Suddenly getting kernel panics with grey screen. When I re-boot it comes up with weird messages.

This suddenly started happening continuously a few days ago. When I first boot-up its says something like the file could corrupted, truncated etc, then says "failed to initialize the store". What file? What store? What's the point of coming up with messages like that if it doesn't tell you where to find the problem?
I have disconnected everything, re-seated the RAM, re set the PRAM, started up on the back up hard drive (backed up by suoerduper daily), and the second drive does exactly the same thing when I boot up off that. After about 2 hours, especially without activity, the grey "you must re-start your computer" box comes up very time. I have absolutely no terminal experience so I am at a loss, please help.

@WZZZ Don't know a lot about this or even how to attach it as a file, so I guess I have to put it here!
Mon Oct 8 21:22:06 2012
panic(cpu 7 caller 0x2abf6a): Kernel trap at 0x00986a98, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x0000019c, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000012, ECX: 0x00000000, EDX: 0x008694b2
CR2: 0x0000019c, EBP: 0x8ba13cd8, ESI: 0x00000000, EDI: 0x30000000
EFL: 0x00010286, EIP: 0x00986a98, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 7), Frame : Return Address (4 potential args on stack)
0x8ba13ab8 : 0x21b837 (0x5dd7fc 0x8ba13aec 0x223ce1 0x0)
0x8ba13b08 : 0x2abf6a (0x59e3d0 0x986a98 0xe 0x59e59a)
0x8ba13be8 : 0x2a1a78 (0x8ba13c00 0x40c 0x8ba13cd8 0x986a98)
0x8ba13bf8 : 0x986a98 (0xe 0x48 0x8ba10010 0x2b0010)
0x8ba13cd8 : 0x97babe (0x0 0x8694b2 0x30000000 0x8ba13d00)
0x8ba13d58 : 0x97bc29 (0x800a00 0x1000000 0x8694b2 0x30000000)
0x8ba13dc8 : 0x97c0a6 (0x72d5c05c 0x8b54f0b0 0x1 0xb2948600)
0x8ba13e58 : 0x9812b8 (0x72d5c05c 0x8b54f0b0 0x0 0x82284000)
0x8ba13eb8 : 0x9871d8 (0x72d5c05c 0x7000006 0x8ba13ef8 0x2a0577)
0x8ba13ed8 : 0x553ec7 (0x1338f000 0x132cce80 0x1 0x0)
0x8ba13f28 : 0x552ea6 (0x132cce80 0x800 0x3103 0x0)
0x8ba13f88 : 0x552eea (0x1339e740 0x13e6c7a8 0x85629c27 0x2ab22a)
0x8ba13fc8 : 0x2a179c (0x1339e740 0x0 0x10 0x26001064)
      Kernel Extensions in backtrace (with dependencies):
         com.SiliconImage.driver.Si3124u(2.1.3)@0x978000->0x98bfff
            dependency: com.apple.iokit.IOSCSIParallelFamily(2.1.1)@0x958000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x961000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacPro2,1 (Mac-F4208DA9)
System uptime in nanoseconds: 4453418634639
unloaded kexts:
com.apple.driver.AirPortBrcm43xx    423.91.27 (addr 0xe32000, size 0x1900544) - last unloaded 162677537937
loaded kexts:
com.intego.iokit.VirusBarrierX6Service    10.6.15 - last loaded 184247220967
com.intego.iokit.VBX6NKE    1
com.intego.iokit.BehavioralKext    1
com.bresink.driver.BRESINKx86Monitoring    7.0
com.intego.kext.VirusBarrier.AppBarrierKPI    10.6.15
com.intego.kext.VirusBarrierKPI    10.6.15
com.eltima.ElmediaPlayer.kext    1.0
com.sierrawireless.driver.SierraIPDirect    1.1.5
com.sierrawireless.driver.SierraHSRSupport    3.0.0
com.blackmagic-design.iokit.DeckLinkDriver    9.0
com.blackmagic-design.iokit.DeckLinkHD_Driver    1.0.0
com.blackmagic-design.iokit.DeckLinkFrameBuffer    9.0
com.logmein.driver.LogMeInSoundDriver    1.0.0
com.hzsystems.driver.CDSDAudioCaptureSupport    1.5
com.LaCie.ScsiType00    1.2.8
com.sierrawireless.driver.SierraDIPSupport    1.0.0
com.oxsemi.driver.OxsemiDeviceType00    1.28.13
com.SiliconImage.driver.Si3124u    2.1.3
com.apple.driver.AppleHWSensor    1.9.3d0
com.apple.driver.AppleUpstreamUserClient    3.5.7
com.apple.driver.AppleHDA    2.0.5f14
com.apple.driver.AppleMCCSControl    1.0.20
com.apple.kext.ATIFramebuffer    6.3.6
com.apple.driver.IOBluetoothBNEPDriver    2.4.5f3
com.apple.driver.AudioAUUC    1.57
