/BDL/TASK_PROCESSOR not getting triggered in satellite system from Solman

Hi,
We have scheduled EWA report in Solution Manager for one of the satellite system.
Solution Manager has sudddenly stopped creating of job /BDL/TASK_PROCESSOR0000002218 (ie job which is created immediately as EWA is scheduled in Solution Manager)
/BDL/TASK_PROCESSOR is running correctly and on hourly basis in satellite.
The EWA report is getting generated in Solution Manager after long time and without job /BDL/TASK_PROCESSOR0000002218 (is sessin specific job) being triggered.
Kindly help.
Regards,
Trupti M

Hi Paul,
My problem is solved.
Actually the Task: EarlyWatch Alert for Solution Manager under 'To Do' view of sdccn of satellite system was somehow getting scheduled as Back dated(ie instead of 30.04.2020 it was getting scheduled at 28.04.2010)
Due to this when we would do 'Start now' for the Task 'EarlyWatch Alert for Solution Manage' it was not getting triggered.
So I manually did refresh session which was mentioned under steps for manully sending data to SolMan under solution_mamanger tcode.
Due to this job BDL/TASK_PROCESSOR0000002237  got created.After this  job got completed Task ''EarlyWatch Alert for Solution Manager ' got automatically generated.
I back dated the date for Task ''EarlyWatch Alert for Solution Manager"  and started it.
Due to this the job /BDL/TASK_PROCESSOR0000002238  got created  in satellite system for sending data to SolMan (This was not happening earlier.)
Extract from Solution_Manager tcode when scheduling:
When the Session Refresh task has been processed, a new task with the appropriate session type and session number appears in the To do view. This task collects and sends the data for your session. If a new task does not appear, search in the task-specific log for errors that ocurred during the Session Refresh task and make any necessary corrections.
To start the task immediately, select it and right-click to call up the context menu.
Choose Start Now. When the task has been processed successfully, it appears in the Done view. The data has been sent to your SAP Solution Manager system. You can check this in the task-specific log.
Thanks for all your help. Hoping my post will also be helpful for others.
Regards,
Trupti M

Similar Messages

  • Stock value is not getting updated in APO system From ECC automatically

    Hi All,
    Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
    for this we are using EXIT_SAPLCSTK_001.
    I am using VL10A for delivery and VL06G for PGI
    I have also checked integration model for material and stock.
    Please help me out as it is very urgent.
    Thanks,
    Gaurav Mittal
    Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

    Hi,
    for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
    please check the same.
    if this does not help, let me know in detail the steps which you are following..
    Ram

  • To view the list of users in Satellite Systems from Solman

    Dear Friends,
    We wish to view the list of users in a satellite system (say ECC5.0) from solution manager 4.0, can anyone help us to find the same.
    Regards
    Senthil

    Hello Senthil,
    You mean the list of BP associated to the satellite users already created? If this is the case
    in DSWP, choose a Solution that has your satellite as system and go to Edit->BP
    Add the satellite system to the list and if I don´t remember wrong you will get the
    BP for the satellite users already created in the righ chart.
    Sory if I don´t get the correct question?
    Best regards,
    Dolores

  • Job are not getting Triggered

    Hi All,
    I Have encountered an Issue with JOB not getting Triggered in BI system .
    For Datasource 2LIS_04_P_ARBPL , I have created Infopackage , when I am going to schedule tab and running an Infopackage. Job is not getting trigger  . And it is going on Hold for a longer period.
    Data is in the source system and  I am unable to fetch data from source system .
    One more thing there was some upgration activity happened in the source system one day before.
    Could u please let us know , Is the reason behind could be upgration in source system  ?
    Please let me know what needs to be crosschecked and what could be the solution for this Issue.
    Looking for response .....
    Regards,
    Mahesh

    Hi ,
    In the Source system Data is fetching I mean through RSA3.
    Even I able to replicate the Datasource as well.
    Also in T-code : SM59 , when I am checking Source system Connection check , it is not poping any error.
    But When I am Checking through RSA1 - > Source System
    Source system connection by clicking CHECK Option  then it is poping an error "Check Failed for RFC Connection ; Check Destination ".
    Also In Source system T-code :SM50 I can see three BGD WP which are in waiting status.
    In T-code : BD87 I have checked I didnt find any IDOC's in Yellow colour .
    How do we need to check whether ALEREMOTE is active or not?
    Actually my Issue is Jobs are not getting trigger in BI . So what all things needs to be taken care apart from this.
    So Is there any thing to be taken care from Basis team for Restarting of BI Jobs after any kind of Upgration activity in general?
    Regards,
    Mahesh

