Subreport preview issue differences between VS 2008 and VS 2012

I have a report that contains a subreport which source is a report already deployed on the report server. In VS 2008, when you do a preview the data in the main report displays fine and you get an error on the subreport. In VS 2012, when you
try and do a preview, the entire report displays a processing error. Why do the VS versions behave differently when it comes to displaying any of the data? Is there something I can do in VS 2012 to have my main data display?

Hi DBAlicious,
I already taken a sample test in my visual studio 2008 and visual studio 2012 environment, the result is that the main report displays fine and an error displays on the subreport when we preview the main report. The only difference is that subreport always
displays “Error: Subreport could not be shown” in VS 2008, while the subreport displays error message based on the specific exact error in VS 2012. But we can see the detail error message from Error List Window in those two versions.
In your scenario, I think the reason is that there are some errors in the main report, so the entire report displays a processing error. We can directly preview the main report without the subreport to test the main report. Or use the same project in those
two versions to test the issue again.
If there are any other questions, please feel free to let me know.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Difference between Scom 2007 and Scom 2012 Gateway server setup.

Hi All,
Greetings!!
I would like to know the differences for gateway server setup in Scom 2007 and 2012 versions..
Are there any changes in the data collection or in the configuration? and also the prerequisites for it.
Please let me know these info..
Regards,
Gokul

There is no great different in settng up gateway server in SCOM 2007 R2 and SCOM 2012. As summary, it requires
1.Request certificates.
2. Import those certificates into the target computers by using the MOMCertImport.exe tool.
3. Distribute the Microsoft.EnterpriseManagement.GatewayApprovalTool.exe to the management server.
4. Run the Microsoft.EnterpriseManagement.GatewayApprovalTool.exe tool to initiate communication between the management server and the gateway
5. Install the gateway server.
However, the prerequisites has different between SCOM 2007 R2 and SCOM 2012
SCOM 2007 R2 gateway server support folloiwng OS
Windows Server 2003 Standard Edition with Service Pack 1 (SP1)
Windows Server 2003 Standard Edition with Service Pack 2 (SP2)
Windows Server 2003 Standard x64 Edition with SP1 or SP2
Windows Server 2003 Enterprise Edition with SP1
Windows Server 2003 Enterprise Edition with SP2
Windows Server 2003 Enterprise x64 Edition with SP1 or SP2
Windows Server 2003 R2 Standard Edition with SP1 or SP2
Windows Server 2003 R2 Standard x64 Edition with SP1 or SP2
Windows Server 2003 R2 Enterprise Edition with SP1 or SP2
Windows Server 2003 R2 Enterprise x64 Edition with SP1 or SP2
Windows Server 2008 Standard 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Standard with SP1 or SP2
Windows Server 2008 Enterprise 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Enterprise with SP1 or SP2
Windows Server 2008 Datacenter 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Datacenter with SP1 or SP2
Windows Server 2008 R2
Windows Server 2008 R2 with SP1
SCOM 2007 R2 gateway server
CPU :2.8 GHz or faster
Memory: 2 GB of RAM or more
available Space: 20 GB of available hard disk space
NET Framework 2.0
Microsoft Core XML Services (MSXML) 6.0
SCOM 2012 Gateway server
Disk space: %SYSTEMDRIVE% requires at least 1024 MB free hard disk space.
Server Operating System: must be Windows Server 2008 R2 SP1, Windows Server 2012, Windows Server 2012 Core Installation or Windows Server® 2012 R2.
Processor Architecture: must be x64.
Windows PowerShell version: Windows PowerShell version 2.0, or Windows PowerShell version 3.0.
Microsoft Core XML Services (MSXML) version: Microsoft Core XML Services 6.0 is required for the management server.
.NET Framework 4 is required if the Gateway server manages UNIX/Linux agents or network devices.
Roger

Diffrence between SSIS 2008 and SSIS 2012

Hi,
I would like to know the difference between 2008 and 2012 versions.
Since we are having plan to move to 2012 version .
Please let me know if there is nay drawbacks.
Thanks,
Priyanka
priyanka

Hi Priyanka,
New features in SSIS 2012:
Project Deployment Model - Way of deploying packages through wizard
Project Parameters - Create parameters which can be used at package level and project levels
SSISDB Catelog - In SSMS, you can create it and maintain parameters and ENV details.
DQS - New transformation
Small features which I noticed:
- You can undo changes by pressing Ctrl + Z
- Variable expressions can be set inside Variable window itself (No need to go to properties window)
- You can arrange the sequence of tasks in SSIS Toolbox
For more details, please go through below technet article:
http://technet.microsoft.com/en-us/library/bb522534(v=sql.110).aspx
-Vaibhav Chaudhari

Java Development issue/differences between Core Duo and Core 2 Duo (??)

