Suitability of RAC for an application profile

Hi, were looking to possibly move to RAC as a solution for outgrowing our current servers capacity.
However, were unsure if the application profile is suited for RAC or not, specifically with regard to how our app currently uses the buffer cache in terms block contention, etc, etc.
Christo Kutrovsky has posted an excellent article here.
Anyone else got any tips or past experience of things we should be looking for to see if our app might be suitable before we undertake a proof of concept ?
Thanks in advance.

We discussed it with Christo quite often. Cache Fusion contention is one thing. Christo's approach is great to have some number to work with but there is more than that.
I generally recommend to try and separate your application on the components by traffic type and, better yet, by subsets of data components are working with. Sometime it's natural separation (like invoicing vs order processing) and sometimes it's artificial like hashing by IP address and etc. Thought, it might not be out of the box.
What application are you using? Home grown?
Also, don't forget about connection management - whether application will support TAF an/or FCF fully. Also, if you balance same workload across the nodes, what about run time load balancing?
Before going RAC, have you surely determined what's your current bottleneck and how RAC can help you?

Similar Messages

Hello, i'm a newbie,help !!! i try to use sync for an itinerant profile & have more stockage for my folders & applications.

in fact i liked to use some of 1T from yahoo for my lack of space on my hdd who's (almost) died.
i tried to "reanimate" him but till now i do silly things on it with testdisk (cilyndres & stuffs changed in geometry) soo... well how i'm on the road often i think a good solution can be a kind of server (freenas?)
can i use the cloud for put applications on it & use'it from the cloud? thanks for help
s'il y a des francophones charitables dans le coin je perffere le francais :) a+

No. Programs like Firefox won't run from the "cloud".

SSO Configuration for HWC applications

How to Configure SSO for HWC applications? we are configuring HTTP Authentication in SCC for Single SignOn but not been successful. Debugging the issue we found that MYSAPSSO2 cookie is not being returned.and SSO is not configured in SAP .
How to enable SSO in HWC apps.
What are the Other options to ask password in HWC apps( adding additional Security Layers)

Kunal raman
You/BASIS admin can check in that particular SAP system.
Go to Transacation RZ10
Select Instance Profile as shown in the below diagram
3
3 .Click on Display
4. Then you can see parameter name and its value as below
Rgrds,
Jitendra

Using Password_verify_function for EBS Application Schemas

HI,
As you all know, EBS Application Schemas (ex: AP, AR, GL, HR, etc) are associated with the DEFAULT profile and DEFAULT profile PASSWORD_VERIFY_FUNCTION is set to NULL. If I alter DEFAULT profile and set PASSWORD_VERIFY_FUNCTION to make use of a complex password function as below or create a custom profile with a custom password function, I am not able to change the Schemas password using FNDCPASS.. it throws the below error:
APP-FND-02704: Unable to alter user PRP to change password.
APP-FND-01564: ORACLE error 1403 in changepassword
Cause: changepassword failed due to ORA-01403: no data found.
The SQL statement being executed at the time of the error was: and was executed from the file &ERRFILE.
According to metalink note # 1306938.1, it is mentioned that the error can be resolved by setting PASSWORD_VERIFY_FUNCTION back to NULL, which I dont want to do as we wont be able to enforce complex password function for the application schemas.
Please suggest
Thanks & Regards
Adarsha

According to metalink note # 1306938.1, it is mentioned that the error can be resolved by setting PASSWORD_VERIFY_FUNCTION back to NULL, which I dont want to do as we wont be able to enforce complex password function for the application schemas.If the solution in this doc does not help then please log a SR.
Thanks,
Hussein

How can i create datasource on apache server for ADF application?

Hi All,
i my use case i have created simple adf application using ADF BC and want to deploy on Apache server 6.x.
So my question is that how can i create Data Source i have goggling and find two different way to do this.
1. write following line of code on apache server conf/Context.xml file.
<Resource name="jdbc/TestDB" auth="Container"
              type="javax.sql.DataSource"
               driverClassName="oracle.jdbc.OracleDriver"
              url="jdbc:oracle:thin:@localhost:dst"
              username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
              maxWait="-1"/>
but when i have used this way i got following exception.
org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection
check link-
https://forums.oracle.com/thread/2564233
2. write following line of code apache conf/Server.xml file
<GlobalNamingResources>
    
