sort out this Issue.
Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data Tab in the Invoice.
Regards,
Deepak.

Dear Praveen,
please check into IMG if You defined the WT type You are using for Your Comapny code:
IMG --> Assign Withholding Tax Types to Company Codes
I hope this helps.
Mauri

Vendor Open items upload- Withholding tax liable tick

Hi all
I have uploaded the Vendor open items. At the time of upload, Withholding tax was activated at the co code level. However, the liable to TDS tick was not checked. Now when I activate the liable tick and go to F-53 to pay the open items, I get an error of Items not activated due to Inconsistent Withholding tax. How do i resolve this error. I think there is a program which we need to execute to correct this. Can any1 help me with the program name?
Thxs in advance
Hrishi

RFWT0010 is a programme to run for Open items adjustment.
Let me know the result.
thanks
prabhakar

Withholding tax not able to view in FBL1N - Vendor Line Item report

Dear All,
The VI documents are posted in different vendors. The Tax code has been duly selected and tax was deducted at the time of posting the entry. When we generate the list of vendor line items using standard report FBL1N, we observe that only some of the VI documents in the output show the withholding tax amount in the respective column whereas in some of the VI documents, the withholding tax amount is appearing as zero even though the tax line item is available in the document (same can be seen in FB03).
Please let us know the possible cause for the same.
Regards,
Anand.Inguva

Dear,
by FBL1N is not possible to check the Extended WT
information due to the technical reasons explained into the note
number 363309.
Furthermore please be aware that by the report RFKQST00 and
RFIDYYWT You can have all the WT details.
I hope this helps You.
Mauri

How to clear line items with withholding tax manually

hi Experts,
i posted a vendor invoice with withholding tax and i made payment as well but not through f-58.
now i wanted to clear these two through f-44 but it gives the message withholding tax information ignored and didnt display the invoice as open item.
how do i clear both the trasactions
regards
suresh

hi Praisty,
thanks for the reply
i have a second opinion on your statement that no matter whatever tcode you use for payment it will clear the open item. Even in F-58, if u make partial payment it will not clear you open item. But i didnt use f-58 as i said earlier.
i used FBV1 for parking the document through which i entered the payment details...ofcourse it doesnt have the option for clearing the open items, cheque printing and it will not update your cheque register. i posted the parked document through FBV0. for all practical purposes, this is my payment document but it didnt clear my open item, in order to clear it i now used f-44.
regards
suresh

Withholding tax line items are not post

Hi,
I was configured all the steps for extended withholding tax up to Assign withholding tax to vendor master data
and the i am used to post an vendor invoice
given all required feild and press enrer and display the withhoding tax codes screen here also press enter button .... i entered all required field and go to simulation this posting i am getting only 2 line items
like for eg: --- Inventory Debit , Vendor Credit only
here my problem is i am not getting the all with holding tax line items
please hepl
Sree

Dear Sree,
if You defined the WT type at the payment time, the WT line items will be created at the payment time and not during the invoice posting.
Please check.
Mauri

Withholding Tax Calculation Error for Vendor Down Payment Clearing:Oct '09

Hi,
We are trying to incorporate the new Withholding Tax Structure w.e.f. 01-Oct-09.
There were 3 scenarios possible:
a. Invoice = Down Payment
b. Invoice < Down Payment
c. Invoice > Down Payment
While 1 & 2 were taken care of effectively, the third scenario did not work as expected. The scenario is as follows:
1. Down Payment (Date : 30/09/09)
Amt : Rs. 40000/-;
Withholding Tax @ 15% : Rs. 6000/- (40000 * 15%)
Surcharge @ 10% : Rs. 600/- (6000 * 10%)
Edu Cess @ 2% : Rs. 132 (Rs. 6600*2%)
Higher Edu Cess @ 1% : Rs. 66 (Rs. 6600*2%)
2. Invoice (Date : 02/09/09) - As per new TDS Rates
Amt : Rs. 50000/-
Withholding Tax @ 10% : Rs. 5000/- (50000 * 10%)
Surcharge : NIL
Edu Cess : NIL
Higher Edu Cess : NIL
3. DPC (Date : 02/09/09) - Reversal of TDS calculated in Down Payment (Step 1) above.
Issue:
While making J1INCHLN, amount is adjusted as Rs. -1000/- (hence zero) not payable.
Also, the Surcharge, Edu Cess & Higher Edu Cess are also getting reversed in DPC.
As suggested by SAP Note No. 1372734 - Handling of downpayment clearing scenarios after budget '09, the scenario does not seem to work.
Actual payable should be worked out as under:
Invoice : Rs. 50,000/-
DP : Rs. 40,000/-
Bal : Rs. 10,000/-
TDS @ 10% : Rs. 1,000/-
All TDS Challans, Certificates & Returns must reflect Rs. 1000/- in the Challan.
Require assistance.
Regards,
Kapil Tilwani

