Subcontracting accounting entry
hello gurus
i have accounting problem regarding subcontracting process in gr accounting entry are created like that
pk g/l ac description amount
89 24350001 SEMI FINISH STOC A/C 10,000.00
96 13110100 GR/IR-Clearing - Ext 1,200.00-
91 50000050 CHANGE IN STOCK 10,000.00-
86 50002530 JOB WORK. CHARGE 1,200.00
99 24340000 RAW MATERIALS STK 4,800.00-
81 50000000 CONSUMPTION RAW 4,800.00
99 24340000 RAW MATERIALS STK 4,800.00-
81 50000000 CONSUMPTION RAW 4,800.00
my query is that when thea/c no 50000050( third posting line)
will be debited .is there is any process in mm or pp due to which this a/c will be debited.if yes please tell which process.thanks
regards
k.chhikara
Hi Krishnan,
As per the details given by u, 50000050 will be a P&L account and 24350001 will be a balance sheet account.
U can get more help from ur FI consultant
Similar Messages
-
Subcontracting accounting entries in case purchse accout mgt. activated
Hi Friends,
We have activated Purchase accout management. In this case is there any changes in accounting entries in case of SUb Contra`cting process ?
I found it difficult to map in this case ? Does any one worked in this ?
Regards,
Sai KrihshnaHi Saikrishna,
Whenever you are activating purchase a/c mgmt your accounts will be hitted like this :
Inventory A/c + db
- cr Purchase Account
GR/IR Aclraeing -cr
+db Purchase offset account
This is normal entry,
But in case of subcontracting :"
Inventory a/c +db BSX
GR/R Clr -cr WRX
Change in Stk A/c -cr BRV
Subcontracting chrgs +db FRL
RM A/c -Cr BSX
RM a/c consumed +db GBB
Same entries are passing on.
Pls in doubt revert
Thanks and regards
Gitesh
Edited by: gitesh mahamuni on Sep 8, 2009 7:43 AM -
Subcontracting accounting entries at the time of GR reversal
Hello,
In Subcontracting procedure, when i required the one finsihed product,
then i send a two components for him 1)A1 2)A2
Finished material and materials A1 and A2 are mainatained in Standard price.
Through the MB1B i send the material provided to vendor next i did MIGO
in that case the Accounting entries are hitting are
1)Stock Account hitting by STD price of the component at time of posting.
2)Balance effect goes to Consumtion of raw material
is it correct?
At time of Reversal of the GR doc is it take the STD price of the componentsor avarage cummulative price based on the prvious std price.
Please guide me at the time of reversal how the accounting entries are hitting and at what base, the how PPV is calculated,
and if in between any price change then what are the accounting entries?
if anybody give me answer , iam greatful to him
Regards
sapmanIam facing this problem from last one month, nobody is giving the hints
frien'd update please -
Account entries with excise & without excise for Subcontracting process.
Please let me know the Account entries with excise & without excise for Subcontracting process.
Regards
PBRhi..
check these links...
Accounting entries for subcontracting
and
Subcontracting process with excise duty??
It may help u..
Thanks -
Subcontracting accounting document entry
hello gurus
i have accounting problem regarding subcontracting process in gr accounting entry are created like that
pk g/l ac description amount
89 24350001 SEMI FINISH STOC A/C 10,000.00
96 13110100 GR/IR-Clearing - Ext 1,200.00-
91 50000050 CHANGE IN STOCK 10,000.00-
86 50002530 JOB WORK. CHARGE 1,200.00
99 24340000 RAW MATERIALS STK 4,800.00-
81 50000000 CONSUMPTION RAW 4,800.00
99 24340000 RAW MATERIALS STK 4,800.00-
81 50000000 CONSUMPTION RAW 4,800.00
my query is that when thea/c no 50000050( third posting line)
will be debited .is there is any process in mm or pp due to which this a/c will be debited.if yes please tell which process.thanks
regards
k.chhikaraHi
Module-wise detail given below:
Accounting :- In transaction OBYC for key BSV the change in stock assignment done for Valuation class.
MM- Material is created with special procument key as subcontracting in MRP view 2
PP - BOM is create for the same.
If the above answer is helpful kindly assign points
Thanks & Regards -
Sub Contracting GR Accounting Entries
Hi All,
I am posting GR for sub contracting PO and found the following entries in the accounting document of GR:
1. Stock Acct. of Finished product
2. GR/ IR Clearing Acct
3. Sub Contracting Charges
4. Change in Sub Contracting Stock
However, I did not see the accounting entries for:
1. Stock Acct. of Spare parts
2. Consumption Acct
Please suggest how to corrent the same?