  • Alert is not getting triggered in QA

    Hai Experts!
    i have transported the Alert Classification and Alert Category from development system to Quality system and i created the alert rule in QA. Now alerts mails are not tiggering. In se30 i have excecuted the RSALERTTEST that time i am getting a mail in the alert inbox and also to my mail box but for a real time data alert is not getting triggered.
    Pls help me to solve this issue.
    Regard's
    Preethi

    Hi
    Schedule send job
    please see as
    help.sap says
    Send Job
    E-mails sent from an SAP application are first stored in a queue. A periodical background process, the SAPconnect send job, gets the e-mails from this queue and sends them over the Internet. To schedule this job in SAPconnect: Administration, proceed as follows:
    i.         Choose View ® Jobs.
    ii.       If no other job has been scheduled, choose Job ® Create.
    iii.      Enter a job name and confirm it.
    iv.      Select the variant SAP&CONNECTALL by positioning the cursor on it.
    v.        Choose Schedule Job.
    vi.      Choose Schedule periodically.
    vii.     Select the interval you require, such as 10 minutes.
    viii.   Choose Create.
    Refer this.
    http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm

  • Urgent IDOC -  EXIT_SAPLLMDE_002 not getting triggered.

    I am doing an inbound idoc on message type WMMXY goods movement.
    The idoc is sucessfully getting posted when tested through we19.
    But the user exit  EXIT_SAPLLMDE_002  where i am doing an enhancement is not getting triggered when the idoc is posted.
    I have activated the exit functional module, the project in CMOD is also activated.
    Some one pls help me .. if u have its document pls post it to me.

    Hi,
    Please refer to this documentation of user-exit; may be of some help for you.
    You can use this user exit to influence the processing of IDOCs of the
    message type WMMBXY (goods movements) that are sent to SAP from external
    systems via the MM-MOB or WM-LSR interfaces. You can also access
    customer-specific processing in this case.
    Call transaction and other important requirements
    The user exit is performed in the function module that processes the
    IDOCs of the message type WMMBXY, after the IDOC is withdrawn and
    checked but before direct processing in the application has been
    initiated. (That is, the data for the goods movement has already been
    determined and edited, but the function module for updating this has not
    yet been accessed. The standard function module for processing the
    message type WMMBXY is called L_IDOC_INPUT_WMMBXY. The IDOC is processed
    in an update task, which means that the source code is also executed in
    the update.
    If an error arises, then messages should not be issued since processing
    is being carried out in the background and the result of processing must
    always be returned to the ALE interface. For this reason language
    elements such as MESSAGE, COMMIT WORK, LEAVE and the like should not be
    used. If errors that should be passed on to the ALE interface or that
    affect the result of processing are found in the user exit, you should
    also use the user exit MWMIDI07(EXIT_SAPLLMDE_001) since it alone can be
    used to take your errors into account (see documentation of the user
    exit).
    Parameters and options
    The user exit in the program is the function module EXIT_SAPLLMDE_002.
    In order to be able to use it, you must first create Include zxlidu10
    and activate the enhancement by means of transaction CMOD. As
    parameters, you can use the following data:
    o   Goods movement data already determined from the received IDOC:
        -   Transaction code that is given along with the application
            function module (see interface description (import parameter
            X_TCODE).
        -   Indicator: post only if all items o.k. (import parameter X_XALLP
            ). This indicator must be set by default, to enable IDOC error
            processing.
        -   Indicator: Reset all tables (as primary call) (import parameter
            X_XALLR). This indicator is not set by default to enable the
            processing of several IDOCs. Normally you will not change these
            two indicators.
            -   Goods movement items table (table parameter T_IMSEG)
        o   Received IDOC data:
            -   IDOC control record (import parameter I_IDOC_CONTROL)
            -   IDOC data records (table parameter T_IDOC_DATA)
        This user exit can be used to:
        o   Influence the determined data for the goods movements. All data can
            be changed in this case.
        o   Analyze and process data that is transferred using customer-specific
            segments.
        o   Access additional activities.
        Examples
        A number of potential applications are described below.
    A number of potential applications are described below.
    o   You want to inform a user by mail when the goods movements of
         certain vendors or customers take place.
    o   You want to start your own label printout, for example at goods
         receipt.
    o   You want to update your own tables, for example statistical data.
    o   You want to analyze a missing parts table at goods receipt and
         redirect the goods receipt correspondingly.
    Reward points if helpful.
    Regards,
    Pankaj Sharma

  • Release strategy not getting triggered.