Hi Everyone,
I am a Java developer that uses my 17" MBP Core Duo for all of my development. Lately, I've been trying to use both the Glassfish Application Server V2 (from Sun) and Maven 2.09 from the Apache project. I have configured identical scenarios on my MBP Core Duo and on a 15" MBP Core 2 Duo.
The scenario involves compiling and running some webservices (at least on the Core 2 Duo) in a local development environment. Both machines use the default JDK 1.5.0_13 installed on the machine.
On the 17" Core Duo, issuing a "mvn install" command produces the following error:
[INFO] Compiling 1 source file to /Users/john/downloads/soabook-code-20070504/chap07/endpoint-provider/modules/en dpoint/target/classes
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD ERROR
[INFO] ------------------------------------------------------------------------
[INFO] Fatal error compiling
Embedded error: Prohibited package name: java.lang
[INFO] ------------------------------------------------------------------------
[INFO] For more information, run Maven with the -e switch
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 12 seconds
[INFO] Finished at: Fri Sep 05 07:09:06 CDT 2008
[INFO] Final Memory: 9M/17M
[INFO] ------------------------------------------------------------------------
Running Maven with the "-e" switch turned on produces the following stacktrace:
org.apache.maven.lifecycle.LifecycleExecutionException: Fatal error compiling
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecyc leExecutor.java:564)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalWithLifecycle(De faultLifecycleExecutor.java:480)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(DefaultLifecycl eExecutor.java:459)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHandleFailure s(DefaultLifecycleExecutor.java:311)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegments(Default LifecycleExecutor.java:278)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLifecycleExe cutor.java:143)
at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:334)
at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:125)
at org.apache.maven.cli.MavenCli.main(MavenCli.java:280)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.ja va:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
Caused by: org.apache.maven.plugin.MojoExecutionException: Fatal error compiling
at org.apache.maven.plugin.AbstractCompilerMojo.execute(AbstractCompilerMojo.java: 498)
at org.apache.maven.plugin.CompilerMojo.execute(CompilerMojo.java:114)
at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPluginManager.j ava:443)
at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecyc leExecutor.java:539)
... 16 more
Caused by: java.lang.SecurityException: Prohibited package name: java.lang
at java.lang.ClassLoader.preDefineClass(ClassLoader.java:534)
at java.lang.ClassLoader.defineClass(ClassLoader.java:669)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at org.codehaus.plexus.compiler.javac.IsolatedClassLoader.loadClass(IsolatedClassL oader.java:56)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:675)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at org.codehaus.plexus.compiler.javac.IsolatedClassLoader.loadClass(IsolatedClassL oader.java:56)
at org.codehaus.plexus.compiler.javac.JavacCompiler.compileInProcess(JavacCompiler .java:398)
at org.codehaus.plexus.compiler.javac.JavacCompiler.compile(JavacCompiler.java:141 )
at org.apache.maven.plugin.AbstractCompilerMojo.execute(AbstractCompilerMojo.java: 493)
However, the exact same software setup on the Core 2 Duo produces this result (which I would expect on the Core Duo):
[INFO] Installing /Users/john/Downloads/soabook-code-20070504/chap07/endpoint-provider/pom.xml to /Users/mjhart/.m2/repository/soabook/chap07-endpoint-provider/1.0/chap07-endpoi nt-provider-1.0.pom
[INFO]
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary:
[INFO] ------------------------------------------------------------------------
[INFO] CHAP07-ENDPOINT-PROVIDER-WSDL2JAVA .................... SUCCESS [1:35.885s]
[INFO] CHAP07-ENDPOINT-PROVIDER-ENDPOINT ..................... SUCCESS [7.221s]
[INFO] CHAP07-ENDPOINT-PROVIDER-CLIENT ....................... SUCCESS [16.525s]
[INFO] CHAP07-ENDPOINT-PROVIDER .............................. SUCCESS [1.597s]
[INFO] ------------------------------------------------------------------------
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESSFUL
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 2 minutes 1 second
[INFO] Finished at: Fri Sep 05 07:07:23 CDT 2008
[INFO] Final Memory: 16M/30M
[INFO] ------------------------------------------------------------------------
I have installed the same software versions and have the same configuration on a Windows desktop running XP SP2 and get the same successful result.
Is this an issue between the Core Duo and Core 2 Duo? I can't see that it is since I don't believe the hardware influences the software to that degree. However, I am at a loss for what is causing the issue and the Apache Maven list insists that there are developers that are using Maven successfully on OS X.
I really need to get past this issue, but I am at a loss. Please help.
Thanks,
John

