Sum in words in marketing documents

Hi,
I'm using SAP Business one 2005A, I'm facing this problem when i print the Document Total in words.
The system will print out "One Thousand Two Hundred and Fifty Hundredths" instead of "One Thousand Two Hundred and Fifty Cents".
I define my hundredth in english as Cents in the currency table.
Any work around?
Thank you.
Regards,
Foong Yee

Hi Virasak,
2005A don't have thai language so I don't think is able to print out the thai language. The language is according to system language.
Administration>System Initialiazation>General Setting>Display at the language to determine the language.
Hope this will help.
Regards,
Foong Yee

Similar Messages

Sum in words for created document

Hi Experts,
I facing the critical issue which creating purchase order and getting total amount in words format its executing correctly in system default template but its not executing correcly in created Layout such as
GBP : 129
One hundred twenty nine pounds in system format
One hundred twenty nine in My Layout .....
why this difference occuring and pounds not getting , can any one help me to know the reason ... urgent pls...
karthi

hi all,
I have checked system currency, in test database also pre checked by creating new BP in GBP and posted in purchase order but it still showing such as GBP 25 = Twenty five and its corresponding symbol...
how this getting change for own template...?
pls give me solution...
karthi

Incoming payment from Sales Order marketing document

Hi
Without doubt, one of the most popular requests our clients make is to have the ability to receive money during the sales order process - in other words, without the need to open up a new marketing document (ie; down-payment or reserve invoice screen).

hai,
A is also fine. If the payment terms is applicable for both customer as well as vendor, then the system will block for payment and in FBL5N also system will show with block indicator A. Or
Try to block in same FBL5N, select particular document, goto environment in menupath select change document and block it and then save. Again run FBL5N check the block indicator.
There is no additional configuration is required apart from my first reply.
govind.
Message was edited by:
govindaraj s

How do I make Word and Excel Documents readable to PC users that cannot open them

How do I make Word and Excel Documents readable to PC users that cannot open them

Be sure to save them in the Office 2007 format as .doc or .xls files.

Get error when preview marketing documents by using crystal report layout

Hi experts,
I want to switch to using Crystal Report for marketing documents layout. I have import Sales Quotation u2013 Generic (CR) layout which provided by XX-1.2.b1p package. I can preview added records but it doesn't work on drafting documents and saved drafts. The system prompt u201CThe system cannot find the path specifiedu201D and u201CObject reference not set to an instance of an objectu201D. On the same server, it was working fine in our other company database. I don't think this is the problem of database location setting in Crystal Report. Can anyone give me advices, thanks!
Regards,
Ivan

Hi! Rahul,
Thank you for your reply first. Your method doesn't work in my case. Can you tell me the steps of creating a new layout for added records and draft documents. I have created a quotation layout which work with added records only, the steps has been show below and please comments, thanks.
1. In Crystal Report > new blank report > create new connection > Choose "SAP Business One" > Select OQUT under "B1 Tables".
2. Insert "CardName" field to report > Create DocKey@ parameter and set it equal to DocEntry in select expert record function
3. Click Add-ins > SAP Business One > Save > Choose company database and input manager password.
Regards,
Ivan

How can I sort the words in a document into an alphabetical list?

How can I sort the words in a document into an alphabetical list? Thanks!

writer888 wrote:
How can I sort the words in a document into an alphabetical list? Thanks!
Copy the words to the Mac's clipboard (Edit menu> Copy)
Paste into TextEdit
Next open the Edit > Find > Find window in Text Edit.
Highlight a space between two words and Edit menu > copy, paste into the Find field
Next create a return in the middle of your text and copy that and paste into the Replace field
Click Replace All.
Now Edit > Select All and Edit > Copy
Open a Spreadsheet program with Sort ability and paste into the second column cell from the top
place a "a" into the top column cell, select the entire colum
Sort desending order
Now if you need it out of spreadsheet format, then your going to need to copy just the data cells (not the entire column to avoid problems) and Paste "Special" as unformatted text into a word processing program
If you need to get rid of the Returns, do the opposite you did in Text Edit, replace the Returns with Spaces
A chore, but it's rare one needs to sort words into alaphabetical order.
FYI, I used TextEdit and the free LibreOffice (Spreadsheet and Word Processing) for the above effects.

While creating the UDF in the Marketing Document ERRor

Dear to ALL
Please give me some solution to the my problem
My problem is
While i am creating the UDF in the marketing document I am getting the error message 131-183 could not able to create the data base.
Any one can help me out releated to this problem
Please .....................................................
With regards to all ........................
Gopi J N
[email protected]
[email protected]

Hi JN,
There is no limit in number of UDF but in record length. This a SQL
Server 2000 limitation which establish 8060 bytes as maximum for a
record. This limitation does not exist in MSSQL 2005.
Therefore, in order to be able to add more UDFs you should reduce the
size of the existing UDFs or upgrade the system to MSSQL 2005.
Please refer to the SAP note 816387
The solution to this problem is to decrease the size of the
User Defined Fields. Either by decreasing the length or changing
the definition of "Alpahnumeric" fields to Text, or the last resort
is to remove the fields.
All these actions have to be done via the SAP Business One application.
The change of field type alphanumeric to Text might influence the
performance.

