Success with Calendar Order

I have seen a lot of posts on this forum about problems with the iPhoto services (calendars, cards, books, etc.). I read a lot of these before ordering one for my mom for Christmas, and it made me skeptical about buying. But, I did anyway and I just wanted to say that it came out perfect. All of the photos came out crystal clear with awesome color. It looked exactly like the digital copy. Some even had the yellow "!" mark, but I ignored it because most of the pictures were taken with a Nikon DSLR or a Canon PowerShot; both nice cameras. I can't wait to see her reaction on Christmas when she opens the sleek packaging
In short, I just wanted to give some props to Apple for once again amazing me with their products. I wanted to give a little positive note to those who are thinking about ordering a calendar, to reassure them that they will most likely be satisfied even through all of the negative reviews on this site.
Hope this helps By the way, I have iPhoto 6 on a MacBook Pro.

I too had great success with a calendar and book order. The calendar was a present for my mum but, the only downside of it was, when she saw the Apple logo on the box, she thought I had bought her a laptop!

Similar Messages

Problems with Calendar order from iPhoto

I've tried twice to create a calendar out of iphoto and I've gotten a response via email after several days that there was a problem with the order:
Apple discovered an issue with the file you submitted. It appears the
calendar has small month names. As a result, Apple is unable to process
your order and you will not be charged.
We recommend updating your software, changing the theme on your print
product, then changing it back to the original theme.
Once completed, preview your print product in iPhoto, and place the
order again.
For instructions on how to update your software, refer to:
Mac OS X - Updating your software
<http://support.apple.com/kb/ht1338>
For instructions on how to change your theme, refer to:
iPhoto - How do I change the theme or type of my book, card, or
calendar?
<http://support.apple.com/kb/HT1850>
For instructions on how to preview your order, refer to:
How to preview an order in iPhoto or Aperture
<http://support.apple.com/kb/HT1040>
We appreciate your business and apologize for any inconvenience.
There are no updates for my OS or iPhoto. I changed themes and went back to the original (and had to rebuild it all over again, grrrr). Any ideas what could be causing this?
So much for getting these for Christmas presents. Thanks!

Dear Martha,
I had the same problem, and this bug in iPhoto cost me my yearly christmas presents for all of our families (grandparents, aunts, uncles etc.)
By digging through this forum, I found the solution that actually worked for me.
But I will not order the calendars from Apple because they cancelled the calendars three times without telling me what the problem was, and endless and numerous calls with different support people at Apple gave no solution.
I will now export PDFs and send them to a different service.
Maybe in your case there is another project.db file?
Sometimes, when iPhoto rebuilds databases, it seems that it creates a second one.
(I read it here somewhere in the forum - so I hope this could be a good hint to follow)
All the best,
Martin

Order by in MATERIALIZED VIEW not work successfully with first column (ID)

Dears,
I am trying to create a Materialized View as below:
CREATE MATERIALIZED VIEW HR.MV_EMP
PCTFREE 10
MAXTRANS 255
TABLESPACE users
STORAGE (
INITIAL 65536
MINEXTENTS 1
MAXEXTENTS 2147483645
BUILD IMMEDIATE
REFRESH ON DEMAND
AS
SELECT *
FROM employees
where rownum < 5000 order by employee_id desc ;But while querying the MATERIALIZED VIEW, it did not work successfully as the data did not appear in the accurate order.
I tried to create the same MATERIALIZED VIEW but order by another column (Column Date), it worked successfully and the data appeared in the accurate order.
It means that MATERIALIZED VIEW not work successfully with the first column (id).
Can you please help me in this ?
Thanks & regards,,

