Substitute listing
Hi all,
May I know, if there is any report why which I can see the list of all the substitutes in the system.
Dear Acorn,
There is a table HRUS_D2 to see the substitutes.
Please assign points as applicable.
Regards,
Ravi
Similar Messages
-
Hi every one,
I want to set field values to be read only
I have chosen responsibility “Employee Self-Service” and then function “Personal Information” under that.
Under section “Phone Numbers” I have , click on Update
By default Number column is always editable.
here I have to implement ,
If I select Type as “Home Fax”, Number column should be read-only.
How can I do this?
Edited by: Want Java on Nov 15, 2010 3:18 AMHi,
Below steps for Vo extension:
---Copy the package in which that seeded vo exists to your local machine where you have jdeveloper installed.
---Create a new OA Workspace and project.
---Create your Custom package and in that create new View Object with new Query including your new attribute.
Ensure in the extends you select the Seeded VO.
---While creating VO select in extends property standard vo and create tr attribute.
---Double click on your jpx and go to substitution and select seeded VO in available list and Custom VO in Substitute List Click on Add.
---FTP the new package you created to $JAVA_TOP
---Run jpxImport utility for your substitution to take place.
---Bounce apache.
---Through personalisation set read only for Number as i given in SPEL.${oa.seacrhVo1.readonlytr}.
---While you will attach VO to that field ensure View Instance name is your Seeded View Instance name while view Attribute will be your new Attribute added.
Refer:
http://oracle-hack.blogspot.com/2008/03/how-to-extend-view-object-in-oa.html
Regards
Meher Irk
Edited by: Meher Irk on Nov 15, 2010 6:39 PM -
My mac is substituting commas for semicolons in my email distribution lists, any ideas?
My Mac is substituting commas for the semicolons in my email distribution lists, anyone have any suggestions?
It sounds like your hard disk is not accessible, I would first you need to start your iMac with the system DVD that came with your system, then format the hard drive with disk utility, then install the Mac OS X on to your newly formatted drive.
-
Substitutions - field does not appear in list of 'substitutable fields'
Specifically, I would like to use a exit substitution to replace the content of the Structure PRPS-POSID field.
However, I cannot seem to use a simple substitution rule (since PRPS-POSID does not appear as a substitutable field in the PRPS list of fields that pops up when creating a 'Step'). Most of the PRPS field are availed as 'substitutable fields' but not POSID.
The user exit approach is proving difficult since I cannot add the following code unless I put in a data or tables statement (which is NOT recommended).
If proj-PSPID(7) <> prps-POSID(7) .
prps-posiD(7) = PROJ-PSPID(7) .
ENDIF.
Please help!Hello Shrikant;
The requirement is to ensure that the WBS element numbering (prps-posid(7) ) will always match that of the Project Definition (proj-pspid(7) ). This numbering rule is required to comply with the Fund Centre numbering since the fund center number utilizes the Project Definition number as an identifier ( I will email you some screen prints).
If there is a discrepency between the WBS element numbering (prps-posid(7) ) and the Project Definition (proj-pspid(7) ) number, the requirement is to assign Project Definition (proj-pspid(7) to the WBS element numbering (prps-posid(7) . The transaction used to call the substitution exit is CJ20N.
A big thanks for your comments so far.
Peter Forster. -
ITunes 9-- No "Shopping Cart", "Wish List" a poor substitute!
I miss greatly the easy functionality of the iTunes8 "Shopping Cart".
iT9's "Wish List" lacks SC's functionality and ease of use.
Has anyone who valued the iT8 Shopping Cart's functionality found a way to approach it in iT9?
I haven't and really miss it-- but maybe I just haven't figured WL out yet?
There seem to be two ways to populate your Wish List:
1. use the drop down menu beside the "Buy" button in iTunes Store, or
2. drag your song to your own Wish List album (i.e. an album you create with that name).
#1 method I have found to be incredibly frustrating:
a. It took my a long time to figure out how to access that WL (iT Help was silent about this).
Answer: from iTunes Store's home screen, hold mouse over your user name in upper right hand corner of home screen and an arrow for a drop-down list appears including Wish List. The resulting list had my new songs in it and a bunch that seemed to have come from iT8 (I maintained a "Shopping List album to back up my SL because periodically it became inaccessible and I had trouble getting Apple to reset it for me) but it is really unpleasant to use, especially if you have a lot of songs there. If you are trying to access the most recent songs added, it is especially cumbersome-- it's divided up into pages and the song list sub-window, within the main window, goes off the bottom of my iMac 24" screen. Therefoer, you have to scroll down to get to the song list sub-window and then scroll again within that sub-window because the song list's page isn't fully shown and you have to scroll down within it to even see all songs on that one page. Then, Worse yet, the song list is into multiple pages, each of which requires a click to see content. You cannot get an overview within your own WL. Even more frustrating, every time you buy a song, this awkward display reverts to the first line of the first page which causes you to have to go thru this whole process all over again. Ugh.
#2. The 2nd method of making your own Wish List album is better, but still requires you to deal with the awful scrolling window within a scrolling window. I can't get any large overview of the various arrangements of a song that I am searching for. iT9's approach makes me feel awkward and blind compared to iT8. To populate your WL album, you must individually drag each song into a relatively small album accurately and one at a time. This is a pain vs. just double clicking on it in iT8 to add it to my SC. Once you've got the songs you want in your WL, you can see and sort them much like you could in the old SC. So the real problem I'm encountering here is the basic way that iT9 is designed to display music search results-- what I call scrolling windows within scrolling windows. I tried using the view menu to make it the kind of sweeping view that iT8 offered, but nothing seemed to improve the view.
Has anyone else found a work-around to recover the functionality lost in replacing SC's with WL's? Any user tips would be greatly appreciated! I used to really enjoy perusing iT8 and comparing varying artists/arrangements of the same song and this has become really unpleasant in iT9. I love iOS4 for my iPhone 3G though and had to update to iT9 for that. Too bad there's such a trade-off required!SEBrew wrote:
Has anyone else found a work-around to recover the functionality lost in replacing SC's with WL's? Any user tips would be greatly appreciated! I used to really enjoy perusing iT8 and comparing varying artists/arrangements of the same song and this has become really unpleasant in iT9.
This was discussed ad nauseum when iTunes 9 first came out months ago. If you search the discussions (using the Search Discussions box above and to the right), you'll probably find some of the myriad threads on the subject.
Best of luck. -
#PARENT_TEXT# not being substituted in List Template since upgrade to v4.1
I have a list template that uses the substitution string #PARENT_TEXT# in the Sublist Template Before Rows section.
Prior to Apex 4.1 this substitution string was replaced with the parent list item text (as expected). In Apex 4.1 this substitution is not made and the result is blank.
Is #PARENT_TEXT# deprecated, or is this a bug? #PARENT_LIST_ITEM_ID# is replaced so looks like some substitution is being performed at least.
any ideas ?I've reproduced the problem on apex.oracle.com
Workspace: PARENT_TEXT
Username: [email protected]
Password: Muppet#1
Application Id: *48955*
The login page has 3 icons, each of which is a top-level entry within a static list.
When you click on the drop-down icon, the menu which appears should display the "Primary" or "Secondary" or "Tertiary" title in the menu which appears.
Oddly, if you select "Primary"...."1st child of Primary" then the title "1st child of Primary" appears as the menu title. Suggesting that there's a bug relating to root elements.
This did work on Apex 3.x which is why I raised the case.
regards,
Andy Steel. -
Is there a List of all Oracle R12 EBS Standard/Seeded Reports?
Hey,
Does anyone have a list of all Oracle R12_ EBS Seeded Reports in the system?
- Particularly for Finance and/or Purchasing modules
- Ideally with additional information and details regarding what each report contains (a general description or all the fields it includes).
I can only assume there should be a document that lists them all out by module, and includes details of each report. I dug through the document library, but was not able to find anything like that.
Even a list of report names per module would be nice?
If there is a perfect query that brings in the exact Active Report Names and associated Application Name / Module Name that would work too... (emphasis on perfect: Comprehensive, correct, and includes names of relevent Application and/or module)
Thanks,
-Ayyadtry the below to get the list.