com.apple.driver.AppleUSBDisplays    289
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.1.6
com.apple.driver.AppleMCEDriver    1.1.9
com.apple.driver.AppleIntelMeromProfile    19
com.apple.filesystems.autofs    2.1.0
com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.0a1
com.apple.ATIRadeonX3000    6.3.6
com.apple.driver.AppleLPC    1.5.1
com.apple.iokit.SCSITaskUserClient    2.6.8
com.apple.BootCache    31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.driver.AppleIntel8254XEthernet    2.1.3b1
com.apple.iokit.IOAHCIBlockStorage    1.6.4
com.apple.driver.AppleFWOHCI    4.7.3
com.apple.driver.AppleUSBHub    4.2.4
com.apple.driver.AirPortBrcm43224    428.42.4
com.apple.driver.AppleAHCIPort    2.1.7
com.apple.driver.AppleIntelPIIXATA    2.5.1
com.apple.driver.AppleEFINVRAM    1.4.0
com.apple.driver.AppleUSBEHCI    4.2.4
com.apple.driver.AppleUSBUHCI    4.2.0
com.apple.driver.AppleACPIButtons    1.3.6
com.apple.driver.AppleRTC    1.3.1
com.apple.driver.AppleHPET    1.5
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.3.6
com.apple.driver.AppleAPIC    1.4
com.apple.driver.AppleIntelCPUPowerManagementClient    142.6.0
com.apple.security.sandbox    1
com.apple.security.quarantine    0
com.apple.nke.applicationfirewall    2.1.14
com.apple.driver.AppleIntelCPUPowerManagement    142.6.0
com.apple.driver.DspFuncLib    2.0.5f14
com.apple.driver.AppleProfileReadCounterAction    17
com.apple.driver.AppleProfileTimestampAction    10
com.apple.driver.AppleProfileThreadInfoAction    14
com.apple.driver.AppleProfileRegisterStateAction    10
com.apple.driver.AppleProfileKEventAction    10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.iokit.IOFireWireIP    2.0.3
com.apple.iokit.IOSurface    74.2
com.apple.iokit.IOBluetoothSerialManager    2.4.5f3
com.apple.iokit.IOSerialFamily    10.0.3
com.apple.iokit.IOAudioFamily    1.8.3fc2
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleHDAController    2.0.5f14
com.apple.iokit.IOHDAFamily    2.0.5f14
com.apple.iokit.AppleProfileFamily    41
com.apple.driver.AppleSMC    3.1.0d5
com.apple.driver.IOPlatformPluginFamily    4.7.0a1
com.apple.iokit.IONDRVSupport    2.2.1
com.apple.kext.ATI5000Controller    6.3.6
com.apple.kext.ATISupport    6.3.6
com.apple.iokit.IOGraphicsFamily    2.2.1
com.apple.driver.CSRUSBBluetoothHCIController    2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController    2.4.5f3
com.apple.iokit.IOBluetoothFamily    2.4.5f3
com.apple.driver.AppleUSBHIDMouse    162
com.apple.driver.AppleHIDMouse    162
com.apple.driver.AppleUSBHIDKeyboard    141.5
com.apple.driver.AppleHIDKeyboard    141.5
com.apple.iokit.IOUSBHIDDriver    4.2.0
com.apple.driver.AppleUSBMergeNub    4.2.4
com.apple.driver.AppleUSBComposite    3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    2.6.8
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.6
com.apple.iokit.IOCDStorageFamily    1.6.1
com.apple.iokit.IOSCSIBlockCommandsDevice    2.6.8
com.apple.driver.XsanFilter    402.1
com.apple.iokit.IOATAPIProtocolTransport    2.5.1
com.apple.iokit.IOSCSIParallelFamily    2.1.1
com.apple.iokit.IOSCSIArchitectureModelFamily    2.6.8
com.apple.iokit.IOFireWireFamily    4.2.6
com.apple.iokit.IOUSBUserClient    4.2.4
com.apple.iokit.IO80211Family    320.1
com.apple.iokit.IONetworkingFamily    1.10
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOATAFamily    2.5.1
com.apple.iokit.IOUSBFamily    4.2.4
com.apple.driver.AppleEFIRuntime    1.4.0
com.apple.iokit.IOHIDFamily    1.6.6
com.apple.iokit.IOSMBusFamily    1.1
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    6
com.apple.driver.DiskImages    289
com.apple.iokit.IOStorageFamily    1.6.3
com.apple.driver.AppleACPIPlatform    1.3.6
com.apple.iokit.IOPCIFamily    2.6.5
com.apple.iokit.IOACPIFamily    1.3.0