A few pointers :
1. As has been pointed out, the ROWNUM has been incorrectly placed. ROWNUM values are assigned as rows are fetched from the source before the ORDER BY. You need to ORDER BY first (in a SubQuery) and then ROWNUM afterwards (outside the SubQuery).
2. I wonder why you want only the last 5000 EMPLOYEE_IDs. What if Employee_ID 1 is still an active employee (he is the founder, first employee and CEO ?). There could be very many "low" EMPLOYEE_IDs that are still active.
3. Logically I would expect some filter other than the ROWNUM ... ORDER BY to be used to select candidate rows. Then, an ORDER BY in the CREATE query would be unnecessary.
4. When querying the Materialized View you must explicitly ORDER BY (irrespective of whether you did or did not do an ORDER BY in the CREATE ...)
5. How do you expect to refresh the MV ? Will it always be a COMPLETE Refresh ? Remember that your "5000 employees" filter would likely exclude older employees at the next refresh. If you use some other filter, it should be consistent across all refreshs.
Hemant K Chitale

Issue with Calendar not syncing with iPhone 3g

Issue with Calendar not syncing with iPhone 3g.
Solution
Create backup of your entire mailbox before starting (THIS IS IMPORTANT)
Create offline folder (.pst file) Check windows help on how to do this for your version.
Open folders view on Outlook
Right click on Calendar in tree view and 'copy to' offline .pst folder
Go back to main calendar view and delete all entries in your calendar.
Create simple cal entry and sync test with iphone
If this works then start dragging cal entries back from the offline folder into the main calendar then sync after each step....
I moved events in this order
-Yearly recurrences (ie Birthdays)
- Monthly recurrences
- weekly recurrences
- Daily recurrences
All appointments from the beginning of this year >> to the end of time!
If all these sync then the issue is with an older cal item and you have to decide if you actually need these in you current calendar.
I chose to leave these in the offline cal and if i need access them from there.
If at any point the sync fails then you know you have a corrupt cal entry in the block you just transferred. Move the offending items back into the offline folder and try again in smaller chunks until you identify the offending items and delete them and manually recreate them in your real calendar.
Also smart to run the inbox (.pst /.ost ) repair tools for your OS/Outlook version.
Fixed so far
XP Pro / Outlook 2008
XP Pro /Outlook 2003

I just updated the firmware to iPhone 2.0.1 and the syncing works great both ways.

There was a problem with your order.

I am trying to order CreativeCloud subscription (using upgrade option) but I keep getting an error "There was a problem with your order." after credit card is beeing processed. I tried it for several times but no success. My card details were entered correctly, card isnt expired and limit isnt exceeded.
Any ideas what could be wrong?
Thanks,
Stanislav

