Sun JMSJCA supports Websphere MQ bindings mode?

I am using the JMSJCA adapter (or unified JMS adapter as JCAPS calls it) with JCAPS 6 and Websphere MQ.
The documentation for JMSJCA states that JMSC_MQJMS_TP_CLIENT_MQ_TCPIP is supported, but does not mention JMSC.MQJMS_TP_BINDINGS_MQ:
https://jmsjca.dev.java.net/source/browse/*checkout*/jmsjca/jmsjca/unifiedjms/src/userdoc/sun-jms-adapter-readme.html
Does this mean that connecting to a Websphere MQ queue manager using bindings mode is NOT supported? I would rather use bindings mode than the extended transaction client since this will avoid TCP/IP as a connection overhead/potential point of failure.

Is it the complete stack trace? The root cause is not clear from the error message.
It could be similar to this issue Connection Problem To "JMS Queue XML"
You can also check support Note [ID 423987.1]
I would suggest contacting support channel to look into the exact problem.

Similar Messages

  • Remote Access VPN Support in Multiple Context Mode (9.1(2))?

    Hi Guys,
    I am currently running two Cisco ASA5520 (ASA Version: 9.1(2)) firewalls in Active/Standby failover and was contemplating the option of migrating my remote access VPN to these firewalls. However seeing that the new IOS now support mixed multiple context mode and dynamic routing. Is it safe to ask whether or not Remote Access VPN is now support in this IOS upgrade?
    Multiple Context Mode New Features:
    Site-to-Site VPN in multiple context mode | Site-to-site VPN tunnels are now supported in multiple context mode.
    New resource type for site-to-site VPN tunnels | New resource types, vpn other and vpn burst other, were created to set the maximum number of site-to-site VPN tunnels in each context.
    Dynamic routing in Security Contexts | EIGRP and OSPFv2 dynamic routing protocols are now supported in multiple context mode. OSPFv3, RIP, and multicast routing are not supported.
    New resource type for routing table entries | A new resource class, routes, was created to set the maximum number of routing table entries in each context. We modified the following commands: limit-resource, show resource types, show resource usage, show resource allocation. We modified the following screen: Configuration > Context Management > Resource Class > Add Resource Class.
    Mixed firewall mode support in multiple context mode | You can set the firewall mode independently for each security context in multiple context mode, so some can run in transparent mode while others run in routed mode. We modified the following command: firewall transparent. You cannot set the firewall mode in ASDM; you must use the command-line interface. Also available in Version 8.5(1).
    Regards,
    Leon

    Hey Leon,
    According to the ASA 9.1 Configuration Guide, Remote Access VPN is not yet supported with version 9.1(2). Only Site-to-Site VPN support in multiple context was introduced with release ASA 9.0(x). This was mentioned in the 9.0(x) release notes.
    Regards,
    Dennis

  • Workflows Do Not Start - "Not Supported in Windows Authentication Mode"

    I have a publishing site that is using Kerbos authentication.  Everything on the site works fine.
    I created a simple workflow in SPD 2013 and published this to the site without any problems.  However when I try to start the workflow with the account of a user who is a member of the site it will not run.  In the browser an alert pop's up
    saying "Something went wrong.  To try again, reload the page and then start the workflow again".
    In the SharePoint log's I find the following:
    SharePoint Server              Workflow Services              aj5oh Exception  System.NotSupportedException: Not supported
    in Windows authentication mode.     at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean isShareByLinkGuestUser)     at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials(WorkflowServicesContext
    context) StackTrace:  at Microsoft.Office.Server.Native.dll: (sig=1f86b0bf-2440-4b16-9099-860a571153c2|2|microsoft.office.server.native.pdb, offset=131CE) at Microsoft.Office.Server.Native.dll: (offset=21C85) 799af29b-db87-0034-c938-8a35e4082ffc
    This is a dev environment where everthing is setup on a single box, and I registered the workflow service in HTTP mode (which I allowed during the installation of workflow manager).
    Any ideas on what the problem might be?
    Thanks,
    Richard