Trade discount in marketing document

Dear SAP Prod. Dev.Col. Teams,
Currently trade discount in marketing document is not posted to journal entry. The customer want it because they want to have the discount is applied in the marketing document rather than in the payment document.
Manual journal entry is not acceptable since it will add new effort meanwhile the software like SAP B1 is intended to ease the daily working and make their working time efficient and effectively.
Please give a concern to this request.
Thanks and Rgds,

I managed to solve it using WA

Need suggestion for searching words in a document

Is there any option to search the words in a document, where I want to make a user designed words or phrases saved itself in a PDF docment. For e.g I need to search the data with words like Salary, Compensation, Remuneration, etc in an annual report (PDF Version). For which I need to type these words hundreds of times everyday. So if I have a option to upload these words in the adobe reader itself it will save most of my time. please help me with ur opinions and suggestions.

Nothing in Reader itself. A macro program might help.

How do I convert a pdf file to a Word or Excel document?

How do I convert a pdf file to a Word or Excel document using the Adobe software?

Hi,
There are a few ways to export your PDF file to Word or Excel files.
Using Web UI:
Log into https://exportpdf.acrobat.com/signin.html with your Adobe ID and password
Select “Export from PDF”
Click “Select Files” button then choose your PDF file
Select the format from the list below
Check ON “Recognized text in” if your PDF file is scanned images to recognize the image to text
Click “Export” button
Click “Download” button in the progress bar after completion of exporting to download the file to your computer.
Using Adobe Reader:
Launch Adobe Reader X or Reader XI
Select “Tools” and click “Sign In” link to sign in with your Adobe ID and password
Select “Export PDF” then click “Select PDF file” link
Select format from “Convert To”
Click “Convert”
Click “Download Converted File” link to download the file to your computer after the process is completed.
Download Files:
All exported files are stored at https://files.acrobat.com and you can login with your Adobe ID and password.
Or at Web UI you can click “FILES” next to “TOOLS” at top or click “View All files” in the file list of “Export from PDF” tool( or “Convert to PDF” or “Combine Files” tools for PDF Pack users) that will redirect you to the above site(https://files.acrobat.com)
From Reader you can click “Store Files” under “Tools” and click the link of “Open Acrobat.com Files”
Hisami

Ship to party and Bill to party not reflecting in marketing documents

Hi,
Ship to party and Bill to party not reflecting in marketing documents inspite of defining it in BP Master data.why does it happen.we are on 8.8 version and this is happening in Livedatabase.
Thanks,
Mansoor Baig

Hi Mansoor,
Is this for new transactions or existing ones that went thru the 8.8 upgrade? Is this for new BP that the address doesn't show or existing (if you have other transactions with no address problem then it shouldn't be the address format setup unless something happened in the upgrade).
Heather

Remove or Hiding Marketing Documents from SAP Business One.

Hi Everyone,
Is there any way by which a marketing document in SAP Business One can be deleted or be hidden. For example in a Sales A/R module the the client does not want to use or also view the AR downpayment request or AR down payment invoice as it is not required for his business. What is the way to hide or remove it from the user point also during authorization.
I am also seeing that when in the user autorization I am giving full authorization for e.g in Purchase A/P Module - Purchase Order and Good Reciept PO only and when logging in by that assigned user I am only seeing the Purchase Order and Good Reciept PO that's absolutely fine but when I am going in Form Settings and and selecting visible for all the modules then all the marketing documents are coming back which should not come. Is there any way to block the form settings in this moment and when using the tab apply authorization in forms settings the defined authorized documents are comming but if one again clicks on form settings and make all the marketing document visible then again all the marketing documents are comming back which I don't want.
Please let me know your valuable comments in this regard.
Thanks and Regards

Kawish,
<Font Color="Blue" Size=3> To Hide the module from the User Main Menu
</Font>
Login as that user and click Form settings and Uncheck Visible for the
Using Authorization > General > Document Settings (change this to No Authorization)
This would prevent the user access to Form Settings.
<Font Color="Blue" Size=3> To Disable access to a Module
</Font>
Use Administration > System Initialization > Authorizations > Additional authorization creator. chose a name and in the Form ID area add the Form number. ( you can get the form number when you open the module and from the View menu enable system information, you can see the Forum number on the Task Bar)
Suda

