Sun IDM Scheduler not getting Triggered
Hi All,
I created an scheduler for System Log Mainteneance Task which is the Task provided by SIM by default.
But it is not getting invoked itself.
I enabled the Tracing for scheduler but nothing is being logged so it is not getting trigeered itself.
Please help me in this issue
Thanks
Hi Balu,
I enabled tracing on com.waveset.task.The scheduler is enabled in WSproperties file.
It is not showing any error in the logs or it is not showing that the specific scheduler has started.
the logs are as below:
20110620 10:33:58.117 pool-1-thread-8(0x01c20c74) Scheduler#serverConfigurationChanged() Entry no args
20110620 10:33:58.119 pool-1-thread-8(0x01c20c74) Scheduler#serverConfigurationChanged() Data ready cycle= 5
20110620 10:33:58.119 pool-1-thread-8(0x01c20c74) Scheduler#serverConfigurationChanged() Data scheduled cycle= 60
20110620 10:33:58.119 pool-1-thread-8(0x01c20c74) Scheduler#serverConfigurationChanged() Data finished cycle= 3,600
20110620 10:33:58.119 pool-1-thread-8(0x01c20c74) Scheduler#serverConfigurationChanged() Data miss threshold== 300,000
20110620 10:33:58.120 pool-1-thread-8(0x01c20c74) Scheduler#serverConfigurationChanged() Info Changed task restrictions
20110620 10:33:58.120 pool-1-thread-8(0x01c20c74) Scheduler#serverConfigurationChanged() Data exclusion= true
20110620 10:33:58.120 pool-1-thread-8(0x01c20c74) Scheduler#serverConfigurationChanged() Data restricted set= null
20110620 10:33:58.120 pool-1-thread-8(0x01c20c74) Scheduler#serverConfigurationChanged() Exit void
20110620 10:33:58.126 Task Scheduler(0x018b429b) Scheduler#run() Entry no args
20110620 10:33:58.169 Task Scheduler(0x018b429b) ServerRegistry#activate() Entry lh=com.waveset.server.InternalSession@5cd7f9, serverName=xxxxxxxxx
20110620 10:33:58.169 Task Scheduler(0x018b429b) ServerRegistry#setServerState() Entry lh=com.waveset.server.InternalSession@5cd7f9, serverName=xxxxxxxxx
20110620 10:33:58.220 Task Scheduler(0x018b429b) Scheduler#cleanupExecutingTaskDefinitions() Entry no args
20110620 10:33:58.261 Task Scheduler(0x018b429b) Scheduler#cleanupExecutingTaskDefinitions() Exit void
20110620 10:33:58.261 Task Scheduler(0x018b429b) Scheduler#cleanupOldTaskDefinitions() Entry no args
20110620 10:33:58.265 Task Scheduler(0x018b429b) Scheduler#cleanupOrphanTaskResults() Entry no args
20110620 10:33:58.476 Task Scheduler(0x018b429b) Scheduler#cleanupOrphanTaskResults() Exit void
20110620 10:33:59.584 Task Scheduler(0x018b429b) Scheduler#recordHeartBeat() Entry force=false
20110620 10:33:59.584 Task Scheduler(0x018b429b) Scheduler#recordHeartBeat() Data currentTime= 1,308,546,239,584
20110620 10:33:59.584 Task Scheduler(0x018b429b) Scheduler#recordHeartBeat() Data secondsSinceLastHeartBeat= 1,308,546,239
20110620 10:33:59.584 Task Scheduler(0x018b429b) ServerRegistry#getHeartBeatIntervalSeconds() Entry lh=com.waveset.server.InternalSession@5cd7f9
20110620 10:33:59.584 Task Scheduler(0x018b429b) ServerRegistry#getHeartBeatIntervalSeconds() Exit returned= 60
20110620 10:33:59.584 Task Scheduler(0x018b429b) Scheduler#recordHeartBeat() Data heartBeatIntervalSeconds= 60
20110620 10:33:59.584 Task Scheduler(0x018b429b) Scheduler#recordHeartBeat() Info recording heartbeat for xxxxxxxx
Thanks
Similar Messages
-
Search Incremental Crawl is not getting triggered at the scheduled time.