    You haven't changed it to Claims there, you have changed NTLM to Kerberos. I guess your web app was already claims based because in SP 2013 we have to use Powershell to convert classic to claims and not from GUI.
    When I click the workflow on a item to start in manually I get the error:
    "Something went wrong. To try again, reload the page and then start the workflow"
    In ULS I get the not supported exception.
    It seems 2013 platform workflows aren't supported in classic mode web applications:
    http://sharepointconnoisseur.blogspot.co.uk/2012/11/sharepoint-2013-upgrade-preparation-to.html
    But I am not able to publish 2010 mode workflows in the classic web application, SPD 2013 throws error while publishing:
    "Unexpected error on server, wf cannot be associated"
    So does Infopath while publishing on to a list in that web application:
    -- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

  • [Non IE Regression] Support for full screen mode with multiple monitors

    This seems to be a regression with Flash Player v11.2.202.x (for all other browsers).
    With Internet Explorer it is still working.
    http://kb2.adobe.com/cps/890/cpsid_89050.html
    == Support for full screen mode with multiple monitors ==
    Full screen content will remain in full-screen on secondary monitors, allowing users to watch full-screen content while working on another display.
    Tested on Windows 7 x64 SP1 with:
    - Internet Explorer 9
    - Firefox Release, Beta, Aurora, Nightly
    - Opera 12 build 1116
    In bugbase.adobe.com I cannot choose v11.2.x

    Please vote for it If you have the same problem:
    https://bugbase.adobe.com/index.cfm?event=bug&id=3016912
    Thanks

  • Freehand SQL support in 3-Tier mode

    Hi All,
    I'm aware that Free hand SQL is not supported in 3-tier mode in XIR2
    Relevant SAP notes Iu2019ve found:
    1)     1202464 - Does Desktop Intelligence in 3-Tier mode support free hand SQL as a data provider?
    2)     1200737 - Free-hand SQL is not available in Desktop Intelligence
    Could anyone confirm that free hand SQL is not supported in 3-Tier mode for BOXI R3  (3.0 and 3.1)?
    Thanks in advance!
    Ankur.

    Hello Ankur, I have tested this issue on XI 3.1 with a pre release SP2 patch and Free Hand SQL is still NOT supported on this new version. This functionality will probably be never be supported due to more efforts being directed towads Webi tools.

  • Nokia 5800 - No Support for TV out-mode?

    I just recently realised that that is true for my set... That there is no support for TV out-mode... I've tried, audio comes out from my TV speakers but there is no visual. Is there anything at all that I can do to utilise this feature? I have after all been supplied with the wires and all...