"Concurrent Programs report"
"Concurrent Program Details report"
Also, here is the purchasing list
Reschedule Requisitions Purchasing
Location Listing Purchasing
New Vendor Letter Report Purchasing
Purchase Order Detail Report Purchasing
Vendors on Hold Report Purchasing
Receipt Adjustments Report Purchasing
Receiving Exceptions Report Purchasing
Savings Analysis Report(by Buyer) Purchasing
Purchase Order and Releases Detail Report Purchasing
Vendor Price Performance Analysis Report Purchasing
Buyer's Requisition Action Required Report Purchasing
Item Summary Listing Purchasing
Blanket and Planned PO Status Report Purchasing
Purchase Order Distribution Detail Report Purchasing
Purchase Price Variance Report Purchasing
Expected Receipts Report Purchasing
Matching Holds Report by Buyer Report Purchasing
Vendor Purchase Summary Report Purchasing
Unordered Receipts Report Purchasing
Standard Notes Listing Purchasing
Requisition Activity Register Purchasing
Buyer Listing Purchasing
Quality Code Listing Purchasing
RFQ Action Required Report Purchasing
Unit of Measure Class Listing Purchasing
Printed RFQ Report(Landscape) Purchasing
Printed RFQ Report(Portrait) Purchasing
Overshipments Report Purchasing
Purchasing Activity Register Purchasing
Encumbrance Detail Report Purchasing
Item Detail Listing Purchasing
Open Purchase Orders Report(by Cost Center) Purchasing
Purchase Agreement Audit Report Purchasing
Printed Purchase Order Report(Landscape) Purchasing
Printed Purchase Order Report(Portrait) Purchasing
Open Purchase Orders Report(by Buyer) Purchasing
Invoice Price Variance Report Purchasing
Printed Requisitions Report Purchasing
Purchase Requisition Status Report Purchasing
Receipt Traveler Purchasing
Substitute Receipts Report Purchasing
Purchase Summary Report By Category Purchasing
Overdue Vendor Shipments Report Purchasing
Quotation Action Required Report Purchasing
Requisition Distribution Detail Report Purchasing
Internal Requisition Status Report Purchasing
Cancelled Requisition Report Purchasing
Requisitions on Cancelled Order Report Purchasing
Internal Requisitions/Deliveries Discrepancy Report Purchasing
Vendor Volume Analysis Report Purchasing
Vendor Quality Performance Analysis Report Purchasing
Vendor Service Performance Analysis Report Purchasing
Printed Change Orders Report (Portrait) Purchasing
Cancelled Purchase Orders Report Purchasing
Purchase Order Commitment By Period Report Purchasing
Savings Analysis Report(by Category) Purchasing
Receiving Value Report by Destination Account Purchasing
Printed Change Orders Report (Landscape) Purchasing
Receiving Value Report Purchasing
Receiving Transactions Register Purchasing
Purchasing Database Adminstration Purchasing
Send Notifications for Purchasing Documents Purchasing
Upgrade Notifications To Release 11 Purchasing
Country of Origin (By Supplier) Report Purchasing
Country of Origin (By Item) Report Purchasing
Mass Update of Buyer Name on Purchasing Documents Purchasing
PO Output for Communication Purchasing
Purchasing Packing Slip Inventory
Accrual Reconciliation Load Run Bills of Material
Accrual Write-Off Report Bills of Material
Summary Accrual Reconciliation Report Bills of Material
Miscellaneous Accrual Reconciliation Report Bills of Material
AP and PO Accrual Reconciliation Report Bills of Material
Receipt Accruals - Period-End Bills of Material
Uninvoiced Receipts Report Bills of Material
Create Accounting - Receiving Bills of Material
Transfer Journal Entries to GL - Receiving Bills of Material -
I wnat to add new fieldtext in the alv list output plz tell me
hi,
i whant add new fieldtext in the list output, plz tell me where can i modify it.
CORRECTIONS
DATE CORRECTION NOTE AUTHOR DESCRIPTION
09.03.2001 L9CK045451 0388404 XSC Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud Wrong keydate for search with
Pchbegda and pchendda.
22.04.2004 S6BK024775 730486 PS Too many selection parameters in
header
19.06.2006 S6BK035494 956731 JF No sorting by qualification
REPORT RHPK_FIND_PERS_WITH_EXPIRED_QU MESSAGE-ID PQ.
DATA AUFRUF(8).
TABLES : OBJEC, GDSET.
DATA LIST.
DATA MARKFIELD(1) TYPE C.
ALV_POOL
TYPE-POOLS SLIS.
INCLUDES
INCLUDE .
INCLUDE RHPEINI0.
TABLES
DATA: orgeh_BUFFER like hrobject OCCURS 1 WITH HEADER LINE.
DATA: OBJECTS LIKE HRSOBID OCCURS 1 WITH HEADER LINE.
DATA: h_OBJEC LIKE objec OCCURS 0 WITH HEADER LINE.
DATA: pers_objects LIKE HRSOBID OCCURS 1 WITH HEADER LINE.
DATA: QUALI_TAB LIKE QUALI_PROF OCCURS 1 WITH HEADER LINE.
DATA: PERSONS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: H_PERSONS LIKE HRPE_PROFL OCCURS 1 WITH HEADER LINE.
DATA: LIST_OUTPUT LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: BOOK_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: PLAN_EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA H_SUITED LIKE DYNP_PCRIT-SUITED.
DATA: O_COLOR LIKE STREEATTR-COLOR.
DATA: O_INTENSIV LIKE STREEATTR-INTENSIV.
DATA SHOW_KEY.
DATA EVENT.
DATA: HTEXT LIKE P1000-STEXT.
DATA: EVENT_TAB LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: COLLECTED_EVENTS LIKE PERSQ_PROF OCCURS 1 WITH HEADER LINE.
DATA: SUBTY_TAB LIKE HRPE_OTYPE_SUBTY OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF HIDE_STRU,
PERSTYPE LIKE HROTYPE-OTYPE,
PERSOBID LIKE HRSOBID-SOBID,
PERSTXT LIKE PERSQ_PROF-STEXT,
SCALE_ID LIKE HRPE_PROFQ-SCALE_ID,
TRAININGTYPE LIKE HRP1000-OTYPE,
TRAININGID LIKE HRP1000-OBJID,
TRAININGSTXT LIKE HRP1000-STEXT,
QUALID LIKE QUALI_PROF-QUALID,
QUALTEXT LIKE QUALI_PROF-QUALSTXT,
END OF HIDE_STRU.
DATA: BEGIN OF EXTAB OCCURS 10,
FCODE LIKE RSMPE-FUNC,
END OF EXTAB.
DATA: CURRENT_QUALID LIKE QUALI_PROF-QUALID.
DATA: CURRENT_TRAININGSID LIKE HRP1000-OBJID.
DATA: CURRENT_TRAININGTYPE LIKE HRP1000-OTYPE.
DATA: SUBRC LIKE SY-SUBRC.
VARIABLES
DATA: OBJID LIKE P1000-OBJID.
DATA: H_LINE_COUNT TYPE I.
DATA: H_TABIX1 LIKE SY-TABIX.
ALV-Variables
DATA: alv_events_line TYPE slis_alv_event. "header line
DATA ALV_EVENTS TYPE SLIS_T_EVENT.
DATA GT_ALV_LIST_TOP_OF_LIST TYPE SLIS_T_LISTHEADER.
DATA: gt_events TYPE SLIS_T_EVENT.
DATA G_REPID LIKE SY-REPID.
DATA G_VARIANT LIKE DISVARIANT.
DATA ALV_USERCOMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA G_USERCOMMAND_FOR_RANKINGLIST TYPE SLIS_FORMNAME VALUE
'USER_COMMAND_FOR_RANKINGLIST'.
DATA ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: ALV_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
DATA: Help_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
begin of Dynpro 5020 - POPUP: WEITER
DATA: OK_CODE_5020 LIKE SY-UCOMM.
DATA: NO_ORG. "if no org selected
DATA: H_TABIX LIKE SY-TABIX.
begin of Dynpro 20nn - Header
TABLES: DYNP_RHPP.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-005.
PARAMETERS:
H_EVENTS LIKE DYNP_RHPP-GEN_TRAIN, "with training sugg
H_QUAL LIKE DYNP_RHPP-EXPIRED_QUAL. "with Qual
SELECTION-SCREEN END OF BLOCK B3.
INITIALIZATION
INITIALIZATION.
PERFORM READ_T77S0_PARAMETERS_FOR_PE.
get user parameters/Planvariante und Beginndatum setzen:
PCHOTYPE = $ORGEH.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
EXPORTING
FILL_IF_INITIAL = 'X'
IMPORTING
PLVAR = PCHPLVAR
BEGDA = PCHBEGDA
endda = Pchendda "Correction 0410219
WITH_KEY = SHOW_KEY
SUBSTITUTE =
ESSENTIAL = only_essential
ORG_UNIT = PCHOBJID-LOW
EXCEPTIONS
OTHERS = 0.
PCHBEGDA = LOW_DATE. "Correction note: 0410219 / AL0K023393
get menu text for key on/off
PERFORM USER_MENU_TEXT_KEY(SAPLRHP0) USING G_MENU_TEXT_KEY.
start-of-selection
START-OF-SELECTION.
terminate the selection if objid isn't given
READ TABLE PCHOBJID INDEX 1 TRANSPORTING NO FIELDS.
