Subscription to business event does not fire

I am working in the R12 PIM product . I setup a subscription rule function for the event oracle.apps.ego.item.postItemCreate
. I just added one line in my function to insert a value in a dummy table.
But nothing gets inserted.
Is there any table/view to check if the event was raised. Has anyone worked on PIM/PLM events. I enabled the event and created a subscription as per the PIM guide but the subscription is not raised.
Any suggestions please ?
thank you
satya

Satya
I just checked the 12.0.4 instance, This event is disabled. Did you enable it before adding subscription?
If, yes, have you used phase above 100 which defers the event, if not it is synchronous and the table should be populated.
If deferred, check the table wf_deferred.
select count(*),state
from wf_deferred
where corrid='APPS:oracle.apps.ego.item.postItemCreate'
group by state;
This SQL should return rows if the subscription is deferred one and state should be 2 if already processed oterwise 0.
You can also test it by raising the event manually using test see whether the row comes into this.
Thanks
Nagamohan

Similar Messages

Accordion load event does not fire when accordion and load event created dynamically using actionsript

I cannot get the accordion load event to fire when I have
created the accordion and load event using actionscript . Here is
some sample code:
createClassObject(mx.containers.Accordion, "acc",
getNextHighestDepth());
acc.createSegment(mx.containers.ScrollPane, "sc1", "Number
One");
acc.createSegment(mx.containers.ScrollPane, "sc2", "Number
Two");
var accLis=new Object();
accLis.load=function(evtObj) {
trace("load");
accLis.change=function(evtObj) {
trace("change");
acc.addEventListener("load", accLis);
acc.addEventListener("change", accLis);
I made sure to add the ScrollPane and Accordion components
to my library. So the load event does not fire, but the change
event does fire. And through further testing the other events do
not fire, including the draw event. Can anyone help? The only time
I can get the load event to fire on an accordion is if I put an
accordion on stage, select it and add the actionscript to the
objects actions like shown below:
on(load) {
trace("load");
on(draw) {
trace("draw");
Can somebody help? Unfortunately I must create all my
components dynamically. Thank you in advance.

I'm having this issue also...but only apparently with Internet Explorer and only on some machines...ideas?

2 Create bindings in 1 page, second Create event does not fire (ADF)

I have an ADF, Struts, JSP master detail page and within that page there is a Create binding on the master view and this works fine.
I added the detail list to the page and added a Create binding for this view underneath the list.
The second create event does not seem to fire at all, when the button is clicked the page gets submitted and the request forwards to the correct page to display the input form but the contents of this form is the current selected detail row in the view and not a new row.
I have created 2 new pages to test the detail view... I put a link in the original page to a test list page that displays the detail list and included a Create binding in this page which links to a test create page and this works fine.
Has anyone else had this problem?
Can there be only 1 Create event binding in a single page?
Is there a way round this other than having to have my detail page on a seperate page?
The Jdeveloper version I am using is as follows...
JDeveloper Version 10.1.2.0.0 (Build 1811)
Oracle IDE     10.1.2.17.84
Business Components Version     10.1.2.17.96
UML Modelers Version     10.1.2.16.71
Versioning Support     10.1.2.16.71
WebDAV Support Version     10.1.2.16.71
Struts Modeler Version     10.1.2.6.15
Designer Generators Framework     10.1.2.7.56
ADF UIX     2.2.16
java.version     1.4.2_04
Thanks
Al

Can you do something like this?
1. Look at the uimodel for your page and find the Create that is the action binding for the detail. Name it something like: CreateDetail
2. Change the button on the page to create a detail to be named: event_CreateDetail.
3. Change the forward from Master/Detail browser page to: CreateDetail
Can you provide more details on:
1. What are the names of the create bindings for master, then detail?
2. What is the name of the forwards, that is the struts-config.xml action definition for this page?
I hope this helps!

Business Event Does Not Appear in ESS Portal

Hi People,
I would like to ask for assistance on this problem:
A user created a business event in the SAP system. But she canu2019t make a booking in this course through the ESS portal because the course canu2019t be found upon searching it. She always got this error message: u201Crestrictions, or use a different search termu201D. We already provided her a number of workaround solutions like using different search terms, changing the field period to all, etc. but still she canu2019t see this course in the portal to make a booking.
Can you help me on this?
Thanks in advance!

