Suddenly, my IPad and iPhone stopped printing to my canon airrprint printer. PC and Mac still print wirelessly. IPad and iPhone show message "no AirPrint printers found". Previously, all was working fine. What happened?
Suddenly,my IPad and iPhone stopped printing to my canon AirPrint printer. Both pc and Mac print wirelessly ok so signal is there. IPad and iPhone both get "no AirPrint printer found" message. Any help would be greatly appreciated.
Hey nanalb,
Thanks for the question. There's a section at the bottom of this article that goes over what to do if you see the message "No AirPrint Printers Found" on your iOS device:
AirPrint Basics
http://support.apple.com/kb/ht4356
Have a good one,
David
Similar Messages
-
I have hp 1018 laser printer and windows 7 ,all was working fine, suddenly it stop printing all PDFs
i have hp 1018 laser printer and windows 7 ,all was working fine, suddenly it stop printing all PDFs.i have adobe acrobat X pro installed and adobe X1 reader installed, i searched a lot, nothing i found when i send command to print a PDF it just do nothing , but rest of images or word doc and webpages are beings printed, can any one help me whats going on ?
well i have found that i needed to not just uninstall itunes, but also apple mobile device support, bonjour apple software update and apple application support - uninstall all these and then install itunes - that seesm to have fixed it, though now i am sync fail - that's a different matter perhaps
-
iTunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2 -
Hi, hope someone can help, I can't connect to the Internet, I'm getting the message "Wi-Fi: No hardware installed" it was working one minute and then just stopped, my by home hub is working fine as my iPhone is connected, is there anything I can do?
Before resetting try restarting. Or you can go to Settings from the home screen > Wi-Fi > your network and scroll down to 'Renew Lease' and press that. When you do you should see a button labeled 'Renew Lease?' and another labeled 'Cancel'. Select 'Renew Lease'.
You can either back out of that screen back to the home screen or just use the return button to go back to the home screen. Then select Safari and see if you can hook in.
I have to go through that process every five or ten minutes or so when in the second story of our house - weak router signal up there. -
I Have a new wifi router and have set up my iPad / iPhone and wireless printer correctly to the new router but I can't print from the iPad and iPhone. It keeps saying ' no AirPrint printer found'. Help please!
Start with the most basic thing that you can try. Unplug the router from power for about 30 seconds, and restart the printer and the iPad and plug the router back into power.
-
I have windows 7 and all has been fine until 2 days ago when suddenly i turned on my laptop and i got some error message about some apple support program error - i didnt tkae notice of it only that i couldnt run itunes, so i uninstalled and reinstalled itunes and it now runs as normal, but now it wont recognise my ipad saying that 64bit version is not installed - WHAT RUBBISH IS THIS? i downloaded and installed the 64bit version from applie and yet the error persists - can some one please tell me how i can get itunes to recognise my ipad again - this seems like such a ridiculous error for these two apple products to be conflicting with each other - please help
well i have found that i needed to not just uninstall itunes, but also apple mobile device support, bonjour apple software update and apple application support - uninstall all these and then install itunes - that seesm to have fixed it, though now i am sync fail - that's a different matter perhaps
-
When I begin typing the letters for the destination folder, before it would show a list of the targets matching so far and I was able to click on one to select it. Now I just get a generic text entry box with no intermediate feedback. I do use the add-ons muttkeys and keyconfig, but I didn't think this would affect things.
I wonder if you had another add-on. I use [https://addons.mozilla.org/en-US/thunderbird/addon/quick-folder-move/ Quick Folder Move] which does something similar to what you describe.
-
Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.
-
My entire iTunes library is missing on my two non-Apple computers. My libraries still exist on my iPad and iPhone though. I tried deauthorizing and then reauthorizing my devices, uninstalling and then reinstalling iTunes and nothing works. What happened?
See Empty/corrupt iTunes library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2 -
I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?
I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen
-
my ipad automatically shut down and now i lost al savings and in-app purchases the battery was on 50% what happened and can i get my purchases back
Hi there,
This seems very frustrating. An iPad can shut down randomally for many reasons, just like a computer can crash. If it begins to happen regularly, then do contact Apple, but there are no signs that your iPad is malfunctioning from just one shut down like this.
But, you should be able to get all your in-app purchases back. In some apps, there is a 'restore purchases' button, which will download all the purchases you made for free.
In some cases, you can tap to make the purchase again, and it will be downloaded at no charge, however this does not happen with consumable items such as coins and credits.
I reccomend contacting iTunes Store Support at the link below, they will take a closer look at your purchases and give you further steps on redeeming them. They may also refund you if they have been lost.
iTunes Store Support
You can also contact the developer of the app, and report the crash and missing purchases. If you tell me the app, I'll give you the relevent contact in the developers.
Other than that, sorry for the problems, and have a great day,
Nathan -
Help! I just installed the latest update on my IPhone 4 and now I can't access my podcasts. When I hit the podcast I on, the screen goes blank for a second and then opens to the home screen with all my icons. What happened?
Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.
-
I just got y ipad. It was working fine. suddenly I tried to use it and it wont turn on.
I just got my ipad. It was working fine. suddenly I tried to use it and it wont turn on. The battery is fine.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Happened to me once, about 6 months ago, and a reset got it working again.
-
Have ipad 1. Was working fine and was able to connect to the home Wi Fi network. Was running ios3.2.2. Upgrade to so called improved ios 4.3.2 and cheers the pad just doesnt join the home network. Tried all the tricks and trouble shooting listed in the forum and as guided by the technical support. Even restored the pad three times. Still the same problem remains. Have been advised to upgrade to 4.3.3, but am apprehensive- dont know what else will stop working. As such without WiFi my pad is as good as a piece of junk. Apple has some serious issues that require sorting out. If anyone can help me kindly do so.
Am having the same problem, and it appears NO-ONE on the thread either knows how to fix, or is willing to answer your or my question.
like you, my problem is absolutely linked to upgrading to 4.3.3. Everything worked fine for 10 months before that upgrade, and NOW well.........
Seems we iPad 1 users are no longer worthy!! Pity, had hoped this would have been an easy fix.
keeping fingers crossed some whizz will help us out -
My ipad will not swith on. It was working fine an hour earlier but when I press the power on button nothing happens. I have had it on charge just to be safe but no joy. This is a basic first version ipad. What options do I have?
Try a reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
Maybe you are looking for
-
Problems trying to retrieve data from R/3 using Java - RecordSetWrapper
Hello everyone! I am having problems retrieveing a result from r/3 using Connector Framework API. An ABAP consultant has created a ABAP program which returns an employee based on his or her personal number as an input. <b>When i run the AbstractPorta
-
Ipod touch stopped working completely
I have a 3rd Gen Ipod Touch and it was working fine until I hooked it up to my computer and started to update it. The screen went white and then it failed to update it and now my ipod touch wont even turn on. What do I do?
-
Loading same ELF multiple times
Hello, is it possible to load the same Executable Load File to card multiple times, to different Supplementary Security Domains? I tried it with JCOP31 card I have, but INSTALL for LOAD returns 69 85, Conditions of use not satisfied. Is this expected
-
Dear All, I developed an scat, when i choose flat file and start executed, instead of taking the values from flat file, my recording only getting executed again and again, where could be the error... Regards, Suresh Patipati.
-
With Skype now being used instead of Messenger for Office 365; Is there a way to link my Skype Business acount users with my Office 365 users? Have over 50 skype users and over 50 365 users and would like to consolidate the users / passwords so that