Rgds,
KKHi,
Check in GR Document whether line item for component consumption exists with MvT 543, if yes then check whether MAP of material is ZERO.
If line with MvT 543 doesn't exist then you might have forgot to activate "Item OK" indicator for component line item during GR in MIGO. Confirm this by checking componet stock in MMBE for special Stock "O" for Vendor. Just cancel the GR Document and Post GR again.
During GR against Subcontracting PO (In MIGO), following A/c Entry should get posted;
BSX Assembly Stock A/c Dr 5000.00
BSV Change in Stock A/c Cr 5000.00
FRL Subcontracting Charges A/c Dr 1000.00
WRX GR/IR Clearing A/c Cr 1000.00
GBB-VBO Component Consumption A/c Dr 4000.00
BSX Component Stock A/c Cr 4000.00 -
Dear,
Can any one give me, what are the accounting entries will create while doing cin related documents. i.e when i do migo, miro, excise invoice and return delviery, utilization... i.e which a/c makes dr/cr,. pls provide in detail...Accounting entry in procurement
~ For Domestic Procurement of Raw Material
During GR
Material Stock Dr.
GR/IR clearing Cr.
During Excise Invoice Credit
Cenvat Account Dr.
Cenvat Clearing Cr.
During Invoice Verification
Cenvat Clearing Dr.
GR/IR Clearing Dr.
Vendor Payable Cr.
For Domestic proceurement of Capital Goods
During GR
Material Stock Dr.
GR/IR clearing Cr.
During Excise Invoice Credit
Cenvat Account Dr. (50%)
Cenvat On-hold Dr. (50%)
Cenvat Clearing Cr.
During Invoice Verification
Cenvat Clearing Dr.
GR/IR Clearing Dr.
Vendor Payable Cr
Subsequent of Capital Goods
Cenvat Account Dr. (50%)
Cenvat On-hold Cr. (50%)
For Import Procurement of Raw Material
During Customs Duty Clearing invoice
Custom Clearing Dr.
Custom Payable Cr.
During GR
Material Stock Dr.
GR/IR clearing Cr.
During Excise Invoice Credit
Cenvat Account Dr.
Custom Clearing Cr.
During Invoice Verification
GR/IR Clearing Dr.
Vendor Payable Cr.
For Excise Duty Credit of Raw Material without PO
Cenvat Account Dr.
Cenvat Clearing Cr.
For Excise Duty Reversal through Excise JV
Cenvat Clearing Dr.
Cenvat Account Cr.
Accounting entry when the goods are issued through MM and excise invoice is created (J1IS & J1IV)
During Excise Invoice Creation
Cenvat Suspense Account Dr.
Cenvat payable Cr.
For TR6C Challan
PLA Account Dr.
PLA on hold Account Cr.
During Fortnightly Utilization
Cenvat payable Dr.
Cenvat Account Cr.
PLA Account Cr.
Note: Cenvat Suspense Account should be cleared apprpiately using FI JV's.
Accounting entry in subcontracting reversal / Recredit
For Subcontracting Challan Reversal
Cenvat Reversal Dr.
Cenvat Account Cr.
For Subcontracting Challan Recredit
Cenvat Account Dr.
Cenvat Reversal Cr.
Accounting entry in SD
For Factory Sale
During Billing Document
Customer Account Dr.
Sales Account Cr.
Cenvat Suspense Account Cr.
During Excise Invoice Creation
Cenvat Suspense Account Dr.
Cenvat payable Cr.
For TR6C Challan
PLA Account Dr.
PLA on hold Account Cr.
During Fortnightly Utilization
Cenvat payable Dr.
Cenvat Account Cr.
PLA Account Cr. For Stock Transfer through SD
No Accounting entries for Performa Billing Document
During Excise Invoice Creation
Cenvat Suspense Account Dr.
Cenvat payable Cr.
For TR6C Challan
PLA Account Dr.
PLA on hold Account Cr.
During Fortnightly Utilization
Cenvat payable Dr.
Cenvat Account Cr.
PLA Account Cr.
Note: Cenvat Suspense Account should be cleared apprpiately using FI JV's.
