Summarized Analysis - Variance Analysis report Problem

Hi Guru's
When Executing the Report "S_ALR_87013139 " of Order Variance analysis - Sumarization Report we are not able to fetch any data for the current year.
But when we are checking for 2008 we are able to fetch some data but with wrong values
We wanted to know whether any additional configuration has to be done to fetch that data
Your help will be greatly appreicated
<< Moderator message - Please do not promise points >>
thanks in advance
Best Regards,
Ravi Reddy
Edited by: Rob Burbank on Dec 15, 2010 5:05 PM

Hi Christian
Thanks for your reply i have one more doubt regarding the report " 7-KA2-K-P1" to modify that report does it generate a Workbench Request or a Customizing request.
I am asking this because as per my Clinets requirement i need to add few more columns.
Best Regards,
Ravi Reddy

Similar Messages

Variance Analysis Report

Hi
The users wants a Variance analysis report in such a way say there a is variance from target to acutal by cost elements detail of from where that variance come from other than from general variances categories.
Say for ex: if it is a input quantity variance of 10, they want a report showing from were that variance come from, in more detail. They don't want to go to every order at month end to look and analyse every single PO to see why the variances, is it feasible in SAP?
Thank you,
Nivi

These reports run on summarized values. Please run KKRV for summarization by plant for the given periods.

How to read the Variance Analysis report S_ALR_87013139, Pdt cost by Order

Hi,
Could someone tell me how to read the variance analysis report, S_ALR_87013139 - Cumulative for product cost by order. The report has the following fields, Target (Debits),     Actual (Debits),     Scrap,     Var. Without Scrap,     Work in Process(WIP),     Control Costs.
I am looking to find how the numbers add up.
Thanks for your help.
Ram
Message was edited by:
        Ram R

Thanks Sridhar,
When I analyse the report S_ALR_87013139 - Cumulative , for a product for a period (with no scrap), I get the following
Target (Deb) -   46,855.55
Act (Deb) - 58,315.87
Scrap - 0.00
Var W/O- Scrap - 11,269
WIP- 0
Control Cost - 0
Here Actual - Target is not equal to Variance. What could be the issue?
Could you please tell me how SAP would update this report with target & actual costs with respect to open production orders, carried over from previous periods.
Thanks,
Ram

Standard SAP report for variance analysis of SD and MM

Dear All,
I want the standard SAP report for the vendors and customer varaiance analysis for the posting done in MM and SD with the GL balance in FI .It should be same as the report we get from the transaction code MB5L.
Thanks in advance
Meruta

HI,
The 1AB library contains reports for variance analyses. This is an important report for Cost Center Accounting (CO-OM-CCA) supplied in the SAP R/3 System. Additional information for report can be found in the documentation for the reports. Choose Extras->Documentation from the report itself.
Hope I had been able to help you out. Please assign points.
Rgds
Manish

FDM 9312 Variance Analysis report and columns 1 off in xls

Hi,
I have a variance analysis report in FDM and when i run in HTML and PDF, all the columns are aligned/formatted fine. But when i run it in xls, the columns are one off. Has anyone seen this before or experienced this.
Thanks,
Azmat Bhatti

This is due to formatting within Excel. You can try to adjust the report via the report designer in the workbench. It may not be possible to run the report in Excel with the formatting you are expecting.

Price Variance Analysis

Hi,
Im developing the Price Variance Analysis. How ever im coming across a problem. In the report the client want Unit Price posted from PO and Invoices. On the PO the Unit Price is present. I can bring the unit price directly from the PO. But on the invoice the unit price is not calculated.
Where do i calculate that and how do i bring it in the report?
Also
The Client wants one column for PO/INVOICE, how can i bring both these fields in one column and is there a way we can put a condition such as:
If PO bring in Unit Price, and if Invoice calculate the price.
how can this be done? or is there another way of doing this?
Thanks
Edited by: DANIEL GREEN on Feb 27, 2008 10:38 PM

i found a InfoCube that might be able to help me:
Global Spend (Point-to-Point Connection)
Technical Name: 0BBP_C01
This cube does not have certain key figures such as:
0BBP_DS1_CK012: Net Invoice Price
0BBP_DS1_CK018: Net Price of Purchase Order
0BBP_DS1_CK014: Unit Price Variance
Can i add these key figures into that Cube?
would that affect anything, and would this cube be feasible for Price Variance Analysis?