IF SY-SUBRC <> 0
AND PCHOBJID IS INITIAL.
PCHOBJID-SIGN = 'I'.
PCHOBJID-OPTION = 'EQ'.
PCHOBJID-LOW = '00000001'.
APPEND PCHOBJID.
NO_ORG = TRUE.
ELSE.
NO_ORG = FALSE.
ENDIF.
GET OBJEC.
terminate the selection if objid isn't given
IF NO_ORG = TRUE.
EXIT.
ENDIF.
OBJECTS-PLVAR = PCHPLVAR.
OBJECTS-OTYPE = PCHOTYPE.
OBJECTS-SOBID = OBJEC-REALO.
APPEND OBJECTS.
Für das lesen der Organisationseinheit
h_OBJEC-PLVAR = OBJEC-PLVAR.
h_OBJEC-OTYPE = OBJEC-OTYPE.
h_OBJEC-OBJID = OBJEC-objid.
append h_objec.
Read table h_objec index 1 transporting no fields.
if sy-subrc = 0.
Fill Buffer
orgeh_BUFFER = h_OBJEC.
orgeh_BUFFER[] = h_OBJEC[].
CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
TABLES
OBJECTS = orgeh_BUFFER.
Loop at h_OBJEC.
H_TABIX = SY-TABIX.
Read text of organisation
CALL FUNCTION 'RH_READ_OBJECT'
EXPORTING
PLVAR = h_OBJEC-plvar
OTYPE = h_OBJEC-otype
OBJID = h_OBJEC-OBJID
IMPORTING
OBEG = h_objec-begda
OEND = h_objec-endda
SHORT = short
STEXT = h_OBJEC-stext
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
modify h_OBJEC index H_TABIX.
ENDIF.
endloop.
endif.
end-of-selection
END-OF-SELECTION.
read objects of the organizational unit
OBJID = OBJECTS-SOBID.
CALL FUNCTION 'RHPH_PICK_UP_PERSONS'
EXPORTING
BEGDA = PCHBEGDA "Correction 0410219
ENDDA = PCHENDDA "Correction 0410219
STATUS = '1'
WITH_STEXT = 'X'
TABLES
OBJECTS = OBJECTS
PERSONS = H_PERSONS
EXCEPTIONS
UNDEFINED = 1
OTHERS = 2.
IF SY-SUBRC = 0.
prepare objects !
objects-otype = h_persons-ttype.
objects-sobid = h_persons-tobid.
append objects.
ELSE.
EXIT.
ENDIF.
CLEAR OBJECTS. REFRESH OBJECTS.
prepare sel_objects !
pers_objects-PLVAR = PCHPLVAR.
LOOP AT H_PERSONS.
pers_objects-OTYPE = H_PERSONS-TTYPE.
pers_objects-SOBID = H_PERSONS-TOBID.
APPEND pers_objects.
ENDLOOP.
sort objects and delete adjacent duplicates
SORT Pers_OBJECTS BY PLVAR OTYPE SOBID.
DELETE ADJACENT DUPLICATES FROM Pers_OBJECTS COMPARING PLVAR OTYPE
SOBID.
CALL FUNCTION 'RHPK_FIND_PERS_WITH_EXPIRED_Q'
EXPORTING
PLVAR = PCHPLVAR
CHECK_BEGDA = PCHBEGDA
CHECK_ENDDA = PCHENDDA
SUBTY = $ownsb "'B032'
only_essential =
target_otype =
target_ap_iea =
TABLES
IMP_PER_TAB = pers_objects
QUALI_TAB = QUALI_TAB
PERSONS = LIST_OUTPUT
altq_tab =
EXCEPTIONS
NO_QUALIFICATION = 1
NO_PERSON_FOUND = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
100% case
READ TABLE pers_objects INDEX 1 TRANSPORTING NO FIELDS.
IF SY-SUBRC = 0.
sort pers_objects by otype sobid.
check the selected persons: if org.unit was selected !
Loop at pers_objects.
H_TABIX = SY-TABIX.
READ TABLE LIST_OUTPUT WITH KEY OTYPE = pers_objects-OTYPE
SOBID = pers_objects-SOBID
BINARY SEARCH.
IF SY-SUBRC <> 0.
person doesn't belong to the selected org.unit
DELETE LIST_OUTPUT INDEX H_TABIX.
ENDIF.
ENDLOOP.
ENDIF. "org.unit check needed ?
end-of-selection.
sort h_objec by otype objid.
sort list_output by otype sobid.
sort h_persons by ttype tobid.
ALV-Liste aufbauen
loop at h_objec.
loop at h_persons where otype = h_objec-otype "XSC
and sobid = h_objec-objid. "XSC
Read table list_output with key
otype = h_persons-ttype
sobid = h_persons-tobid
binary search.
if sy-subrc = 0.
h_tabix1 = sy-tabix.
while sy-subrc = 0.
clear alv_output. "XSC
ALV_OUTPUT-otype = h_objec-otype.
ALV_OUTPUT-sobid = h_objec-objid.
ALV_OUTPUT-stext = h_objec-stext.
ALV_OUTPUT-Ptype = LIST_OUTPUT-otype.
ALV_OUTPUT-pobid = LIST_OUTPUT-sobid.
ALV_OUTPUT-pshort = LIST_OUTPUT-short.
ALV_OUTPUT-ptext = LIST_OUTPUT-stext.
ALV_OUTPUT-qualid = LIST_OUTPUT-qualid.
ALV_OUTPUT-qualstxt = LIST_OUTPUT-qualstxt.
ALV_OUTPUT-expbegda = LIST_OUTPUT-vbegda.
ALV_OUTPUT-expendda = LIST_OUTPUT-vendda.
PERFORM FIND_TRAINING TABLES QUALI_TAB EVENT_TAB COLLECTED_EVENTS
USING $PLVAR $GDATE H_EVENTS H_QUAL.
IF NOT EVENT_TAB[] IS INITIAL.
READ TABLE COLLECTED_EVENTS WITH KEY
QUALID = LIST_OUTPUT-QUALID.
IF SY-SUBRC = 0.
ALV_OUTPUT-ICON_S_EVENTS = ICON_BOOKEVENT.
endif.
ENDIF.
Append ALV_OUTPUT.
h_tabix1 = h_tabix1 + 1.
READ TABLE list_output INDEX h_tabix1
COMPARING otype sobid.
endwhile.
endif.
endloop.
endloop.
check if indicator for qualification view is set
IF h_qual = 'X'. "note 956731
SORT alv_output by qualid OTYPE SOBID ptype pobid "note 956731
expbegda expendda. "note 956731
ELSE. "note 956731
SORT alv_output by OTYPE SOBID ptype pobid qualid expbegda expendda.
ENDIF. "note 956731
DELETE ADJACENT DUPLICATES FROM ALV_OUTPUT COMPARING OTYPE SOBID ptype
pobid qualid expbegda expendda.
stext_AQ und icon-Feld noch nicht gefüllt
perform PREPARE_TOP_OF_LIST.
perform Build_FIELDCAT using GT_FIELDCAT[] H_EVENTS.
perform ALV_LAYOUT USING alv_layout.
G_REPID = SY-REPID.
G_VARIANT-REPORT = G_REPID.
PERFORM EVENTTAB_BUILD USING GT_EVENTS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = 'X'
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = ALV_USERCOMMAND
I_STRUCTURE_NAME = 'HRPDV_EXPIRED_Q'
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT = G_VARIANT
IT_EVENTS = GT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ALV_OUTPUT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form FIND_TRAINING
text
-->P_QUALI_TAB text
-->P_EVENT_TAB text
-->P_$PLVAR text
-->P_GDATE text
-->P_H_EVENT text
-->P_H_QUAL text
FORM FIND_TRAINING TABLES P_QUALI_TAB STRUCTURE QUALI_TAB
P_EVENT_TAB STRUCTURE EVENT_TAB
P_COLLECTED_EVENTS STRUCTURE COLLECTED_EVENTS
USING VALUE(P_$PLVAR) LIKE P1000-PLVAR
VALUE(P_GDATE) LIKE P1000-GDATE
VALUE(P_H_EVENT) TYPE ANY
VALUE(P_H_QUAL) TYPE ANY.
IF NOT P_H_EVENT IS INITIAL.
READ TABLE EVENT_TAB INDEX 1 TRANSPORTING NO FIELDS.
IF SY-SUBRC <> 0.
CLEAR P_EVENT_TAB. REFRESH EVENT_TAB.
CLEAR P_COLLECTED_EVENTS. REFRESH P_COLLECTED_EVENTS.
IF EVENT = FALSE.
EVENT = TRUE.
ELSE.