Hi Svizual,
Are you still facing the issue?
-Dave

Success with adding an external eSATA drive to a Verizon FIOS DVR

August 4, 2012 - Success with adding an external eSATA drive to a Verizon FIOS DVR
I just upgraded from a Comcast DVR to a Verizon FIOS DVR. I upgraded because my old DVR was limited to 500GB (1/2 TB) on the internal drive and the new FIOS DVR allowed for a much larger external eSATA drive. Selecting a viable external drive for the FIOS DVR was easier said than done. The three drives listed on the Verizon web site as compatible with FIOS DVRs are no longer manufactured by western digital and are not available on the market.
The DVR that I received from Verizon was a Cisco "CHS 435 HD DVR" that came with a 500GB (1/2 TB) internal drive. This is one of their "Multi-Room DVRs" that allows other set top boxes (not DVRs) to watch videos recorded on it.
I selected a western digital "WD30EURS" eSATA disk drive because it was a follow on product to one of the three listed as acceptable by Verzion on their web page and it was 3TB in size. I ordered from amazon.com for $170.99. This drive is a "bare drive" so it does not come with an external encloser or a eSATA cable.
According to the Western Digial web site this is a AV-GP drive: "These drives are designed to last in high temperature always-on, streaming digital audio/video environments such as PVR/DVR, IPTV, and video surveillance systems."
http://www.wdc.com/wdproducts/library/AAG/ENG/2178-771131.pdf
I got a "Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD" to hold the drive for $34.39. I chose this one because it does not use a fan that could cause continious noise. The box is made out of metal so it cools itself as long as it is exposed to air (not covered up). This box comes with an external power supply that has a small transformer that plugs into a wall outlet.
Then I needed a eSATA cable. I got a "StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)" for $6.50 and a 3-foot version for $5.90. I went with the longer one so that the cable would be less likely to become accidentally unplugged if I need to move the drive or the DVR. The cables and the drive houseing came from the same Amazon provider so it saved me on shipping. The drive came from Amazon/Western Digial directly but they do not have external housings or eSATA cables on that site.
The total cost was $255.56 including shipping for all these items.
I went with the largest (3TB) drive from western digial's AV-GP line to avoid a future upgrade from a smaller drive to a larger drive. There is no way to copy videos from one external eSATA drive to another drive because they are formatted by the FIOS DVR in a propriatary format. That would mean that any future upgrade would require losing all recorded files during an upgrade. That also means that there is no way to back up the contents of the drive to protect yourself from hard drive failure.
The installer who setup the DVR did not want me to plug in the drive while he was there and explained that I was on my own when I attached this kind of personal device to the DVR. When I plugged in the new eSATA drive it was automatically discovered. I was asked by the DVR if I wanted to format the new drive. I answered yes and within 2 hours the drive completed formatting. I did not watch the boring format so it could have finished faster.
When I started recording new videos they go directly to the external drive automatically and avoids the internal drive. It had no trouble recording two HD shows and playing a recording at the same time. I now have 20 hours of HD video recorded and the 3TB external drive is 17% full. So far my experience with the external drive has been great. No problems or issues. Learning the new remote control, new DVR menu system, and web browser control of the DVR from a laptop is another story. It will take some time to figure out how to make all the new features work.
It took me a while to figure out how to make this work since the verizon web site made useless suggestions and pointed me to products that are not available any more. I could not tell if this really would work until I plugged it in and then I was pleasantly suprised that it did. I have had this working for 3 days without any issues. I hope this post makes it easier for you to add an external eSATA drive to your DVR.
Here are the three items ordered from Amazon to make this work:
Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Driv...
Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD
StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)

You are right. I can only access 2TB of my 3TB external drive. That gives me a total of 2.5 TB counting the internal (0.5 TB) and external (2.0 TB) drives. This is a significant improvement over the just the 0.5 TB internal drive. I have not been able to find a reason for this limitation. Cisco and Verizon do not mention any limits that I can find. I hope that a future BIOS upgrade could provide access to more space but this would probably require me to reformat the drive and lose everything recorded.
I paid $170.99 for the 3 TB WD30EURS drive at amazon. I could have gotten away with spending only $116.99 for the 2 TB WD20EURS drive. Not worth returning at this point so I will stay with it. Makes me glad I didn't buy the most expensive 6 TB external monster drive available from another company.
I bought: 3TB drive: Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Drive WD30EURS by Western Digital
I could have bought: 2TB drive: Western Digital AV-GP 2 TB SATA II Intellipower 64 MB Cache Bulk/OEM Internal Hard Drive - WD20EURS by Western Digital
Details of what I learned:
The external 2 TB drive now has 41 hours of HD video recorded and claims to be 34% full (66% free). My estimate would allow me to have aprox 120 hours of HD on the external drive (2TB) and 30 hours of HD on the internal drive (500GB) for a total of 150 hours of HD. This will keep me happy for the near future.
There is a hidden "diagnostic menu" that is not normally accessible or documented by CISCO or Verizon. This menu has a lot of interesting info on the inner working of the DVR. There was an obscure reference to this menu on another forum.
To access this diagnostics menu:
1) Get the DVR into normal live tv mode (no menu, no guide, no pause ...)
2) Go to the Cisco CHS 435 HD DVR (not the remote control) and press these buttons on the front of the DVR: Press both the Left Arrow "<-" button and "OK" button at the same time and hold them both down for aprox 5 seconds.
3) The "Verizon FiOS TV Diagnostics Menu" menu will appear. The menu can then be used by the remote control.
4) I chose "D03 Memory / HDD" and then "Hard Disk Information" and finally "OK"
A five page disk report appeared. With a little bit of interpretation I discovered:
The Internal Drive is know as "drive 1/hdc1" has 461 GB total space with 454 GB free.
The External Drive is split into two partitions "hdc2" and "hdc3" (aka two mount points).
"drive 2/hdc2" has 1007 MB total with 317 GB free
"drive 3/hdc3" has 1007 MB total with 974 GB free
The normal DVR menu has an "Eject" feature that allows you to stop the external drive and make it safe to remove it from the DVR without losing anything via an unplanned drive removal. This can be found at "DVR" button on remote then "Settings"->"External Hard Drive"->"Eject".