    The Whole Story As Below, Anyone Can Help?
    [THREAD ID:1-3T7CFIN]
    SR 1-8296203408
    Dear Mr. Xh,
    Thank you for emailing Nokia Careline.
    In response to your email, your concern has been noted. We know that our supplier is doing everything in their power to remedy the situation. We suggest to check with your dealer if they have a policy regarding exchanges. We do apologize for the inconvenience caused.
    You may like to visit our website at www.nokia.com.my for more information and support for your Nokia device. If you have further enquiries, please write to us again or contact Nokia Careline at 1300 881600. We operate between the hours of 8.00am and 8.00pm, seven days a week.
    Kind regards,
    Ana V.
    Nokia Careline
    Do you know you can now update your phone software at your own convenience? Visit www.nokia.com.my/support to check if your phone model is supported and download the "Nokia Software Updater".
    -----Original Message-----
    From: 
    Sent:  03/10/2009 11:02:40 PM
    To:  [email protected]
    Subject:  Re: Nokia -Nokia 5800 Xpress Music - Tv- Out Inquiry
    Dear Nokia Careline,
    The "No Return Policy" already be used here. Seem that I have no choice to go for other alternatives. Maybe I have to file the case to our local authority i.e. Tribunal Court Claim to exercise my consumer right here.
    Perhaps, further blogs at Nokia discussion column, facebook, twitter might help to let others understand more about so-called Nokia Careline entertain their loyal customer.
    If you insist your stand there, then I am always ready to go for my alternatives.
    I won't let go unless you could satisfy me.
    --- On Thu, 10/1/09, [email protected] <[email protected]> wrote:
    From: [email protected] <[email protected]>
    Subject: Nokia - Nokia 5800 Xpress Music - Tv- Out Inquiry
    To:
    Date: Thursday, October 1, 2009, 3:39 AM
    Reference No.: SR# 1-8296203408
    Dear Mr. X,
    We appreciate your prompt reply.
    We will be noting for concern as a feedback. However, please be informed Mr. Tan that Nokia has noted in the box regarding the said case.
    The outage experienced by our sub-supplier was quite unexpected. Typically, the lead time for components such as this one is fairly long, and one cannot react to sudden changes at short notice. We value our relationship with our suppliers and sub-suppliers, and know that our sub-supplier is doing everything in their power to remedy the situation and return to regular supply.   
    The lack of TV out should not affect any other device functionalities besides that you will not be able to show/transmit pictures or video to external monitor/screen.
    As Nokia does not have a replacement policy, we suggest to check with your dealer if they have a policy regarding exchanges.
    Apologies for any inconvenience.
    You may like to visit our website at www.nokia.com.my for more information and support for your Nokia device. If you have further enquiries, please write to us again or contact Nokia Careline at 1300 881600. We operate between the hours of 8.00am and 8.00pm, seven days a week.
    Kind regards,
    Nicky E.
    Nokia Careline
    Do you know you can now update your phone software at your own convenience? Visit www.nokia.com.my/support to check if your phone model is supported and download the "Nokia Software Updater".
    [THREAD ID:1-3T7CFIN]
    -----Original Message-----
    From: 
    Sent:  30/09/2009 10:32:05 PM
    To:  [email protected]
    Subject:  Re: Nokia - Nokia 5800 Xpress Music - Tv- Out Inquiry
    Dear NOKIA CARELINE,
    Yap, you can tell me leaflet included & a tiny label on the pack box. But who will really check every single area of the pack box & read the whole manual or leaflet when they decided to buy the phone. What normally customer will check is the handphone and the accessories. Now you are telling me that customer have to check everything even they  buy something from a reputable company like Nokia. If I going in a shop that sell a China like Nokia 5800 handphone and I bought it then I won't have a say here at all.
    I have checked with my retailer they allow me to return the unit but I can't get full refund from them. They are going deduct a couple of hundred cause they said the unit is considered used unit now. According to them instead of asking customer to wait they prefer to refund the customer. So who is going to bear for the cost now.
    I certainly frustrated by getting a unit that without TV out function. If you are telling me that once manufactured the feature could not be added in, then I would say if you do have a unit with TV-out feature now you could exchange directly to your customer. Why still ask your loyal customer like me to refer to dealer or retailer. Is that what you mean after sales service or NOKIA CARELINE. You don't even care in the first place.
    Your apologies certainly couldn't be accepted with reason of Nokia did include leaflet to inform and tiny sticker at the bottom of the pack box. Sound irresponsible to me at all.
    What I wanna your care now, that is pls exchange a unit with TV-out feature with mine in which without such feature. Do I really put the CARELINE into difficulty position. Your reply to me is highly appreciated and also to show that you care or don't care.
    Regards,
    XX
    --- On Wed, 9/30/09, [email protected] <[email protected]> wrote:
    From: [email protected] <[email protected]>
    Subject: Nokia - Nokia 5800 Xpress Music - Tv- Out Inquiry
    To:
    Date: Wednesday, September 30, 2009, 5:14 AM
    Reference No.: SR# 1-8296203408
    Dear Mr. X,
    Thank you for emailing Nokia Careline.
    Greetings!
    In response to your inquiry, please be informed Mr. Tan that due to a component shortage, a limited number of Nokia 5800 Xpress Music has been manufactured without the TV-out functionality. It is possible that you have one of these devices. In that case, the sales package should have a sticker on the package and a leaflet inside the package that inform about the lack of TV-out functionality. Also, the TV-out cable has been removed from the affected sales packages.   
    Kindly take note Mr. Tan that it is not possible to add the feature after the device has been manufactured. Therefore we have labeled the affected sales packages with a sticker and included a leflet that inform about the lack of TV-out functionality. Those individuals who wish to have the TV-out functionality should wait for a sales package that that has it again.
    The new batch of phones should have the feature back. As this matter is clearly stated in the sales package, it is not possible to return to Nokia. However, you may check with your dealer if they have a policy regarding the return of the unit in exchange for a version that has the TV-out feature. Those individuals who wish to have the TV-out functionality should wait for a sales package that that has it again.
    Apologies for any inconvenience.
    You may like to visit our website at www.nokia.com.my for more information and support for your Nokia device. If you have further enquiries, please write to us again or contact Nokia Careline at 1300 881600. We operate between the hours of 8.00am and 8.00pm, seven days a week.
    Kind regards,
    Nicky E.
    Nokia Careline
    Do you know you can now update your phone software at your own convenience? Visit www.nokia.com.my/support to check if your phone model is supported and download the "Nokia Software Updater".
    [THREAD ID:1-3T7CFIN]
    -----Original Message-----
    From: 
    Sent:  30/09/2009 09:04:38 AM
    To:  [email protected]
    Subject:  WebForm Automated Email
    [Message:I bought a unit of Nokia 5800 last week for my wife. I discovered that the unit I bought is without TV support because when I tried to connect the TV cable that I bought. I tried to check the manual & pack box then only noticed a small label on the pack box stated no TV out supported. The retailer informed me that they only aware about this when I complained to them. I checked the discussion blogs, some stated because of worldwide component shortage so such function being omitted. I can't accept such explanation because I feel like I was being cheated by Nokia. Am I buying a pirated product now. Oh come on, how could Nokia so irresponsible to deliver the product with imcomplete function since TV out in general or ealier batch was included. Could you imagine if next time the product is delivered without GPS function, camera support, wifi & etc. by giving excuses of worldwide component shortage. What's the different buying a China Imitaion Product
    now. I certainly wanna to return my unit if such function was omitted. Please reply your loyal customer ASAP.]