EVENT = FALSE.
ENDIF.
CALL FUNCTION 'RHPH_FIND_TRAINING_FOR_QUAL'
EXPORTING
PLVAR = PCHPLVAR
GDATE = SY-DATUM
GET_NAME = 'X'
TABLES
QUALI_TAB = QUALI_TAB
TO_Q_TAB = EVENT_TAB
EXCEPTIONS
NO_QUALIFICATION = 1
NO_OBJECT_FOUND = 2
TECHNICAL_ERROR = 3
OTHERS = 4.
IF SY-SUBRC = 0.
the found qualifications are picked up into table event_tab
ENDIF.
IF SY-SUBRC = 1.
MESSAGE S015. "Zu den Eingaben wurden keine Daten gefunden
ENDIF.
IF SY-SUBRC > 2.
EXIT.
ENDIF.
collect events when there are double.
Veranstaltungen kollektieren, Können mehrfach auftauchen, da
verschiedenen Qualifikationen von gleichen Veranstaltungen vermittelt
LOOP AT P_EVENT_TAB INTO P_COLLECTED_EVENTS.
APPEND P_COLLECTED_EVENTS.
ENDLOOP.
SORT P_COLLECTED_EVENTS BY QUALID STEXT.
ENDIF.
ENDIF.
ENDFORM. " FIND_TRAINING
*& Form PREPARE_TOP_OF_LIST
text
--> p1 text
<-- p2 text
FORM PREPARE_TOP_OF_LIST.
DATA ALV_TOP_OF_LIST TYPE SLIS_LISTHEADER. "typ, key, info
DATA STEXT LIKE HRPDV_SUCCESSOR_VIEW-TTEXT.
DATA P_SUBRC LIKE SY-SUBRC.
DATA P_STEXT LIKE T777O-OTEXT.
DATA l_tabix like sy-tabix value 0.
DATA: h_counter TYPE i. "note 730486
ALV_TOP_OF_LIST-TYP = 'H'.
ALV_TOP_OF_LIST-INFO = TEXT-REQ.
APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
Organisationseinheit
ALV_TOP_OF_LIST-typ = 'S'.
Read text for organisationunit
PERFORM READ_TEXT_OTYPE_T777O(SAPLRHP0) USING SY-LANGU $ORGEH
P_STEXT P_SUBRC.
ALV_TOP_OF_LIST-key = P_STEXT.
fill buffer for read organisation-text
CALL FUNCTION 'RH_TEXT_BUFFER_FILL'
EXPORTING
CHECK_STRU_AUTH = 'X'
WITH_EXTINT = ' '
TABLES
OBJECTS = OBJECTS.
loop at objects for multipleselection
clear h_counter. "note 730486
LOOP AT OBJECTS.
$OBJID = OBJECTS-SOBID.
CALL FUNCTION 'RH_READ_OBJECT'
EXPORTING
PLVAR = OBJECTS-PLVAR
OTYPE = OBJECTS-OTYPE
OBJID = $OBJID
IMPORTING
SHORT = short
STEXT = STEXT
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF h_counter >= 15. "note 730486
MOVE '( ... )' TO ALV_TOP_OF_LIST-INFO. "note 730486
APPEND ALV_TOP_OF_LIST TO gt_alv_list_top_of_list.
"note 730486
EXIT. "note 730486
ENDIF. "note 730486
CONCATENATE $ORGEH OBJECTS-SOBID STEXT INTO
ALV_TOP_OF_LIST-INFO SEPARATED BY SPACE.
APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
CLEAR ALV_TOP_OF_LIST.
ALV_TOP_OF_LIST-typ = 'S'.
l_tabix = l_tabix + 1.
ADD 1 TO h_counter. "note 730486
ENDLOOP.
CLEAR ALV_TOP_OF_LIST.
ALV_TOP_OF_LIST-TYP = 'S'.
ALV_TOP_OF_LIST-key = TEXT-003.
WRITE PCHBEGDA TO ALV_TOP_OF_LIST-INFO.
APPEND ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
clear ALV_TOP_OF_LIST-INFO.
ALV_TOP_OF_LIST-key = TEXT-004.
WRITE PCHENDDA TO ALV_TOP_OF_LIST-INFO.
Append ALV_TOP_OF_LIST TO GT_ALV_LIST_TOP_OF_LIST.
ENDFORM. " PREPARE_TOP_OF_LIST
*& Form BUILD_FIELDCAT
text
-->P_GT_FIELDCAT[] text
FORM BUILD_FIELDCAT USING P_GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV
P_H_EVENTS.
DATA: WA_FIELDCAT LIKE LINE OF P_GT_FIELDCAT.
DATA: P_REPNAME LIKE SY-REPID,
L_TABIX LIKE SY-TABIX. "local variable for sy-tabix.
P_REPNAME = SY-REPID.
Erstellen des Feldkataloges
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = P_REPNAME
I_INTERNAL_TABNAME =
I_STRUCTURE_NAME = 'HRPDV_EXPIRED_Q'
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = PRONAME
CHANGING
CT_FIELDCAT = P_GT_FIELDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 0
PROGRAM_ERROR = 0
OTHERS = 0.
LOOP AT P_GT_FIELDCAT INTO WA_FIELDCAT.
l_tabix = sy-tabix.
CASE WA_FIELDCAT-FIELDNAME.
when 'OTYPE'.
WA_FIELDCAT-DDICTXT = 'L'.
when 'SOBID'.
WA_FIELDCAT-DDICTXT = 'L'.
WHEN 'STEXT'.
WA_FIELDCAT-DDICTXT = 'L'.
when 'PTYPE'.
WA_FIELDCAT-DDICTXT = 'L'.
when 'POBID'.
WA_FIELDCAT-DDICTXT = 'L'.
when 'PSHORT'.
WA_FIELDCAT-DDICTXT = 'L'.
WHEN 'PTEXT'.
WA_FIELDCAT-DDICTXT = 'L'.
WHEN 'QUALID'.
WA_FIELDCAT-DDICTXT = 'L'.
WHEN 'QUALSTXT'.
WA_FIELDCAT-DDICTXT = 'L'.
WHEN 'EXPBEGDA'.
WA_FIELDCAT-DDICTXT = 'L'.
WHEN 'EXPENDDA'.
WA_FIELDCAT-DDICTXT = 'L'.
WHEN 'ICON_S_EVENTS'.
IF P_H_EVENTS IS INITIAL.
WA_FIELDCAT-NO_OUT = 'X'.
else.
WA_FIELDCAT-DDICTXT = 'X'.
endif.
ENDCASE.
MODIFY P_GT_FIELDCAT FROM WA_FIELDCAT INDEX l_tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCAT
*& Form ALV_LAYOUT
text
-->P_L_ALV_LAYOUT text
FORM ALV_LAYOUT USING P_ALV_LAYOUT TYPE slis_layout_alv.
build layout
P_LAYOUT-BOX_FIELDNAME = 'MARK_X'. "fieldname for checkbox
P_ALV_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
P_ALV_LAYOUT-BOX_TABNAME = ALV_OUTPUT. "tabname for checkbox
p_ALV_layout-info_fieldname = 'ALV_COLOR'.
ENDFORM. " ALV_LAYOUT
FORM eventtab_build USING
FORM EVENTTAB_BUILD USING RT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-NAME.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
APPEND LS_EVENT TO RT_EVENTS.
ENDFORM. "EVENTTAB_BUILD
*FORM TOP_OF_PAGE
FORM TOP_OF_PAGE. "#EC CALLED
NEW-PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = GT_ALV_LIST_TOP_OF_LIST[].
ENDFORM. "TOP_OF_PAGE
FORM USER_COMMAND *
USER_COMMAND for the list of successor view *
--> r_ucomm *
--> rs_selfield *
FORM USER_COMMAND USING ALV_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD. "#EC CALLED
DATA: SELECTED_LINE LIKE HRPDV_expired_q.
DATA: SOBID_QUA LIKE P1000-OBJID.
DATA: LT_PERS_TAB LIKE HRSOBID OCCURS 0 WITH HEADER LINE.
CASE ALV_UCOMM.
WHEN '&IC1'. "per Doppelklick auswählen
READ TABLE ALV_OUTPUT INDEX
RS_SELFIELD-TABINDEX INTO SELECTED_LINE.
CASE RS_SELFIELD-FIELDNAME.
WHEN 'POTYPE' or 'POBID' or 'PTEXT' or 'OTYPE' or 'SOBID' or
'STEXT' or 'QUALID' or 'QUALSTXT' or 'EXPBEGDA' or 'EXPENDDA'.
READ TABLE ALV_OUTPUT INDEX RS_SELFIELD-TABINDEX INTO
Help_output.
IF SY-SUBRC <> 0.