Amir ,
Check this link , I t will help you
http://help.sap.com/saphelp_nw04s/helpdata/en/1e/62eae2357c4596bda2476d0a6503e3/frameset.htm
Set the property "Add to Favourites" to Yes
Portal Content -> Content provided by SAP -> End user Content -> Standard Portal User -> Default Framework page ---> Edit Object
Open the Page Title Bar -> Search for the property -> Show 'Add to Browser Favorites'
and set this property to Yes.
Now refresh the page. It will show this option.
Koti Reddy

JComboBox does not fire Event

JCombobox does not fire any event which should be send when typing on the keyboard. (Keypressed, keyReleased, keyTyped, caret-operations)
Is there a known bug?
I am using Netbeans 3.6 RC1 with Java 1.4.2_04 under WindowsXP.
Thanks for your help
Klaus

myComboBox.getEditor().getEditorComponent().addKeyListener()

Flash CS4 onPeerConnect does not fire

Hi
I tryed to do Flex example for simple chat (p2p) with Stratus at Flash CS4 IDE
(adapted it of course) but onPeerConnect does not fire.
Can you take a look at my code ?
What's wrong with it ?
package {
    import flash.events.*;
    import flash.net.*;
    import flash.display.*;
    import flash.media.*;
    public class stratusTest2 extends Sprite {
        private const SERVER_ADDRESS:String="rtmfp://stratus.adobe.com/";
        private const DEVELOPER_KEY:String="a9fb14e5b040800e8327ab51-37f33907d0c1/";
        private var nc:NetConnection;
        private var myPeerID:String;
        private var farPeerID:String;
        // streams
        private var sendStream:NetStream;
        private var recvStream:NetStream;
        private var VideoDisplay:MyVideoDisplay;
        private var FAR_PeerVideoDisplay:farPeerVideoDisplay;
        private var VidDisplay:Sprite;
        public function stratusTest2(){
            addEventListener("addedToStage",initThis);
        private function initThis(e:Event){
            VidDisplay=new Sprite();
            addChild(VidDisplay);
            connectToStratusBTN.addEventListener("mouseDown",initConnection);
            initSendStreamBTN.addEventListener("mouseDown",initSendStream);
            initReceiveStreamBTN.addEventListener("mouseDown",initRecvStream);
            sendDataBTN.addEventListener("mouseDown",sendDataBTNPressed);
        private function initConnection(e:MouseEvent){
            if (MY_peerIDText.text) {
                farPeerID=MY_peerIDText.text;
            nc=new NetConnection();
            nc.addEventListener(NetStatusEvent.NET_STATUS,ncStatus);
            nc.connect(SERVER_ADDRESS+DEVELOPER_KEY);
        private function ncStatus(event:NetStatusEvent):void {
            INF.appendText("ncStatus: "+event.info.code+"\n");
            trace(event.info.code);
            myPeerID=nc.nearID;
            MY_peerIDText.text=myPeerID;
        private function initSendStream(e:MouseEvent){
            trace("initSendStream");
            INF.appendText("initSendStream\n");
            sendStream=new NetStream(nc,NetStream.DIRECT_CONNECTIONS);
            sendStream.addEventListener(NetStatusEvent.NET_STATUS,netStatusHandler);
            sendStream.publish("__media");
            var sendStreamClient:Object=new Object();
            sendStream.client=sendStreamClient;
            sendStreamClient.onPeerConnect=function(callerns:NetStream):Boolean{
                farPeerID = callerns.farID;
                trace("onPeerConnect "+farPeerID);
                INF.appendText("onPeerConnect "+farPeerID+"\n");
                return true;
            //VideoDisplay=new MyVideoDisplay(VidDisplay);
            //var camera:Camera=Camera.getCamera();
            //VideoDisplay.attachCamera(camera);
            //sendStream.attachCamera(camera);
        private function initRecvStream(e:MouseEvent){
            recvStream=new NetStream(nc,farPeerID);
            INF.appendText("start receiving from "+farPeerID+"\n");
            recvStream.addEventListener(NetStatusEvent.NET_STATUS,netStatusHandler);
            recvStream.play("__media");
            recvStream.client=this;
            //FAR_PeerVideoDisplay=new farPeerVideoDisplay(VidDisplay);
            //FAR_PeerVideoDisplay.attachStream(recvStream);
        public function receiveSomeData(str:String){
            txtReceiveData.text=str;
        private function sendDataBTNPressed(e:MouseEvent){
            sendStream.send("receiveSomeData",txtSendData.text);
        private function netStatusHandler(event:NetStatusEvent):void {
            trace("netStatusHandler: "+event.info.code);
            INF.appendText("netStatusHandler: "+event.info.code+"\n");
            trace(event.info.code);
i have 3 input texts: MY_peerIDText, txtSendData, txtReceiveData
When i press connectToStratusBTN i get ID after than i open another
browser window with the same swf and paste this ID into MY_peerIDText
After connection i press initSendStreamBTN in first swf (it is 1st browser page)
and i press initReceiveStreamBTN in 2nd swf
After that iwrite down some text in txtSendData TextField (in 1st browser page) and press sendDataBTN
Nothing happens