Storing MS-Word and PDF documents in database uploaded through APEX

I want to allow users to upload MS-Word and PDF documents they have created / edited outside of the APEX app for storage in the database along with the other app data.
I know that I should use a file browse item in a region for this purpose.
I have a some questions:
1. What database datatype is best for storing MS-Word and PDF docs? CLOB?
2. How can the user see that the file has been uploaded? In other words, how can they see that the filename has been uploaded? I want to show this on the page for later viewing. I have uploaded a document, but later, I have no way to see that the document has in fact been uploaded. From the APEX page, the file browse item does not indicate whether or not a file has previously been uploaded.
3. How can the user download the previously uploaded document?
4. Is there a way to give users the capability to edit a document in an APEX app where they can do MS-Word-like editing (font size, font type, bold, italics, etc.)?
I know I've asked a lot here and I appreciate your input.
-Reid

In my case, I am uploading screenshots of my application and then displaying them. You can feel free to use it if you want, the code was mostly taken from examples of file uploads posted by others. Here is some code to get you started:
File Table description
CREATE TABLE FILE_UPLOAD
   (name           VARCHAR2(4000) PRIMARY KEY,
    subject        VARCHAR2(4000),
    id             NUMBER,
    blob_content   BLOB,
    mime_type      VARCHAR2(4000),
    PAGE_ID        NUMBER);File Upload Procedure
IF ( :P20_FILE_NAME is not null ) THEN
     INSERT INTO FILE_UPLOAD (id, NAME, SUBJECT, BLOB_CONTENT, MIME_TYPE, PAGE_ID)
      SELECT ID,:P20_FILE_NAME,:P20_SUBJECT, blob_content, mime_type, :P20_PAGE_ID
            FROM APEX_APPLICATION_FILES
            WHERE name = :P20_FILE_NAME;
   DELETE from APEX_APPLICATION_FILES WHERE name = :P20_FILE_NAME;
END IF;Download Image Procedure Definition
CREATE OR REPLACE PROCEDURE download_my_file(p_file in number) AS
        v_mime VARCHAR2(48);
        v_length NUMBER;
        v_file_name VARCHAR2(2000);
        Lob_loc BLOB;
BEGIN
SELECT MIME_TYPE, BLOB_CONTENT, name,DBMS_LOB.GETLENGTH(blob_content)
         INTO v_mime,lob_loc,v_file_name,v_length
    FROM FILE_UPLOAD
   WHERE id = p_file;
    -- set up HTTP header
    -- use an NVL around the mime type and
    -- if it is a null set it to application/octect
    -- application/octect may launch a download window from windows
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
    -- set the size so the browser knows how much to download
htp.p('Content-length: ' || v_length);
    -- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(v_file_name,instr(v_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
    -- close the headers
owa_util.http_header_close;
    -- download the BLOB
wpg_docload.download_file( Lob_loc );
end download_my_file;
/make sure to grant the procedure rights for use by anyone
GRANT EXECUTE ON download_my_file TO PUBLICDisplay Image Procedure Definition
create or replace PROCEDURE "DISPLAY_IMAGE"
inID NUMBER
AS
vMIME VARCHAR2(48);
vLENGTH NUMBER;
vFILENAME VARCHAR2(2000);
vBLOB BLOB;
BEGIN
SELECT MIME_TYPE, BLOB_CONTENT, NAME, DBMS_LOB.GETLENGTH(BLOB_CONTENT)
    INTO vMIME, vBLOB, vFILENAME, vLENGTH
FROM FILE_UPLOAD
WHERE ID = inID;
owa_util.mime_header(nvl(vMIME, 'application/octet'), FALSE);
htp.p('Content-length: ' || vLENGTH);
owa_util.http_header_close;
wpg_docload.download_file(vBLOB);
END;
/Again, make sure everyone has rights to execute the procedure.
GRANT EXECUTE ON DISPLAY_IMAGE TO PUBLICThis doesn't create an editor inside the browser, it just creates a simple upload/display process. For a WYSIWYG editor that handles PDF or Docs, you'll need something far more sophisticated, and I can't suggest anything there.

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank you

Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry

What do I need to do to open Office (word AND excel) documents, PowerPC issues etc. They don't open on iWork '08. Office 2011? Please advise :-)

What do I need to do to open Office 2004 (word AND excel) documents? PowerPC issues etc. They don't open on iWork '08. Happy to upgrade to iWork or Office just to be able to access my docs from Office 2004 again - please can someone advise? Cheers.

Hi - thanks for this info. Actually I have downloaded a 30-day trial of MS Office for Mac 2011 and it reads/writes. But I was expecting that if I saved it again, either as xls oe xlsx, then I would be able to open the newly-saved document in iWorks '08. This is not the case, any ideas why? cheers, Matt.

Sum in words in marketing documents

Similar Messages

Maybe you are looking for