Error with calendar database: Program version 4.2 doesn't match enviroment

hi!
im instaling jes in a windows 2000 machine and i get this error when trying to start calendar:
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Information: Log created (1156170958)
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: Sun Java System Calendar Server 6 2005Q4 (built Dec 27 2005) csadmind starting up
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind attempting to open Counters Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind successfully opened the Counters Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: HTTP Module is refreshing
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind is refreshing
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind is refreshed
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: HTTP Module has refreshed
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind argc=1 argv[0]=C:\Sun\CalendarServer\bin\csadmind.exe
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind attempting to open Calendar Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Error: caldb: Error with calendar database: Program version 4.2 doesn't match environment version
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Error: caldb: caldb_InitializeEnvironment: dbenv->open returned 22
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Critical: Fatal error 70: Cannot open calendar database
anyone have faced same problem?
thanks in advance

Hi Vyacheslav,
its wierd that when I run db_stat on windows, for my environment, it works.... I installed Berkeley DB XML 2.4.16 from a self extracting package.
When I tried running from my Linux box, the error message appear... The native library on my Linux box was built from the zip package dbxml-2.4.16.zip
Arent they the same?
Thanks!

Problem with the order of inserted PDFs...

I work with archiving records in chronological order and am having problems getting the files to insert correctly. When I go to insert files, everything is fine when only one file is being inserted. Also what works fine is if I'm trying to insert multiple files that are already in order (by using the Shift key to select them all at the same time) - i.e. file1, file2, file3 - and I know that I can select the last one first to invert the order - i.e. file3, file2, file1. The problem I'm having is if I'm trying to insert file3, file1, then file2 without having to do multiple insertions. Obviously this isn't a issue when dealing w/ 3 out of order, but not 10+. I have tried using the Control key to select them in order but the order is ALWAYS messed up when I hit OK.
Thanks to anyone that can solve my problem.
-Lance

Don't think there is anything you can do about that, unless you write a script or something. The ordering is typically set by the way they appear, not the order you select them. Some people have more success dragging from Explorer into Acrobat, rather than using insert pages. However, you are still stuck with the order the of the files in the window, not the order you select them. To the best of my knowledge, there is no way to change this behavior. Using a script are such is the only way I can think that what you want might be done.

ORA-24344: Success with compilation error.