Similar Messages

Kernel panics and grey screen on startup

Hello savvy bunch,
I recently acquired a wonderful little Core Solo mini. My plan was to
run it starting up from a 400GB hard drive in an external FW enclosure
that has another 200GB drive I was going to use for backups. Long
story short, the 400GB drive starting giving me weird Finder problems
and such. Booting from the internal HDD in the mini fixed everything.
Then it started having sudden kernel panics at random moments (I could
be writing an email, browsing on Safari, whatever), after which upon
restart I get an empty grey screen that lasted forever. I tried
several fixes, and the only one that worked was unplugging the FW
enclosure. I erased and fixed both external HDDs, and things calmed
down for a while, but I just had another kernel panic-grey screen
episode, which I solved turning off the FW enclosure.
I remember now that I had similar problems before with the same
enclosure/HDDs and my Quicksilver. Could the problem be the enclosure,
or the hard drives themselves?
TIA,

Oh, don't worry, I know and use all the right protocols for mounting and unmounting FW drives. They only get turned off AFTER they are dismounted. Of course now I realize that you wouldn't think so the way I described what I was doing. (That was some lazy writing, I guess.) I also have several external drives in use with several other computers. It's this particular enclosure that seems to be trouble.
As far as brands go, this is some kind of generic two-drive enclosure I got from OWC on a big sale a while back. I cannot find a brand name for the life of me (and I have looked all over it). I have not had a lot of luck with two-drive enclosures. This is my second (the first one was I think a Newertech or some other OWC brand, which died very quickly on me. The HDDs survived and are still in use.)
As for Lacies, Smokerz, you are completely right. My first FW enclosure ever was a Lacie, and it's still going strong. I have my eye on a Lacie 1TB enclosure that's in Newegg for $99...

Kernel Panics with 10.4.7.

So, did anyone else SUDDENLY get Kernel Panics with the 10.4.7?

Hi, Anapharya.
No kernel panics on my Macs after 10.4.7 Update.
See my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics.
My FAQ is a roadmap: start at the beginning and work through to the end, including the "If all else fails..." section if a cause or resolution is not found in an earlier troubleshooting step therein.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Kernel Panic with AppleIntelCPUPowerManagement on Macbook Pro Retina 15

Hello,
I'm getting Kernel Panic with grey "Death Screen". This happends 5 times. On 5-th of January (3 times) and on 8-th (2 times).
All the cases according to Consol reports have similar symphtoms:
panic(cpu 2 caller 0xffffff802aeb7e75): Kernel trap at 0xffffff7face2557e, type 13=general protection, registers:
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelCPUPowerManagement(196.0)[F79878E3-8CF9-3ACF-B578-2CE 754CA61F8]@0xffffff7face0e000->0xffffff7face36fff
This line (besides many others) is different in reports
BSD process name corresponding to current thread: WindowServer (2 times)
And other one quicklookd, WebProcess and Web Service.
I sent all reports to Apple Support as MAC OS asked me about. BTW I can publish them again here.
Firstly, may be it's possible to figure out the reason of panics: Is this the SW or HW problem?
Guys at service told me to bring Macbook AS IS. But if this is the SW problem I can clean / reinstall OS etc. myself.
And (after cleaning and/or reinstalling) if the problem is in HW I'll be getting panics again. So I can bring to service Macbook with new history of panics.
So what is the probability of HW problem in such a case. When all reports point to the same .kext file.
Thank You in advance.
Cheers,
Victor
P.S.: Computer is new, I didn't change configuration, OS etc.
Installed programs under question: m3tag (Tag Editor - recompiled by somebody from WIndows program with some similar to CrossOver env.)
Adobe FlashPlayer Plugin

Thanks for reply.
Exactly - MP3Tag Wineskin port. I also think that here is the reason. This port is up-to-date (10.8.2 compatible) but very inacurate - I found many garbage in MP3Tag package. And the original Windows program is very old - 1984(?).
I removed this program from computer and I have to get a try for some period of time.

My G4 hangs on a grey screen when I try to boot in OS 9 help?!

I'm desperate! My mac G4 that I've been running for years with both OS X and OX 9 has been unable to boot in OS 9 and I've tried almost everything form option hold on restarts to shift (exrtensions off) zapping the pram etc. I know others have had this problem. I've researched a lot already. I used the same G4 and the same monitor and hardware and everything for years and this problem suddenly sprang up out of nowhere. I desperately need to get this machine to boot in OS 9 because I'm using Protools with many plugins and cards that are not supported on OS X. When I boot in OS X it acts fine no problem like it always did. When ever I try to boot in OS 9 it hangs on a grey screen and then freezes up before and happy face and or extensions have loaded etc.
One thing, and I don't know how important this may be, is that the first time I encountered this problem was after I had attached a USB hub to my computer which had been sitting unused for some weeks and the Hub somehow made the computer start up when I plugged in the USB cable to the USB Hub?! After that OS 9 has refused to boot period no matter what I do. I can run some apps in the classic environment but cannot boot to OS 9 at all ever.
I read in one forum where a guy did an open firmware reset and got some error messages that had to do with USB. He was having the same problem the grey screen when trying to boot on OS 9.
Does any one have an answer Please I'm almost ready to give up!

