SUBMIT RFGLBALANCE WITH selection criteria, then How to get resulted itab?

Hi Experts,
Am looking to develop a similar report which is doing by SAP at detail/item level, but am looking to develop a SUMMARY level.
SAP report is = FS10N (bhind prog. is RFGLBALANCE / RFGLITEMS )
my_alv = shuld show only TOTALS / SUMMARY line
Almost the selection screen is same in both cases.
So, I wanna to use the same prog. by using SUBMIT from my_alv_report.
So, when I use
SUBMIT RFGLBALANCE
WITH ..........................
WITH ........................
AND RETURN.
then, my_alv_report control goes to RFGLBALANCE prog. there my input is processed and the output internal table is populating in RFGLBALANCE.............so, now, I wanna to get / fetch / pull this populated internal table into my_alv_repor and there by using the same for my alv display.
( I know that, if both r Z prog.s/ Z_BAPIs, then, I can use EXPORT & IMPORT )
So, pls. let me know that,
Is it possible ?
If so, How to get it done?
SUBMIT Syntax pls.
thanq

thanq.
so, then, Can I use like, *INCLUDE RFGLBALANCE*(Standard Prog.) in my_alv_report, I mean, like
report my_alv_report message-id Z1.
INCLUDE RFGLBALANCE.
own_Logic.
thanq

Similar Messages

How to add field( VBAK-SUBMI) as a Selection Criteria - VL10

Hi friends,
Could u please help in sort out the below issues,
1. Add field VBAK-SUBMI as a Selection Criteria to the Selection Screen for the VL10 - Program V50RINCL, user exit V50R_SELECT_OPTION_ADD
2.Transfer the VBAK-SUBMI field to the report created during the VL10 transaction. Program V50RINCL, user exit V50R_USEREXIT_TRANSF.
I am bit new to enahancements, please provide some information to achieve the above objects.
Poits will be rewarded.
Thanks.
Regards. VKRAO.

Hi,
<b>Plz find the explanation abt user-exit below</b>
User exits :
1. Introduction
2. How to find user exits
3. Using Project management of SAP Enhancements
1. Introduction:
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program
SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits?
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD.
Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements, we want to create a project to enahance trasnaction VA01 .
- Go to transaction CMOD
- Create a project called ZVA01
- Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document.
Note that an enhancement can only be used in 1 project. If the enhancement is already in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder.
Note that Sold-to-party now automatically is "2155"
<b>
Reward points if it solves ur query or answer is helpful</b>
Thanks
Chinmay

SQ01 query on LDB BRF with selection criteria on BSEG

Dear all,
we built an inofset on LDB BRF (BKPF - BSEG) and a query with selection criteria based on both BKPF and BSEG tables.
My proble : when the query select a posting fullfilling header data selection criteria but not line item criteria, it still displayed the header data in the layout.
We set up a filter on the account to hide results where account is blank but we loss the filter exporting the result on access. So if anyome has a better idea, we'll be very thankfull.
Br,

Hi Rick,
What Edan proposed will work as logical AND (both filters on dates will be checked simultaneously).
Here is a solution.
Youll have a user entry variable on 0CALDAY.
- Create a new variable on 0CALDAY, customer exit, mandatory, not ready for input. This variable should return the date entered in user entry variable.
- Create a structure in columns.
- New selection (lets name it chg). Put there your KF and your Change date char. Restrict it by the user entry var. Hide it.
- New selection (lets name it crt). Put there your KF and your Created on date char. Restrict it by the customer exit var. Hide it.
New formula (lets name it FilteredAmount):
( 'chg' <> 0 ) * 'chg' + ( 'crt' <> 0 ) * 'crt'
Create a condition:
FilteredAmount <> 0.
Best regards,
Eugene

How can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

how can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

Why do the 20 values have to be different? The same code should work even if some are equal.
What do you mean by "get the result"? The result is available at the output terminal and all you need is a wire to get it where you need it. That could be an indicator, another operation, or even a hardware device.
What is the data type of the 20 values? An array? A cluster? A bunch of scalars? A waveform? Dynamic data?
LabVIEW Champion . Do more with less code and in less time .

Count() function with selective criteria?