    <Resource name="UserDatabase" auth="Container"
              type="org.apache.catalina.UserDatabase"
              description="User database that can be updated and saved"
              factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
              pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/TestDB" auth="Container"
              type="oracle.jdbc.pool.OracleDataSource"
              description="User database that can be updated and saved"
              driverClassName="oracle.jdbc.driver.OracleDriver"
              factory="oracle.jdbc.pool.OracleDataSourceFactory"
              url="jdbc:oracle:thin:@//172.31.43.207:1521:dst"
              username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
              maxWait="-1"   />
</GlobalNamingResources>
and add this line in context.xml file inside <context> tag
<ResourceLink global="jdbc/TestDB" name="jdbc/TestDB" type="oracle.jdbc.pool.OracleDataSource"/>
but when i have run application i have got following error
log-
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
at java.lang.Thread.run(Thread.java:662)
Aug 2, 2013 5:17:21 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
at java.lang.Thread.run(Thread.java:662)
so what is the solution how to create datasource on apche server which suitable for adf application?
when i test data source using following code used 1. way as i mentioned above its running fine bt not for second.
<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<sql:query var="rs" dataSource="jdbc/TestDB">
select empname from pay_emphdr where empcd='JK1306'
</sql:query>
<html>
<head>
    <title>DB Test</title>
</head>
<body>
<h2>Results</h2>
<c:forEach var="row" items="${rs.rows}">
    Foo ${row.empname}<br/>
</c:forEach>
</body>
</html>
please help me. it is very urgent.
thanks in Advance
Manish

Hi Lindalnci
i have already tried this tutorial and in my post i have defined first way to do using this procedure.
in that case i have got following exception as i have mentioned above
org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection

Creating a new application profile

Hi Hyperion Gurus,
Need your advice on an issue we are facing now:
In our current application (HFM 11.1.2.2. EPMA), we have created our application profile with only English as the language. We have 3 applications residing on our current profile.
We now have a requirement as to include Japanese as a language. I am aware that I can not make changes to the alias dimension in the existing application. This means that we will have to create a new application profile.
My question is: What will happen to the existing shared library that we use for our current applications? When I create a new application will it impact the old ones?
Any thoughts and ideas are greatly appreciated!
Thanks,
Steffi.

Hi Thanos,
so I did create a new application profile and included the languages I needed. And when I created the application, the Alias dimension is blank.
Here are the steps that I followed:
1. Create a new application profile from the desktop client.
2. Opened work space and created New application from Administer > Consolidation Administration.
3. Registered the application to Shared Services.
4. Transformed the classic app to EPMA in order to use the Shared library
Not sure what I am missing. I have attached a screenshot of the dimension library from my new application.

Help needed in writing installers for swing application

Hi ,
I want to write an installer for one of our home grown profiler tool. I need to write the installer for different platforms such as windows,linux,solaris,HP-UX.
Does anybody have any idea of how to go ahead in writing installations. Share if there is any good links such as tutorials as well is thr any opensource tool (similar to installsheild) to write installers . As well following is the tentative algorithm for my install sheild
1. Create a home dir for the tool and put all the application files in tht.
2. Installing a 3rd party jar and make a home for it.
3. Option for user to select the features(i hv 2 features. user can either select both or select individual feature) to be installed.
4. Select the appserver home if any. On selection i hv to update the classpath in the startup batch file for the application(This is the toughest step i beleive bcoz each appserver have different folder structures and different startup batch files).

Tried obtaining the output using SQL and the result is as follows:
SQL> WITH T AS
2 (
3 SELECT 1 COL1 FROM DUAL
4 UNION
5 SELECT 2 COL1 FROM DUAL
6 UNION
7 SELECT 3 COL1 FROM DUAL
8 UNION
9 SELECT 4 COL1 FROM DUAL
10 UNION
11 SELECT 5 COL1 FROM DUAL
12 UNION
13 SELECT 8 COL1 FROM DUAL
14 UNION
15 SELECT 9 COL1 FROM DUAL
16 UNION
17 SELECT 10 COL1 FROM DUAL
18 UNION
19 SELECT 13 COL1 FROM DUAL
20 UNION
21 SELECT 14 COL1 FROM DUAL
22 UNION
23 SELECT 15 COL1 FROM DUAL
24 UNION
25 SELECT 16 COL1 FROM DUAL
26 UNION
27 SELECT 23 COL1 FROM DUAL
28 UNION
29 SELECT 24 COL1 FROM DUAL
30 )
31 SELECT OUTPUT FROM
32 (
33 SELECT DECODE(COL3,NULL,COL1, COL2) || '-' || LEAD(DECODE(COL3,NULL,COL3, COL1)) OVER (ORDER BY DECODE(COL3,NULL,COL1, COL2)) OUTPUT FROM
34 (
35 SELECT COL1, LEAD(COL1) OVER (ORDER BY COL1) COL2, LAG(COL1) OVER (ORDER BY COL1) COL3 FROM T
36 )
37 WHERE
38 (COL2 - COL1 > 1 OR COL2 IS NULL OR COL3 IS NULL)
39 )
40 WHERE OUTPUT != '-';
OUTPUT
1-5
8-10
13-16
23-24