Have you repaired permissions? (/Applications/Utilities/Disk Utility.app)
Are you sure you're using JDK 5? (Applications/Utilities/Java/Java Preferences.app or output of $ javac -version)
--greg

What are the noticable differences between pages 2008 and 2011?

I ask this because publisher in Microsoft seems to have thought of everything when it comes to publishing that pages hasn't got,. at least my version which I bought in 2008 . I need to decide whether to just upgrade to 2011 or purchase a copy of publisher for Mac.
Does anyone out there have much experienced of publishing?

juliekins1 wrote:
or purchase a copy of publisher for Mac.
There is no such animal as "publisher for Mac." Are you referring to MS Office?
http://www.microsoft.com/mac/

What is the difference between delivery date and actual goods issue date?

Hi ,
Can you please tell me the difference between Delivery date and Actual goods issue date ?
Delivery data can be be greater than goods issue date?
Thanks,
Ajay

Hi Ajay,
Delivery date means its the original date on which the delivery should be done.Actual goods Issue date is the date on which goods to be delivered according to the purchase order.There can be delay in the delivery so we maintain 2 objects.
Yes delivery date can be greater than Goods Issue date.
Hope this clears
Regards
Karthik

What is the difference between "create set" and "create dynamic set"?

What is the difference between "create set" and "create dynamic set"?
we have a complete cube ready for production that was tested and working without any issues in non-r2. we found that some "create set" assignments don't work in R2. But when changed to from "create set" to "create dynamic set"?
they are working, However, not sure how it will impact other areas of the cube.

Thanks YuliaKlimov, I can reproduce this issue, but I cannot explain the different behaviors between SSAS 2008 and 2008R2. As a workaround,
could you try to use dynamic set or create statics set but with fixed member for example:
CREATE
SET CURRENTCUBE.[Prior Month] AS
[Date].[Date Key].&[20050723].PrevMember
, DISPLAY_FOLDER = 'Relative Period Sets';
Personally, I think your set is dynamic set, because the currentmember is changed base on current selection. You can also submit this issue
on below official link to get confirmation from Product Group:
https://connect.microsoft.com/SQLServer/
Thanks,
Raymond
Raymond Li - MSFT

What is difference between bex analyser and bex browser

what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

hi
Bex Browser
The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
Document types that you can work with in the BEx Browser are:
· BW workbooks
· Documents that are stored in the Business Document Service (BDS)
· Links (references to file system, shortcuts)
· Links to internet sites (URLs)
· SAP transaction calls.
· Web applications and Web templates
· Crystal Reports
Bex Analyser
The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
Features
You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
Overview of the Functional Area of the BEx Analyzer:
·        BEx toolbar
You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
·        Evaluating Query Data
The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
·        Queries in Workbooks
Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
·        Precalculating workbooks
You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
Activities
To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
Hope this will solve your issu
nagarjuna

What is difference between user group and reference user group?

hi
guys,
what is difference between user group and reference user group?
your regards
p.suresh

Hi ,
Chk the link below for your clarifiacation.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/c1c81c445f11d189f00000e81ddfac/frameset.htm
Hope it helps.
Regards,
Amit
Edited by: Amit Kotwani on Sep 2, 2008 2:15 PM