Hey me back again month later. Well I have tried everything. I even pulled the hard drive out of my G4 and replaced it with a tested and working hard drive which had only OS9 installed on it. In other words that computer had two choices boot into OS 9 or hang on a grey screen. There was no other system present to boot into, so after chiming and starting the boot process it just hangs on the grey screen again. So I guess what Steve Jobs meant when he said OS 9 is dead is that they killed OS 9 because my machine will not look at any OS 9 system folder regardless of whether OS X exists on the machine or not. I tried to reboot holding down option command P R and after the second chime grey screen again. I've read that OS 9 requires some small folder or bytes to be recognized in order to boot which it is obvious newer versions of OS X purposely and maliciously delete in order to make it inoperable. My protools gear works fine I've rested it on other machines. The only way that I can use it is to be able to boot into OS9. Which has been corrupted by OS X. They say you can format a disc with OS 9 drivers but I see no such option using OS 10.4 tiger so I'm not sure what they are talking about.
So here is my question. Why would a G4 450mghz machine with a working OS 9 hard disc installed with no other system folders available not boot after it chimes and begins the start up process. If it is because running OS 10.4 disables the OS 9 drivers and corrupts the machine so that it can never look at a OS 9 again let's just admit that and say OK Steve was right OS 9 is dead but it did not die of natural causes.

Kernel Panics with Toast 8

I kept getting kernel panics with iDVD and Toast 7. I upgraded to the iLife '08 and Toast 8, did all the software updates, and firmware updates to the DVD burner, but I'm still getting kernel panics. The computer's a PowerMac G5 dual 2.0 GHz, 3 GB RAM, LaCie Lightscribe DVD dual-layer burner.
Any ideas?
TIA

all software is up to date.
iDVD 5 is not compatible with Mac OS X 10.5 (Leopard). While this article indicates that the application may simply quit, other issues could also appear.
http://docs.info.apple.com/article.html?artnum=306062
Again, no mention of kernel panics, but Roxio has yet to release an update to Toast 7 to make it compatible with Mac OS X 10.5 (Leopard). An update is planned for the future.
http://kb.roxio.com/content/kb/Jam/000056T?set-locale=en
The text of the kernel panic itself may help some more knowledgeable people here to help determine what piece may be causing the trouble. Or if both crashes are related or separate. You can find the text of the panic in the Console utility.
-Doug

When powering up my macbook, all i get is a white/grey screen with an apple in the centre.

When powering up my mac, all im getting is a white/grey screen and an apple in the middle of the screen. There is a timer going around and around underneath this. Any Suggestions?

See here: iPod Displays a Red "X" Icon
Note that if it is often the sign of a hardware issue, usually with the iPod's Hard Drive.
B-rock

My Mac won´t load. When I turn it on, I type the password, then it starts to load, but nothing happens. It gets stuck on the grey screen with the apple logo. I can´t go to an Apple store since I´m working in Bolivia. Thanks

When I turn it on, I type the password, then it starts to load, but nothing happens. It gets stuck on the grey screen with the apple logo. I can´t go to an Apple store since I´m working in Bolivia. Thanks

RhysWills1,
which model MacBook Pro do you have, and which version of OS X is installed on it?

Help with kernel panic and freezing screen?

A few months ago I had kernel panic screens about twice, but the problem didn't recur again for a while. Over the last two weeks, however, I've had two more kernel panics, and the screen freezes (mouse, all actions, etc) and the machine has to be manually restarted about every five minutes.
I've tested the two ram sticks, erased and re-installed the OS but had no luck resolving the issue.
I followed the link on resolving kernel panic problems from earlier threads to troubleshoot as much as possible. I don't have the original software so can't do a few steps, but on the whole have had no luck.
I don't have any external or USB devices hooked up when it fails. I do occasionally use USB pen drives, but that doesn't seem to be related. I bought a new, non-apple power source a while back, too, but also don't think that's related.
Before I bought the laptop from a friend, he installed a different hard drive, but I believe it came from another G4 Ti machine. He left two screws out of the bottom of the case.
I'm thinking mainboard or possible hard drive? Any ideas?
Also, since reinstalling the harddrive, I've had no error report message come up when the machine restarts, and there isn't an error log file, at least not for kernel panics (that I can find.) Before I reinstalled the OS, I read the error reports and they said something about kernels....but I don't remember what, specifically.
If there are other useful logs I could post, let me know and I'll find them. Are the console logs or directory service logs of any use?
Thanks in advance for any help or any advice...!
PowerBook G4 Ti Mac OS X (10.4)
PowerBook G4 Ti Mac OS X (10.4)

