Subquery in WebI with an OLAP univers

Hi experts,
Is it possible doing a subquery as an advanced filter in a webi based on an OLAP universe?
The button is available but I get an WIS00007 error. (I have installed XI 3.1 SP2)
Thanks

You cannot use an OLAP dataprovider as subquery,
you could use the query results of a personal data data provider as the subquery in an OLAP dataprovider.
Hope this helps,
Marianne

Similar Messages

A problem in WEBI with the hierachy After updated to BO 4.1 sp03

IN the BW , I have a hierachy Char. in my Qeury. I build a OLAP connection to BO, then created a webi with BEX.
In the old BO (version 4.0 SP 03) is OK. but when updated to new BO (version 4.1 SP 03). The hierachy in prompt can't be unfold. like this
but if i input "*" to search . there is no different.
in the 4.1 sp 03 if i deleted the hierachy in the prompt.when i get into the webi(with data),then, i added a filter with the hierachy. It's OK, too.
WHY???? and how can i resolve the problem.

Hi Arie,
Yes I installed 4.1 on september 2nd and the installation guide was alreadly corrected.
I ran without any errors :
DECLARE
ACL_PATH VARCHAR2(4000);
ACL_ID RAW(16);
BEGIN
-- Look for the ACL currently assigned to '*' and give APEX_040100
-- the "connect" privilege if APEX_040100 does not have the privilege yet.
SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
-- Before checking the privilege, ensure that the ACL is valid
-- (for example, does not contain stale references to dropped users).
-- If it does, the following exception will be raised:
-- ORA-44416: Invalid ACL: Unresolved principal 'APEX_040100'
-- ORA-06512: at "XDB.DBMS_XDBZ", line ...
SELECT SYS_OP_R2O(extractValue(P.RES, '/Resource/XMLRef')) INTO ACL_ID
FROM XDB.XDB$ACL A, PATH_VIEW P
WHERE extractValue(P.RES, '/Resource/XMLRef') = REF(A) AND
EQUALS_PATH(P.RES, ACL_PATH) = 1;
DBMS_XDBZ.ValidateACL(ACL_ID);
IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'APEX_040100',
'connect') IS NULL THEN
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,
'APEX_040100', TRUE, 'connect');
END IF;
EXCEPTION
-- When no ACL has been assigned to '*'.
WHEN NO_DATA_FOUND THEN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml',
'ACL that lets power users to connect to everywhere',
'APEX_040100', TRUE, 'connect');
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
END;
COMMIT;
Thnks

WEBIs based on SQL univers don't work anymore in BI 4.1 SP2

Hello,
Since we've upgraded in BI 4.1 SP2 patch4, we can't use anymore WEBI based on SQL univers (see messages below).
Same problem with patch 6.
But it works with Rich Client.
Do you have a solution ?
Thanks in advance
Regards,
Nicolas

did you create 64bit odbc in the bo server ? if not, create and then test.

How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine.

How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine. I am new to Apple and am trying to get all my stuff working together.

This is not a supported feature of iPhone or Time Capsule.

How can i use isight camera to broadcast to web with Mac OS 10.4?

I am using an iBook G4 running OS 10.4 as a printer server. I have to do this to be able to print on my HP DeskJet 882c printer from computers running OS 10.6 and above (although I have not been able to get it to work with 10.8).
I can connect an iSight camera to the iBook via FireWire. Can I set that up to broadcast a video feed to a web site so I can visually monitor the area near the laptop and printer?

jrmnewtonma wrote: How can i use isight camera to broadcast to web with Mac OS 10.4?
You could use compatible older versions of QuickTime professional extensions for your Mac OS X version.
This professional quality software is very powerful, and it will certainly stream any video you need. However, it is not simple to use, so be prepared to do some research and study to get it configured and working.
To use your iBook with its OS X 10.4, you will need QuickTime Broadcaster 1.5.3
and Darwin Streaming Server (v5.5.5) (if you need streaming server functions.)
Although I have never used it, QuickTime Streaming Server 4.1.1 might be a useable substitute for Darwin.
Message was edited by: EZ Jim
Mac OSX 10.8.3

I am trying to watch videos online, but a message saying "You are currently browsing the web with Google Chrome..."