Variance analysis

Hi,
Can someone suggest a good report for variance analysis in cost object controlling.
Thank you
Message was edited by:
Ram R

Hi Ram
For variance analysis you can use report S_ALR_87013127 - in Object list node in cost object controlling.
This is one of the best available reports u can use since it gives variances for all order types in all plants and company codes
Once u select the parameters, go to the layout and select all variances fields listed and save your layout so that u dont have to do it everytime.
I have been providing this to clients and is used for analysis and corrections to orders etc.
Also, there are quite a few reports not only on variance analysis but on WIP but in most of these reports the selection parameter is a single order instead of all orders for a plant which limits the usage.
Let me know if you need any more clarifications
And please assign points as a way to say thanks

Oracle Financials or Hyperion Planning for variance analysis??

We are considering Hyperion Planning for our Departmental budgets/forecasts and I'm have a disagreement with a few piers. Was hoping you could help. It's my contention that the budgets/forecasts AND actuals should be populated in Hyperion Planning. A few of my piers contend that the budgets/forecats should be housed in Hyperion Planning and pushed down to Oracle Financials for variance analysis - in order to provide drill back capability into the transacations that caused the variance.
Since H.P. is a consolidated system, I would think it's impossible to budget at a summary account level in H.P. and push it to base level/transaction level within Oracle Financials (one to many). In my view, the actuals should flow up from Oracle Financials, via FDM, into H.P. where variance analysis can take place? I would think drill back capability could be provided via FDM within Planning?
Anyway, was hoping to get your thoughts.

Hi,
We are currently in the final phase of implementing Oracle Financials and Hyperion for the same purpose that you have described in your post. We use Oracle Financials to record actuals and then transfer it to Hyperion under the scenario 'Actual'. While the budget/forecast data in only entered/saved in Hyperion. There are several financial reports for variances that are generated out of Hyperion. So far, this arrangement is serving us pretty well. I second your point that in Hyperion, we can easily compare summary level data. We have Hyperion reports that do variances calculations for sub-totals. In fact, we are also using HP reports for consolidated statements such as Balance sheet, Income statement etc. The actual data for these statements is coming from GL.
As for drill through functionality (from HP to sub-ledger details in financials), we are in process of implementing FDM and use it for both (1) loading data and (2) drill through.
Hope this helps.
ABG

Variance Analysis Help

Dear All
I have created a Scenario to tackle variance analysis and called ActualvsBudget
Example is
Revenue
Actual - Budget = Variance.
The problem I have is that the Favourable or Adverse variance works at accounte level however is distorted when consolidated.
Example
For Revenue
Actual Revenue £20
Budget Revenue £30
Variance = minus £10 (Adverse Variance) Because Revenue was less than expected.
For Costs
Actual Cost £30
Budget Cost £50
Variance = plus £20 (Favourable Variance) - Because Costs are lower than expected.
Gross Margin should Therefor be
Actual (Revenue - Cost) = Minus £10
Budget (Revenue - Cost) = Minus £20
Variance = plus £10 (Favourable Variance) As Gross Margin better than predicted.
So the Gross Margin Variance should be plus £10 as a favourable variance.
However when HFM consolidates it will calculate as follows.
minus 10 (revenue variance) minus +10 the cost variance analysis giving -20 variance on Gross Margin which is correct.
The only way I can see around this is to be able to calculate the parent just for that scenario but it will not let me do that.
Probably because not an input level account.
Can anyone help.

Hi,
Now for the finished good create material cost estimate with quantity structure
Create standard cost estimate (marking and release to be carried out)
now for the same old process order in the cost analysis u can see different value for total target cost
carry out confirmation and u will get the total actual costs based on the activity types u have assigned
-Variance=(difference between total target cost and total actual cost)
Variance related settings are done in consultation with Controlling people.
Regards,
Raj

Web analysis, SQR Production Reporting, and maybe Interact Rpting are dead?