Hi tjk
- Thanks for the help.
I've tested the two ram sticks
How?
I took out each stick one at a time and ran the machine with a single instead of both.
I have dual 256 sticks. The original, and a Samsung which came with it when I bought it used.
In both cases, the same problem occurred.
How much free space do you have available on your HD?
If not 5GB or more, this could be causing issues.
I had about 20GB free. Now it's running with 70Gb free and still the same problems. It's an 80 GB hard drive that was installed into the PB when I bought it a few months ago. I had the machine for about three weeks first, and didn't have any of these problems with the other hard drive in it.
I don't have the install disk, so can't run the disk utility repair, correct. I've also not been able to get the PB to boot from the disk instead of the hard drive. It brings up only the hard drive as a selection to boot from, and spins up the OSX DVD, then ejects it each time.
...not sure why...I've been holding down option when restarting to boot from other drives -- if there's another way to boot from the disk, maybe that would work...
Have a look at the Orange Ribbon Cable Issue/Fix and see if
it might apply to your PB. Which Ti do you have btw?
This is a really interesting link and for a bit I thought it sounded exactly like the problem...but I have the original TiBook, 500 Mhz so the trackpad cable doesn't run through the same spot. Maybe there's something else shorting out or pinching underneath...I'll take a look, but I'm not necessarily hardware savvy enough to know what to look for.
Thanks again for any suggestions.
PowerBook G4 Ti Mac OS X (10.4)

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report:          8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
      Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker.

OS X Lion gets kernel panic when connecting via CIFS

A customer of ours has problems with OS X Lion clients that get kernel panic when connecting via CIFS (Novell OES server).
Any new on this issue?
Tycho Sjgren
Apoio AB

Originally Posted by tychosjogren
Sorry for the late response - had to check a few things with the customer.
They use the latest OES version with all the latest sp and patches applied. They have even tested with the an OES 11 beta with the same result. The OS run as a VM on VMware in 64 bit mode attached to a SAN. Has also been tested as a plain install without VMware. The Lion version is 10.7.2.
This is how the problem occurs:
1. Mount the CIFS share - no problems
2. Use the share - no problems
3. If the network connection drops you get a message that the CIFS volume has disappeared and you are asked to unmount it. When you do that you get a kernel panic. You can force the problem to happen by turning of WiFi.
So it is OES2 but which version (SP1, SP2, or SP3)? Interesting as I'd only heard of this with NetWare 6.5.
Do you (and anyone else experiencing this issue in this thread) know if this has recently started happening, perhaps after the latest November 2011 Scheduled Maintenance patches were installed?
I'll hopefully be able to do some testing tomorrow but in the meantime I've asked Novell ...
HTH.

Flashing question mark on mac book pro,with grey screen when turned on?

flashing question mark on mac book pro,with grey screen when turned on?

Press the power button down to force a emergency hardware shutdown and hold the option/alt key down and reboot
If you see your OS X boot partition, then click it and the arrow, head to System Preferences > Startup Disk and reset it. Done.
Folder with question mark issue
If that doesn't it, then do a #2 PRAM reset and try the above again.
..Step by Step to fix your Mac
If no OS X boot volume appears in Startup Manager, then OS X is corrupted.
Try more of the Steps above (like 1-8) then if that doesn't work.
Create a data recovery/undelete external boot drive
Once you got your data off, erase and reinstall OS X onto the MacintoshHD partition and then restore from TimeMachine or bootable clone if you have it. or build new and return users files from the data recovery drive.
Most commonly used backup methods
If the drive doesn't appear in Disk Utility it might be dead or there are further complications let us know for further assistance.
Install/upgrade RAM or storage drive in Mac's
My computer is not working, is my personal data lost?
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