I have a MacBook Pro, which I just bought in August.
When I try to watch videos on my computer, a message pops up saying, "You are currently browsing the web with Google Chrome and your Video Player might be outdated." I know it's a pop up, but I don't know how to get rid of it and watch videos on my computer. I did look it up online and I downloaded the TSM Adware Removal Tool, which removed some adware files. Then I also downloaded Bitdefender Virus Scanner from the app store to scan my entire computer - nothing came up.
Please help me solve this problem. Thanks.

The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they're almost certainly the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked, but you should assume that the router is at fault until proven otherwise.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
Check the router manufacturer's website for a firmware update.
If you downloaded and installed what you thought was a software update, ask for instructions.

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

Opening PDF files on the web with IPad

Hi everyone
I am having difficulty opening some (but not all) pdf files on the web with my IPad. When I click on the icon it comes up with approx half of the first page of the document, but nothing else. It also does not provide an "open in" bar. Any thoughts on what is going on here?
With thanks, Mike.

Thank you for following up. We often have people reporting similar problems and I suggest they follow up with the website owner but I rarely hear back from the original poster so I'm never sure that this is indeed the problem. Ironically, serving a document for mobile is almost easier than serving it to a desktop browser because there are no plugins to get in the way. That said, a lot of website owners have gone through pains to do plugin detection and user authentication and authorization and mobile represents another case that they would need to handle on top of what they already do.

HT201335 when i watch movies from the web with airplay on my apple tv stop every 2 minuts

when i watch movies from the web with airplay on my apple tv stop every 2 minuts

I have a similar issue with my Home Sharing. Everything plays just fine on my Apple TV except when I try to play a movie using Home Sharing. If I choose the same show or movie from the Purchased section of iTunes it works just fine but nothing ever loads for me on Home Sharing.
Not the exact same issue, but very similar. Good luck, I'm hoping to learn something here too!

Materialize a Subquery without using "with" clause

Hi experts,
We know that we can materialize a subquery as below :
with sub_q as
( select /*+ materialize */ a,b,c from table_name )
select * from sub_q;
My question is, is there any other way to force a subquery be materialized by writing straight as below ?:
select * from
( select a,b,c from table_name );
Thanks in advance.

user503699 wrote:
You sure about that? I don't think so. ;)??? Do you understand what materialize is? I don't think so. Feel the difference:
SQL> create table emp1 as select * from emp
2 /
Table created.
SQL> explain plan for
2 with t as (
3             select /*+ materialize */ * from emp1 where deptno = 10
4            )
5 select * from t where job = 'CLERK'
6 /
Explained.
SQL> @?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
Plan hash value: 481100556
| Id | Operation                  | Name                       | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT           |                            |     3 |   261 |     5   (0)| 00:00:01 |
|   1 | TEMP TABLE TRANSFORMATION |                            |       |       |            |          |
|   2 |   LOAD AS SELECT           |                            |       |       |            |          |
|* 3 |    TABLE ACCESS FULL       | EMP1                       |     3 |   261 |     3   (0)| 00:00:01 |
|* 4 |   VIEW                     |                            |     3 |   261 |     2   (0)| 00:00:01 |
|   5 |    TABLE ACCESS FULL       | SYS_TEMP_0FD9D6608_11C6B35 |     3 |   261 |     2   (0)| 00:00:01 | <== SYS_TEMP_0FD9D6608_11C6B35 is a metrialized table t
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
   3 - filter("DEPTNO"=10)
   4 - filter("JOB"='CLERK')
Note
   - dynamic sampling used for this statement
22 rows selected.
SQL> explain plan for
2 select * from (select /*+ materialize */ * from emp1 where deptno = 10) t where job = 'CLERK'
3 /
Explained.
SQL> @?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
Plan hash value: 2226897347
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      |     1 |    87 |     3   (0)| 00:00:01 |
|* 1 | TABLE ACCESS FULL| EMP1 |     1 |    87 |     3   (0)| 00:00:01 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
   1 - filter("EMP1"."JOB"='CLERK' AND "DEPTNO"=10)
Note
   - dynamic sampling used for this statement
17 rows selected.
SQL> SY

Is it possible to dwnload a file from web with given URL into our local sap

Hi every Body!
Is it possible to download a file from web with given URL into local PC with abap.
thanks
vikram.c

hi
good
go through this link, i hope this ll help you solve your problem
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f5d3c40a-0801-0010-55b7-9e3b01745a40
thanks
mrutyun^

