Sudden blank monitor screen after recent update ... Why?

I'm the lucky owner of two ATV2s ... I use one on our regular Sony TV. I works just fine. The other one has been hooked up in an uncommon setup with a 24" cheap Samsung PC monitor. I then use AirPlay to stream audio to a good AirPlay speaker. It has been working so sweet until today when I decided to update the ATV software.
After the update the ATV refused to forward a signal to my monitor. Is there a particular reason why this happen? Should we expect a major move from Apple on TV's or are we not supposed to use Samsung gear in conjunction with Apple gear  ;-)
Kind Regards,
Christian

Need a guru to help me out please.

Similar Messages

  • Lost Dual Monitor capabilites after recent update

    After a recent update, our terminal server users no longer have the ability to have actual dual monitor capability without it just spanning over two screens. Has anyone else experienced this? Is there a fix for this?

    Hi,
    Thanks for posting in Windows Server Forum.
    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous steps should be helpful for many similar scenarios. If the issue still persists, please feel free to  reply
    this post directly so we will be notified to follow it up. 
    BTW,  we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. 
    Thanks for your Support & understanding.
    Regards.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Lots of crashing, freezing, and strange lines on screen after recent update

    I dutifully update the software when asked and suddenly I have all the following symptoms. Any advice? Thanks!
    AD
    1. A small line appears in some windows; it's multi-colored and about 3 pixels high. It goes away when I resize or play with the window.
    2. My computer crashes more often when being woken up from sleeping by pressing the mouse button; I will press my mouse to wake up the computer and it just shuts off. This has happened for the past year but happens much more frequently this week after the recent update. I took it in to the apple store months ago and they could not repeat it. It happened 3x today.
    3. A few programs have frozen / stopped responding, way too more frequently than normal.
    Thanks!
    AD

    Hi again Andy, I don't make it over here to Leo very often.
    Here's what I'd try...
    Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
    Leo clears a lot more caches than Tiger does in Safe boot.

  • White Screen after recent update

    I was updating my ipod in the locked mode when the ipod screen, still connected to the computer, went to the "apple" screen, then white. I've tried to reset my ipod by toggling the lock button (hold button) back and forth, then pushing the center button and the menu key to reset. I get three chimes, then the screen turns immediately white again and bypasses the "apple" screen.
    I have Mac OS X 10.3.9. I own an older version of the iMac.

    Welcome to Apple Discussions!
    You need to first put the iPod in Disk Mode...
    Putting iPod into Disk Mode
    Then restore...
    Restore the iPod
    btabz

  • So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

    So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone  shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
    Cannot receive any signal "searching" constantly.
    Turns off as soon as removed from usb ... wont stay on connected to laptop!
    HELP!

    The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
    Hardware can fail - it happens, which is why there is a one year warranty.

  • Firefox loads, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled no change. problem came after recent update. any help?

    firefox opens, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled- no change. problem came after recent update. any help?
    ps. IE works as usual

    Problem solved from prior post. Firefox had become blocked somehow by McAfee firewall. Set to full access. Now works perfectly.

  • Why the sound of my ipad3 gone suddenly,not first time after i update the software

    Why the sound of my ipad3 gone suddenly,not first time after i update the software

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT4515 why did I loose my end call button at bottom of screen after last update? I have to push button on top of phone to end a call

    Why did I lose my end call button at bottom of screen after last update ? I have to end  a call by pushin button at top of phone

    Hi dave2370,
    Welcome to the Support Communities!
    I'm sorry to hear you are having issues with your iPhone.  The red End Call button should still be working.
    For initial troubleshooting, I would suggest restarting and resetting your iPhone, and also updating it to the latest version of the iOS software, which is iOS 6.1.4.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Note: Reset your device only if you are unable to restart it.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    iOS: How to update your iPhone, iPad, or iPod touch
    I hope this information helps ....
    Have a great day!
    - Judy 

