FDM 9312 Variance Analysis report and columns 1 off in xls

Hi,
I have a variance analysis report in FDM and when i run in HTML and PDF, all the columns are aligned/formatted fine. But when i run it in xls, the columns are one off. Has anyone seen this before or experienced this.
Thanks,
Azmat Bhatti

This is due to formatting within Excel. You can try to adjust the report via the report designer in the workbench. It may not be possible to run the report in Excel with the formatting you are expecting.

Similar Messages

  • Variance Analysis Report

    Hi
    The users wants a Variance analysis report in such a way say there a is variance from target to acutal by cost elements detail of from where that variance come from other than from general variances categories.
    Say for ex: if it is a input quantity variance of 10, they want a report showing from were that variance come from, in more detail. They don't want to go to every order at month end to look and analyse every single PO to see why the variances, is it feasible in SAP?
    Thank you,
    Nivi

    These reports run on summarized values. Please run KKRV for summarization by plant for the given periods.

  • How to read the Variance Analysis report S_ALR_87013139,  Pdt cost by Order

    Hi,
    Could someone tell me how to read the variance analysis report, S_ALR_87013139 - Cumulative for product cost by order. The report has the following fields, Target (Debits),     Actual (Debits),     Scrap,     Var. Without Scrap,     Work in Process(WIP),     Control Costs.
    I am looking to find how the numbers add up.
    Thanks for your help.
    Ram
    Message was edited by:
            Ram R

    Thanks Sridhar,
    When I analyse the report S_ALR_87013139 - Cumulative , for a product for a period (with no scrap), I get the following
    Target (Deb) -   46,855.55
    Act (Deb) - 58,315.87
    Scrap - 0.00
    Var W/O- Scrap -  11,269
    WIP- 0
    Control Cost - 0
    Here Actual - Target is not equal to Variance. What could be the issue?
    Could you please tell me how SAP would update this report  with target & actual costs with respect to open production orders, carried over from previous periods.
    Thanks,
    Ram

  • Each time I try to watch my itunes U podcast and try to skip forward my itunes freezes and gives me an error report and shuts off, this happens also when I try to convert it to my iPod. How can I fix this problem to be able to use the iTunes U?

    Each time I try to watch my iTunes U podcast and try to skip forward my iTunes freezes and gives me an error report and shuts off, this happens also when I try to convert the podcast to my iPod. How can I fix this problem to be able to use iTunes U?

    Hello, bisco,
    This forum is for questions from people who administer iTunes U sites. You'll be most likely to get help with this issue if you ask in the iTunes or iPod forums.
    Regards.

  • UCCX 8.5 - Historical Reports - Traffic Analysis report and Application Performance Analysis report different calls presented

    Hi,
    Please Advice.
    When I compare Traffic Analysis report and Application report, Calls presented are not same. Please Help !
    Also attached herwith the reports

    Mohammed,
    It is common, in many of the Cisco Express 8.5 environments we have looked at, for the Total Incoming Calls given on a Traffic Analysis report to be a higher number than an Application Report.
    The Traffic Analysis Report counts every unique sessionID (unique call) that is inbound (contact type of 1).  The Application Reports do a similar thing but qualify (filter) only the records that have an application assigned.
    There are simply times where inbound calls have been directed to an "agent" without having an applicaiton assigned.
    The best thing the reporting user can do is to run a query on his or her database such as: 
         select * from ContactCallDetail where contactType=1and startDateTime > '2012-11-16 10:00:00' and startDateTime < '2012-11-16 11:00:00';
    Usually when an application is not assigned to the record in the ContactCallDetail table it is because the destination type is equal to 1, which is an 'Agent' instead of a 'route point'.
    So if you modify your select statement to filter by destinationType, you can quickly find the records that don't have the application assigned. 
    Example:  select * from ContactCallDetail where contactType = 1 and destinationType = 1 and startDateTime > '2012-11-16 10:00:00 and startDateTime < 2012-11-16 11:00:00';
    When you look at these records, you will see the agent that took the call from the destinationID field.  The number in that field should match up with the field called 'resourceID' in a table called 'resouce';
         Example:  select * from resource where resouce=6011; where 6011 was the number you found in the destinationID field.
    If there is still confusion about the source of the call - then talk to that agent and find out what is was.
    Good Luck and let me know if you need further help.
    Ron Reif
    [email protected]

  • Migrating HFR and Web Analysis Reports and Documents

    Dear All,
    Is there any way I can migrate HFR and Web Analysis Reports and Documents from test environments to production instead of re-creating reports?
    Thanks,
    ioGGo.

    For HFR reports,
    - If you want to do a bulk export, then choose File->Export & select multiple reports & save to a .zip file when prompted. In this case, reports' folder hierarchy is maintained the same as in source.
    - If you want to do a selective export, select the folder(where your report is present) from the (left)navigation pane. Then choose File->Export, select the report & save to a .des file when prompted.
    For WAS reports,
    you may export each report definition from File -> Export. I believe- it'd let you save as .apt file.
    However, for both type of reports, you need to ensure the respective database connection file(s) are already present before you import the reports/documents in your prod. environment.
    - Natesh

  • Summarized Analysis - Variance Analysis report Problem

    Hi Guru's
    When Executing the Report "S_ALR_87013139 " of Order Variance analysis - Sumarization Report we are not able to fetch any data for the current year.
    But when we are checking for 2008 we are able to fetch some data but with wrong values
    We wanted to know whether any additional configuration has to be done to fetch that data
    Your help will be greatly appreicated
    << Moderator message - Please do not promise points >>
    thanks in advance
    Best Regards,
    Ravi Reddy
    Edited by: Rob Burbank on Dec 15, 2010 5:05 PM