Hello All,
Since 1 week i am observing that the incremental crawl is not getting triggered on the scheduled day & time but the next schedule is moving to next day. Let me put down in a detail.
Content Incremental crawl is scheduled to run daily at 5.00 PM CST. Last 3 days i checked at 5.30 PM CST and found that the incremental crawl is not triggered and the status is Idle. But i noticed that the Next incremental crawl date is moved to next day
at the same time.
Can some one help me out how to get out of this issue. Thank You!Hi,
Did you check the crawl logs? Please post here any error message that you come across in Crawl logs.
Also, does crawl operations are performed when you crawl manually?If yes, have a look at steps below:
Possible Cause:
Folder %WinDir%\Tasks is not added with SharePoint Local group WSS_WPG Where Indexer is Running
Resulution:
1. Login to the SharePoint Indexer machine with account which has Administrative previlages
2. Open Command prompt and run the command attrib –s %windir%\tasks.
%Windir% is the Default installation of Windows
3. Open Windows Explorer and go to the %Windir%\Tasks folder And open the properties of the Tasks folder
4. Click the Security tab and Check whether we have WSS_WPG, If it is not there Add the Group with Full Read and Write permissions
5. Now Open IIS Manager and restrat IIS or at the command prompt Type IISRESET so that the Chages will take place.
6. From the command prompt Run the command attrib +s %windir%\tasks so that the view goes back to default
7. Do the above Steps on all the SharePoint servers in the Farm
Ref: http://blogs.msdn.com/b/vrajas/archive/2012/02/08/moss-2007-schedule-crawls-are-not-starting-automatically.aspx
Hope it helps!
Thanks,
Avni Bhatt
If this helped you resolve your issue, please mark it Answered -
Alert is not getting triggered in QA
Hai Experts!
i have transported the Alert Classification and Alert Category from development system to Quality system and i created the alert rule in QA. Now alerts mails are not tiggering. In se30 i have excecuted the RSALERTTEST that time i am getting a mail in the alert inbox and also to my mail box but for a real time data alert is not getting triggered.
Pls help me to solve this issue.
Regard's
PreethiHi
Schedule send job
please see as
help.sap says
Send Job
E-mails sent from an SAP application are first stored in a queue. A periodical background process, the SAPconnect send job, gets the e-mails from this queue and sends them over the Internet. To schedule this job in SAPconnect: Administration, proceed as follows:
i. Choose View ® Jobs.
ii. If no other job has been scheduled, choose Job ® Create.
iii. Enter a job name and confirm it.
iv. Select the variant SAP&CONNECTALL by positioning the cursor on it.
v. Choose Schedule Job.
vi. Choose Schedule periodically.
vii. Select the interval you require, such as 10 minutes.
viii. Choose Create.
Refer this.
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm -
Alerts not getting triggered from Adapter Framework
Hi,
I have done the following steps for the Alerting:-
1. In configuration of RWB, activated monitoring for XI integration server & XIAdapterFramework and set the monitoring level to 'HIGH'.
2. Scheduled the Report 'SXMSALERT_PROCESS_DATA_GET' on ABAP stack.
3. In the 'further settings' link in End-to-End monitoring, activated the monitoring and set the frequency.
4.Created an alert category using t-code 'ALRTCATDEF' and assigned fixed users(myself) to it.
5.Defined an alert rule with '*' in all conditions and 'No restrictions' for the question 'Where did the error occur'.
Finally after all the steps:-
I am able to receive the alerts in the inbox -
a) by running the test report 'RSALERTTEST'
b) from a control step in BPM.
<b>However, alerts are not getting triggered for an error in the Adapter Framework. (an exception in the Adapter Channel)</b>
When i debugged the SXMSALERT_PROCESS_DATA_GET report, there was step where it was looking for process instances in table 'SSPICSPRHD' which was empty and the alert error log said -
<i> No process instances found for process type ID: 26460B43EB934C4C9ABBE9627380A89E ( XIDomain: domain.00.hqdvsapxi01 )</i>
Any help/hint is welcome !!!
Thanks & Regards,
Renjith.Hi,
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1382. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I think this blog will be of help to you..