Export to excel in web with oracle forms 10g

we have an application running on web with oracle 10g forms in windows server 2003. We use webutil to generate excel. But it is terribly slow when its is run on web. When run locally its fine...
PLS suggest.....
Thanks,
Rekha

CLIENt_OLE transfers lots of small packets over the network,that's what it makes slow. What you could do.... write your own javabean which uses jacob and "aggregates" the low-level OLE-commands to somehow logical commands like "writeValuetoCell"

Hide unhide rolemenu in web with only one link

Hi together
is it possible to hide unhide the role menu in web with only one link by using command urls?
Regards,
M. Erbil

Hi Memo,
use something like this:

<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_PROPERTIES"/>
         <param name="TEMPLATE_ID" value="ROLEMENU"/>
         TEMPLATE PROPERTIES
</object>
<HTML>
<HEAD>
<TITLE>Rolemenu</TITLE>
      <link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
     <script type="text/javascript" >
/* This function switches the attribute HIDDEN (alternate Tablestyles) for item mytable
1. Get actual value for attribute HIDDEN
2. Send Commando with new attribute to BW Server */
        function switch_visibility(mytable) {
         var prop = SAPBWGetItemProp(mytable);
         var visibility='X';
         if (prop != null){
                  for(i=1;i<prop.length;i++){
                            if (prop<i>[0] =="HIDDEN") visibility = prop<i>[1];
            if (visibility =='X') {
                           visibility=' '
            else
                        visibility = 'X';
            SAPBWOpenURL(SAP_BW_URL_Get() +'&item=' + mytable +'&HIDDEN=' + visibility);
     -->
     </script>
</HEAD>
<BODY>
<P> <object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="ROLEMENU_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_MENU"/>
         <param name="WIDTH" value="335"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="TARGET" value=""/>
         <param name="HEIGHT" value="285"/>
         <param name="IFRAME" value="X"/>
         <param name="IFRAME_STYLE" value="X"/>
         <param name="HIERARCHY_COLOR" value=""/>
         <param name="DIFF_ICONS" value=""/>
         ITEM:            ROLEMENU_1
</object> </P><!—Include a button in HTML with id mybutton1. By clicking on link the function switch_visibility for item ROLEMENU_1 will be executed à
<table class="SAPBEXBtnStdBorder" cellspacing="0" cellpadding="0" border="0"><tr><td>
<table>
<tr>
   <td class="SAPBEXBtnStd"   id="mybutton1" > <A href="javascript:switch_visibility('ROLEMENU_1');" >show / hide menu</A>
   </td>
</tr>
</table>
</td>
</tr></TABLE><!— call function set_button, to set the correct style class for button mybutton1 à
<script type="text/javascript" >
</SCRIPT>
</BODY>
</HTML>
Regards,
Adem

Odd lockup using Bluetooth to get to Web with a Treo 700p

Getting to the web with my Verizon Treo 700p is better with Leopard than it was with Tiger. (For instructions on how to do this see http://blogs.zdnet.com/Apple/?p=215) However I do get odd behavior. If the connection is lost (not sure if it the blutetooth or the web connection) and I attempt to reconnect, sometimes the "Connecting" in the title bar starts to scroll left to right and freezes. The fan on the MacBook starts to crank up and the machine is minimally responsive. I could not quit any apps. Could not even force quit. Oddly, turning off bluetooth on the phone gave me control of the Mac back. I thought I would mention this in case any one else has seen this and if there should be a fix in the works by someone. It is odd that a bluetooth device can have this level of control over the computer.

Thought I should resolve this one. Seems I needed to upgrade the OS on the Treo. Apparently there was a minor release which fixed the issue (so minor that the only change in the version number is an underscore!) Works much better since the treo upgrade.

Oracle Business Intelligence Discoverer with the OLAP Option 11g

Is it also possible to use Oracle Business Intelligence Discoverer with the OLAP Option 11g ?
I read this article but the OLAP Option is 10g.
Thanks.

Hi,
Yes, I think so, see this article.
Rod Wets

Subquery in WebI with an OLAP univers

Similar Messages

Maybe you are looking for