this function doesn't work correctly:
private function sendDataBTNPressed(e:MouseEvent){
            sendStream.send("receiveSomeData",txtSendData.text);
because you send not String, but link to the txtSendData.text, which is empty in another peer.
So, solution is following (not the one, but for example):
private function sendDataBTNPressed(e:MouseEvent){
         var sendString:String = "";
        sendString+=txtSendData.text;
        sendStream.send("receiveSomeData",sendString);

BAPI_BUPA_CENTRAL_CHANGE: Business partner does not exist

Hello,
I'm trying to change a business partner, which I created with BAPI_BUPA_CREATE_FROM_DATA.
But I get the error message "Business partner does not exist"
I do following:
1. create the BP with the BAPI_BUPA_CREATE_FROM_DATA
get the BUSINESSPATNER- number
2. fire BAPI_TRANSACTION_COMMIT.
In the SAP-GUI transaction BUP3 I can see my BP, ok
3. I try to change this BP with BAPI_BUPA_CENTRAL_CHANGE
and I get an error "Business partner does not exist"
Why?
I'm using JCO, I used to set BUSINESSPARTNER with and without leading zero - it doesn't work.
Can some one give me an advice?
Thanks,
Sergej Berg

Hi,
The "VALID_DATE" should be set to the date of execution (at least this is what I'm doing in my system).
If you execute it via SE37 you can give it in the format of DDMMYYYY, but if you are testing an IDOC via WE19 you have to give it in the format of YYYYMMDD.
Enjoy,
Ayal.

Busy greeting does not play when I am on another call

My busy greeting does not play when I am on another call. My regular greeting plays. I called verizon and they gave me some **bleep** about how that feature doesn't work if you have call waiting. It USED to work for me and why do they promote it as a dfeature with their Freedom Essentials package that comes with call waiting? Does anyone know what is going on? I need this feature to work for me.

Also in the cases of incoming calls or if you place a call and forget to dial *70, in many states you can use 3 way calling to click over and dial *70 to activate Tone Block while on a call. You will hear 3 short confirmation tones and will then be returned to your other call. HOWEVER, do this with care because in some areas there will be a charge for using the 3 way calling if you do not have a monthly subscription to it. In other states Verizon will permit you to use 3 Way solely for the purpose of activating Tone Block without a charge. So check to see what the rules are where you are beforehand.

DidSelectRowAtIndexPath does not fire in SDK 3.0

Hi everyone!
I have iPhone application that works well in SDK 2.2.1 But in SDK 3.0 event didSelectRowAtIndexPath (as well as willSelectRowAtIndexPath) in MyTableViewController does not fire.
I've downloaded "TheElements" sample application and it works fine on 3.0. I figured out that there is a difference in UITableViewCell initialization. So I removed old initWithFrame method and created new one initWithStyle. But no luck. I put breakpoint inside didSelectRowAtIndexPath event but debugger does not stop there.
What other changes should I make to fire didSelectRowAtIndexPath event?
Any help will be appreciated.

romex wrote:
Removing touchesBegan and touchesEnded methods from custom cell class resolved the problem.
When we were working on this last June, do you remember if the methods you removed had been passing the events to super? I thought we covered that, but I don't see it anywhere in the thread. In other words, did the methods look like the example below?
- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
[super touchesBegan:touches withEvent:event]; //<-- pass to UITableViewCell
// cell does something else here
Or, was anything like the following tried?:
- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
[[self superview] touchesBegan:touches withEvent:event]; //<-- pass to super view
// cell does something else here
I still think something about the responder chain must have changed in 3.0, but it seems like one or both of the above methods should still work. If neither of them gets the touches where they need to go, maybe nextResponder isn't the same as superview(?). In that case you might try this:
- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
[[self nextResponder] touchesBegan:touches withEvent:event]; //<-- pass to next responder
// add extra sanity check
NSLog(@"superview=%@ nextResponder=%@", [self superview], [self nextResponder]);
// cell does something else here
Hope the above sheds more light than confusion!
- Ray