MESSAGE S027. "Bitte gültige Zeile auswählen
EXIT.
Endif.
IF ALV_OUTPUT-SOBID IS INITIAL.
MESSAGE S015. "Zu den Eingaben wurden keine Daten gefunden
ELSE.
converte the variable because of the different types
SOBID_QUA = SELECTED_LINE-SOBID_QUA.
CALL FUNCTION 'RHPP_SHOW_PROFILE'
EXPORTING
PLVAR = pchplvar
OTYPE = SELECTED_LINE-PTYPE "XSC
OBJID = SELECTED_LINE-POBID "XSC
BEGDA = PCHBEGDA
ENDDA = PCHENDDA
MAINTAIN = ' '
EXCEPTIONS
NO_AUTHORITY = 1
NOT_FOUND = 2
OTHERS = 3.
CASE SY-SUBRC.
WHEN 0.
All right.
WHEN 1.
MESSAGE S015.
Zu Ihren Eingaben konnten keine Daten gefunden werden!
WHEN 2.
MESSAGE E000.
Dazu haben sie keine berechtigung!
WHEN OTHERS.
MESSAGE E008.
Es ist ein unvorhergesehener Fehler aufgetreten.
ENDCASE. "sy-subrc.
CLEAR ALV_OUTPUT.
ENDIF. "IF ALV_OUTPUT-SOBID IS INITIAL.
CLEAR ALV_OUTPUT-SOBID.
when 'ICON_S_EVENTS'.
IF SELECTED_LINE-ICON_S_EVENTS IS INITIAL.
MESSAGE S027. "Bitte gültige Zeile auswählen
EXIT.
ENDIF.
CLEAR LT_PERS_TAB.
REFRESH LT_PERS_TAB.
LT_PERS_TAB-PLVAR = pchPLVAR.
LT_PERS_TAB-OTYPE = SELECTED_LINE-PTYPE. "XSC
LT_PERS_TAB-SOBID = SELECTED_LINE-POBID. "XSC
APPEND LT_PERS_TAB.
SOBID_QUA = SELECTED_LINE-QUALID.
CALL FUNCTION 'RHPP_SHOW_SUGGEST_EVENTS'
EXPORTING
P_PLVAR = pchPLVAR
P_SOBID_QUA = SOBID_QUA
P_PROFCY_REQ = SELECTED_LINE-RATING_REQ
P_GDATE = sy-datum
TABLES
EVENT_TAB =
PERS_TAB = LT_PERS_TAB.
endcase.
CLEAR SELECTED_LINE.
ENDCASE. "case sy-ucomm
CLEAR SY-UCOMM.
ENDFORM. "USER_COMMANDPls be more specific in your question. If you want to include an extra field in your alv output, then read the field catalog table you created through "Reuse_alv_fieldcatalog_merge" and then add an extra entry in it giving the details of the field you want to add.. and then call the "resuse_alv_grid_display",
Hope this helps. To be able to help you in a better way, kindly revert with any specific issue.
Reward if helpful,
Karan -
ICal Print List Hang / Font Issue / Sync Problems...
Okay, here's a couple issues all wrapped up into one thread/post - reason is cause I suspect they may all be tied together somehow, but am not sure.
Sync Problems...
Regarding the Syncing problems, you can find an ongoing thread about @ http://forums.markspace.com/viewtopic.php?t=1632
In short, some of us are having issues with events syncing to our Palm to the wrong timezone, causing them to be an hour off (usually within the new & old DST date change). Yes, all the usual fixes have been tried - pls read the thread noting "adairnet" and ymatto" postings.
Also, in addition to this time issue, I have iCal events that I've deleted in iCal still show up on the Palm after one-way syncing!
Print List Hang...
Every week I print a "list" of events from a certain calendar. The past couple weeks I noticed some lines in the notes field printing on top of each other. Twas odd indeed, but I hadn't had the time to look into the reason. Then this week I was going thru my usual printing proceedure and now iCal locks up, hangs up, crashes, forcing me to force-quit the program. It's usually after I extend the dates beyond 2 or 3 days, but I've not been able to find a consistency. I've redone events thinking they were corrupt with no success.
Font Problems...
After the Print List issue above, I opened my Console program to see if it was reporting anything. At first it indicated that it could not find Helvetica Neue and would substitute it for Helvetica. This put me in touch with some font corruption - so I got rid of those bad fonts and activated Helvetica Neue which got rid of that message. But made me wonder if there are more font problems causing the print hanging & syncing problems. I have FontAgent Pro and do have some font issues that I'm trying to work out.
But the Console is displaying another string of messages every time the Print List proceedure hangs up which I cannot figure out...
2007-04-24 16:24:54.151 iCal[28975] NSATSGlyphStorage inconsistency. Cannot find run storage for character range {138 67} for CTRun 0xDBE87D0. Ignoring the run...
2007-04-24 16:24:55.175 iCal[28975] -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:] called with out-of-bounds range. For apps linked on Tiger this will raise an exception. For earlier apps it will produce this one-time warning and continue with existing behavior (which is undefined).
2007-04-24 16:24:55.176 iCal[28975] * NSThread: ignoring exception '* -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:]: Range or index out of bounds' that raised during delayed perform of target 0xdde58d0 and selector 'renderPreview'
So, all of this is causing me to wonder if the iCal or SyncServices database is corrupt. Is there a way to dig into the iCal db and check for corruption &/or fix it?
Or does anybody have any further suggestions on any of these issues?
thanx.jason.RedKamel,
The SyncServices folder should be avoided like "a swarm of bees". This article discusses some of the issues that can arise when the SyncServices folder is deleted or modified:
http://docs.info.apple.com/article.html?artnum=301920
Data loss and Data corruption can result from deleting or modifying the SyncServices folder, and that data loss or corruption can be propogated to devices, .Mac, and other applications that sync with SyncServices.
If you have isolated an issue with the other steps in your post, I would recomend speaking with AppleCare before removing that folder.
Hope this helps,
Nathan C. -
Assigning a value to a substitute variable
Hi, I would like to know if it is possible to assign a value to a substitute variable.
This is what I'm doing:
- Prompting user for input
ACCEPT uom CHAR PROMPT 'Enter number of UOM system you would like: ' DEF '0'
(displayed list of options are numbers 0-5)
- Based on input, open corresponding file
(start i:\utc\all\oracle\uom\uom_column_heading_&&uom..sql)
Problem:
- Default selection is 0, meaning use the CURRENT UOM system (a number, 1-5)
- That being said, &&uom must be assigned a 1-5 value in order to open the file that corresponds to the CURRENT UOM system
Let me know if any additional information is needed.
Thanks!I apologize for the format. I tried to make it more legible, but was not able to. FYI: It appears to be easier to read in "Edit" view.
Thanks, I tried the &&uom := your_function(); suggestion, but I am getting an error. It looks like the "value" of &&uom is being read in the assignment statement, not the variable name.
I have copied the piece of the code, for your reference.
ACCEPT uom CHAR PROMPT 'Enter number of UOM system you would like: ' DEF '0'
DECLARE
v_uom_sys_selection NUMBER;
v_curr_uom_sys VARCHAR2 (50);
v_uom_num NUMBER;
BEGIN
v_uom_sys_selection := to_number(&uom);
v_curr_uom_sys := EG.GET_CURRENT_UOM();
v_uom_num := eg.get_user_selected_uomnum(v_curr_uom_sys);
&&uom := to_char(v_uom_num);
dbms_output.put_line('v_uom_num = ' || v_uom_num);
dbms_output.put_line('&&uom = ' || &&uom);
END;
--prompt "&&uom"
start i:\utc\all\oracle\uom\uom_column_heading_&&uom..sql
Below are the results I get when commenting out the &&uom := to_char(v_uom_num); line. NOTE: the "value" of &&uom = 0.
v_uom_num = 1
0 = 0
If I leave that line in, I get the following error:
PLS-00103: Encountered the symbol "0" when expecting one of the following:
begin case declare end exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge pipe
The symbol "<an identifier> was inserted before "0" to continue.
Message was edited by:
user449676 -
Since I updated my itunes I can no longer burn a playlist to disc using MP3 format. I clicked on converting the songs to mp3 format but they still won't burn to disc. The computer says it is checking media and then stops.
same problem. Im using itunes version 10.6.3, I converted wavs burnt from cd, to mp3 using itunes, these were NOT PURCHASED from itunes, and when I try to burn an mp3 cd using the new mp3 files, they convert to wavs before my eyes every time i create a new playlist of the mp3. The mp3 revert to wav within less than 30 seconds. As if itunes is saying, let me help, I substitute the higher quality 1411 wav files for you. And of course, now they wont burn to mp3, because "they must be converted to mp3 first" before burning.