Edited by: vijay shukla on Aug 28, 2008 9:50 AM -
Subcontracting Account Postings
Hi,
Can any body explain me what are the posting happen during Subcontracting cycle, After GI and after GR (101 and 543).
What might be the difference if we used price control V or S.Accounting Entries for a Subcontract Order
You check an invoice for a subcontract order in the same way as for a standard purchase order.
Additional account postings do, however, occur if a price variance has occurred. These postings are shown in the following example :-
Postings for a Subcontract Order
In this example, a subcontract order was created for the end product "ASSEM-1". The components COMP-1 and COMP-2 were provided to the subcontractor.
Purchase Order
50 pieces of material ASSEM-1 were ordered. The subcontract price is $10/piece (total value = $500).
The following components were provided to the subcontractor:
15 kg of the component COMP-1
5 pcs of the component COMP-2
Good Receipt
The subcontractor delivers 50 pieces of material ASSEM-1.
At goods receipt a consumption posting for the components provided to the subcontractor is automatically made. It is valuated at the price from the material master record, for example:
15 kg of the component COMP-1 at $20/kg = $300
5 pcs of the component COMP-2 at $30/pc = $150
The goods receipt is valuated with $950. This is calculated as follows:
the subcontract price (50 pcs * $10/pc = $500) and
value of the components ($300 + $150).
Invoice Receipt
The vendor (subcontractor) sends you an invoice for the subcontract work. However, the price is $10.50/pc. The invoice is, therefore, 50 pieces ASSEM-1 * $10.50/pc = $525.
Posting Schema for Moving Average Price Control
In this example, the following postings are made at goods receipt and invoice receipt, if the material (end product) is valuated at moving average price:
Postings
At goods receipt
At invoice receipt
Vendor account
525 -
GR/IR clearing account
500 -
500 +
External service account
500 +
25 +
Stock account: end product
950 +
25 +
Stock change
950 -
25 -
Stock account: comp.
450 -
Consumption account
450 +
Posting Schema for Standard Price Control Without Price Differences
For materials (end products) with standard price control also note that no price differences are posted if the total of the external service value (for example, $500) plus the "material to be provided" value (for example, $450) varies from the value at standard price (for example, $1000). Posting of a price difference is not required because each posting line has its own
offsetting entry.
No posting lines are created on the stock account or on the stock change account when an invoice is received.
In the above example, the following postings are made for a material with a standard price of $20:
Postings
At goods receipt
At invoice receipt
Vendor account
525 -
GR/IR clearing account
500 -
500 +
External service account
500 +
25 +
Stock account: end product
1000 +
Stock change
1000 -
Stock account: comp.
450 -
Consumption account
450 +
Posting Schema for Standard Price Control With Price Differences.
However, if you wish to generate a price difference posting in those cases where the manufactured material is managed at standard price and the standard price varies from the receipt value (externally performed service + value of components + delivery costs), you can configure this in the Customizing system of Inventory Management.
In the above example, the following postings (including price differences) are made for a material with a standard price of $20:
Postings
At goods receipt
At invoice receipt
Vendor account
525 -
GR/IR clearing account
500 -
500 +
External service account
500 +
25 +
Stock account: end product
1000 +
Stock change
950 -
Price difference
50 +
Stock account: comp.
450 -
Consumption account
450 +
Regards,
Ashok -
MM subcontracting Account determination
Hi All,
Any one knows MM subcontracting Account determination in OBYC?
any help is appreciated..
Thanks,
RauHi,
Hi,
For Account Determination 5 major characteru2019s are as follow:
1.Chart of Account,
2.Valuation Class,
3.Transaction Event Key,
4.Valuation Grouping Code,
5.Account Grouping Code/Account Modifier.
Configuration of Automatic Account Determination with T.Code are as follow:
1.OMSK: valuation Class with Account category reference,
2.OMWM: Active Valuation Grouping Code,
3.OMWN: Active Movement type with G/L account,
4.OMWD: Active Valuation Area,
5.OMWB: Active Chart of account,Valuation Grouping Code,Account Grouping Code,Valuation Class and G/L acocounts
In OMWB or OBYC
Click TE key and enter Chart of account and then save the Roles 1st for
1.Debit/Credit
2.General modification
3.Valuation Modif
4.Vakuation class
And then enter respective critetia for that TE key and save.
If assignment(Chart of account,Valuation Grouping Code,Account Grouping Code,Valuation Class and G/L acocounts
are correct and u would not face any problems in G/GI/IV.