  • HT3775 Quicktime no longer plays wmv files after recent update

    after recent update, quicktime will not open wmv files. had no problem opening them up in the past. reinstalled flip4mac codec and nothing. don't want to use quicklime player 7 b/c need to use fast forward option that will not work with QT7. Any help is appreciated.
    thank you,
    Damian

    I ended up on the phone with an Apple iPhoto expert after scheduling an appointment online (go to Apple support). He spent an hour or so diagnosing my particular problem and was able to fix it. I can once again view all my mov files in iPhoto. Since every computer is different, you might want to try that route. He was able to view my computer screen and direct me to do different things.

  • Thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve this or is it a permanent pixel problem?

    Sudden thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve or is it permanent pixel problem?

    Try PRAM reset.
    Reset PRAM:   http://support.apple.com/kb/PH14222
    Best.

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My early 2008 Macbook Pro is suffering from black screen after Yosemite update

    My early 2008 Macbook Pro is suffering from black screen after Yosemite update. It ran beta 5 great but failed on restart after beta 6 install. There is no cursor but I can hear the HDD spooling up. I have tried booting in safe mode, PRAM reset and SMC reset but nothing works. After the first 5 days of every now and then trying to start it, it started fine. I used the machine all day with no problems, it had rolled back the install and was back on beta 5. I decided to try the update again, the same thing happened and it has stayed black for over a week now. It wont work with a monitor either. Help!

    Hello Adam,
    I would try instead of installing the beta software, to install the official build of OS X Yosemite from the Mac App Store to see if that gets you passed the no video issue when updating the beta software. 
    How to install OS X Yosemite on your Mac
    http://support.apple.com/en-us/HT6412
    Regards,
    -Norm G.  

  • Apple TV2 can't find my network connection after recent update?

    Why can't my Apple TV2 can't find my network connection after recent update?

    I had to update the software on my Airport Extreme then reset my apple tv and that resolved the issue for me.

  • Premiere Pro Windows crashing after recent updates

    Machine specs:  HP Z820 - zeon e5-2690 48gb ram quadro k5000.  Since the recent updates & complete wipe of the system & fresh install, Premiere pro CC crashes regularly without any pattern.  Using MXF files while editing if that helps-i did read a thread about that - but it was old.  This is a new problem.  The event viewer information: 
    Faulting application name: Adobe Premiere Pro.exe, version: 8.1.0.81, time stamp: 0x5426694c
    Faulting module name: mc_dec_mp2v.dll_unloaded, version: 0.0.0.0, time stamp: 0x53f72b76
    Exception code: 0xc0000005
    Fault offset: 0x000007feea381a30
    Faulting process id: 0x2168
    Faulting application start time: 0x01cfe7cdce8c2c97
    Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
    Faulting module path: mc_dec_mp2v.dll
    Report Id: ba9aeb2b-53c1-11e4-b3dd-24be05e2e6a2
    Audition has also started crashing as well.  Info:
    Faulting application name: Adobe Audition CC.exe, version: 7.1.0.119, time stamp: 0x5421531b
    Faulting module name: MSVCR110.dll, version: 11.0.51106.1, time stamp: 0x5098826e
    Exception code: 0xc0000005
    Fault offset: 0x000000000003c780
    Faulting process id: 0x249c
    Faulting application start time: 0x01cfe7ebfe3ea9e0
    Faulting application path: C:\Program Files\Adobe\Adobe Audition CC 2014\Adobe Audition CC.exe
    Faulting module path: C:\Windows\system32\MSVCR110.dll
    Report Id: 4d975a0f-53e3-11e4-b3dd-24be05e2e6a2
    Any Ideas?

    Re:
    Premiere Pro Windows crashing after recent updates
    Try finding  MSVCR110.dll  file on internet and replace it in the path C:\Windows\system32\MSVCR110.dll
    hopefully it works...

  • My imessage is not Working after recent update

    My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?

    It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.

Maybe you are looking for