    Hello,
    As per the client request, new Purchase group had to be added to the existing release strategy.
    I had added the purchase group in the edit characteristics and in the release strategies: classification.
    But now the the release strategy is not getting triggerred.
    In CL20n I see that the, status is marked 3 i.e incomplete. The reason to this is not known as customizing done is correct.
    In OMGSCK i see that no errors are found with the release strategy.
    Please suggest.
    Regards,
    Neetha

    hi,
    Sometimes the strategies are taken after restarting the sap system...there has been one same situation before also..at that time the same strategy started working after restarting the sap system...
    pls check it may be the same issue with you also..
    Regards
    Priyanka.P

  • Treasury workflow  not getting triggered .

    I have done all as given in the SAP doc ...
    The release procedure for the business partner has been set up using a Business Workflow, for
    which SAP has defined the standard role 20000053 'TRLOAPPROVAL' and the Workflow
    template WS20000263 'WSTRLOAPPROV'.
    Procedure
    In order to use the release workflow for the business partner, you are also required to make
    settings in Customizing for the Basic Functions area in Treasury in the following IMG activities:
      By choosing u2019Activate Releaseu2019, you can activate the release for the business partner.
      By choosing u2018Maintain and Activate Release Parametersu2019, you can specify the number of
    release steps you require for each role category.
      By choosing 'Adjust/Copy Workflow Template', make the following settings:
      By choosing 'Define Standard Roleu2019, you create the responsibilities for the standard roles
    delivered with the system, to which you assign users, positions, organizational units,
    work centers, jobs, or people. Using the settings you make here, the system determines
    the Responsible Agent [Ext.] during the workflow run.
      By choosing 'Adjust Workflow Template', you then have to activate the event linkage.
    but its not getting triggered ..  the event which is gettting triggered is not the  one whcih is used in the workflow
    Thanks for help .
    Naval Bhatt

    Naval,
    Either you can check SAP notes for the same or you can customize the workflow. If the event being triggered is different then copy the workflow and change the workflow start condition.

  • OIM 11gR2 Approval workflow not getting triggered

    I created an approval workflow by following the 11gR2 developer's guide and deployed it. then created an app instance and also an approval policy for operational level which is auto approved and for request level with this composite. when i raise a request for this app instance in the catalog the SOA composite is not getting triggered. I am able to see a task in pending approval of system admin whenever i raise request for any user and if i complete that pending approval the app gets provisioned directly. Also i do not see any request ID also. please help to find out whats going wrong

    Now i tried raising a request from another user who is not a member of SYSADMIN role. This time the request id is generated and a task 'Manual Task for Provision operation for Beneficiary X' is generated in pending approvals of xelsysadm user. When completed the app instance gets provisioned. So this means operational level approval task is triggered? and it has auto-provisioning?
    why my custom approval workflow is not getting triggered?
    I have created 2 approval policies, one for request level which is auto approval and other for operational level where i have selected the deployed composite name.In both the approval policies i have selected the request type as Provision ApplicationInstance. There is no error also while deploying the composite. Am i missing any step? please help.
    Edited by: 955932 on Jan 10, 2013 10:19 PM

  • Release procedure with classification not getting triggered

    Hi,
    I have configured the new release procedure for the PR release of type with classification, but its not getting triggered. Earlier my SAP system had without classification in place, but I wanted to have with classification. Can any one suggest how do I switch between two.
    Ideally once I create the release group in with classification procedure that procedure gets activated and gets triggered. Unfortunately its not happening in my case. I tried deleting the entries from the without classification side too, but still it doesnt respond. Is there in patch or note missing.
    Your suggestion would be highly appreciated.
    sachin

    Hi Jurgen,
    I am configuring it for PR and with classification method. Well for simplification I am using just purchase group as characteristics, but still its not working. Earlier system had without classification in place, as its there in a default system and used to get triggered. When I created new procedure its not getting triggered. To be assured I deleted the data from witout classification, but still its not working.
    Where as I did the same setting for PO, its working and giving me correct releaes strategy.
    My characteristic is PRGRP using the communication structure CEBAN and field as EKGRP
    Please suggest me on this.
    sahcin
    Edited by: sachin sagane on May 18, 2010 6:32 PM

  • For the new delivery type created the Idoc is not getting triggered

    Hi All,
    I am facing the following problem:
    For every outbound delivery getting created we have an Idoc which creates the file(sending the outbound delivery details), this file is sent to a system where the picking & packing of the goods happen. This process seems to be working fine for all the existing delivery types, but now we created a new delivery type for which the Idoc is not getting triggered.
    Would like to understand what setting are we missing because of which the Idoc is not getting created for the new delivery type.
    The Idoc being used is:   DESADV01
    Message type :DESADV
    Thanks,
    Geeta

    I believe your existing idocs are created through a output type on the delivery ? if yes, probably you need to configure an existing output type / create a new output type for your new delivery type...