Cheers,
Divya -
Enable User task is not getting triggered
Hi All
We have a provisioning workflow configured. "Enable User" task is not getting triggered while the user is enabled in OIM. Can anyone give a clue as to how to get it triggerd? Rest all the tasks are fine (Create, Disable, Delete, and other custom tasks)
Thanks,
VinayThere is a OOTB scheduled Task "Enable After Start Date". once the user get enabled in OIM user profile. You have to run this task manually to have effect on corresponding RO for enablement. Else it will execute automatically as per scheduled time.
if the version of OIM is 11.1.1.5. There is an issue. update patch BP02. for same
--nayan -
Hi All,
I Have encountered an Issue with JOB not getting Triggered in BI system .
For Datasource 2LIS_04_P_ARBPL , I have created Infopackage , when I am going to schedule tab and running an Infopackage. Job is not getting trigger . And it is going on Hold for a longer period.
Data is in the source system and I am unable to fetch data from source system .
One more thing there was some upgration activity happened in the source system one day before.
Could u please let us know , Is the reason behind could be upgration in source system ?
Please let me know what needs to be crosschecked and what could be the solution for this Issue.
Looking for response .....
Regards,
MaheshHi ,
In the Source system Data is fetching I mean through RSA3.
Even I able to replicate the Datasource as well.
Also in T-code : SM59 , when I am checking Source system Connection check , it is not poping any error.
But When I am Checking through RSA1 - > Source System
Source system connection by clicking CHECK Option then it is poping an error "Check Failed for RFC Connection ; Check Destination ".
Also In Source system T-code :SM50 I can see three BGD WP which are in waiting status.
In T-code : BD87 I have checked I didnt find any IDOC's in Yellow colour .
How do we need to check whether ALEREMOTE is active or not?
Actually my Issue is Jobs are not getting trigger in BI . So what all things needs to be taken care apart from this.
So Is there any thing to be taken care from Basis team for Restarting of BI Jobs after any kind of Upgration activity in general?
Regards,
Mahesh -
Output type maintained but not getting triggered
I have created a Z output type for scheduling agreement(application EV) which triggers an idoc and maintained it in NACE but it is not getting triggered automatically with the conditions.Is there any more settings that has to be done??
Edited by: nevinphilip on May 17, 2010 10:35 AMDear,
Maintain condition record to your combination in t.code MN07
Regards,
Gopala.S -
/BDL/TASK_PROCESSOR not getting triggered in satellite system from Solman
Hi,
We have scheduled EWA report in Solution Manager for one of the satellite system.
Solution Manager has sudddenly stopped creating of job /BDL/TASK_PROCESSOR0000002218 (ie job which is created immediately as EWA is scheduled in Solution Manager)
/BDL/TASK_PROCESSOR is running correctly and on hourly basis in satellite.
The EWA report is getting generated in Solution Manager after long time and without job /BDL/TASK_PROCESSOR0000002218 (is sessin specific job) being triggered.
Kindly help.
Regards,
Trupti MHi Paul,
My problem is solved.
Actually the Task: EarlyWatch Alert for Solution Manager under 'To Do' view of sdccn of satellite system was somehow getting scheduled as Back dated(ie instead of 30.04.2020 it was getting scheduled at 28.04.2010)
Due to this when we would do 'Start now' for the Task 'EarlyWatch Alert for Solution Manage' it was not getting triggered.
So I manually did refresh session which was mentioned under steps for manully sending data to SolMan under solution_mamanger tcode.
Due to this job BDL/TASK_PROCESSOR0000002237 got created.After this job got completed Task ''EarlyWatch Alert for Solution Manager ' got automatically generated.
I back dated the date for Task ''EarlyWatch Alert for Solution Manager" and started it.
Due to this the job /BDL/TASK_PROCESSOR0000002238 got created in satellite system for sending data to SolMan (This was not happening earlier.)
Extract from Solution_Manager tcode when scheduling:
When the Session Refresh task has been processed, a new task with the appropriate session type and session number appears in the To do view. This task collects and sends the data for your session. If a new task does not appear, search in the task-specific log for errors that ocurred during the Session Refresh task and make any necessary corrections.
To start the task immediately, select it and right-click to call up the context menu.
Choose Start Now. When the task has been processed successfully, it appears in the Done view. The data has been sent to your SAP Solution Manager system. You can check this in the task-specific log.
