I am on mobileme, my ical are syncing between my two powerbook g4 but are syncing to my iphone4 or ipad, anyone knows of an solution to this issue.

i am on mobileme, my ical are syncing between my two powerbook g4 but are syncing to my iphone4 or ipad, anyone knows of an solution to this issue.

What model powerbook? Scroll down to the Quality section of this link http://en.wikipedia.org/wiki/PowerBook_G4
 Cheers, Tom

Similar Messages

My Ipod Mini will not sync. I get the message "a duplicate file name was specified". Does anyone know how to fix this? I can't get my new songs. Thank you

My Ipod mini will not sync. I get the message "a duplicate file name was specified". Does anyone know how I can fix this so I can download my new music? Thank you

Was the iPod setup via iTunes on this computer?
Setup via wifi?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method

Sync between MacBookPro and iPhone 3G does not sync properly. Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync. Any contacts on iPhone which are not on Mac are lost during sync.

Sync between MacBookPro and iPhone 3G does not sync properly. Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync. Any contacts on iPhone which are not on Mac are lost during sync.
Solutions?

No, I never really found an easy solution. I believe it is an issue with some corruption in the iTunes database on the specific device. In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs. A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup. It did work, so I imagine it would probably work for my current issues with the iPhone and iPad. But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost. When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might. If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it. I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this? My tech skills are lacking

I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this? My tech skills are lacking

I have the same blueparrott headset headset with the directions. Actually reading them just fixed my iphone pairing issue.
Here they are in case u still need them along with what I needed to do to get mine to work with iphone 4
Pair Headset with Phone
Turn off headset off
Hold down headset's MFB (large top button) until red & blue lights flash and you hear 2 rising tones, followed by 4 more tones. Must wait for all before you release the MFB button!! (I had my hubby hold the MFB while I waited for the tones since both come from the headset
Release the MFB and follow your phone's instructions to place it in 'bluetooth' discoverable mode. With the iphone4, go to "General" and then "Bluetooth" and turn indicator to "ON".
This is where my issue occurred as the phone could not find the bluetooth, although it worked with my LG phone. So after trying it several times thinking I was nuts and that the issue was with the iphone, I looked further in the blueparrot's directions and found this step that fixed the issue.
Reset Paired Devices List
On the bluetooth, press and hold down both the volume up & volume down buttons for 5-6 seconds. A double beep will be heard and the list will be reset. Pairing info for devices previously paired will be lost.
The bluetooth directions provide this as step 4 but that did not work for my phone (see below)
4. Once the phone discovers the headset, select "pair" and enter "0000" code and that when pairing is complete the blue light on the headset will stop flashing and phone will prompt you to 'connect'.
This is what I had to do after resetting the device list on my bluetooth
4. My iphone instanting discovered the headset and displayed it under 'Devices" but showed a message that it was 'not connected'. Once I selected the device on the iphone by pressing on it then it changed to "connected".
Even when I turn the bluetooth on and off the device remains on the list and alll I do is select it to connect and disconnect after I turn on my blueparrott bluetooth
I hope this helps others!

My touch screen on my ipod Nano, Generation 6 has gone completely white. I can still play music if I "accidently" touch the right icon. Does anyone know how I can fix this. Also I have 2 other ipods that i can't sync anymore, it says they are not compatib

My touch screen on my ipod Nano, Gen 6 has gone completely white. It had started going white the day before. I tried resetting it but to no avail. Does anyone know how I could fix this. Also I have 2 other ipods that I am no longer able to sync. It comes up with a message (best I can remember) something to the effect that my itunes version is not compatible with my ipod. Please help. I'm tired of buying new ipods when the new hasn't even worn off of them!!!
Thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Can I backup two devices (with different documents) to one iCloud account? For example: iPad and iPhone, not everything is synced between the two, but I would like to backup each (seperately in the cloud), is this possible?

Hello Apple Community,
Can I backup two devices (with different documents) to one iCloud account?
For example: iPad Air and iPhone 5, not everything is synced between the two, but I would like to backup each (seperately in the cloud). Is this possible?
This way when I change from an old ipad to a new, I can restore with the ipad backup, and when I change from an old iphone to a new, I can restore from the
iphone backup.
Thank you in advance!

Terminology check here. Do you really mean a "CD"? There's a difference in Cloud behavior between content from a physical CD you ripped (which only has Cloud content if you have iTunes Match) and an "album" you bought from the iTunes Store.
Read references for Home Sharing.
iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
Home Sharing Support page - http://www.apple.com/support/homesharing/
iOS: Setting up Home Sharing on your device - http://support.apple.com/kb/ht4557 - "With Home Sharing in iOS 4.3 or later, you can stream your entire iTunes library over your home Wi-Fi network from your Mac or PC right to your iPhone, iPad, or iPod touch."
The above can get pretty complicated. You are probably best off by syncing both devices to a single library and/or updating the libraries on both computers to have the same content.