Simple WD4A Portal Eventing does not work

Hello togehter,
I'm trying to get a simple Portal Eventing to work with two WebDynpro ABAP components. I read several threads as well as a blog from Thomas Jung about this but still have no eventing. What am I doing wrong? I think that it might be only a little obstacle but I can't get it. So what I didi is:
1.) Created 1st WD4A application with a button and an action behind that button:
DATA: l_api_component TYPE REF TO if_wd_component,
        l_portal_manager TYPE REF TO if_wd_portal_integration.
l_api_component = wd_comp_controller->wd_get_api( ).
l_portal_manager = l_api_component->get_portal_manager( ).
l_portal_manager->fire(
    portal_event_namespace = 'urn:my.namespace'
    portal_event_name      = 'test_event'
    portal_event_parameter = 'testValue' ).
2.) Created 2nd WD4A application with the following code in the WDDOinit-Method:
DATA: l_api_component TYPE REF TO if_wd_component,
        l_portal_manager TYPE REF TO if_wd_portal_integration,
        view TYPE REF TO if_wd_view_controller.
l_api_component = wd_comp_controller->wd_get_api( ).
l_portal_manager = l_api_component->get_portal_manager( ).
view ?= wd_this->wd_get_api( ).
l_portal_manager->subscribe_event(
    portal_event_namespace = 'urn:my.namespace'
    portal_event_name      = 'test_event'
    view                   = view
    ACTION                 = 'CATCH_EVENT' ).
and an action.
method ONACTIONCATCH_EVENT .
data: EVT_NAME type STRING,
        evt_parameter type string.
EVT_NAME = WDEVENT->GET_STRING( NAME = 'PORTAL_EVENT_NAME' ).
if EVT_NAME = 'test_event'.
    evt_parameter = WDEVENT->GET_STRING( NAME = 'PORTAL_EVENT_PARAMETER' ).
    DATA:
      ls_text TYPE if_main=>element_main,
      node_main TYPE REF TO if_wd_context_node,
      elem_main TYPE REF TO if_wd_context_element.
    node_main = wd_context->get_child_node( name = `MAIN` ).
    evt_parameter = 'IT WORKED'.
else.
    evt_parameter = 'did not work'.
endif.
ls_text-text_receiver = evt_parameter.
node_main->bind_element( ls_text ).
endmethod.
3.) FInally I created two iViews (for each WD4A application) and a page, linked the iViews in the page and made a preview. Unfortunately nothing happend in the second iVIew with the 2nd WD4A application in it.
Any help?
Thanx in advance
Matthias

Hello,
thanks for your answers. But the problem is not yet solved, the link gives nothing new for me.
To amend my first post:
After having created and activated my both small WD4A applications, I created 2 similar iViews (iViews for WebDynpro -> and chose WD ABAP) in my portal. Both iViews have the same namespace (which is SAP - is this ok?) and no application parameter.
Then I created both a Standard SAP page and a WebDynpro proxy page and added the 2 iViews as deltalink. The page and the iViews have the same prefix (but this is not important, isn't it?).
--> In both pages the portal eventing does not work
The ABAP server and the Portal server are the same machine and I call the portal with the full qualified domain name:
http://<servername>.<domain>:50000/irj/portal
When I test my WD4A applications in se80 I get the path http://<servername>.<domain>:8000/sap/bc/webdynpro/sap/z_event_receiver?sap-language=EN
so this is the same domain.
I even have an entry in my hosts-file for
<myInternalIp> <servername>.<domain>
- Do I have to specify the domain explicitly in addition when integration the WD4A applications in the portal?
- Is there a correlation between the Portal Event namespace, the namespace of my iViews and page and the domain name of my server?
- Does the portal event namespave to have the prefix urn: or not?
Thanks again in advance