  • Does ACE-30 support multicast in routed mode?

    We currently have ACE20's, which only support multicast in bridge mode.
    Was wondering if it's the same on ACE30's, or if Cisco finally implemented support for mcast in routed mode.
    thx
    Kevin

    Could you please confirm if this applies to both ACE20 & ACE30, or just ACE20?
    If both, when does Cisco plan on supporting mcast in routed mode?
    thx
    Kevin

  • Does Premiere Pro support a "self-record" mode?

    Does Premiere Pro support a "self-record" mode? It would record a new video with the source being what you are previewing, in terms of "animation" rather than in terms of the quality seen on screen. I often like to make humorous effects by dragging the time indicator back and forth, and have to resort to recording my own screen while in semi-fullscreen mode, then import that video and crop out the chrome. This obviously is not optimal and results in significant quality loss. Does Pr itself have such a feature built in?
    I doubt it does, but it would be extremely useful.

    Ditto what mark said. The intended purpose of the project manager is basically to do just as you said. It was a great solution for anyone that wanted to store the few usable minutes of their media and were confident in just discarding the rest. The problem is that, as Mark said, it doesn't handle the trimming of all common file types these days. That's because, in video, 'destructive' editing is always a matter of re-exporting edited versions and project manage simply cannot export every format to any format. The original files are never actually being trimmed down, you're just getting new versions to replace the old ones with. This represents another drawback in the form of generational loss. That's why the Project Trimmer many not be the ideal solution for you even if it is able to trim all applicable formats for you.
    I tend to agree with Jim and thing that the better way to go is with Prelude. With that app, you can log what you want before hand and then capture (or, more accurately, 'Ingest') just those parts from the start. Still, it might be a good idea to save the original footage on memory card(s), hard drive(s)s (or , dare I say, tape(s_?). That way if you find out later that you didn't capture (or ingest) all of what you wanted, you can always go back and get it. Also you'll have an additional backup which could easily be re-captured from the original source if you've save the prelude project(s).