The TE keys are:
Expense/revenue from consumption of consignment material (AKO)
This transaction is used in Inventory Management in the case of
withdrawals from consignment stock or when consignment stock is
transferred to own stock if the material is subject to standard
price control and the consignment price differs from the standard
price.
u2022 Expenditure/income from transfer posting (AUM)
This transaction is used for transfer postings from one material to
another if the complete value of the issuing material cannot be
posted to the value of the receiving material. This applies both to
materials with standard price control and to materials with moving
average price control. Price differences can arise for materials
with moving average price if stock levels are negative and the stock
value becomes unrealistic as a result of the posting. Transaction
AUM can be used irrespective of whether the transfer posting
involves a transfer between plants. The expenditure/income is added
to the receiving material.
u2022 Provisions for subsequent (end-of-period rebate) settlement (BO1)
If you use the "subsequent settlement" function with regard to
conditions (e.g. for period-end volume-based rebates), provisions
for accrued income are set up when goods receipts are recorded
against purchase orders if this is defined for the condition type.
u2022 Income from subsequent settlement (BO2)
The rebate income generated in the course of "subsequent settlement"
(end-of-period rebate settlement) is posted via this transaction.
u2022 Income from subsequent settlement after actual settlement (BO3)
If a goods receipt occurs after settlement accounting has been
effected for a rebate arrangement, no further provisions for accrued
rebate income can be managed by the "subsequent settlement"
facility. No postings should be made to the account normally used
for such provisions. As an alternative, you can use this transaction
to post provisions for accrued rebate income to a separate account
in cases such as the one described.
u2022 Change in stock (BSV)
Changes in stocks are posted in Inventory Management at the time
goods receipts are recorded or subsequent adjustments made with
regard to subcontract orders.
If the account assigned here is defined as a cost element, you must
specify a preliminary account assignment for the account in the
table of automatic account assignment specification (Customizing for
Controlling) in order to be able to post goods receipts against
subcontract orders. In the standard system, cost center SC-1 is
defined for this purpose.
Stock posting (BSX)
This transaction is used for all postings to stock accounts. Such
postings are effected, for example:
In inventory management in the case of goods receipts to own
stock and goods issues from own stock
In invoice verification, if price differences occur in
connection with incoming invoices for materials valuated at
moving average price and there is adequate stock coverage
In order settlement, if the order is assigned to a material with
moving average price and the actual costs at the time of
settlement vary from the actual costs at the time of goods
receipt
Because this transaction is dependent on the valuation class, it is
possible to manage materials with different valuation classes in
separate stock accounts.
Caution :
Take care to ensure that:
A stock account is not used for any transaction other than BSX
Postings are not made to the account manually
The account is not changed in the productive system before all
stock has been booked out of it
Otherwise differences would arise between the total stock value of
the material master records and the balance on the stock account.
Revaluation of "other" consumptions (COC)
This transaction/event key is only relevant to Brazil. It is used if
a revaluation report is used for company codes in Brazil.
The revaluation report uses the actual prices determined by the
material ledger/actual costing to:
Revaluate costs on the basis of actual prices
Post the price differences arising from "other" consumptions
(e.g. consumption to cost center) to a collective account
This transaction/event key is needed to post the price differences.
The account specified here is posted with the price differences for
"other" consumptions.
o documentation currently available.
Small differences, Materials Management (DIF)
This transaction is used in Invoice Verification if you define a
tolerance for minor differences and the balance of an invoice does
not exceed the tolerance.
Purchase account(EIN), purchase offsetting account (EKG), freight
purchase account (FRE)
These transactions are used only if Purchase Account Management is
active in the company code.
Freight clearing (FR1), provision for freight charges (FR2), customs
duty clearing (FR3), provision for customs duty (FR4)
These transactions are used to post delivery costs (incidental
procurement costs) in the case of goods receipts against purchase
orders and incoming invoices. Which transaction is used for which
delivery costs depends on the condition types defined in the
purchase order.
You can also enter your own transactions for delivery costs in
condition types.
External service (FRL)
The transaction is used for goods and invoice receipts in connection
with subcontract orders.
If the account assigned here is defined as a cost element, you must
specify a preliminary account assignment for the account in the
table of automatic account assignment specification (Customizing for
Controlling) in order to be able to post goods receipts against
subcontract orders. In the standard system, cost center SC-1 is
defined for this purpose.