Hi Kapil,
The following needs to be taken care of -
The message controls settings as the note suggests must be set as W.
When entering the details the logic is Vendor Debit amount is Tax amount + 1
The Vendor credit line, the tax code has to be assigned with the advance amount (amount for which the challan has been created) as the tax base amount and the tax amount will be the extra liability that needs to be created.
In your example -
The tax amount will be - 2000 ( the debit at the time of downpayment clearing should have been 4000 instead of 6000)
Tax base amount - 40000 (Challan for this amount has already been made at the time of downpayment made)
The vendor Debit - 2001 (2000 + 1)
The vendor credit - 1
Note - Tax amount and base amount has to be made manually in the withholding Tax tab for the credit entry.
Please revert for any clarification.
Thanks and Regards,
Anit

Payment order are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below. It appears on F110 when I try to pay a vendor open item with extended withholding tax:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome

The payment method "Y" the option "payment order only" was marked?
For a withholding tax type with accumulation in a company code with extended withholding tax payment
methods that create only payment orders can´t be used. Payment orders can only be created only if there are
no tax types with accumulation involved in the paid items of the payment run.
The functionality extended withholding tax works fine for Brazil
however, you can´t use the payment order with this functionality.
Please, review your customizing for payment method 'Y" in transaction
FBZP.
Best regards,
Leonardo Vedovelli
FI Support Engineer
SAP Active Global Support

Withholding Tax by Line Item (not by vendor)

Hi,
Thereu2019s been more than 1 occasion where clients request for withholding tax at line items (purchase equipment and service in 1 invoice. Equipment no withholding tax but service has withholding tax). However, as far as I know, the withholding tax is applicable by vendor and not by line item of the vendor. Is there any workaround on this?
Regards,
Cheah

If i understand correctly, you have prepared PO for material plus service, service attracts WHT
you could prepare two different vendors - one for material, one for service - even though the vendor is same, and maintain WHT only in service vendor.
under PO there is condition types for service, there you can enter this second vendor who is providing service.
i think this way you issue should get resolved.
Pl share how to finally got thru it.
Thanks
Sanjay

In vendor line item not showing withholding tax amount and withholding base

Hi Gurus,
When i am using T,code FBL1n for details clear item,in line item doesn't showing withholding tax amount and withholding base amount for some vendors when i am using FB03 there showing tax amount and base amount,in option is there.plz help me,its very urgent.
Thanks & regards,
Dharma.

Im not sure but may be its because in the config. of 1099 Withholding tax we usually say that the with holding is to be posted only after payment of the open items.
So, lets try this. Look at if the documents which are showing withhld tax in FBL1N if they are paid or not.
this would give us some help or hopefully the answer..
regards

Calculate Withholding taxes for VEndor Invoices using ABAP program.

Hi All,
I have to upload Vendor Invoices using FB60/Fb01 tcodes. I am able to post the Invoices using FB01/Fb60
but I have to calculate extended withholding taxes also using this program for the Invoices.
Is it possible to upload vendor Invoices and calculate withholding taxes using Program?
If yes,
Does anyone has any idea how do you calculate extended withholding taxes using any BAPI's?
I have used these two BAPI's
BAPI_ACC_DOCUMENT_POST
BAPI_acc_invoice_receipt_post
they are working fine but without withholding tax.
This is a requirement for country India.
Regards,
Sushil

Hi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
     extract the vendor types in to itab Table1New.
     Select the vendor & types from Table2 by using the for all entries option (better performance).
     loop at Table1New
          check in Table2:
               if the unique key is vendor no: check all fields for the vendor type from Table1New
               if the unique key combo is vendor no & type: check by using a read table.
          If not found => add entry to Table2
     endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou

Sub: Withholding tax

Similar Messages

Maybe you are looking for