WHAT IS DIFFERENCE BETWEEN FIRMWARE CKP5CN1334ER AND VersionCLP1CN1322CR,

WHAT IS DIFFERENCE BETWEEN FIRMWARE CKP5CN1334ER AND VersionCLP1CN1322CR, i GET A MESSAGE WHEN I TRY TO SCAN AN EMAIL THAT I NEED TO MANUALLY CHECK BY FIRMWARE

Hi sawmill1,
Welcome to the HP Support Forums. I see that you are getting a message to update the firmware of your printer to allow you to use scan to email.
To better assist you, would you please provide some further information:
What make/model/product number of HP printer do you have? How Do I Find My Model Number or Product Number?
How is the printer connected (USB cable, ethernet, or wireless)?
What operating system are you using on your computer? whatsmyos.com
Are you getting any other error messages? If yes, what does it say and where is it displayed (printer or computer)?
Have you tried to update the firmware of the printer?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

What is the difference between list display and grid display in alv report

Hai genious
i am a new of the abap, i dont know the alv report, i have a small doubt, can u please tell me what is the main difference between list display and grid display in alv report
thanks&regards
chinnu

Hi ,
1. For all practical purposes, they are the same.
2. Some differences:
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
I hope it helps.
Regards,
Mamta
Edited by: Mamta Verma on Nov 27, 2008 6:41 AM

Difference between Scheduling lines and Delivery schedule

Hi SD Experts
can u say me the clear difference between Scheduling lines and Delivery schedule.
where we will maintain deliver schedule. whether delivery schedule is automatically created along scheduling agreements..
with regards
James

Hi James,
Schedule Lines: Has basically information realted to delivery scheduling in Sales Order level.
Delivery Scheduling: Is a process using which system will determine what are the different activities which need to be performed and time taken for each activitiy only after which the material can be delivered to the customer.
Delievry scheduling will be started only from the material availability date i.e., system will first determine the material avail date and then do scheduling. By default Standard SAP system does Backward Scheduling in case material availability falls beyond the required delivery date system will do forward schedluing
Delivery Scheduling consists of the following Basic activities:
We give deatils while creating order:
Order Creation Date
Required Delivery Date
Order date - Material availability date - Transportation Planning Date - Loading date - Goods Issue Date - Required Delivery Date
Time Between GI Date and required Delivery Date is called Transit Time
Time Between LoadingDate and GI Date is called Loading time
Time Between Material Availability Date and Loading Date consists of 2 components - Pick / PackTime and Transportation Planning Time
System has to calculate all this before it determines the confirmed delivery date.
Give your mail Id I have some Presentation I will send you across.
REWARD POINTS IF IT HELPS
Regards
Srini

The difference between SOAP adapter and WS adapter in PI 7.1

Hello all,
can anybody explain what is the main difference between SOAP adapter and WS adapter in PI 7.1?
I have checked this [link|http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm]
but was not able to find the real difference.
Or better, what can I do with WS adapter I can't do with SOAP adapter? What are their advantages/disadvantages?
Thank you all, Igor.

In addition to RM, ws adapter also support other ws standard like SAML which is not available in SOAP adatper. Beside:
if your sender or receiver is SAP system, you can also monitor the message in the sender/receiver in addition to the PI box. This is a very good thing, because sometime the MONI in PI shows nothing wrong, but the MONI in your receiver will show you error message that's only related to the receiver system.
However, if you define ws sender CC, and your ws client doesn't support RM, you will have issue sending ws request.
And ws CC will generate ws runtime in PI box, if your configuration is wrong (like user name and password not correct), even if you correct it, the ws runtime sometime won't be regenated based on the correction. In this case you need to delete the ws CC/agreement, and re-create it with all correct information.
Beside make sure your basis team configured the PI system properly regarding ws. If not, you will have lot of pain to figure the problem which was my case.
Jayson

Difference between business activity and service process in transaction

Hi Friends,
Can anyone explain me the difference between business activity and service process in transaction category of service desk
Thanks & regards,
Shanmugam Balamurugan

Hi,
Activity means e.g.. sales call, customer visit etc.
But service process means after you sale your product if some service related issue arrives then that is taken care by this transaction.
Inspire by rewarding.
Regards,
Nikhil

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

Subreport preview issue differences between VS 2008 and VS 2012

Similar Messages

Maybe you are looking for