External service, delivery costs (FRN)
This transaction is used for delivery costs (incidental costs of
procurement) in connection with subcontract orders.
If the account assigned here is defined as a cost element, you must
Offsetting entry for stock posting (GBB)
Offsetting entries for stock postings are used in Inventory
Management. They are dependent on the account grouping to which each
movement type is assigned. The following account groupings are
defined in the standard system:
AUA: for order settlement
AUF: for goods receipts for orders (without account
assignment)
and for order settlement if AUA is not maintained
AUI: Subsequent adjustment of actual price from cost center
directly
to material (with account assignment)
BSA: for initial entry of stock balances
INV: for expenditure/income from inventory differences
VAX: for goods issues for sales orders without
account assignment object (the account is not a cost
element)
VAY: for goods issues for sales orders with
account assignment object (account is a cost element)
VBO: for consumption from stock of material provided to
vendor
VBR: for internal goods issues (for example, for cost
center)
VKA: for sales order account assignment
(for example, for individual purchase order)
VKP: for project account assignment (for example, for
individual PO)
VNG: for scrapping/destruction
VQP: for sample withdrawals without account assignment
VQY: for sample withdrawals with account assignment
ZOB: for goods receipts without purchase orders (mvt type
501)
ZOF: for goods receipts without production orders
(mvt types 521 and 531)
You can also define your own account groupings. If you intend to
post goods issues for cost centers (mvt type 201) and goods issues
for orders (mvt type 261) to separate consumption accounts, you can
assign the account grouping ZZZ to movement type 201 and account
grouping YYY to movement type 261.
Caution
If you use goods receipts without a purchase order in your system
(movement type 501), you have to check to which accounts the account
groupings are assigned ZOB
If you expect invoices for the goods receipts, and these invoices
can only be posted in Accounting, you can enter a clearing account
(similar to a GR/IR clearing account though without open item
management), which is cleared in Accounting when you post the vendor
invoice.
Note that the goods movement is valuated with the valuation price of
the material if no external amount has been entered.
As no account assignment has been entered in the standard system,
the assigned account is not defined as a cost element. If you assign
a cost element, you have to enter an account assignment via the
field selection or maintain an automatic account assignment for the
cost element.
Purchase order with account assignment (KBS)
You cannot assign this transaction/event key to an account. It means
that the account assignment is adopted from the purchase order and
is used for the purpose of determining the posting keys for the
goods receipt.
Exchange rate differences in the case of open items (KDM)
Exchange rate differences in the case of open items arise when an
invoice relating to a purchase order is posted with a different
exchange rate to that of the goods receipt and the material cannot
be debited or credited due to standard price control or stock
undercoverage/shortage.
Differences due to exchange rate rounding, Materials Management
(KDR)
An exchange rate rounding difference can arise in the case of an
invoice made out in a foreign currency. If a difference arises when
the posting lines are translated into local currency (as a result of
rounding), the system automatically generates a posting line for
this rounding difference.
Consignment liabilities (KON)
Consignment liabilities arise in the case of withdrawals from
consignment stock or from a pipeline or when consignment stock is
transferred to own stock.
Depending on the settings for the posting rules for the
transaction/event key KON, it is possible to work with or without
account modification. If you work with account modification, the
following modifications are available in the standard system:
None for consignment liabilities
PIP for pipeline liabilities
Offsetting entry for price differences in cost object hierarchies
(KTR)
The contra entry for price difference postings (transaction PRK)
arising through settlement via material account determination is
carried out with transaction KTR.
Price differences (PRD)
Price differences arise for materials valuated at standard price in
the case of all movements and invoices with a value that differs
from the standard price. Examples: goods receipts against purchase
orders (if the PO price differs from the standard pricedardpreis),
goods issues in respect of which an external amount is entered,
invoices (if the invoice price differs from the PO price and the
standard price).
Price differences can also arise in the case of materials with
moving average price if there is not enough stock to cover the
invoiced quantity. In the case of goods movements in the negative
range, the moving average price is not changed. Instead, any price
differences arising are posted to a price difference account.
Depending on the settings for the posting rules for
transaction/event key PRD, it is possible to work with or without
account modification. If you use account modification, the following
modifications are available in the standard system:
None for goods and invoice receipts against purchase orders
PRF for goods receipts against production orders and
order settlement
PRA for goods issues and other movements
PRU for transfer postings (price differences in the case
of external amounts)
Provision for delivery costs (RUE)
Provisions are created for accrued delivery costs if a condition
type for provisions is entered in the purchase order. They must be
cleared manually at the time of invoice verification.