    Hi Christian
    Thanks for your reply i have one more doubt regarding the report " 7-KA2-K-P1" to modify that report does it generate a Workbench Request or a Customizing request.
    I am asking this because as per my Clinets requirement i  need to add few more columns.
    Best Regards,
    Ravi Reddy

  • Sales analysis report and P&L match in SAP b1

    Dear All,
    I am running Sales Analysis report customerwise and item wise where the total of Sales Amount is matching with Revenue amount in profit and loss report for the month April 2011 only.
    But after that these reports are not matchinhg. Please guide in this regard.
    There are some items having valuation method standard, FIFo and moving average.
    Regards
    Aarati Kollur

    Dear Jitin,
    Thanks for quick reply,
    i run the report for item for the April 2011 where total matchs with revenue even there are some service type of A/R Invoices.
    Does sales analysis report consider service type of document in both customer wise and item wise.
    Regards
    Aarati. Kollur

  • Production variance analysis: reports

    Guys hi,
    can anyone tell me what standard reports are available to look at production variance?
    I have seen report 7kok for individual orders, are there other reports
    Do you know of a report that would allow to look at a group of orders
    I use to know of a transaction that takes me to where all these relevant reports, are located
    Thanks in advance for your time
    KR - Loï

    Hi
    Use KKO0 reports..
    Assign Cost Comp Structure in OKN0 and choose Prod Group = Material Group in OKN0
    Transport these settings across to all clients...
    Run KKRV to collect data and then run KKO0 reports
    Br, Ajay M

  • Variance analysis report doesnt have any values

    Hi Gurus,
    For following reports I am not getting any values .Is I am missing any configuration.My client needs to be resolved on top priority.
    S_ALR_87013139 - Target/Actual/Production Varainace - Cumulative
    S_ALR_87013140 - Target/Actual/Production Varainace - Periodic
    S_ALR_87013142 - Target/Actual Comparison - Cumulative
    S_ALR_87013143 - Target/Actual Comparison - Periodic
    S_ALR_87013145 - Plan/Actual Comparison - Cumulative
    S_ALR_87013146 - Plan/Actual Comparison - Periodic
    S_ALR_87013148- Variance Catergories Cumulative
    S_ALR_87013149- Variance Catergories Periodic
    Regards,
    Nitin Amritkar

    These reports run on summarized values. Please run KKRV for summarization by plant for the given periods.

  • Interesting cases about variance analysis report

    hi gurus,
    I have problem like this, in t-code S_ALR_87013127 i can see variance calculation for each order. But, when i run t-code S_ALR_87013140 system told that no record exist. What is the possible reason for this case? It is confusing me. Because both report are standard SAP report, so it's impossible there is error in define report.
    Maximum point will be given for those who help. thanks

    Hi Yudha,
    S_ALR_87013127 reads the same table for orders imputation.
    S_ALR_87013140 reads tables fulfilled by KKRV, KKRC, KKRS (post process)
    Kind regards

  • Selecting Member Name and also Alias in Web Analysis report

    I have made a web analysis report and now i want to show member names as well as alias of the members which i have selected on row side. How can i do that?
    Thanks in advance.

    in the member properties, you have an option to show alias, member name, or both. Click on both / alias as per the requirement

  • Mismatch - Profit and Loss Account and Sales Analysis Report

    There is a mismatch between Sales Analysis Report and Profit and Loss account Sales Figure.
    What will be the reason?

    Hi Nishiraj.......
    then you must update or create new Financial Report template for Profit And Loss Account and then check.
    For creating Financial Report Template please check this.....
    Financial--> Financial Report Template.
    http://help.sap.com/saphelp_sbo88/helpdata/en/45/10c8c90b9941dfe10000000a1553f6/content.htm
    Regards,
    Rahul

  • Adding New Parameters for Account Analysis Report

    My requirement is to customize the Account Analysis report and need to add two parameters(PO Number And Item).In the Dev Instance I have done by creating the customizing package instead of XLA_ACCT_ANALYSIS_RPT_PKG to some xxxx_pkg used in the XLAAARPT.xml file.But when i am doing this in Production the user does not have access to the Packages he has only access for tables and synonyms.I am unable to create the customize package is there any other way to decalre and use parameters in XLAAARPT.xml file.
    If there is any possibility please provide me the solution as soon as possible.
    Thanks in advance

    Hi
    Did you customize the Account Analysis Report? I need to add new columns PO NUmber and Item # . COuld you please let me know how can I get those columns to display in the report? I mean the joins to the tables.

  • Strange figures in Purchase Analysis report

    Hello,
    I am running a purchase analysis report and am a little confused by the results. I am running the reports using goods receipts. What I am finding is that there are a vast amount of zero quantity items shown in the results. When I drill down into the good receipt I can see that there are quantities there but they are not shown in the results. The quantities that are shown are where the goods receipt is open. Where the quantities are zero the goods receipts are closed.
    Is this normal?
    Regards,
    Juan

    Hi Juan,
    This is system behavior. When you select the report to be run on basis on GRPO, it wud display all the GRPO's but when you see a qty as zero in the report, it means that the target document is created for that GRPO. As suggested by Ms. Julie, you would have to make query report to get desired data.
    Thanks,
    Joseph

Maybe you are looking for