But every list of the mp3 version of the files keeps reverting to 1411 wav files?
WHats going on? Thanks -
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are
Vendor batch No. : Transaction ZJPMPU322
(Background)
There are "vendor batch" and "batch" fields in Goods-in-order and Goods-in-plan lists (transaction ZJPMPU322). Values for these fields are retrieved from inbound delivery document (transaction VL33N). After core 7.0 upgrade, "vendor batch" is not copied from "batch" in inbound delivery document any more so that nothing appears in the vendor batch field in the lists.
(Change request)
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are retrieved from "batch" in inbound delivery document ONLY IF "vendor batch" is blank in the inbound delivery document.
(Current design)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN
(If there is no record in LIPS, blank will be printed out for both fields)
(After change)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN only if LIPS-LICHN is not blank.
If LIPS-LICHN is blank, vendor batch is retrieved from LIPS-CHARG.
(If there is no record in LIPS, blank will be printed out for both fields. If both LIPS-CHARG and LIPS-LICHN are blank, blank will be printed out for both fields),
Following is the program:
REPORT zjpmrpu322 MESSAGE-ID zjpm001
NO STANDARD PAGE HEADING
LINE-COUNT 50
LINE-SIZE 255.
*& Development ID: PU_DD_322_LJP *
*& Report : ZJPMRPU322 *
*& The Purpose of this program is to print the Goods-in-order list *
*& and the Goods in plan list for raw materials, materials purchase *
*& etc at the Sasayama plant, Japan. *
*& Change Log: *
*& Init Who Date Text *
*& PV P V R S Varma 07-May-2003 Initial Version *
*& DU D.Usui 2004/02/26 CR No. 1432 *
*& DU D.Usui 2004/03/08 CR No. 1447 *
*& DU D.Usui 2004/05/06 CR No. 1591 *
Constants
CONSTANTS:
c_werks LIKE ekpo-werks VALUE 'JP01', "Plant code - Sasayama plant
c_id LIKE thead-tdid VALUE 'F02', "Text ID for Info record
c_object LIKE thead-tdobject VALUE 'EKPO',"Object of text for info rec
*c_zzjp_r1 LIKE marc-zzjp_re1 VALUE 'GMP', "Goods in plan- Domestic
*c_zzjp_r2 LIKE marc-zzjp_re1 VALUE 'GMPI', "Import sales order document
c_plus TYPE c VALUE '', "Holding '' sign
c_spras LIKE makt-spras VALUE 'J', "Language key Japan
*c_device(7) type c value 'PRINTER', "Device type
c_form(16) TYPE c VALUE 'ZJPMPU305', "Form name
c_ele_gmp(4) TYPE c VALUE 'GMP', "GMP Text element
c_ele_gmpi(4) TYPE c VALUE 'GMPI', "GMPI Text element
add begin CR1432
c_ele_bgmp(4) TYPE c VALUE 'BGMP', "BGMP
c_ele_bgmpi(5) TYPE c VALUE 'BGMPI', "BGMPI
add end CR1432
c_function(3) TYPE c VALUE 'SET', "Function
c_type(4) TYPE c VALUE 'BODY', "Window area in main window
c_win_head(7) TYPE c VALUE 'HEADING', "Heading window
c_win_shead(7) TYPE c VALUE 'SUBHEAD', "sub heading window
c_win_fot1(7) TYPE c VALUE 'FOOTER1', "Footer 1 window
c_win_main(4) TYPE c VALUE 'MAIN', "Main window
c_comd(8) TYPE c VALUE 'NEW-PAGE', "New-page command
c_zar TYPE ekko-bsart VALUE 'ZAR',
c_x TYPE c VALUE 'X', "Indicator for print options
c_f TYPE c VALUE 'F', "Indicator for Purchase Order
add begin CR1591
Deletion indicator in purchasing document
c_loekz(1) TYPE c VALUE 'L',
For ranges tables
c_sign_i(1) TYPE c VALUE 'I', "Sign(include)
c_op_eq(2) TYPE c VALUE 'EQ', "Option(=)
Confirmation category
c_ebtyp_ab(2) TYPE c VALUE 'AB', "Order acknowledgment
add end CR1591
c_la(2) TYPE c VALUE 'LA'. "Indicator for Inbound deliver
Database Tables
Vaiables / Internal tables *
Internal table to store PO information
Not used after CR1591
DATA: BEGIN OF t_purc OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
charg LIKE eket-charg, "Batch number
matnr LIKE ekpo-matnr, "Material code
werks LIKE ekpo-werks, "Plant
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
END OF t_purc.
Internal table to store material description.
DATA: BEGIN OF t_makt OCCURS 0,
matnr LIKE makt-matnr, "Material code
maktx LIKE makt-maktx, "Material description
END OF t_makt.
Internal table for storage of final EKET data
DATA: BEGIN OF t_eket OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
ebelp_ex(6) TYPE n, "Extended ebelp with length 6
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
dabmg LIKE ekes-dabmg, " Delivered Quantity
charg LIKE eket-charg, "Batch number
matnr LIKE ekpo-matnr, "Material code
werks LIKE ekpo-werks, "Plant
maktx LIKE makt-maktx, "Material Description-- jp check
etens LIKE ekes-etens, "Sequence Number
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
vpnam(40) TYPE c, "Vendor product name
END OF t_eket.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE ekes-eindt, "Item delivery date
menge LIKE ekes-menge, "Scheduled Quantity
dabmg LIKE ekes-dabmg, " delivered quantity
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
mark TYPE c,
END OF t_ekes.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes_temp OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE ekes-eindt, "Item delivery date
menge LIKE ekes-menge, "Scheduled Quantity
END OF t_ekes_temp.
Internal table for storing data from MLGN table.
DATA: BEGIN OF t_mlgn OCCURS 0,
matnr LIKE mlgn-matnr, "material code
lhmg1 LIKE mlgn-lhmg1, "Standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of measure
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
END OF t_mlgn.
Internal table for storing data from MARM table.
DATA: BEGIN OF t_marm OCCURS 0,
matnr LIKE marm-matnr, "material code
umrez LIKE marc-zzjp_cas_size, "Std package unit
meins LIKE ekpo-meins, "alternate unit
END OF t_marm.
Internal table for storing data from MARC table.
DATA: BEGIN OF t_marc OCCURS 0,
matnr LIKE marc-matnr, "Material code
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
END OF t_marc.
Internal table for storing data from lfa1 table.
DATA: BEGIN OF t_lfa1 OCCURS 0,
lifnr LIKE lfa1-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
END OF t_lfa1.
Internal table for Storing data from LIPS table.
DATA: BEGIN OF t_lips OCCURS 0,
vbeln LIKE lips-vbeln, "Delivery document no
posnr LIKE lips-posnr, "Item number for Delivery document
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
END OF t_lips.
Internal table for storing the final display data.
DATA: BEGIN OF t_display OCCURS 0,
g_checkbox type c, "check box for selection of records
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
vpnam(40) TYPE c, "Vendor product name
lifnr LIKE ekko-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
umrez LIKE marc-zzjp_cas_size, "Std package unit
meinh LIKE ekpo-meins, "alternate unit
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
std_pac_no(13) TYPE n, "Std receipt package no
tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
vbeln like ekes-vbeln, "Goods-in-order
vbelp like ekes-vbelp, "Item
add end CR1447
END OF t_display.
Internal table for storing the final display data -Goods in order list
DATA: BEGIN OF t_display1 OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
vpnam(40) TYPE c, "Vendor product name
lifnr LIKE ekko-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
umrez LIKE marc-zzjp_cas_size, "Std package unit
meinh LIKE ekpo-meins, "alternate unit
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
std_pac_no(13) TYPE n, "Std receipt package no
tot_std_pt(13) TYPE n, "Total no of std pallets
END OF t_display1.
Internal table for storing the final display data - Goods in plan list
DATA: BEGIN OF t_display2 OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
vbeln like ekes-vbeln, "Goods-in-order
vbelp like ekes-vbelp, "Item
add end CR1447
END OF t_display2.
add begin CR1591
RANGES: r_matnr FOR mara-matnr, "for p_matnr
r_ebeln FOR ekpo-ebeln. "for p_ebeln
add end CR1591
DATA: line TYPE i. " line number
DATA: g_checkbox TYPE c. "check box for selection of records
DATA: g_tab LIKE sy-index. "variable to hold index
DATA g_tabix LIKE sy-tabix. "holder for table index
Printing Options.
DATA: lw_pr_options LIKE itcpo.
*lw_pr_options-tddest = 'SA03'. " Print Device Name
lw_pr_options-tdpreview = 'X'. " Print Preview
lw_pr_options-tdnewid = 'X'. " New Request
lw_pr_options-tdlifetime = 2. " Retention in Spool
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
SELECT-OPTIONS:
s_date FOR sy-datum DEFAULT sy-datum. " Search period.
