Sugestion for a higher level of security in APEX

I have noticed that APEX's developer interface supports page groups but you cannot use page groups to manage security. In most of the programs I build, it would be very useful to be able to blanket apply security settings over a group of settings in one location rather than having to go to each page. Example, I have a program where you have to be in a database table to be able to access a large part of it. I would like to be able to go one place group those pages together and then set an authorization scheme and or conditions that would apply to every page in that group and not just a single page. I would also to not just have this set the page level security but retain the ability to tighten up the security to fine tune the access to individual pages in the page grouping if required. I have many cases where I really need a compound security setup where multiple authorization schemes are checked. I know I can build new schemes but it would be more efficient to be able to layer them to form my security setup from lower levels of security (designed to cover a general group of pages) to strongest (designed to be applied to one or more specific pages) in a way where their effects would compound and you would need to pass each of them in order to be authorized to view the page.
I don't know if this is practical but its just a thought for the future.

Actually... yes, that is 1 of the 2 reasons I posted here.
Reason 1: That those that have the administrative and moderation access in this forum, also has access to the account information of the members that have signed up here. Which pretty much every forum software package grants the rights to those of the administrative/moderator staff. Or at least at a minimum could reply to the post, with the information that I am seeking.
Reason 2: This is a discussion forum, and I thought... people come here to help one another. And as I listed before, we tried the LEGAL contact page on Apple.com, no luck there. We tried going via iPhone developer program information contacts... dead end. And our legal contacts did in fact try to reach out to contacts that we also did have on file... and those also ended up in a dead end.
So excuse me for using yet another avenue of communicating with Apple and people who may also have or are going through the same situation.
As for the sarcastic replies... I know exactly why I am getting them, and hence why I returned them. I am absolutely no stranger to the anonymous world of discussion forums. But if you want to continue thinking that everything is just like slicing a piece of apple pie, and serving...
Then you seriously underestimating the complexity of issues like this.
All I did was come here to ask for some assistance when every known avenue has turned up to be a dead end. I thank the person that provided at least another avenue, that may lead to proper solution.
Grouch Marx was an interesting character. Last I checked, this wasn't a club. Or maybe it is, and you only want to keep to your own and forget the thousands if not magnitudes more of people that are just looking for a simple answer to a problem.

Similar Messages

Error: Maintain settlement rule of the sender for a higher level WBS

Hi,
I dont want to maintain the settlement rule for a higher level WBS. How can i configure this in such a way that i dont get the following error:" Maintain settlement rule of the sender" while doing CJ88. Maintaing a separate Settlement profile for a higher level WBS is an option but we are looking if something else could be done The problem is that there are no actuals booked against, say, level 2 WBS but when i execute CJ88, i get the aforesaid error. How can i ensure that only the lowest level WBS ask for the settlement rule and not the levels above it. I have already removed the Investment profile from the higher level WBS but still getting the same error.
Regards,
DPil

Hi,
It is a type Capex WBS and Biling element is not checked. In fact i get a warning while doing the settlement: WBS is neither a billing element nor an account assignment element.
Diagnosis
WBS element is not indicated as either an account assignment element or as a billing element in the master record.
System Response
The WBS element cannot be assigned to an account.
Procedure
Correct your entries or add the missing indicator to the master record for the WBS element.
But this is just a warning. On pressing enter i get the error :Maintain settlement rule of the sender "

My contacts and whats app messages are shown on my sister's iphone! How can I secure my iphone and have a high level of security and privacy! Her Contacts are shown in my iphone as well!!

I have and iphone 6 with iOS 8.1. My contacts and whats app messages are shown on my sister's iphone! She have iPhone 6 and and iOS as well. How can I secure my iphone and have a high level of security and privacy! Her Contacts are shown in my iphone as well! Setting in mac and iphone are a bit presice and sensitive. Is there any way to solve my issue and increase the safety, security and privacy in my iPhone and its data?

Your problem is that she used your icloud ID to connect to icloud and thus had all your data synced to her device. Contacts are not saved in a backup to icloud, since they are stored independently in the Contacts section of icloud. If someone deletes them, they are gone. If you had them on the PC would they be available in some backup you frequently make of the PC?

Whats level of secure have apex 3.0/3.1 on the web?