  • Are VPN Clients supported in multiple context mode?

    Hi,
    Recently our company has bought two Cisco ASA 5515-X firewalls for at our datacenter. I am new on configuring a Cisco ASA but sofar things are looking good. I have configured them both with HA (active/active) in multiple context mode. Currently they host two security contexts.
    I want to configure VPN Client functionallity for Remote Access. As far as I know they come with two user licenses. But there is no VPN Client wizard available and I can't find a way to enable it.
    - Is VPN Client supported in Multiple Context mode?
    - What is AnyWhere Essentials vs Premium Peers?
    Boudewijn
    Here is some additional output fromt he current configuration:
    Cisco Adaptive Security Appliance Software Version 9.1(2) <context>
    Device Manager Version 7.1(3)
    Encryption hardware device : Cisco ASA-55xx on-board accelerator (revision 0x1)
                                 Boot microcode        : CNPx-MC-BOOT-2.00
                                 SSL/IKE microcode     : CNPx-MC-SSL-PLUS-T020
                                 IPSec microcode       : CNPx-MC-IPSEC-MAIN-0024
                                 Number of accelerators: 1
    Baseboard Management Controller (revision 0x1) Firmware Version: 2.4
    Licensed features for this platform:
    Maximum Physical Interfaces       : Unlimited      perpetual
    Maximum VLANs                     : 100            perpetual
    Inside Hosts                      : Unlimited      perpetual
    Failover                          : Active/Active  perpetual
    Encryption-DES                    : Enabled        perpetual
    Encryption-3DES-AES               : Enabled        perpetual
    Security Contexts                 : 2              perpetual
    GTP/GPRS                          : Disabled       perpetual
    AnyConnect Premium Peers          : 2              perpetual
    AnyConnect Essentials             : Disabled       perpetual
    Other VPN Peers                   : 250            perpetual
    Total VPN Peers                   : 250            perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 2              perpetual
    Total UC Proxy Sessions           : 2              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    IPS Module                        : Disabled       perpetual
    Cluster                           : Disabled       perpetual
    This platform has an ASA 5515 Security Plus license.

    Hi,
    No form of VPN Client is supported when you are using an ASA in Multiple Context mode.
    The only type of VPN supported in the newer 9.x softwares is L2L VPN / Site to Site VPN
    This might answer the VPN Licensing related question
    http://packetpushers.net/cisco-asa-licensing-explained/
    I never seem to remember it exactly myself even.
    - Jouni

  • Pls help!Can Oracle v7 support WebSphere Application Server instead of Oracle 8i

    Hi,
    I am using WebSphere as my application server and NT4.0 as OS.
    I wish to connect to Oracle db which is located at another server.
    Currently what I have is Oracle Client Software v7.3.4. There is error when I want to start the service.
    So I suspect that it is not compatible and it might require Oracle 8i in web environmt and to support WebSphere Application Server as well.
    Can anybody help me? Thank you.

    Hello,
    I guess you could get that to work as somebody was able to use WebLogic as webserver: http://christopherbeck.wordpress.com/2008/09/15/weblogic-server-and-apex/
    Alternatively you could use the Embedded PLSQL Gateway if you don't want to install Apache (depending database version you are on).
    Regards,
    Dimitri
    http://dgielis.blogspot.com/
    http://www.apex-evangelists.com/
    http://www.apexblogs.info/

  • ASA supports NAT in bridge mode??

    any one know if an ASA supports NAT in bridge mode? especially the 5580 series x??

    Hi Hans,
    Yes it does, from version 8.0 and higher.
    Unsupported Features
    These features are not supported in transparent mode:
    NAT /PAT
    NAT is performed on the upstream router.
    Note: Starting with ASA/PIX 8.0(2), NAT/PAT is supported in the transparent firewall.
    Here is the document:
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml#visits
    Mike

  • To SUN Technical Support - URGENT!!