Kernel panics with external mouse in clamshell mode

Have had more than 6 kernel panics; usually after waking; always in clamshell mode when using a Logitech wireless mouse (with or w/o software loaded) or Kensington USB trackball (with driver loaded but not worth using w/o driver). Does not happen with Apple USB mouse. Does not happen in laptop mode -- haven't tried laptop mode w/external mouse. Always on work Ethernet when in clamshell mode.
Has occurred w/OS 10.4.9 and 10.4.10. Have run extended Apple hardware test w/no results.
Have removed Logitech “LCC” file from user/library/application enhancers.
Have experienced panics w/a variety of apps open/active, including just Safari.
Any help greatly appreciated.
Here are panic logs:
==
panic(cpu 1 caller 0x003BDEB0): OSObject::refcount: Attempting to retain a freed object
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x362f3bb8 : 0x128d08 (0x3cb134 0x362f3bdc 0x131de5 0x0)
0x362f3bf8 : 0x3bdeb0 (0x3f0f9c 0x3f0f78 0x50efa04 0x4d609c0)
0x362f3c18 : 0x3c0d3b (0x4b62740 0x4ae958 0x28 0x3c09c4)
0x362f3c48 : 0x3c0e94 (0x4fd91c0 0x4d609c0 0x0 0x3c10ef)
0x362f3c68 : 0x3c188a (0x4d609c0 0x0 0x0 0x0)
0x362f3ca8 : 0x3c18f7 (0x4d609c0 0x4fd92c0 0x4fe32c0 0x1628d8)
0x362f3ce8 : 0x38663c (0x4d41800 0x0 0x362f3d28 0x3c1002)
0x362f3d08 : 0x389e5b (0x4d28480 0x4fe3040 0x0 0x4d28480)
0x362f3d28 : 0x3b1448 (0x4d28480 0x4fe3040 0x362f3d58 0x3bdfd9)
0x362f3d78 : 0x188511 (0x4d28480 0x52d89b4 0x52d89c8 0x11cc32)
0x362f3db8 : 0x12b4c3 (0x54b61b4 0x52d8998 0x0 0x0)
0x362f3df8 : 0x124b17 (0x54b6100 0x0 0x18 0x362f3edc)
0x362f3f08 : 0x195a42 (0x362f3f44 0x0 0x0 0x0)
0x362f3fc8 : 0x19b21e (0x55283e0 0x0 0x19e0b5 0x55283e0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb0220508
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
==
panic(cpu 0 caller 0x001A429B): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x00e7d000, CR4: 0x000006e0
EAX: 0x0501cb40, EBX: 0x00000018, ECX: 0x004ae958, EDX: 0x050137a0
CR2: 0x00000000, EBP: 0x36473c48, ESI: 0x00000003, EDI: 0x06b5b7c0
EFL: 0x00010202, EIP: 0x00000000, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x36473a18 : 0x128d08 (0x3cb134 0x36473a3c 0x131de5 0x0)
0x36473a58 : 0x1a429b (0x3d0e4c 0x0 0xe 0x3d0670)
0x36473b68 : 0x19ada4 (0x36473b80 0x206 0x36473bd8 0x1416ad)
0x36473c48 : 0x3c0e94 (0x6b5b7c0 0x4d8ab00 0x0 0x3c10ef)
0x36473c68 : 0x3c188a (0x4d8ab00 0x0 0x0 0x0)
0x36473ca8 : 0x3c18f7 (0x4d8ab00 0x6b5b940 0x6a21080 0x1628d8)
0x36473ce8 : 0x38663c (0x4d659c0 0x0 0x36473d28 0x3c1002)
0x36473d08 : 0x389e5b (0x4d44200 0x6b40100 0x0 0x4d44200)
0x36473d28 : 0x3b1448 (0x4d44200 0x6b40100 0x36473d58 0x3bdfd9)
0x36473d78 : 0x188511 (0x4d44200 0x53e7cb4 0x53e7cc8 0x11cc32)
0x36473db8 : 0x12b4c3 (0x5d579b4 0x53e7c98 0x0 0x0)
0x36473df8 : 0x124b17 (0x5d57900 0x0 0x18 0x36473edc)
0x36473f08 : 0x195a42 (0x36473f44 0x0 0x0 0x0)
0x36473fc8 : 0x19b21e (0x553c820 0x0 0x19e0b5 0x553c820) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb02203c8
==
panic(cpu 1 caller 0x001A429B): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x00eac000, CR4: 0x000006e0
EAX: 0x05f522c0, EBX: 0x00000010, ECX: 0x004ae958, EDX: 0x05f522a0
CR2: 0x00000000, EBP: 0x364cbc48, ESI: 0x00000002, EDI: 0x05f7a040
EFL: 0x00010202, EIP: 0x00000000, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x364cba18 : 0x128d08 (0x3cb134 0x364cba3c 0x131de5 0x0)
0x364cba58 : 0x1a429b (0x3d0e4c 0x1 0xe 0x3d0670)
0x364cbb68 : 0x19ada4 (0x364cbb80 0x202 0x364cbbd8 0x1416ad)
0x364cbc48 : 0x3c0e94 (0x5f7a040 0x4e040c0 0x0 0x3c10ef)
0x364cbc68 : 0x3c188a (0x4e040c0 0x0 0x0 0x0)
0x364cbca8 : 0x3c18f7 (0x4e040c0 0x5f9ffc0 0x5f9fcc0 0x1628d8)