  • Enable Task not getting triggered

    Hi experts
    In my Process Definition, I have a task say Task1 which has task effect as "Enable User or Access to Application" and say Task2 has task effect as "Disable User or Access to Application".
    Here when I click on enable checkbox under Resource Profile, my task Task1 gets executed and enables the Application. The same will happens for Disable under same resource profile.
    Also when I Disable the user at user profile level, the task Task2 gets executed and sets the RO status as Disabled. But my problem is that when I click on Enable at user profile level, the RO which is already disabled is not getting enabled. I can see Task1 task is not getting triggered.
    Any early responses are appreciated.
    Thanks in Advance

    Look at the following System Configuration property:
    XL.EnableDisabledResources
    This should be set to TRUE. I think your environment must be showing it as the other way.
    If that is not the case then are you sure that your user is getting Enabled with that action. Let us know, although I think that this should not occur.
    Thanks
    Sunny

  • Issue in Production for Workflow not getting Triggered .

    Hi Guys,
    I have a workflow, which is properly triggering in the development and Quality but not getting triggered in the Production. Can't get the Exaact reason because by using T-code PFTC when i test the workflow independantly its working properly and even BOR does not have any problem. Please Help me guys as this is a issue in Production.
    The workflow is a customized one, It getting triggered throught the funtion call in User Exit of MM01.
    Thanks

    It getting triggered throught the funtion call in User Exit of MM01.
    1. I hope the workflow customization is done properly in production system, as you stated that if you are trying to trigger from PFTC then it is working fine, can you please try to Refresh Organizational Environment  from SBWP ---> On MEnu  ---> Settings  --> Workflow Settings  ---> Refresh Organizational Environment and  secondly try to refresh the buffer from txn SWU_OBUF
    2. Make sure the user exit is transported to Production.
    3. Check the workflow log from the txn SWIA  if you have proper authorizations for the userid.

  • RSR_OLAP_BADI for virtual characteristics not getting triggered!!!

    I am facing a strange problem and am a little pressed for time to solve the same. Any help/guidance related to this will be highly appreciated.
    I am working on BI 7.0. I have two implementations of the BADI RSR_OLAP_BADI for virtual characteristics,
    (1) say A, that we implemented as a proof of concept with filter as multiprovider M1
    (2) say B, that in implemented with filter as multiprovider M2
    Both were working fine and I was able to put breakpoints inside the code and debug whenever required. I had used it till last week and everything was fine.
    Today, I had to change implementation B due to a new requirement. So a new characteristic was added to M2 and the code in B was extended at appropriate places to fill this new virtual characteristic also. However, even though the change was successfully activated and the BADI looked fine, it was not triggered when the query was executed. I checked with another query on M2 which was the query for which the implementation was initially made. For that also the BADI is not getting triggered. I put break points in the define, initialize and compute methods but none are hit during the query execution!
    I further ran the queries on M1, which shud have called the implementation A. Then also the BADI is not getting triggered. Please note that implementation A, multiprovider M1 or the queries on it were not changed at all.
    I really need to fix this issue at the earliest. What am I missing? Why are the BADIs not getting triggered eventhough the implementations are active, the BADIs are error free and the filters are correctly defined?
    Are there any global settings that can turn off all BADIs?
    Please help.
    Thanks,
    Sarath

    Further, when I created a fresh BADI implementation in a different system (a sandbox system), the BADI is working fine.
    But in the Development system the BADIs are still not getting triggered. I made the exact same implementation as the one which worked in the different system.
    Another point - when I see the Technical Information tab of queries from RSRT, or RSRT2  they have Virtual Characteristics/Key Figures "NO" in the development system.
    For the queries in the prototype system in which the BADI is working this field in "Y".
    Any idea how this is decided and how it can be changed to Y from NO?
    One more strange thing is that there are other active implementation of this BADI used by other teams here and none of them are getting triggered. They are all active and were all working fine till the last few days!
    Any help will be highly appreciated.
    Thanks,
    Sarath

  • BADI ME_PROCESS_PO_CUST not getting triggered

    Hello Experts,
    i implemeted BADI ME_PROCESS_PO_CUST to ZME_PROCESS_PO_CUST.
    there is only one badi implemented for this.
    And it is working fine in development and transported to Quality system.
    in Quality system this badi itself is not getting triggered.
    Please help me any body have any idea about this.
    Thanks in advance
    Mahammad Farooq

    Hi,
      check the below thread:
    LINK[BAdi - ME_PROCESS_PO_CUST  not trigger.;
    if every thing is active then the only issue could be multiple implementatins
    check in table SXC_EXIT to check the status .
    if there are any inactive implementations delete all and put in a request and transport to you QA system.
    Regards,
    Himanshu

Maybe you are looking for