PARAMETERS:
p_matnr LIKE mara-matnr, " Material code
p_ebeln LIKE ekpo-ebeln. " Purchase Document No
SELECTION-SCREEN END OF BLOCK blk1.
Selection Screen Checks *
AT SELECTION-SCREEN.
IF ( s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Entry Must in atleast one of the Fields'(t00).
ENDIF.
IF ( NOT p_matnr IS INITIAL ) AND
( s_date IS INITIAL ) AND
( p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del begin CR1591
This check is not found in original FS
IF ( NOT p_matnr IS INITIAL ) AND
( s_date IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del end CR1591
Validations for Data selection *
del begin CR1591
Waste check
IF ( NOT s_date IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
PERFORM f_check_date_in_eket.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
PERFORM f_check_date_in_eket.
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
PERFORM f_check_date_in_eket.
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
( NOT s_date IS INITIAL ) AND
( p_matnr IS INITIAL ).
PERFORM f_check_date_in_eket.
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
( s_date IS INITIAL ) AND
( p_matnr IS INITIAL ).
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
del end CR1591
Data selection from Tables *
START-OF-SELECTION.
SET PF-STATUS 'SELECT'.
add begin CR1591
Set ranges tables
PERFORM set_ranges.
add end CR1591
mod begin CR1591
**Selection of PO data from EKET into internal table t_purc.
PERFORM f_select_eket.
**Selection of corresponding PO data for EKET from EKES into t_ekes.
PERFORM f_select_ekes.
**Selection of material desc from MAKT table into T_makt.
PERFORM f_select_makt.
**Copy the contents of t_purc and t_makt into t_eket table.
PERFORM f_move_eket.
**Replace the corresponding entries of t_eket with t_ekes.
PERFORM f_update_eket.
Selection of PO data from EKET into internal table T_EKET.
PERFORM f_select_eket2.
Selection of corresponding PO data from EKES appending to T_EKET.
PERFORM f_select_ekes2.
Selection of material desc from MAKT table into T_MAKT.
PERFORM f_select_makt2.
mod end CR1591
*Selection of vendor product name.
PERFORM f_select_vpnam.
del begin CR1591
No need
**copy t_eket-ebelp into temporary variable.
PERFORM f_copy_ebelp.
del end CR1591
*selection of data from MLGN table into t_mlgn internal table
PERFORM f_select_mlgn.
*selection of data from marm table into t_marm internal table
PERFORM f_select_marm.
*selection of data from marc table into t_marc internal table
PERFORM f_select_marc.
*selection of data from lfa1 table into t_lfa1 internal table
PERFORM f_select_lfa1.
*Selection of data from LIPS table into t_lips internal table
PERFORM f_select_lips.
del begin CR1591
Don't display list screen when no data exists
*END-OF-SELECTION.
del end CR1591
*lines = sy-linno - 1.
*Collection of data into the final display internal table t_Display
PERFORM f_collect_final.
*Display the contents of t_display as a simple List
PERFORM f_list_display.
AT USER-COMMAND.
PERFORM f_select_layout.
INCLUDE zjpmipu315.
INCLUDE zjpmipu316.
*& Form f_check_MATNR_in_plant
This Routine is to check if the the selected material code is
available in the plant 'JP01'.
FORM f_check_matnr_in_plant.
DATA: l_matnr LIKE mara-matnr.
SELECT matnr UP TO 1 ROWS FROM marc
INTO l_matnr
WHERE
matnr = p_matnr AND
werks = c_werks.
ENDSELECT.
IF l_matnr IS INITIAL.
MESSAGE e000 WITH
'The material is not available in '(t02) c_werks 'plant'(t20).
ENDIF.
ENDFORM. " f_check_MATNR_in_plant
*& Form f_check_EBELN_in_EKPO
This Routine is to check if the Purchase order number selected
is existing or not and if it exists, check if it is related to
the plant 'JP01'.
FORM f_check_ebeln_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
INTO l_ebeln
WHERE
ebeln = p_ebeln AND
werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
MESSAGE e000 WITH
'PO not available or not related to '(t03) c_werks 'plant'(t21).
ENDIF.
ENDFORM. " f_check_EBELN_in_EKPO
*& Form f_check_matnr_in_ekko
This routine is to check if any PO exist for the selected
Material code.
FORM f_check_matnr_in_ekpo.
DATA: l_matnr LIKE ekpo-matnr.
SELECT matnr UP TO 1 ROWS FROM ekpo
INTO l_matnr
WHERE
matnr = p_matnr.
ENDSELECT.
IF l_matnr IS INITIAL.
MESSAGE e000 WITH
'PO does not exist for the material no'(t04) p_matnr.
ENDIF.
ENDFORM. " f_check_matnr_in_ekpo
*& Form f_check_date_in_eket
This routine is to check if any purchase order exists
with the selected
FORM f_check_date_in_eket.
DATA: l_eindt LIKE eket-eindt.
SELECT eindt UP TO 1 ROWS FROM eket
INTO l_eindt
WHERE
eindt IN s_date.
ENDSELECT.
IF l_eindt IS INITIAL.
MESSAGE e000 WITH
'No PO exist with the selected delivery date '(t05).
ENDIF.
ENDFORM. " f_check_date_in_eket
*& Form f_check_werks_in_ekpo
This Routine is to check if the selected purchase order
is associated with the plant JP01
FORM f_check_werks_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
INTO l_ebeln
WHERE
werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
MESSAGE e000 WITH
'The selected P0 is not relevant to '(t06) c_werks 'plant'(t22).
ENDIF.
ENDFORM. " f_check_werks_in_ekpo
*& Form f_select_eket
Routine to collect data from EKET, EKPO, MAKT, EKKO tables
using inner join and store the data into internal table
t_PURC. The data selection is based on the selection screen's
input.
FORM f_select_eket.
IF ( NOT s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~matnr = p_matnr AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~matnr = p_matnr AND
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ENDIF.
IF sy-subrc <> 0.
MESSAGE s000 WITH 'Data not found'(t07).
LEAVE LIST-PROCESSING.
ELSE.
SORT t_purc.
ENDIF.
ENDFORM. " f_select_eket
*& Form f_select_makt
Routine to select the material description for all the
materials present in T_purc table
FORM f_select_makt.
DATA: l_t_makt(4) TYPE c VALUE 'MAKT'.
SELECT
matnr
maktx
FROM
makt
INTO TABLE t_makt
FOR ALL ENTRIES IN t_purc
WHERE
matnr = t_purc-matnr AND
spras = c_spras.
IF sy-subrc <> 0.
MESSAGE s000 WITH
'Relevant data not found in'(t09) l_t_makt 'table'(t23).
ELSE.
SORT t_makt.
ENDIF.
ENDFORM. " f_select_makt
*& Form f_move_eket
Routine to join data in T_PURC and T_MAKT tables into
internal table T_MAKT.
FORM f_move_eket.
LOOP AT t_purc.
t_eket-ebeln = t_purc-ebeln.
t_eket-ebelp = t_purc-ebelp.
t_eket-eindt = t_purc-eindt.
t_eket-menge = t_purc-menge.
t_eket-charg = t_purc-charg.
t_eket-matnr = t_purc-matnr.
t_eket-werks = t_purc-werks.
t_eket-meins = t_purc-meins.
t_eket-lifnr = t_purc-lifnr.
READ TABLE t_makt WITH KEY matnr = t_purc-matnr
BINARY SEARCH.
IF sy-subrc = 0.
t_eket-maktx = t_makt-maktx.
ENDIF.
APPEND t_eket.
CLEAR t_eket.
ENDLOOP.
ENDFORM. " f_move_eket
*& Form f_select_ekes
Routine to select EKES data for all corresponding entries
of T_EKET.
FORM f_select_ekes.
DATA: l_tabix TYPE i.
IF NOT s_date IS INITIAL.
SELECT
ebeln
ebelp
etens
eindt
menge
INTO TABLE t_ekes
FROM
ekes
WHERE
eindt IN s_date.
ELSE.
DESCRIBE TABLE t_purc LINES l_tabix.
IF l_tabix GT 0.
SELECT
ebeln
ebelp
etens
eindt
menge
dabmg
vbeln
vbelp
FROM
ekes
INTO TABLE t_ekes
FOR ALL ENTRIES IN t_eket
FOR ALL ENTRIES IN t_purc
WHERE
ebeln = t_purc-ebeln AND
ebelp = t_purc-ebelp AND
eindt IN s_date.
AND ebeln eq p_ebeln.
and matnr in p_matnr.
ENDIF.
CLEAR l_tabix.
IF NOT s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ELSEIF NOT s_date IS INITIAL AND p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ELSEIF s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ENDIF.