HT2729 I have downloaded a video on my iPhone but want to watch it on my iPad which both are connected to the same iTunes account but it hasn't shared to my iPad !?? When I try to download on my iPad says I've already purchased and would I like to buy aga

I have download a video on my iPhone but want to watch it on my iPad which both are connected to the same iTunes account but it hasn't shared to my iPad !?? When I try to download on my iPad says I've already purchased and would I like to buy again ?

Movies are not part of the automatic downloads feature. Apps, music and books only.
If you live in the U.S. you can download many Movies again for free using the same Apple ID that you bought the movie with. If you do not live in the U.S, that feature is not available. Not all Movies are available at this time either.
You can transfer the movie to iTunes on your computer and then sync it to the iPad if you like.

After iOS 5 upgrade my "artists" are all screwed up on my iPhone but are fine on my iTunes. ANY SOLUTIONS?? HELP!!

After iOS 5 upgrade my "artists" are all screwed up on my iPhone but are fine on my iTunes. ANY SOLUTIONS?? HELP!!

I had a similar problem to you that I have since solved.
At first only some albums/songs were missing artwork but they all showed up fine in itunes. I went into itunes and did the view where the album art is displayed next to the album in a list, middle option for viewing. I found that on several 1-2 songs did not have the artwork attached and so that was the cause of it not showing up on my iphone. However after I got all that solved I found that the artworks were all messed up. Much like you described many songs had the complete wrong artwork and some songs on the same album had different artworks or the same artwork showed up on multiple albums.
I could only come up with resyncing my iphone to solve it. I only use one playlist for my iphone so that I can sort of do manual management and only have to deal with one playlist. So I unchecked the playlist and did a sync to clear off all the audio. Then I rechecked the playlist and did a sync to reload everything and after that was done everything appeared correctly.
I didn't notice if this was affecting any of my purchased albums, I don't have that many so I didn't think about it but affected a lot of them. I hope this helps in some way and that you can get it working again.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read. Both formats are, of course, readily recognized and indexed by Spotlight. Journal articles have two essential components with regards to a database: the topical content of the article itself, and the cited references to other scientific literature. While a PDF merely lists these references, the HTML version has, in addition, links to the cited items. Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight. Embedded URL's are, of course, ignored by Spotlight. As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them. Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight. This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items" (along with "Get URLs From Web Pages") give unsatisfactory results. When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step. A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed. Is there a way for Automator to do this?

Hi,
With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
"I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson EMP-TW2000 projector. This projector is HD compatible.
To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
I prefer option 2, so my question is: which would be the preferred export preset?
Project specs:
                    - 1920x1080 sq pix (16:9)
                    - 25 fps
                    - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
Please give it a look.
Thanks,
Jef

Why are most of the apps (anything that has to search) on my iphone4 and ipad (1) running very slow (or not at all) since iOS5 update...esp google. Search seems to go quickly, but then when I try to open a link..nothing. I have turned off icloud.

why are most of the apps (anything that has to search) on my iphone4 and ipad (1) running very slow (or not at all) since iOS5 update...esp google. Search seems to go quickly, but then when I try to open a link..nothing. I have turned off icloud.

I am having the same problem. Did turning off iCloud work? Did you just turn everything off or did you actually delete the account off your iPod?

I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before.

I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before?

Start with B5/6 in the 1st linked article.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

I authorized my home sharing on my itunes for mac to share to my itunes on windows PC, but for some reason my music isn't fully sharing/syncing. Does anyone know how I can solve this problem?

I authorized my home sharing on my itunes for mac to share to my itunes on windows PC, but for some reason my music isn't fully sharing/syncing. Does anyone know how I can solve this problem?

Hi, Dave.
If you're using the BlackBerry browser, you can't configure anything to bypass the RIM servers. I believe you may do so by using the Opera browser, but I haven't tried it myself so cannot comment with authority.
I hope that clears up the issue for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

I recently purchased an iMac and transferred all of my documents etc. from my Macbook Pro, but now it seems as if some of my photos are distorted and squished. Does anyone know how I can fix this?

I recently purchased an iMac and transferred all of my documents, photos etc. from my Macbook Pro. Everything seemed fine until I opened iPhoto and now it seems as if some of my photos are distorted and squished. Does anyone know how I can fix this?

How did you move your iPhoto Library from the old Mac to your new one?
Do the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.

HT201272 My audio books are not showing up in purchase history, but everything else is okay... is anyone having the same problem?

My audio books are not showing up in purchase history, but everything else is okay... is anyone having the same problem? I have already authorised my new computer and I am currently downloading my purchased music and videos however the books (audiobooks) are not showing for download.
Hope someone can help!

"My audio books are not showing up in purchase history,"
That is correct. You cannot redownload audiobooks.
" is anyone having the same problem?"
Everyone and it is not a problem. Audiobooks simply are not available for redownload.

I am on mobileme, my ical are syncing between my two powerbook g4 but are syncing to my iphone4 or ipad, anyone knows of an solution to this issue.

Similar Messages

Maybe you are looking for