Windows 7 very slow logon, Waiting for the User Profile Service, winlogon event 6006

Hello,
Every so often one of our Windows 7 clients which is not normally having any delay at logon will take a very long time to login. This may be 10 or 20 minutes or up to an hour in some cases.
Typically the event log will contain entries like
The winlogon notification subscriber <Profiles> took 572 second(s) to handle the notification event (Logon).
There is no further information available from Event Log Online Help, nor any additional detail as to why the logon event was so slow. During the delay the user will just see "Waiting for the User Profile Service" on their screen.
We first started seeing this problem with Windows Vista and if anything the situation has not improved since then. It has never happened with any of our Windows XP users.
We are currently planning a migration of computers to Windows 7 but stuff like this which has not been resolved in Windows over a 2 year period will stall that migration. The least improvement is to increase the event notification to give a lot more
information on why the user profile processing has stalled.

Hi,
When did the issue begin to occur? Did it occur after installing certain application or applying certain policy?
To troubleshoot the issue, please perform the following step.
1. Restart the machine in Safe Mode with Networking to check whether the system can login quicker.
2. Type “gpedit.msc” in Search box and press Enter. Navigate to the following location:
Computer Configuration->Administrative Templates->System->Logon
Please double click “Always wait for the network at computer startup and logon” policy and disable it.
3. Perform a
Clean Boot to check the result.
Thanks,
Novak

How to configure Broadcast messaging for IC Webclient profile

Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ram

Hi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha

AADSTS50011: The reply address does not match the reply addresses configured for the application

Can anyone tell me where to update the reply address?
I have AD synced from on-prem to Azure, then I setup a website on azurewebsites.net, then created a CNAME record from portal.mydomain.com to portal.azurewebsites.net. When I try to login using portal.mydomain.com I get:
AADSTS50011: The reply address does not match the reply addresses configured for the application.
Can anyone help? Thanks
Frank Russo

Hi Frank69,
Thanks for posting here!
It appears to me that the application is unable to find the URL you have configured on Azure or could be missing from the list. As a result the application is attempting to authenticate against AAD but failing to match the URl it wants.
I would suggest you to re-configure your AAD application on Azure and set one or more reply URLs.
Reference link:
http://www.matvelloso.com/2015/01/30/troubleshooting-common-azure-active-directory-errors/
Regards,
Sadiqh
Disclaimer: This response contains a reference to a third party World Wide Web site.
Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there.
There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

9i Jdeveloper for Oracle Applications gives error when running hello world

The following is the error
Exception Details.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = oracle.apps.jtf.cache.CacheLoaderNotFoundException; (Could not lookup message because there is no database connection)
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:862)
     at OAErrorPage.jspService(OAErrorPage.jsp:35)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:119)
     at com.evermind.server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:547)
     at com.evermind.server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:518)
     at test_fwktutorial._jspService(test_fwktutorial.jsp:72)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.apps.jtf.cache.CacheLoaderNotFoundException
     at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:3236)
     at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:3203)
     at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:248)
     at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1293)
     at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384)
     at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210)
     at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169)
     at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148)
     at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1147)
     at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1008)
     at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:977)
     at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:944)
     at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:931)
     at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:570)
     at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:873)
     at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:858)
     at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:827)
     at oracle.apps.fnd.common.AppsContext.<init>(AppsContext.java:686)
     at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:846)
     at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351)
     at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144)
     at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80)
     at test_fwktutorial._jspService(test_fwktutorial.jsp:45)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
oracle.apps.jtf.cache.CacheLoaderNotFoundException
     at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:3236)
     at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:3203)
     at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:248)
     at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1293)
     at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384)
     at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210)
     at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169)
     at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148)
     at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1147)
     at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1008)
     at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:977)
     at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:944)
     at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:931)
     at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:570)
     at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:873)
     at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:858)
     at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:827)
     at oracle.apps.fnd.common.AppsContext.<init>(AppsContext.java:686)
     at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:846)
     at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351)
     at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144)
     at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80)
     at test_fwktutorial._jspService(test_fwktutorial.jsp:45)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
THe following is the OAFramework version
OA Framework Version InformationOA Framework Version 11.5.10.5RUP.
MDS Version 9.0.5.4.89 (build 555)
UIX Version 2.2.24.1.0
BC4J Version 9.0.3.13.97
I use JDeveloper that comes with the patch 4725670
The project settings for Oracle applications, the dbc file, userid/password, responsibility details are correctly set.
Data base connection is also defined.
I tried the patch 6012619 as well. No change and the same error
Any clues please.