Hi, i got the following error notification mail when the DB job [runs only once in a day at 1 AM] tries to execute the following procedure.
The mail reads like this ----
"Condition Raised in: toll_partitions.recompile_invalid_objects
Short Desc: ORA-24344
Long Desc: ORA-24344: Success with compilation error.
Cause: Trigger creation did not successfully complete.
Solution: Check trigger status for all triggers created in this schema and find out which error caused the failure by querying the user_errors table for the named trigger and Trigger type.
--- end of mail ----
=== This is the procedure =====
PROCEDURE recompile_invalid_objects IS
-- Declare variables
v_ins_str VARCHAR2(2000);
cursor_handle NUMBER;
execute_feedback NUMBER;
v_unix_str VARCHAR2(200);
     v_object_cnt NUMBER := 0;
     -- Declare cursor objects
     CURSOR curs_obj IS
SELECT decode( OBJECT_TYPE, 'PACKAGE BODY',
'ALTER PACKAGE ' || OWNER||'.'||OBJECT_NAME || ' COMPILE BODY',
'ALTER ' || OBJECT_TYPE || ' ' || OWNER||'.'||OBJECT_NAME || ' COMPILE' )
               "COMP_OBJECT"
FROM dba_objects
WHERE STATUS = 'INVALID'
AND OBJECT_TYPE IN ( 'PACKAGE BODY', 'PACKAGE', 'FUNCTION', 'PROCEDURE',
          'TRIGGER', 'VIEW' )
AND OWNER = USER
          AND OBJECT_NAME NOT LIKE 'TOAD_PROFILER'
ORDER BY OWNER, OBJECT_TYPE, OBJECT_NAME;
BEGIN
     -- Set Package/Procedure Name for email notification.
     vFacility := cProcName || '.recompile_invalid_objects';
-- Select invalid object count
BEGIN
     SELECT count(*)
          INTO v_object_cnt
          FROM dba_objects
WHERE STATUS = 'INVALID'
AND OBJECT_TYPE IN ( 'PACKAGE BODY', 'PACKAGE', 'FUNCTION', 'PROCEDURE',
          'TRIGGER', 'VIEW' )
AND OWNER = USER
               AND OBJECT_NAME NOT LIKE 'TOAD_PROFILER'
ORDER BY OWNER, OBJECT_TYPE, OBJECT_NAME;
          -- Recompile invalid objects
          IF v_object_cnt > 0 THEN
          FOR i in curs_obj
               LOOP
               v_ins_str := i.COMP_OBJECT;
                    cursor_handle := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(cursor_handle,
     v_ins_str,
               DBMS_SQL.V7);
execute_feedback := DBMS_SQL.EXECUTE(cursor_handle);
DBMS_SQL.CLOSE_CURSOR(cursor_handle);
COMMIT;
               END LOOP;
          END IF;
END;
EXCEPTION
     WHEN OTHERS THEN
     -- Log error condition and generate email notification if needed.
toll_handle.error_condition(vFacility, toll_handle.get_ora_desc(sqlerrm),vErrorID);
     END recompile_invalid_objects;
==== end of procedure ====
I got '0' count when I ran the invalid object count to see the invalid objects. I ran the following code ..and it gave me 0 value.
SELECT count(*)
          FROM dba_objects
WHERE STATUS = 'INVALID'
AND OBJECT_TYPE IN ( 'PACKAGE BODY', 'PACKAGE', 'FUNCTION', 'PROCEDURE',
          'TRIGGER', 'VIEW' )
AND OWNER = USER
               AND OBJECT_NAME NOT LIKE 'TOAD_PROFILER'
ORDER BY OWNER, OBJECT_TYPE, OBJECT_NAME;
--- end of query ---
The count 0 means, there are no invalid objects. But it throws daily the same error notification mail at 1 AM[the time job runs]. I compiled the procedure and it reports no errors. I checked the status of the triggers and all are valid and enabled. Please suggest me. Any help in this regard will be of great help to me. Thanks in advance...

Just some hints. I'm not sure if they help solving your problem.
1) Don't COMMIT inside a cursor.
2) Instead of DBMS_SQL you could use DBMS_DDL.ALTER_COMPILE, also see here: http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_ddl2.htm#1000604
3) Check if there are other jobs running during the recompile. Maybe you run into some conflicts.
4) Output the statement that creates the error. It looks like you could try to put this into your exception handler: toll_handle.error_condition(vFacility, v_ins_str,vErrorID);