ON-LOGON does not fire in Form B, called from Form A

We have a situation like this. We are using Forms (Forms [32 Bit] Version 10.1.2.0.2 (Production)).
We migrated this application to Forms 11.2.0.1.0. Problem is that the ON-LOGON trigger does not fire in the 2nd level forms. Our application work like this.
(a.) User double-clicks URL icon.
(b.) Form A is opened without asking for un/pwd. We put a NULL; in the ON-LOGON of A.fmb.
(c.) This is the main form of the application. This has a canvas with 6 buttons. Each button will launch it's own separate application with it's own menu.
(d.) Now user presses button in A. This launches Form B. We use
Run_Product(FORMS, 'B', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL); (e.) Now, in Form B, in the ON-LOGON trigger we have put code to show the logon screen and login to the DB.
Problem is, this works in 10g Forms. But we had to replace the RUN_PRODUCT with a CALL_FORM after migrating to 11g since RUN_PRODUCT is not supported in 11g.
Problem is that when you use CALL_FORM to call Form B, the ON-LOGON of the Form B does not fire. We tried OPEN_FORM and NEW_FORM with different parameters, but the behavior is the same. i.e. ON-LOGON does not fire.
What is the solution or workaround for this please.
Edited by: user12240205 on Oct 15, 2012 4:50 AM
Edited by: user12240205 on Oct 15, 2012 4:52 AM

Michael Ferrante (Oracle) wrote:
If you need to open another form you should use CALL_FORM, OPEN_FORM, or NEW_FORM. In these cases, ON-LOGON will not automatically fire because the connect info is passed from the calling form. If you need to login from the called form then you need to need to programatically cause that to occur. Refer to the LOGON and LOGON_SCREEN built-ins in the Builder help for more info. You can fire these from almost any trigger you like, for example in a WHEN-NEW-FORM-INSTANCE trigger or where ever is appropriate for you application.Michael, we tried using the CALL_FORM, OPEN_FORM & NEW_FORM.
Also, there is NO connection to the DB, when B is called from A since we don't login to the DB in A (ON-LOGON has NULL;).
So, if there is no DB connection when B is called, shouldn't the ON-LOGON in B fire?
We tried firing the LOGON_SCREEN and LOGON in the WHEN-NEW-FORM-INSTANCE. But, for some reason, the we don't get the menu (we get a menu not found error). We tried correcting the paths and other things but still no solution.

My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish

Calendar on iOS 7.1: Cannot Save Event - That event does not belong to that event store.

Hi All,
I have an iPhone 5 running iOS 7.1.
Yesterday, while updating a birthday in the iPhone iOS calendar app (default calendar = GMail), I noticed that the new 'List View' in the iOS 7.1 calendar (and only that view) showed an event called 'New Event' - which has a start date of 2014 and an end date of 2001. If I go into that event, it will show me no title and no location - only, as mentioned, funny start and end times. The 'Delete Event' button is completely missing. This 'New Event' does not come up in any other view.
Trying to input a ficticious title with a valid start and end time into that event slot leads to a message from the calendar app saying: "Cannot Save Event - That event does not belong to that event store." I have deleted all calendars and re-add them again via settings, with / without soft and hard reset and tried every possible combination. Yet, the event will not disappear.
The funny thing is that this 'New Event' will still showed up, even when my GMail, work and iCloud calendars were disabled. I have, however, subscribed to a GMail calendar for Australian holidays, and there is a built-in 'Birthday' calendar that pulls the dates from the contacts (I do not use that contact field, though).
Does anyone have a similar issue? Any suggestions how to fix it?
Thanks in advance!
Edit: This 'New Event' does not seem to sync to any calendar other than on the iPhone - not to Gmail, not to work, not to iCloud.

Had same problem. Although the phone looks off it actually isnt. If you actually turn it off and then on again this problem will disappear. I think its a memory overload issue that is solved by clearing the memory by turning it off.
Worked for me

HT2513 I have a mac and an ipad. when i create and ical event on my mac and then sync to my ipad, the event replicates; however, when i create an ical event on my ipad and then sync, the ical event does not sync.

Question: I have a mac and an ipad. when i create an ical event on my mac and then sync, the event transfers to my ipad. HOWEVER: when i create an ical event on my ipad and then sync, the event does not transfer. what am i doing wrong???
cadybill

Greetings,
Go to Apple > Software Update and install all available updates until no more are offered.
On iPad go to Settings > General > Software Update and install any updates.
Follow this article for issues with calendars: http://support.apple.com/kb/TS2481
Hope that helps.

When putting in "time/date" of future events, does not accept?

When putting in "time/date" of future events, does not accept?

I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
No

Subscription to business event does not fire

Similar Messages

Maybe you are looking for