0x364cbce8 : 0x38663c (0x4dfef40 0x0 0x364cbd28 0x3c1002)
0x364cbd08 : 0x389e5b (0x4dd4400 0x5f9fb00 0x0 0x4dd4400)
0x364cbd28 : 0x3b1448 (0x4dd4400 0x5f9fb00 0x364cbd58 0x3bdfd9)
0x364cbd78 : 0x188511 (0x4dd4400 0x56f88b4 0x56f88c8 0x11cc32)
0x364cbdb8 : 0x12b4c3 (0x51c6cb4 0x56f8898 0x0 0x0)
0x364cbdf8 : 0x124b17 (0x51c6c00 0x0 0x18 0x364cbedc)
0x364cbf08 : 0x195a42 (0x364cbf44 0x0 0x0 0x0)
0x364cbfc8 : 0x19b21e (0x55adea0 0x0 0x19e0b5 0x4c7bd08) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb011e3e8
==
panic(cpu 0 caller 0x00194914): pmap no pv_e's
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x3647bd28 : 0x128d08 (0x3cb134 0x3647bd4c 0x131de5 0x0)
0x3647bd68 : 0x194914 (0x3ce7d4 0x90cd3000 0x0 0x0)
0x3647bdf8 : 0x160ab6 (0x536c488 0x90cd3000 0x0 0xe2f9)
0x3647bf48 : 0x1a450e (0x13e0ce4 0x90cd3000 0x0 0x5)
0x3647bfc8 : 0x19acd4 (0x557cae0 0x0 0x19e0b5 0x4c8e4c0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff8b8
==
panic(cpu 0 caller 0x001A4A55): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x0000002b, CR3: 0x00eae000, CR4: 0x000006e0
EAX: 0x05230e40, EBX: 0x00000020, ECX: 0x004b0958, EDX: 0xffffffff
CR2: 0x0000002b, EBP: 0x364abc48, ESI: 0x00000004, EDI: 0x0526dc40
EFL: 0x00010202, EIP: 0x003c1ca8, CS: 0x00000008, DS: 0x019e0010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x364aba28 : 0x128d08 (0x3cc0a4 0x364aba4c 0x131de5 0x0)
0x364aba68 : 0x1a4a55 (0x3d24b8 0x0 0xe 0x3d1cdc)
0x364abb78 : 0x19aeb4 (0x364abb90 0x1 0x364abb98 0x28)
0x364abc48 : 0x3c1e04 (0x526dc40 0x4f98200 0x0 0x3c205f)
0x364abc68 : 0x3c27fa (0x4f98200 0x0 0x0 0x0)
0x364abca8 : 0x3c2867 (0x4f98200 0x52e0080 0x5267c40 0x1628d8)
0x364abce8 : 0x38759c (0x4f92f40 0x0 0x364abd28 0x3c1f72)
0x364abd08 : 0x38adbb (0x4f91f80 0x5237440 0x0 0x4f91f80)
0x364abd28 : 0x3b23a8 (0x4f91f80 0x5237440 0x364abd58 0x3bef49)
0x364abd78 : 0x188511 (0x4f91f80 0x5a074b4 0x5a074c8 0x11cc32)
0x364abdb8 : 0x12b4c3 (0x5a070b4 0x5a07498 0x0 0x0)
0x364abdf8 : 0x124b17 (0x5a07000 0x0 0x18 0x364abedc)
0x364abf08 : 0x195a42 (0x364abf44 0x0 0x0 0x0)
0x364abfc8 : 0x19b32e (0x570c6c0 0x0 0x19e0b5 0x5332828) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb011e3e8
==
NOTE: This last one occurred with Kensington USB Trackball mouse and MouseWorks installed, after working successfully most of the day. Previous kernel panics were w/Logitech wireless mouse.
==
panic(cpu 1 caller 0x001A4A55): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x00000028, CR3: 0x0195d000, CR4: 0x000006e0
EAX: 0x0000001c, EBX: 0x05811020, ECX: 0x004b0958, EDX: 0x00417e60
CR2: 0x00000028, EBP: 0x370dbb28, ESI: 0x00000008, EDI: 0x004b0958
EFL: 0x00010206, EIP: 0x00390660, CS: 0x00000008, DS: 0x02490010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x370db8f8 : 0x128d08 (0x3cc0a4 0x370db91c 0x131de5 0x0)
0x370db938 : 0x1a4a55 (0x3d24b8 0x1 0xe 0x3d1cdc)
0x370dba48 : 0x19aeb4 (0x370dba60 0x780 0x0 0x200ab)
0x370dbb28 : 0x3c1cab (0x5811020 0x4b0958 0x120 0x3c1934)
0x370dbb58 : 0x3c1e04 (0x6093600 0x5d27c00 0x24 0x19a216)
0x370dbb78 : 0x387604 (0x5d27c00 0x24 0x370dbbb8 0x6c9dfc0)
0x370dbb98 : 0x38bfd4 (0x5d20c00 0x57be1e0 0x370dbbd8 0x3c3913)
0x370dbbf8 : 0x38aed3 (0x5d20c00 0x6d11f40 0x0 0x6048a00)
0x370dbc38 : 0x38b280 (0x6d11f40 0x4 0x0 0x6d0d040)
0x370dbc78 : 0x38b2dd (0x57c0de0 0x6d11f40 0x3b0bba 0x6d0d040)
0x370dbca8 : 0x38b331 (0x57c0de0 0x6d11f40 0x3b0bba 0x6d0d040)
0x370dbce8 : 0x3b1bce (0x57c0de0 0x6d11f40 0x3b0bba 0x6d0d040)
0x370dbd38 : 0x18c2fa (0x576d728 0x63c3094 0x63c30b0 0x6b967f8)
0x370dbdb8 : 0x12b4c3 (0x63c305c 0x657c7a4 0x370dbdf8 0x11e042)
0x370dbdf8 : 0x124b17 (0x63c3000 0x5768600 0x6816f48 0x0)
0x370dbf08 : 0x195a42 (0x370dbf44 0x0 0x0 0x0) Backtrace continues...