Hi,
I dont wish to hurt anyone but would like to know the facts from experts.
Look Smarter blog says "Web analysis, SQR Production Reporting, and maybe Interactive Reporting are dead?"
http://looksmarter.blogspot.com/search/label/Top10
Is this true?
Thanks,
Shashi

Hi Mehmet,
thank you. I could not answer on friday, was not at office.
I tried according to the instructions of oracle ( http://docs.oracle.com/cd/E17236_01/epm.1112/pr_studio/frameset.htm?data_connection.html ). See comments:
To create an Essbase data source connection:
1. OK
Select Connection on the main SQR Production Reporting Studio screen.
The Create Data Connection wizard is displayed.
2. OK
On the first page, enter a name to identify the data connection.
For example, you could enter Essbase to identify a connection to an Essbase data source.
3. OK
On the second page, select DDO to identify the data source provider.
4. NOT OK. The messages shown: "Unable to start the JVM. Ensure that the JRE section of the SQR.INI file contains the correct directory. (4)"
"Unable to erad DDo Registry.Properties file. Check location and accessibility, an that the sqr.ini DDO pathvariable settings are correct (DDO.3)."
On the third page, select an Essbase data source.
The wizard displays the available registries and data sources.
Seems some setting problems. We would check that. Any suggestions to that error??
Ole

Read Only Access while assigning Analysis Types and Reports in User/Group

Hi Team,
While Assigning Analysis Type,Reports and Workbooks to User "Read" option is not enabled. It is not working and as soon as we select analysis type ,Only one option is editable "Create/Update/Delete". The other two Option is always there as display "Read" and "Execute" . Execute might work with "Scripts template" but "READ" should work for analysis types and Reports.
We are already struggling with "Read Only" Access in security filter as its not working now.
Thanks
Edited by: user7918731 on Mar 2, 2011 11:22 AM

The behavior for Analysis type, workbook and script as follow:-
The Analysis type create/update/delete option will be enabled, read and execute option will be disabled by default.
The report workbook read option will be enabled, and other two options will be disabled.
The script execute option will be enabled, and other two option’s will be disabled.
For providing “Read Only” access in security filter, Switch to the administration tab, Click on Security Filters, Click on Add button, Open Create Security Filter window, Select the access level to Read Only and select user in assigned user , Click on ok.
It should work.

Can i view & analysis the customer report asper the sales area wise how?

can i view & analysis the customer report asper the sales area wise how?

Hi,
If you are talking about FBL3N or any other FI customer subledger report, then Yes and No. If you have customers extended to multiple sales area, then no, if there is a one to one relationship with the sales area then yes.
Cheers.

Can Solution Manager do an analysis of Abap Reports of the customer ??

Good evening !!!
The question is: Can Solution Manager do an analysis of Abap reports of the customer ?? This is, solution manager can give me a report with all the Z reports of the customer with their last date of use, utilization level, etc.... ???
Thanks.
Albert

you can do this through your satellite system with ST03N

Material Variance Analysis

Dear Gurus,
Is there any standard business content for comprehensive material variance analysis by production orders in BW 3.5? I am refering to variances like price variance, quantity variance, resource usage variance etc. by cost element and production order. Currently I am unable to do this in CO since all these variances are clubbed together with activity variances as part of or R/3 setup when the data flows into CO.
Regards
Suneeth Sebastian

You can create a custom query on your material or purchasing cube containing all your variances required. You can use APD functionality to identify the deviations you want to analyse. Please look 0PP_C01 and 0PP_C05 for planned and actual versions...

Variance analysis with InfoSource 2LIS_04_ARBPL - Target fields empty

Hi Experts,
I want to run a variance analysis for production orders in BW.
The Confirmed activites (ISM01-3) are filled in the DataSource 2LIS_04_ARBPL , but all the fields "Target qty/act.typ (ZMNG1-3)" are empty.
Do anyone know, how to these fields are filled?
Thanks.
A. Morhardt

Check the following things:
1. Go to tcode: OPL5 and select the Order type for which you want to load data and Select the Details button.Ensure that the four indicators (Update, Header, Item and Operation) are chosen.
2. Have you filled the Set up table ??
SPRO
Integration with Other mySAP.com Components  Data Transfer to the SAP Business Information Warehouse  Settings for Application-Specific DataSources (PI)  Logistics  Managing Extract Structures  Initialization  Filling in the Setup Table  Application-Specific Setup of Statistical Data  Perform setup u2013 Production  (Choose the activity: Statistical Setup: Shop Floor Information System)
Cheers,
Neel.

Summarized Analysis - Variance Analysis report Problem

Similar Messages

Maybe you are looking for