Profit center substitution with internal order when generating GL doc from

Profit center substitution with internal order when generating GL doc from MM
Dear expert,
Please advise how to substitute successfully the profit center by which user-exit via FI substitution function.
Substitutions have been set for profit centers in FI via t-code OBBH, but the profit center will always be determined from the internal order when posting from MM subcon goods receipt
Thanks
James
Edited by: Yun-Chung Yung on Jun 3, 2010 10:46 PM

Hi,
SAP give note 539421 - Dummy profit center with cost center
account assignment. Looks applicable for your case.
Solution:
With the attached modification, you can restore the function from Release
3.1: The directly assigned profit center remains and is not overwritten
with the dummy profit center of the cost center.
The problem is not caused by a program error in this case. The profit
center is always derived from the existing CO account assignment even if
this is the dummy profit center (see also Note 62417).
This note applicable from release 40 until 605
I hope this can help you. FYI, in my case, i do not create dummy profit centre, then profit centre working as sap priority.
Regards,
Dewi

Successful implementation of Order Management r.11i.

We are looking for successful implementation of Order Management
r.11i in Europe.
If you provide us with any inforamtion about such projects,we
will be thankful to you.
We need to refer on such successful project in order to convince
our customer to start Order management Implementation.
Please contact me via e-mail
[email protected]

Revathi,
check the how to papers -> inventory in
http://sapbwneelam.blogspot.com/2007/09/lo-extraction.html
also you can look into http://sap.seo-gym.com/inventory.pdf

Calendar order - error every time!

I'm trying to order a calendar. I click buy now, it assembles, sends, all fine! I receive an email every time: A problem with your order! It cannot be processed.
They give me a number of options - to check if the upload did not work, however, that always seems to work just fine, no interruptions that I notice?
Then - not enough disk space on my mac - I have 82 GB - can't be the problem.
Check RGB - all photos are RGB colorspace - two different profiles depending on camera used - he profile name for some is Camera RGB Profile, and for others is sRGB IEC61966-2.1
Have previewed the calendar, and it assembles just fine into PDF format, all beautiful.
BUT I JUST CAN'T SEEM TO GET THE ORDER IN!
Can anyone recommend a solution?

nobody?

Calendar ordering failed but charged my credit card!

I created a calendar with iPhoto (running on latest version of Lion). I started the ordering process. I was taken to a screen to sign in to my apple account and to verify the charge for the calendars (ordered 2 of them). I submitted the order. Then a screen said oops, the Apple store was temporarily unavailable!
I checked my bank account, and sure enough, Apple charged me for the calendars. But on my account there is no order number or any other sign of the order actually having gone through. I'm pretty sure -- never ordered through iphoto before -- that my pictures weren't uploaded to apple to create the calendars.
I'm wondering how to get a refund?

Some Game purchases require a CC...
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Any success with Apple Customer Relations?

I was wondering if anyone has had any success with getting a refund for their over-14-day-old hi-res powerbooks by calling Apple Customer Relations? Between the audio looping, lines on display, loud hard drive, and warped case, I'm fed up.
Please share your experiences. Thanks.

I ordered just before 10am Eastern, had the Oct 5th Date, but my status changed to Shipped yesterday, and I can track it on UPS.
Hope yours come through soon. Good Luck!

Service order creation using bapi with repair order number

Hi experts,
Pls suggest me a BAPI to create a service order for those repair orders where a PGR has been done(for return delivery type : LR).
The plant should be 0260 with storage location wh01 and item category ZRRE
Creation of a service order with repair order type SM03 is not allowed in iw31.
thanks and regards,
Vijayb.

Hi prakash,
Thank u for the BAPI
But an error is being displayed saying that the REFURBISHMENT ORDERS CANNOT BE PROCESSED USING BAPI.
ERROR DURING PROCESSING OF BAPI METHODS.
This is while u pass the order type as either ZM03 or SM01or SM02 or SM03.
pls help me on that.
thanks and regards,
Vijayb.

Success with Calendar Order

Similar Messages

Maybe you are looking for