Thanks for all your help. Hoping my post will also be helpful for others.
Regards,
Trupti M -
User-exit not getting triggered in VA32
Hello Experts,
Iu2019ve a requirement and Iu2019m working on Change Scheduling Agreement u2018t-code VA32u2019. According to requirement I need to capture all header data and data in Sales, Item Overview, Item Detail and Ordering party tabs. Iu2019ve set the break points in almost all the user-exits but only one FM (EXIT_SAPLV45L_002) of exit u2018V45L0001u2019 is getting trigger. Even though other exits/FM has all the tables as import/export parameters which I need but they are not getting triggered. Can anybody please tell me which user-exit / BADI I should use to capture the required data?
Thanks.Hello Experts,
Thanks a lot Vijay for you reply. Iu2019ve seen user exits of MV45AFZZ include and looks like USEREXIT_SAVE_DOCUMENT_PREPARE is the correct user exit. But I havenu2019t use Includes before can you or anybody else please tell me how to write code in include. I know how to search an include in a program but not sure how to add code in the user exit.
Thanks -
Outbound IDOC not getting triggered while new master data is created
Hi Experts,
I am trying to trigger an outbound idoc for Cost Center master data when ever cost center is being created or cost center is being changed. (Usinf COSMAS)
I have successfully made use of change pointers and now able to trigger the idoc when ever Cost Center is getting changed. But while creating new Cost center, IDOC is not getting triggered.
I used the function module MASTERIDOC_CREATE_SMD_COSMAS for triggering the idoc.
Could one of you please let me what would have gone wrong? Since IDOC is getting triggered while changing the master data but not getting triggered while creating new master data.
Thanks in Advance,
VinothHello,
when you activate BD21 for a message type, it creates a entry in the SAP tables. that these Cost Centers have been sent already and any susequent changes to this will trigger a IDoc.
As for BD16, scheduling it wont help as, you need to specify the selection criteria, and i do not see how you will be able to dynamically get the selection criteria.
Try BD95, and BD59 to create a change pointer for a field, so when ever this fields is modified (new/updated) an idoc will be triggered.
regards,
Abhishek -
Password Reset Hook Task is not getting triggered
Hi,
We have setup the task to reset the password of the user in IDM 7.2. It successfully modify the password for the user in Identity Store. Attribute MX_PASSWORD and MX_ENCRYPTED_PASSWORD are getiing updated when password was reset. This I verified in the databse level.
Though we have setup up HOOK8_TASK for few repository still it's not getting triggered and password reset is not done in backend systems.
Repository parameter settings are as below:
The user for which password is getting reset is already linked to attribute ACCOUNT<Repository Name>.
Still when I checked the job log I could not see that job 1002597 has been executed for the repository.Hi Christopher,
Password provisioning is already enabled in Identity Store.
Repository is already have provisioning / deprovisioning even task.
Is there any other setup I need to make?
Thanks,
Pravansu -
Print program is not getting triggered when saving the application
Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
UmeshHi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar -
User command is not getting triggered in interactive ALV with LIST display
Hi experts,
I have developed an interactive ALV report with LIST display. Here, the issue is, when i double click a record in the primary ALV list, the control must go to the USER COMMAND event which i have written in my report. But the user command event is not getting triggered at all when i double click any record.
It gives the following information instead.
"Choose a valid function".
(My user command name and its respective form name are same.)
Here is my code..
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'TST1'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
FORM tst1 USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.
* When a record is selected
WHEN '&IC1'.
* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex. IF sy-subrc = 0.
* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.
* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'Z_DEMO_PDF_JG'
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
Please advice what is the msitake i have done here..Read the following code:
pass the i_callback_user_command = g_user_command to the ALV function module and write the FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
as shown below.
thanx
Data for ALV display
DATA : gt_fieldcat TYPE slis_t_fieldcat_alv,
gt_events TYPE slis_t_event,
g_variant LIKE disvariant,
g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
g_status TYPE slis_formname VALUE 'SET_PF_STATUS',
gt_list_top_of_page TYPE slis_t_listheader,
g_repid LIKE sy-repid,
gf_pos TYPE i
Data for ALV display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_repid
i_callback_program = sy-repid
it_fieldcat = gt_fieldcat[]
it_events = gt_events[]
i_callback_user_command = g_user_command
i_save = 'A'
is_variant = g_variant
TABLES
t_outtab = it_print.