IF sy-subrc = 0.
SORT t_ekes.
ENDIF.
IF NOT t_ekes[] IS INITIAL.
t_ekes_temp[] = t_ekes[].
SORT t_ekes_temp BY ebeln ebelp.
DELETE ADJACENT DUPLICATES FROM t_ekes_temp COMPARING ebeln ebelp.
LOOP AT t_ekes_temp.
READ TABLE t_purc WITH KEY ebeln = t_ekes_temp-ebeln
ebelp = t_ekes_temp-ebelp.
IF sy-subrc NE 0.
CLEAR t_purc.
SELECT SINGLE
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO CORRESPONDING FIELDS OF t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~ebeln = t_ekes_temp-ebeln
AND eket~ebelp = t_ekes_temp-ebelp
AND ekpo~elikz NE c_x
AND ekko~bstyp EQ c_f
AND ekko~bsart NE c_zar.
IF sy-subrc EQ 0.
APPEND t_purc.
CLEAR t_purc.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH: t_ekes_temp, t_ekes.
CLEAR: t_ekes_temp, t_ekes.
Once the header is filled up get the details from EKES
SELECT ebeln ebelp etens eindt menge dabmg vbeln vbelp
INTO TABLE t_ekes
FROM ekes
FOR ALL ENTRIES IN t_purc
WHERE ebeln EQ t_purc-ebeln.
Mark the entries as 'X' which falls in the date range
LOOP AT t_ekes.
IF t_ekes-eindt IN s_date.
t_ekes-mark = 'X'.
MODIFY t_ekes INDEX sy-tabix TRANSPORTING mark.
ENDIF.
ENDLOOP.
SORT t_ekes BY ebeln ebelp ASCENDING mark DESCENDING.
Delete the entries from eket if no entries in EKES falls in the period
LOOP AT t_purc.
l_tabix = sy-tabix.
READ TABLE t_ekes WITH KEY ebeln = t_purc-ebeln
ebelp = t_purc-ebelp.
IF sy-subrc EQ 0.
IF t_ekes-mark NE 'X'.
DELETE t_purc INDEX l_tabix.
ENDIF.
ENDIF.
ENDLOOP.
delete the entries from EKES which do not fall in the specified period
DELETE t_ekes WHERE mark NE 'X'.
ENDFORM. " f_select_ekes
*& Form f_update_eket
Routine to substitute relevant t_eket entries with that of
t_ekes entries.It does not modify the remaining entries for
for which the corresponding values in t_ekes doesnot exist.
FORM f_update_eket.
DATA: BEGIN OF lt_temp_eket OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
dabmg LIKE ekes-dabmg, " Delivered quantity
matnr LIKE ekpo-matnr, "Material code
maktx LIKE makt-maktx, "Material Description-- jp check
etens LIKE ekes-etens, "Sequence Number
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
charg LIKE eket-charg, " Batch number Added by PD 08/08/03
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
END OF lt_temp_eket,
l_menge LIKE ekes-menge.
LOOP AT t_eket.
LOOP AT t_ekes WHERE ebeln = t_eket-ebeln
AND ebelp = t_eket-ebelp.
Added by PD 08/08/03
MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
MOVE t_eket-ebeln TO lt_temp_eket-ebeln.
MOVE t_eket-ebelp TO lt_temp_eket-ebelp.
MOVE t_eket-meins TO lt_temp_eket-meins.
CLEAR l_menge.
l_menge = t_ekes-menge - t_ekes-dabmg.
IF l_menge LE 0.
CONTINUE.
ELSE.
MOVE l_menge TO lt_temp_eket-menge.
ENDIF.
MOVE t_ekes-eindt TO lt_temp_eket-eindt.
MOVE t_ekes-etens TO lt_temp_eket-etens.
MOVE t_eket-lifnr TO lt_temp_eket-lifnr.
MOVE t_eket-maktx TO lt_temp_eket-maktx.
MOVE t_eket-matnr TO lt_temp_eket-matnr.
MOVE t_ekes-vbeln TO lt_temp_eket-vbeln.
MOVE t_ekes-vbelp TO lt_temp_eket-vbelp.
APPEND lt_temp_eket.
CLEAR lt_temp_eket.
CLEAR t_ekes.
ENDLOOP.
IF sy-subrc NE 0.
Added by PD 08/08/03
MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
MOVE t_eket-ebelnDear
Problem No 1 : we are working in a process industries with three plants each of them have three order type. we have define MRP group in "OPPR" then assign each MRP group to Orde types in "OPPE". Now the problem is whn i convert plan order in process order for any material systme automaticaly pick the order type PIi01.
Answer :
1.Please check the OPPR -Plant and MRP group -Select Order Type Button -Check what Order Type you have assinged here ( PI01( May be the default Process Order Type )
2.If you are maintaing MRP group ( 0001 or 0002) , did you asisng the same in MRP1 view ?? because
3.Did you maintain the similar Order type in OPKP -Define Production Scheduling Profile ? -This has highest priority .
4.Did you maintain correct order type in OPJH-Maintain Order Type ??
Refer the expert comments on the same issue : Strategy group to define production order type
Problem No 2: 2nd Problem is system system is not creating plan order for prrevios dates. say i enter PIR for month of november from first november to 30th november and run MRP on 29th the sytem create plan order on 30th of november with exception message 30.
Answer : You can plan the order in back dated , if you maitain Satrt date in the Past optiuon in OPU3/OPU5-Define Scheduling parameters .Goto OPU3 -Select the Order Type -Double click -Maintain 90-60 days in the Start Date in the past in Scheduling Control and Details scheduling tab .
Hope it helps
regards
JH -
Hi,
I forgot my security questions and I don't have a rescue email setup.
I serached the internet and the only solution I found for that is to call apple. The proble is there is no phone to call, they have to call you and there is a list of countries.
I live in Lebanon and it does not appear in the list of countries listed for apple customer support call.
How can I reset the security questions.
thank youThe Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
In Safari Preferences, Safari is not listed as a Browser.
Yesterday, Safari's icon disappeared from the dock after I started the program (it bounced and then the "applications" icon stood in as the substitute icon).
When I click on the non-Safari icon, Safari starts up like normal and everything runs smooth.
Problem encountered: In Safari Preferences, under General: Default Web Browser, it does not list Safari (other web browsers are offered).
Currently, when I read my NetNewsWires and click on a link, one of these other web browsers opens up. I prefer Safari and I would like it back. I have browsed the Apple discussions and I have erased the icons folder and I have repaired permissions, but to no avail. Please help.Hello Matthew:
Welcome to Apple discussions.
You might try to trash the safari preference file. Close Safari. Trash com.apple.safari.plist. Restart and enter your personal preferences.
Barry -
Regarding Tcode S_ALR_87013018 List:Total Plan/Actual/Commitments
Hi All,
I have to write a Z Report which will be substitute of the transaction S_ALR_87013018(List:Total Plan/Actual/Commitments.) and need to add 2 new columns in the output of the current transaction.
I am stuck up for the logic of retrieving the following columns in the output list by providing the value of internal order/order group on the selection screen :-
1) Overall plan---The overall summary plan value for the life of the order.
2) Actual----
Total expenditures recorded against an internal order.
3) Commitment-Total commitment recorded against an internal order.
Please provide me the logic and table names from where I can retrieve these values on the basis of internal order numbers.
Your responses are appreciated.
Regards,
AmitanshuHi,
As far as I can see all three columns you have mentioned are included in standard report. So why donu2019t you simply copy report 6OPL-001 to your own report via TA GRR1.
Btw, you should also create your own report group as it is not advisable to include customer specific reports in SAP standard report groups.
With best regards
Karl
Maybe you are looking for
-
Hello I will explain the scenario: In our java web page, we are using three text boxes to enter "Part number,Description and Aircraft type". Every time the user no need to enter all these data. The person can enter any combination of data or only one
-
My imac takes a long time to go to sleep.
I have a 27 inch iMac (circa 2010) OS 10.8.5 / 2.06GHz Intel Core 2 Duo / 4GB memory. When I select SLEEP MODE it takes 30 seconds to go to sleep. It also seems to wake up all on its own?! Any ideas as to how I can get it to sleep instantly like it u
-
Scheduled scenarios not working
Hi everyone, I have created and configured ODI agent as Java EE Application successfully as mentioned below: http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/setup_jee_agent/setup_jee_agent.htm The test is successful. Now I a
-
I got problem with hdcp for my ATV 3
I cannot play the video that I rented from apple store
-
Hi All, There is a problem that iam unable to get all condition type. geting only one record it as to fecth all condition types code is... *select Sales Document: Header Data and Item Data from vbak and vbap select avbeln aerdat aernam aauart avkorg