Taxes in case of transfer posting GI/GR (TXO)
This transaction/event key is only relevant to Brazil (nota fiscal).
Revenue/expense from revaluation (UMB)
This transaction/event key is used both in Inventory Management and
in Invoice Verification if the standard price of a material has been
changed and a movement or an invoice is posted to the previous
period (at the previous price).
Unplanned delivery costs (UPF)
Unplanned delivery costs are delivery costs (incidental procurement
costs) that were not planned in a purchase order (e.g. freight,
customs duty). In the SAP posting transaction in Logistics Invoice
Verification, instead of distributing these unplanned delivery costs
among all invoice items as hitherto, you have the option of posting
them to a special account. A separate tax code can be used for this
account.
Input tax, Purchasing (VST)
Transaction/event key for tax account determination within the
"subsequent settlement" facility for debit-side settlement types.
The key is needed in the settlement schema for tax conditions.
Goods issue, revaluation (inflation) (WGI)
This transaction/event key is used if already-posted goods issues
have to be revaluated following the determination of a new market
price within the framework of inflation handling.
Goods receipt, revaluation (inflation) (WGR)
This transaction/event key is used if already-effected transfer
postings have to be revaluated following the determination of a new
market price within the framework of inflation handling. This
transaction is used for the receiving plant, whereas transaction WGI
(goods receipt, revaluation (inflation)) is used for the plant at
which the goods are issued.
GR/IR clearing (WRX)
Postings to the GR/IR clearing account occur in the case of goods
and invoice receipts against purchase orders. For more on the GR/IR
clearing account, refer to the SAP Library (documentation MM
Material Valuation).
Caution
You must set the Balances in local currency only indicator for the
GR/IR clearing account to enable the open items to be cleared. For
more on this topic, see the field documentation.
Thanks,
Raja -
Accounting entries for Scontracting GR
HI,
I want to know the accounting entries details while doing a GR from a subcontracting vendor.
My subcontractor vendor provides a semi finished material ZZZ
Input material to the subcontractor vendor is Material A and B each one.
The cost of Material A is Rs. 5 and for B is Rs. 10.
The subcontrating charges is Rs. 2
Please provide details.
Regards,
R. Dillibabu.check this one......will expalin every thing
http://www.sap-img.com/mm004.htm
Purchase Order
50 pieces of material ASSEM-1 were ordered. The subcontract price is $10/piece (total value = $500).
The following components were provided to the subcontractor:
15 kg of the component COMP-1
5 pcs of the component COMP-2
Good Receipt
The subcontractor delivers 50 pieces of material ASSEM-1.
At goods receipt a consumption posting for the components provided to the subcontractor is automatically made. It is valuated at the price from the material master record, for example:
15 kg of the component COMP-1 at $20/kg = $300
5 pcs of the component COMP-2 at $30/pc = $150
The goods receipt is valuated with $950. This is calculated as follows:
the subcontract price (50 pcs * $10/pc = $500) and
value of the components ($300 + $150).
Invoice Receipt
The vendor (subcontractor) sends you an invoice for the subcontract work. However, the price is $10.50/pc. The invoice is, therefore, 50 pieces ASSEM-1 * $10.50/pc = $525.
Posting Schema for Moving Average Price Control
In this example, the following postings are made at goods receipt and invoice receipt, if the material (end product) is valuated at moving average price:
Postings
At goods receipt
At invoice receipt
Vendor account
525 -
GR/IR clearing account
500 -
500 +
External service account
500 +
25 +
Stock account: end product
950 +
25 +
Stock change
950 -
25 -
Stock account: comp.
450 -
Consumption account
450 + -
Hi
Can you please let me what are the account entries will hit .. while configure the below process
1) Subcontracting
2)Park Invoice
3)Asset procurement
4)3rd party vendor
5)master data
6)vendor data
7)STO
8) release procedure
9)material returns,Scrapping
10)consumable procurement
Can you please let me know .. thanks
Note : Please search forum before posting,Go through forum rules
Edited by: Jeyakanthan A on May 26, 2011 10:33 AMThxxx BSR
We may configure the excise collection in two ways.
1. If we configure cenvat suspense while doing billing document, the same suspense account should be debited while excise invoice generation.