I'm struggling with what I would expect to be a fundamental reporting concept in CR.
Suppose I have the following EMPLOYEE table:
u2022 EMPLOYEE.ID
u2022 EMPLOYEE.GENDER_CODE
u2022 EMPLOYEE.MANAGER_FLAG
I need to generate a statistical summary report containing the following:
u2022 Total number of Employees
u2022 Number of Male Employees
u2022 Number of Management Employees
This would be easy if I could just use a Count() function in the Function Workshop which
contained selective criteria. For example: Count ({EMPLOYEE.GENDER_CODE} = 'M')
But I can't figure out how to do this without getting a CR error message.
Record Selection doesn't work, because I need the whole data set.
Group Selection with Summaries doesn't work, because the gender and management
attributes are not mutually exclusive.
One solution that seems awkward to me is to create additional SQL commands in the
Database Expert using COUNT(*) and WHERE criteria to get the number of Males
and number of Managers. But I have to believe that there is a better way. Plus this
approach causes problems elsewhere in my report.
Am I missing something?
Thanks,
Bill

Thanks Raghavendra!
The good news is that I was able to create a "1 or 0" formula and then sum the resulting values.
The bad news is that I'm only able to get this to work for part of my report.
I am joining two tables. As an example COMPANY and EMPLOYEE.
I can use "1 or 0" formulas on all of the employee statistics.
But I cannot do the same for company statistics, because the number of company records being assigned a 1 is being inflated by the join between the two tables.
I have achieved a successful result by using Running Total Fields at the end of the report.
But I want to place these summary statistics at the begining of my report. (Such as Total Companies in the Western Region.)
I tried to use "COMPANY.NAME = previous(COMPANY.NAME)" logic in my function, but then I was not allowed to summarize it.
Any ideas?
Thanks,
Bill

Submit program with selection screen parameters - getting blank values

Hi, I'm submitting a program with selection screen parameters. when I pass '000' (I_TPLSCN )value for Planning Scenario and when this goes to selection screen then I don't see value for Planning scenario as '000'(I_TPLSCN ) but the value is blank in selection screen. I'm using the below code for this.
SUBMIT RMCPAMRP WITH MATNR_GL EQ I_MATNR   SIGN 'I'
                  WITH WERKS_GL EQ I_WERKS   SIGN 'I'
                  WITH PLSCN    EQ I_TPLSCN SIGN 'I'
    via selection-screen        AND RETURN.
Could anyone please help me how to display value '000' rather than blanks.
thanks in advance.

If I_MATNR, I_TPLSCN and I_WERKS are variable then try with
SUBMIT rmcpamrp
WITH matnr_gl = i_matnr
WITH plscn    = i_tplscn
WITH werks_gl = i_werks
via selection-screen
   AND RETURN .
If I_MATNR, I_TPLSCN and I_WERKS are of type range then try with
SUBMIT rmcpamrp
WITH matnr_gl IN i_matnr
WITH plscn    IN i_tplscn
WITH werks_gl IN i_werks
via selection-screen
   AND RETURN
Edited by: Pawan Kesari on Dec 24, 2009 3:33 PM

Issue calling program from transaction with selection criteria

Hi Guys,
    I ve a issue regarding calling a program from transaction.
There is a standard transaction calling a program using selection criteria no (say for eq 10 fields, just look at the eg below)
Submit <table-proname> and return using selection-set <table-varia>
With rbukrs = i_bkorm-burks    Comp Code
with Revent = i_bkorm-event event
with rbelnr = ibkorm-belnr     Doc no
with rgjahr = ibkorm-gjahr   fiscal year
with ruzeit = ibkorm-ruzeit time
with rusnam = ibkorm-rusnam user name
And so on
Now, In my program selection screen i ve only three fields, (not all mentioned above)
Parameter:
Rbukrs type bukrs, comp code
Rbelnr type belnr, doc no
Rghar type gjahr. fiscal year
Now, i configure this transaction with this program i can able to run this program from transaction.
Is every thing go right, Pls give your sugg
Points & help awarded.
Thanks in advance.

Hi,
you can call the program using 3 selection screen fields even though it is having 10 fileds, but before calling make sure that there is no mandatory fields (in rest of the 7 fields), then it will runs you report.
reward if needful.
Thanks,
Sreeram.