Hi all,
before build some web applications, need to know which
level of secure have apex on the web.
I was notice security settings as AUTHORISATION SCHEME (no, admin or guest)
and AUTENTIFICATION (not public or public)
Whats level of security have any pages whith NON PUBLIC settings for users?
Is any SSL sertificate related with apex?
thanks in advance
Gordan,

Joel,
I think that is exactly the problem. When I am am trying to do an installation, I need an end-to-end discussion of the task for the OS and version I am installing on. In looking through the forum, you can see many examples of people trying to configure an embedded PL/SQL gateway on 10g, editing httpd.conf, dads,conf or marvel.conf for the wrong version. I realize their may be a dozen or more scenarios, but the most common (like installing the entire bit on a network disconnected Windows laptop) should be covered end-to-end.
In addition the scenario of installing a 10g HTTP server from the companion CD is not covered.
Finally, it is completely unclear that the little "/" is needed at the end when defining the /i/ alias. Looks like just part of a UNIX file convention. No Windows example.
Warren

Returning the macbook for a higher level macbook?!?!??!

Hi all,
I just got my macbook 13 aluminum (2.0 GHz) on 14th April 2009 which was supposed to be delivered to me on 7th April, but because my office was closed so I got my macbook on 14th Arpil 2009. I would like to ask if I can return the current one and get a higher level one which is macbook 13 aluminum (2.4 GHz), as I found that the backlight keyboard is great and I want my macbook with faster performance. In fact, I returned my macbook to Apple before because there was a scratch on the keyboard, and Apple gave me a new macbook 13 aluminum which I am currently using now. So because I got my macbook on 14th instead of 7th because of the delivery problem, base on the 15 days policy, should the date starts on 7th or 14th? And am I suppose to return it and get a higher level one, i am willing to pay more for that.
Thanks!

You'll need to contact Apple on that. There are a few ways they can handle it. First of all, they usually consider your original purchase date for returns. If you have had yours replaced, the replacement date is not usually considered the original purchase date... so you're likely past your 14 day return period. If they make an exception, as you know, you typically have 14 days to make a return... that return period should commence on the date you accept delivery of the product. Provided you have documentation to show when the product was delivered, they may commence the 14 day period from that time. There is also generally a 10% restocking fee for returned products. The only way to know for sure is to contact Apple. This is just a user-to-user forum and Apple will not respond directly to comments posted here.

Design considerations for wrapping higher level process

So Ive used workflow now on a few projects and have become comfortable building/coding with it. Recently a discussion was started to design a new process to automate a part of the business Im in and there are several different departments, each with
their own different functions and processes that they perform. During this discussion, the thought came to me - why stop with just the "small" picture where I was using WF to contain and execute business rules, but also wrap the higher level
abstractions also.
For example, a department performs steps A, B and C. Each step might have some branching in it (if/then etc). Its only the "steps Im using workflow currently.
Above the department, there is another layer, lets call it "group". There would be several different groups, each with its own departments, some with the same name as other groups, but the internal structure might be different for a given
department between groups. So this means that if I modeled a department in one group, I cant assume I can reuse that department in another groups workflow.
My main unknown however, is how would a user interact with a workflow that was this high level. Abstracting higher levels, means users dont need to interact with or execute the whole workflow each time, only a part of it. So am I looking at pausing/resuming
the bigger workflow? How can I "skip" to a certain stage or area of a workflow, bypassing the stuff that has already been done?
Correct me if Im wrong, but this seems to be where I need to look at bookmarks?
In my case, something similar to an order in a shopping cart is what would be the input type for the bigger workflow. There are several different groups of users that have to set or add properties to associated objects (sql tables) related to the order
before it can be marked "complete".
How would you tie together a "wizard" type concept with workflow? This seems to be the type of model we are considering. A user takes an order a few steps, then another user from a different group/department adds some attributes and
the workflow/wizard continues a few more levels down. Finally, after all the rules have been matched and required data provided, the workflow can "finish".
Hope my description seems clear.

My main unknown however, is how would a user interact with a workflow that was this high level. Abstracting higher levels, means users dont need to interact with or execute the whole workflow each time, only a part of it. So am I looking at pausing/resuming
the bigger workflow? How can I "skip" to a certain stage or area of a workflow, bypassing the stuff that has already been done?
If you want to skip to certain state or bypass what stuff that has been done, you need give logic judgment first. Bookmarks are the mechanism that enables an activity to passively wait for input without holding onto a workflow thread. When an activity signals
that it is waiting for stimulus, it can create a bookmark. So bookmark is available for you during create this application.
Here are some workflow applications, see:
Workflow Application
hope it helps.
Regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Contact Point for a HIGHER level of development licensing for iPhone?