Greetings.
I'm having the same problem as Beanfield. I'm using a MX620 Logitech Wireless Laser Mouse, and it produces several problems under Mac OS X 10.4.10. The micro receiver is plugged to the rear of my iMac Intel Dual Core and altough I've switched it to the USB ports of my Apple Keyboard it still happens.The Kernel Panics (with the Grey Screen of Death) happen mostly when the mouse awakes the computer. Very often, when right clicking or single clicking items, the menus appear and disappear. Dragging items becomes impossible and even after restarting the iMac the problem persists.
It also interfers with the keyboard: sometimes the cursor blinks when moving and when I press any key on the keyboard, it resumes its normal activity. Recently I've added 1 G of RAM, but I've excluded it from the problem since it worked normaly with my now defunt Mighty Mouse. Also, I bought a 500 G Lacie external drive that works very well.
I'm getting very frustrated since this problems began only a few weeks after my purchases, which took in account full compatibility with my system. All drivers are correctly installed so...what's happening?
Best Regards
Pedro

Quicksilver G4 wont finish startup - gets kernel panic - how to fix?

Recently acquired a G4 quicksilver - dual core 867Mhz (mirror door) - we managed to get it working for half an hour after we gave it some RAM and a hard drive (it came with none) before it froze. When we tried a restart we got the grey screen and a message which contained lots of Chinese symbols instructing you to power down the computer. Now we only get kernel panics. I've attached a pic of the panic in case any of you can decipher it. What's the next step?

Boot off your Apple Hardware Test Disc , then run the extended Apple Hardware Test. Your model would have a separate AHT CD.
Here's the list and downloads for AHT for some G4 models if you don't find yours, some G4s only have it on the Original Install Disc...
http://www.info.apple.com/support/aht.html
Does it boot into any of these modes?
Target mode...
http://support.apple.com/kb/HT1661
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
We might get clues with verbose mode...
http://support.apple.com/kb/HT1492
Does it boot into Open Firmware with CMD+Option+o+f ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238
How to reset the SMU/PMU on a Power Mac Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Kernel panics with external Apple modem

This question has been raised before, but I'm revisiting it in hopes someone may have found a solution.
I'm getting frequent freezes and failures to awake from sleep, and a number of kernel panics that always implicate the faxmodem:
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleSM56KUSBAudio(1.9.14)@0x6d364000->0x6d37efff
dependency: com.apple.iokit.SM56KUSBAudioFamily(1.5.10)@0x6d34d000
dependency: com.apple.iokit.IOUSBFamily(3.1.5)@0x602000
com.apple.driver.AppleUSBUHCI(3.1.5)@0x8e1000->0x8eefff
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x631000
dependency: com.apple.iokit.IOUSBFamily(3.1.5)@0x602000
com.apple.iokit.IOUSBFamily(3.1.5)@0x602000->0x629fff
When the USB modem is not connected I do not get these KPs.
Apparently there is a firmware conflict between this old Apple modem (I bought it for another machine in 2006) and Intel-based duo-core machines. The Apple Store people tell me the newest Apple USB modems are the same, that is, they have not been updated.
Any ideas? Do I have to buy another fax modem? I just use it for faxes.
Thanks.

Greetings.
I'm having the same problem as Beanfield. I'm using a MX620 Logitech Wireless Laser Mouse, and it produces several problems under Mac OS X 10.4.10. The micro receiver is plugged to the rear of my iMac Intel Dual Core and altough I've switched it to the USB ports of my Apple Keyboard it still happens.The Kernel Panics (with the Grey Screen of Death) happen mostly when the mouse awakes the computer. Very often, when right clicking or single clicking items, the menus appear and disappear. Dragging items becomes impossible and even after restarting the iMac the problem persists.
It also interfers with the keyboard: sometimes the cursor blinks when moving and when I press any key on the keyboard, it resumes its normal activity. Recently I've added 1 G of RAM, but I've excluded it from the problem since it worked normaly with my now defunt Mighty Mouse. Also, I bought a 500 G Lacie external drive that works very well.
I'm getting very frustrated since this problems began only a few weeks after my purchases, which took in account full compatibility with my system. All drivers are correctly installed so...what's happening?
Best Regards
Pedro

Suddenly getting kernel panics with grey screen. When I re-boot it comes up with weird messages.

Similar Messages

Maybe you are looking for