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
CASE ucomm.
WHEN '&IC1'.
CASE selfield-sel_tab_field.
WHEN '1-KUNNR'.
READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
IF sy-subrc = 0.
SET PARAMETER ID 'BPA' FIELD wa_print-kunnr.
CALL TRANSACTION 'BP'.
ENDIF.
WHEN '1-MATNR'.
READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
IF sy-subrc = 0.
SET PARAMETER ID 'JP_ISS' FIELD wa_print-matnr.
CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN..
GET PARAMETER ID 'WRK' FIELD wa_zprint-werks.
SET PARAMETER ID 'VKO' FIELD wa_zprint-vkorg.
SET PARAMETER ID 'VTW' FIELD wa_zprint-vtweg.
CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN.
ENDIF.
Endcase.
Endform. -
Output fax not getting triggered when sales order credit block is released
Hi Experts,
I am working on an issue.
I have one sales Order which has credit block.
when we release the credit block via vkm3, then the output fax gets triggered.
I have another sales order which has credit block,
when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
Any advice on this please.
Regs,
SuryaD.
Edited by: SuryaD on Oct 21, 2010 9:34 PMHi Brad,
Thanks for your response.
Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
I went to Go to -Determine analysis for both orders 1 and order 2.
in both the analysis i am able to see the output ZFAX.
*Analysis Output*
*Order 1 Order 2*
1. ZFAX 1. ZFAX
10(Z010) 10(Z010)
0000122426 0000122427
2. ZFAX 2. ZFAX
When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
There in just 2 differences as below.
In the above screen,
1.Order 1 ==> has some value 0000122426
2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
Diagnosis
Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
In the above screen
1.Order 2 ==> has some value 0000122427
2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
No more information is available.
Please guide as to how to initiate the debug for output processing ?
Which screen where to switch on debugger.
where to look further?
Regards,
SuryaD.
Edited by: SuryaD on Oct 22, 2010 11:41 AM -
Driver program is not getting triggered
Hi Experts ,
I have assigned driver program and form under the application ME to the output type WE01 and WE02 and WE03 .But my program is not getting triggered.
How to check whether the Form entry is getting or not ?
i have also tried putting the break point in the program.
Please suggest .
ThanksHi Kartik,
Thanks a lot !
Update for you ......
By refereing std prog i have written the form routine like below.
FORM entry USING ent_retco ent_screen.
xscreen = ent_screen.
CLEAR ent_retco.
PERFORM check_input USING nast-objky.
ent_retco = retco.
perform fetch_data.
perform print_control.
ENDFORM.
form check_input using objky.
nast_key = objky.
select single werks from t001w into t001w-werks where werks = NAST_KEY-p_werks.
if sy-subrc ne 0.
message 'ENTER VALID PLANT' type 'E'.
endif.
endform. "check_input
But i am not able to debug the code...
Break point is not triggering the code.
Maybe you are looking for
-
Itunes doesn't play songs, help me please
hi guys, i'm an italian boy. my itunes doesn't play any songs that i have; when i click on one song the little blue loudspeaker appears but the song doesn't start. this problem began to exist when i downloaded the latest version of itunes (6.0.5, i t
-
Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all? I updated itunes and everything
-
Oracle Alert - ORA-1652 Unable to extend the Temp Segment
Hi Team, During our DB Reorg we have received the Oracle Alert - ORA-1652 Unable to extend the Temp Segment by 15485 in tablespace :PSAPBTABI. Our DBReorg got cancelled.. We would like to know how we can resolve the above error so that we can resched
-
Hi, I would like to create one matrix with 2 headers. Its similar to system forms for example store items where on pane Stock is in matrix disponibilty for each stores and bellow is sum for all stores. I read somewhere thats this are 2 matrixes - fir
-
Need asnwers - interview questions
Hi Experts, I am a novice candidate pursuing for SAP BW/BI opportunities and appearing for different interviews in SAP BW/BI. Following are some of the questions that I was fired by the interviewers. I appreciate your time and consideration for answe