I know about the Enterprise Program.
I know about the Individual Developer Program.
I am looking for a contact point, for which our legal team could contact for a development/licensing agreement that doesn't fit within either of those two programs.
The company I work for is not small potatos and is a major player in the market we are focusing on. We are still far from of till we have a complete product, but our legal team wants to start discussions now with Apple... so everything can get worked out by the time we are ready to go.
So if one of the Apple folks see this, I am sure you can see my email address in my private profile... please email me directly. If someone else happens to know, please post it if you can. Even if it is just a number, that I can call to talk to someone... to get the next phone number to call.
I hope that all made sense.

Actually... yes, that is 1 of the 2 reasons I posted here.
Reason 1: That those that have the administrative and moderation access in this forum, also has access to the account information of the members that have signed up here. Which pretty much every forum software package grants the rights to those of the administrative/moderator staff. Or at least at a minimum could reply to the post, with the information that I am seeking.
Reason 2: This is a discussion forum, and I thought... people come here to help one another. And as I listed before, we tried the LEGAL contact page on Apple.com, no luck there. We tried going via iPhone developer program information contacts... dead end. And our legal contacts did in fact try to reach out to contacts that we also did have on file... and those also ended up in a dead end.
So excuse me for using yet another avenue of communicating with Apple and people who may also have or are going through the same situation.
As for the sarcastic replies... I know exactly why I am getting them, and hence why I returned them. I am absolutely no stranger to the anonymous world of discussion forums. But if you want to continue thinking that everything is just like slicing a piece of apple pie, and serving...
Then you seriously underestimating the complexity of issues like this.
All I did was come here to ask for some assistance when every known avenue has turned up to be a dead end. I thank the person that provided at least another avenue, that may lead to proper solution.
Grouch Marx was an interesting character. Last I checked, this wasn't a club. Or maybe it is, and you only want to keep to your own and forget the thousands if not magnitudes more of people that are just looking for a simple answer to a problem.

High level user and Low level user

Hi to all gurus,
How SAP diffrentiates between high level user and low level users?? I mean if the licences are for 25 high level user and 50 lowevel users, than how SAP will categorize the high level and low level user licenses?? Is there anyway where BASIS person has to specify??
Thanks and Regards,

Ask your SAP Account Manager, he will be happy to explain it for you.
Regards
Juan

High-level info about "workflow" in WLI

I'm looking for some high-level information about how WebLogic or WebLogic Integration
implements "workflow" functionality. I'm starting to pore through the WLI documentation,
but I'm having trouble finding concise high-level statements that talk about how
WLI supports or implements "workflow" functionality. Could someone point me to
a documentation roadmap that spells out these features?

You have to implement the method "applicationShouldOpenUntitledFile:" to respond "NO" in the Application delegate (see NSApplication class reference).
The MyDocument nib is loaded by the default NSDocumentController of the Application which is send a "newDocument:" message at startup.

Modify High Level User Interface

Respected Sir
i am using MIDP2.0 for my application. i want to modify some High
Level User Interface in my application. i mean that for TextBox
High Level User Interface i want to change(Modify) TextBox
predefined size , color,etc.... Is it Possible. if is then plz give
me some Clue.
thankx in advanse
Souvik

use setPreferredSize
and setLayout
functions
though for color there is nothing

What is MacKeeper - 911 for your Mac, Instant Mac cleanup, High-level security, Mac performance boost, Univ? I keep getting a pop up on my iMac?

What is MacKeeper - 911 for your Mac, Instant Mac cleanup, High-level security, Mac performance boost, Univ? I keep getting a pop up on my iMac?

Do not install MacKeeper (and how to uninstall it if you have):
https://discussions.apple.com/docs/DOC-6221
(Please note that references to the original developers, Zeobit, also now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.)
This recent court case is illuminating:
http://www.courthousenews.com/2014/01/21/64695.htm