Portal Activity Report with Selection criteria

Hi All,
I have created an iview using 'Portal Activity Report' template, added the iview to page and page is added to the role which is created for this report. Also, users were assigned to the new role. When users go to portal and see this report, they are seeing the final output of this report along with the 'Download Report' option.
My requirement is to give selection screen option (Type of report and Reporting period) to users. So that users will change the selection criteria and run the report as per their need. Please advice me on how to do this.
Thanks in advance.
Swapna.

swapna,
you can do this by creating a webdynpro application for accessing the database tables, the list of data base tables is in this [help |http://help.sap.com/saphelp_nw04/helpdata/en/48/6aa9429b930b31e10000000a1550b0/frameset.htm]document and use web dynpro application to connect to that tables. Check this thread for[ dynpro and database tables |dynpro and database tables;
regards
Mahesh

Problem with SUBMIT report [ WITH SELECTION-TABLE ] or [ IN range ]

Hello Everybody,
I am trying to call transaction F.80 for mass reversal of FI documents by using SUBMIT sentence and its parameters like this:
LOOP AT i_zfi013 INTO wa_zfi013.
    PERFORM llena_params USING 'BR_BELNR' 'S' 'I' 'EQ' wa_zfi013-num_doc ''.
range_line-sign   = 'I'.
range_line-option = 'EQ'.
range_line-low    = wa_zfi013-num_doc.
APPEND range_line TO range_tab.
endloop.
Line: -
      SUBMIT sapf080
        WITH br_bukrs-low = p_bukrs
        WITH SELECTION-TABLE it_params [ same problem with - WITH BR_BELNR IN range_tab]
        WITH br_gjahr-low = p_an1
        WITH stogrd = '05'
        WITH testlauf = ''
        AND RETURN.
My problem is that when the report is executed the BR_BELNR only delete one document of the all the inputs in the selection criteria from the loop. if I add the statement [ VIA SELECTION-SCREEN] in the SUBMIT if open the multiple selection criteria in the screen I can check that all the documents are set in it from the ABAP code in the loop from it I just need to push F8 to copy them and run the program processing all the documents normally .
Can some one help me with this? is there a way to execute the transaction BY the SUBMIT with the multiple selection criteria for the Document Number working well?
Thank for you time and help.

This is my code:
TYPES: BEGIN OF T_ZFI013,
          BUKRS     TYPE BUKRS,
          GJAHR     TYPE GJAHR,
          MONAT     TYPE MONAT,
          ANLN1     TYPE ANLN1,
          ANLN2     TYPE ANLN2,
          NUM_DOC     TYPE BELNR_D,
          DATE     TYPE DATUM,
          TIME TYPE UZEIT,
          USER     TYPE SYUNAME,
         END OF T_ZFI013.
   DATA: I_ZFI013 TYPE STANDARD TABLE OF T_ZFI013,
         WA_ZFI013 TYPE T_ZFI013,
DATA: br_belnr       TYPE BELNR_D,
        rspar_tab TYPE TABLE OF rsparams,
        rspar_line LIKE LINE OF rspar_tab,
        range_tab LIKE RANGE OF br_belnr,
        range_line LIKE LINE OF range_tab."range_tab.
LOOP AT i_zfi013 INTO wa_zfi013.
    range_line-sign   = 'I'.
    range_line-option = 'EQ'.
    range_line-low    = wa_zfi013-num_doc.
    APPEND range_line TO range_tab.
ENDLOOP.
SUBMIT sapf080
    WITH br_bukrs-low = p_bukrs
    WITH br_belnr IN range_tab
    WITH br_gjahr-low = p_an1
    WITH stogrd = '05'
    WITH testlauf = ''.
This is the RANGE_TAB table before submit:
1     I     EQ     1001xxxxxx
2     I     EQ     1002xxxxxx
3     I     EQ     1003xxxxxx
4     I     EQ     1004xxxxxx
5     I     EQ     1005xxxxxx
6     I     EQ     1006xxxxxx
7     I     EQ     1007xxxxxx
8     I     EQ     1008xxxxxx
I think this wont work for some reason so I will start to do this by a BDC.
Many thanks for your help.

Problem with Selection Criteria with 2 or statements.