user589898 ,
Search on old threads before posting issues. Search on keyword CacheLoaderNotFoundException and you will find this issue has been discussed earlier.
--Shiv

Can w use rsync for Business Continuity for Oracle Applications Release12 ?

Hi ,
One of our customer has implemented Oracle EBS R12 (12.0.6) on HP-UX (IA).
Database Tier on a Two Node Oracle Database 10g R2 RAC
Application Tier on Two Node using Shared APPL_TOP with Load Balancer.
They want to implement DR site using Oracle Data Guard (RAC to Non-RAC).
I was referring to Note: 452056.1 +( Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC )+.
In this note its mentioned that:
If you wish to synchronize your concurrent manager log and out files between production and standby, you need to create folders matching to the APPLCSF environment variables for each others......................... For example, set up an rsync job similar to the below example in cron, to run every few minutes.
Can we use rsync for Production systems without any issues? Customer is concerned about using freeware on their Production systems.
Rgds,
Thiru.

Thiru,
Can we use rsync for Production systems without any issues? Customer is concerned about using freeware on their Production systems.You can use it with no issues. Or, you could use any other copy tool to copy those files.
Thanks,
Hussein

Is there a suitable porlet-addin for JDeveloper 10g 10.1.3EA

Is there a suitable porlet-addin for JDeveloper 10g 10.1.3EA and if so where might I find it.
The one I found produces the following error:
Severe(2,369): No class def found for addin oracle.webdb.jdev.PortletDevelopmentAddin
OR
Is there a workaround this problem?
Thanks in advance.

JDeveloper10.1.2 supports the portlet addin.
http://www.oracle.com/technology/products/ias/portal/html/jdev.addin.install.guide.html
A portlet may also be created in JDeveloper 10.1.3 by adding a portlet.xml configuration file to a web application.

S there a suitable porlet-addin for JDeveloper 10g 10.1.3EA

Is there a suitable porlet-addin for JDeveloper 10g 10.1.3EA and if so where might I find it.
The one I found produces the following error:
Severe(2,369): No class def found for addin oracle.webdb.jdev.PortletDevelopmentAddin
OR
Is there a workaround this problem?
Thanks in advance.

JDeveloper10.1.2 supports the portlet addin.
http://www.oracle.com/technology/products/ias/portal/html/jdev.addin.install.guide.html
A portlet may also be created in JDeveloper 10.1.3 by adding a portlet.xml configuration file to a web application.

JCo connection for the application data

Dear All,
Now, we configure BP for MSS. When we set JCo connection for the application data, from this link http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm we selected the method "Ticket".
When we run the page in "Team" area, we found some errors as follow:
- You do not have the authorization to start service sap.com/pcui_gp~isr/IsrStatusoverview
- You do not have the authorization to start service sap.com/mssreccand/CandidateStatusOverview
- Pages about "Employee Information" display Blank iViews.
But if we set JCo connection for application data by using "User/Password" method (UserID have "SAP_ALL" profile in back-end system), the application work fine.
Kindy advise us which method should be used to set JCo connection (Ticket or User/Password).
If the method should be "User/Password", please advise authorization and user type for UserID that be used to map JCo connection.
Thank you very much,
Anek.

Hi,
Go through the contents in,
http://help.sap.com/saphelp_ep60sp2/helpdata/en/8f/67d27676ace84080964d4c4223bb3c/content.htm
Hope this helps !
Regards
Srinivasan T

Suitability of RAC for an application profile

Similar Messages

Maybe you are looking for