High level process model for a Pulp & Paper Industry

Hi:
Someone can help me?, i'm looking for a organizational reference model for a pulp & paper company, under the alignment for best practices in to SAP R/3
I need know what is the best model for this kind company (chain value, macro process, business process, sub process...)
Thanks in advance
Omar Perea

hi,
thanks for yor points.
at that time it was opened.for me also it was warning the same, any way iam providing some more info on it. pls have a look on it.
Pulp and paper industry facing IT modernisation needs
Today most pulp and paper industry companies face serious financial challenges to increase return on investment and improve capital utilisation.
Companies are working to improve the efficiency of their supply chains and thereby reduce working capital, increase transaction velocity and improve inventory turnover. Mergers, acquisitions and alliances are reshaping the pulp and paper industry. Although the pulp and paper industry has invested heavily in IT systems, a large variety of old systems is often complex, inflexible in regard to integration and difficult to operate. As they reflect past organisations and business models, the streamlining of business processes is difficult.
Mega trends in the pulp and paper industry IT.
The pulp and paper industry is stepping into a new phase of business evolution driven by consolidation of industry, globalisation and ever-increasing competition. These market drivers are forcing the pulp and paper industry to put a greater focus on cost efficiency. These focuses are creating totally new challenges for the organisation, specifically in the IT area.
IT is increasingly becoming a commodity. This is a result of product standardisation and the popularity of off-the-shelf-products that facilitate the economies of scale. This phenomenon is also supported by increasing utilisation of competence resources in low-cost countries.
Managing change becomes more and more difficult. Very often companies face the need for new changes before they have seen the benefits of the previous ones. The cycle of change is short and the transformation environment becomes very complicated. On the other hand, IT becomes the tool in forcing business changes to happen. Often the only practical way to roll out new processes and practices is through the modernisation of information systems.
Like many other industries, the pulp and paper industry is concentrating on providing digitalised self-services as part of their business development.
Industry background
Since the consolidation and globalisation of the pulp and paper industry, there has been increasing pressure to continuously improve both its internal and external efficiency. In the large pulp and paper mills, production management systems typically consist of several different systems, which might also be from different suppliers. Systems are often isolated islands, which are successful in managing information of their own area but they lack the comprehensive information exploiting and sharing. This has resulted in a complex and inflexible architecture of legacy systems. These legacy systems are expensive to manage and difficult to develop to meet business requirements.
This pressure has led to massive IT investments and a continuous rebuild of the IT environments in order to meet efficiency challenges. Although many pulp and paper mills have invested a lot in building up their business supporting IT, especially Enterprise Resource Planning (ERP) systems, the return on investment is often difficult to measure. There is a lot of potential to improve usability of systems by harmonising business processes and integrating the systems more efficiently in order to better support actual business needs.
Most pulp and paper industry companies have thus come to a point where a more radical rebuild and renewal of the entire IT and network environment is required. Fortunately, the conditions for this have improved over the last few years, due largely to an increasing range of commercially available application platforms adopted for the pulp and paper industry, the acceptance of common industry standards, and the evolution of refined integration and migration methods.
Renewing and harmonising the companys operations and IT systems is still, however, a demanding undertaking. Securing continuous operations, while at the same time replacing the core systems and processes, requires a high level of expertise in pulp and paper industry processes and information technology. To complement the in-house competence, the pulp and paper industry will need to establish partnerships with outside solution providers and system integrators. To minimise risks and keep control of business-critical technology, new delivery models will be a necessity.
i am also giving some pdf sites pls go thru them
www.fpl.fs.fed.us/documnts/pdf2000/scott00c.pdf
www.bfe.admin.ch/php/modules/publikationen/stream.php?extlang=en&name=en_542051780.pdf
thanks
karthik

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

" plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
Shyam

Hi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam

How to Skip weight data from Sales order for Higher level BOM material

I have maintained a BOM at Item level with item category group LUMF.
And the higher level item is not subjected for pricing and costing. While creating the higher level Item I did not maintain weight for it. Now when I create a sales order due to the incompletion log system is asking to maintain Weight details for higher level item also.
But I donu2019t want to maintain weight for that item nor I want to remove net weight and gross wt from incompletion log.
While creating higher level material with material type FERT and I have maintained LUMF and all things are normal. Also tell me do I need to select any different material type or do I need to go for different settings ?
I hope my query is clear. Please ask if query is not clear.
Please Guruu2019s suggest me.

Hi ,
I do not know what a reference charactersitcs is,but there are all independant characeristics in terms of their values.
A guess it is because the VC data is changed after the sales order is created, the updated VC data is displayed properly only in VA02 or VA03 but other function modules fail to display the updated VC data.
I understand there is a relationship of instance -between sales order object and VC data object-which we need to update and then see the latest data.
Please let me know if anyone has debgged VA03 to know how the standard SAP program retrieves VC data in a sales order.
Thank you,
Hemant

Sugestion for a higher level of security in APEX

Similar Messages

Maybe you are looking for