I have a report with 2 or statements in the selection criteria:
like "US IT GFS INFOSYS*" or
like "US IT GFS INFOSYS*" or
like "US IT GFS INFOSYS*"
I am just trying to do do a count of records. The details has the record # and am doing a distinct count. If I rearrange this or statement, then I get a different count. The above statement gives me a count of 1136. If I rearrange the statement to:
like "US IT GFS INFOSYS*" or
like "US IT GFS INFOSYS*" or
like "US IT GFS INFOSYS*"
I only get 192 records. I don't understand why? Please help.

Cara,
When Crystal evaluates an or statement it will stop evaluating after one of the clauses is true. Since the first or clause is returning data, true, it is not evaluating the other 2 clauses. When you change the order I am assuming that the first clause is returning data though different from the original record selection.
You may want to consider using a command object or stored procedure to generate the filter as SQL should evaluate all the or clauses.

Combination of Submit report with SELECTION-SET and WITH is not working

I tried all possibilities to make the additional parameter also pass to the report along with variant but it just does not work. Anybody faced this issue before?
Code snipped which is not taking pernr parameter along with variant 'Report Dis'.
SUBMIT H99CWTR0 USING SELECTION-SET 'REPORT DIS'
       WITH pernr = pernr-low
       EXPORTING LIST TO MEMORY
AND RETURN.

Hi,
THis sample code worked for me
data:params type rsparams.
data:it type table of rsparams.
params-low = '2003'.              "In variant ZSURESHPAGA the actual value is 2004, but it got executed for 2003.
params-kind = 'P'.
params-option = 'EQ'.
params-sign = 'I'.
params-selname = 'P_YEAR'.
append params to it.
CALL FUNCTION 'SUBMIT_REPORT'
EXPORTING
    report                 = 'Z12256_TASK1'
   VARIANT                = 'ZSURESHPAGA'
   SKIP_SELSCREEN         = 'X'
TABLES
   SELECTION_TABLE        = it
EXCEPTIONS
   JUST_VIA_VARIANT       = 1
   NO_SUBMIT_AUTH         = 2
   OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SUBMIT H99CWTR0 USING SELECTION-SET 'REPORT DIS'
WITH pernr = pernr-low       "<----check this statemnent
EXPORTING LIST TO MEMORY
AND RETURN.
Edited by: Keshav.T on May 13, 2010 4:07 PM

HT4623 if i am unhappy with new software then how to go for earlier version

if i am unhappy with new software the how to go for earlier version

Sorry, Apple has no approved method to downgrade the version of iOS on your iDevice. You can voice your displeasure with the iOS by leaving feedback at the appropriate subsection from the link below.
http://www.apple.com/feedback/

How to get result of Select from stored function.

I need to get result of select from a stored function.
In the end of my stored function I makes final select (four columns).
How it can be retrived from function?

Hi,
A function can only return one value, but it sounds like you want to return 4 values.
The one value that you return can be a record, with many columns, such as a ROWTYPE, or a TYPE that you define.
You can return an XMLTYPE that has whatever elements you want.
You can write a procedure that has several OUT parameters. (You can have OUT parameters in a function, but a lot of people find that confusing.)
In very special circumstance, you might consider returning a string that is a delimited list of values, such as '7639,SMITH,,17-DEC-1980'.
Someoneelse has a good point.
We could give a better answer if you ask a specific question, like:
"I have this table ...
I want a function such that, if I call it with these parameters ... I get ...
but if I call it like this ... then I get ..."

How to get result of MDM validation expression with type warning?

I need to get result of MDM validation expression with type WARNING (in automatic execution),
but - method validationResult.getFailedValidations(..) returns validation if it has type ERROR,
so all Warnings treated only as success despite it returned false or true.
My question - how can I get that 'false or true' expression resut for validation.
thanks

Hello Vladimir
By my opinion, hook warning exception isn't make sense because after warning message data will be change(upload).
Moreover if you start validation from WF Warning exception doesn't work at all.
If you want to do some data changes you should use and hook Error exception.
Regards
Kanstantsin Chernichenka

Accidentally I deleted the MS office that came with my Macbook? How to get it back, please help...

When i was reinstalling the OS in my Macbook, the MS office that i got with it got deleted, please help me that how to get it back..

Did you not get that MacBook at the Apple Store?
Regards,
bettyfromcalifornia

SUBMIT RFGLBALANCE WITH selection criteria, then How to get resulted itab?

Similar Messages

Maybe you are looking for