2. If we configure ED recovered a/c while billing document, excise duty(expenses a/c) to be configured to offset while creating excise invoice.
Either way you can follow.
would u pl clarify when should i go for 1 way & when 2???????????. & why there r these two ways?????????
Thxxx once again -
Accounting Entry getting passed in case of Make to Order Scenario
Hi Experts,
In Make to Order scenario, as per my knowledge, when the goods is recieved from Production Order the Accounting entry gets passed is Inventory A/c Debit and Cost of Goods Produced Credit.
But how is Cost of Goods Produced, which is an expense, gets crebited? I am confused, because the above entry will create a credit balance to an expense account. Can anybody clarify this please?
Thanks and Regards,
Sameer JoshiThanks for the reply.
Do you mean that at the time of PGI, when the entry is posted to COGS, the amount of COP will also get transferred to COGS and then the whole amount will be posted at PGI?
Thanks and Regards,
Sameer -
Accounting Entries hit in Third party Sales Process
Hi,
Can anybody tell which accounting entries are hit when we create the following entries in third party sales process
1.When Sales Order is created.
2.When PR is Created
3.When ME21N is done
4.MIGO
5.MIRO
please provide your valuable suggestion..
Thanks...Hi,
1. When Sales Order is created.
No FI Entry
2. When PR is Created
No FI Entry
3. When ME21N is done
No FI Entry
4. MIGO
(GBB-VAY) COGS - 3rd Party A/c - Dr
(WRX) GR/IR Clearing A/c - Cr
5. MIRO
Vendor Account - Cr
GR/IR Clearing A/c - Dr
6. VF01
Customer Account - Dr
Sales Revenue A/c - Cr -
GR/IR Revaluation Accounting Entries
I need the related accounting entries for eg. I assume at goods receipt, the foreign denominated PO would be received and recorded in local currency at the current u201Cspotu201D exchange rate loaded into the system. My questions are:
1) Is the GR/IR revalued at each period end for changes in the balance sheet rate of foreign denominated items?
2) What value is relieved when the Invoice Receipt is matched to the GR/IR item u2013 the original goods receipt amount, the revalued amount, or something different?Hi,
1) Yes, the GR/IR can be revalued at each period end for changes in the balance sheet rate of foreign denominated items.
2) While clearing the GR/IR account the clearing currency can be defined, so the clearing can happen at foreign currency also. The original amount is compared for GR and IR.
Regards,
Gaurav -
While "Invoice Cancelling- Accounting entry not effected in Trial balance"
Dear All,
Any one knows this please revert back.this Issue is very urgent (We have to Close the Periods)
Issue: While "Invoice Cancelling- Accounting entry not effected in Trial balance"
Invoice which is cancelled and accounting events for Invoice & Cancellation is taken place, but the entry for cancellation is not appearing in the GL Hence the reversal effect of expense is not seen.
I can able to see the Reversal Entry in Payables > Reports > View Accounting A
Here > Tools > View Accounting Events > View Journal Entries > Show Addtional Information > Transfer to GL Status is "No" after that i have Run the Transfer Journal Entries to GL even its not appearing in GL and not transfer to GL.
@Have to Resolve this as soon as possilble, plz any one can lets guide me
Reagrds,
senthilPlz Update this asap.....
Maybe you are looking for
-
Error while attempting to use the CSSFormatResolver Class in Flash CS4
Hello, While trying to work with a revised version of the CSSFormatResolver class (created by timoisalive and posted on this thread) the compiler threw the following error: 1061: Call to a possibly undefined method getChildAtIndex through a reference
-
Where is the download for Acrobat X Pro?
I have bought the creative cloud 6 standart and i can not find a download for Acrobat X Pro. I have downloaded the trial for Acrobrat XI Pro, but my Serial number doesnt work there. What should i do? Thanks, Kat
-
Register 12 VerifyError exception when compiling jsp with that jsp tag!
Hi everybody, We implemented a tag which is charged with a simple task like just "out.println"s, on production with WL5.1 SP11,jdk1.2. Then we got java.lang.VerifyError exception which is also denoted at Giusep
-
Problem to update my payment method
Hi. I'm a brazilian customer, and everything was working perfectly until my credit card holder blocked for security reason. Now it is working fine, but the Creative cloud service still showing the message that my subscription has a problem to verify
-
Anybody purchased a MacBook Air between June2012 and June 2013. Possible faulty drives being reported. 64gb and 128 drive