    Hello Gentlemen!
    We are having problems with iPlanet Web Server version 4.1. We have installed this on Windows 2000 and the machine is P4 with 512 MB RAM.
    We are getting "httpd.exe causing reference error" at the time of booting of the machine as well as at the time of starting the web server.
    We tried numerous times uninstalling and re-installing iPlanet 4.1 after clearing the registry. We even tried formatting the hard drive, set up Windows 2000 and installed iPlanet 4.1.
    But, nothing works and keep on getting the same error...
    KIndly someone get me the solution ASAP as we are working on time bound application.
    Sincerely appreciate your time and efforts in advande ...

    Sun Technical Support representatives do not monitor this forum. To contact Technical Support, please refer to contact information at http://www.sun.com/service/contacting/solution.html

  • Do Sun's Support team really watch the forum topics these days?

    Do Sun's Support team really watch the forum topics these days? I really doubt it. I haven't seen anyone from Sun's support team really participating in the topics as per the following.
    Sun Engineers Participate in Forums! In addition to being able to get the answers you need from your peers, Sun's Developer Technical Support (DTS) engineers also visit the forums, to help get your questions answered.
    Any Comments...

    Do Sun's Support team really watch the forum topics
    these days? I really doubt it. I haven't seen anyone
    from Sun's support team really participating in the
    topics as per the following.
    Sun Engineers Participate in Forums! In addition to
    being able to get the answers you need from your
    peers, Sun's Developer Technical Support (DTS)
    engineers also visit the forums, to help get your
    questions answered.
    Any Comments...Hmmmm...that doesn't really have anything to do with layoffs.
    In the past different people using Sun signatures post fairly consistently for varying periods of time. I don't believe anyone ever did it more than 6 months. And that was only one individual. Most of the others don't seem to last more than a month.
    And my observation is that those that are doing the posting are not very experienced.

  • T61 bios not support Phoenix BootBlock recover mode?

    T61 bios not support  Phoenix BootBlock recover mode? how to use phoenix crisdisk  to recover from bad flash bios?
    ACER,HP OEM PHOENIX BIOS support.

    T61 bios not support  Phoenix BootBlock recover mode? how to use phoenix crisdisk  to recover from bad flash bios?
    ACER,HP OEM PHOENIX BIOS support.

  • Re: Why doesn't WL7.0 support get/post bindings for web services ...

    hi!!!
    Could you pls point to any code example.
    thanks
    Pushpa
    "Richard Berger" <[email protected]> wrote:
    >
    Manoj: Thanks for the answer - do you have or can you point me at any
    code samples
    that accomplish this? (Yes, .NET is limited to strings/ints in their
    get/post
    bindings).
    Thanks so much!
    RB
    PS - Also, can you explain any apparent discrepancy between your answer
    and what
    the WL documentation stated (again, it may be my misunderstanding).
    "manoj cheenath" <[email protected]> wrote:
    WL 7.0 does allow you to access the web service through
    the browser. It even allows you to invoke service methods
    with complex type arguments (.Net only supports primitive
    types) and also to view the request and response soap
    message for the invocation.
    regards,
    -manoj
    "Richard Berger" <[email protected]> wrote in message
    news:[email protected]...
    This might be a naive question, but according to the documentation,WL 7.0
    does
    not support http post/get bindings for web services. Thus, for meto
    access a
    web service, I need to write a "middle tier" of some sort (I used
    the
    automatically
    generated Java proxy code and JSP). All works fine, but it seems
    like
    it
    would
    sure be nice to have HTML forms access web services without havingto
    write a
    middle tier.
    NET does this and it is extremely useful - is there a reason that
    BEA
    chose not
    to provide this feature? (e.g. is it architecturally unsound in anyway?
    or is
    there an easy way to simulate it?). Given some of the Web Workshoppositioning
    re: ease of use and .NET comparison, this seems like an omission.
    Any insights are greatly appreciated.
    Enjoy,
    RB
    PS - Here's the info from the documentation
    Web Services Description Language (WSDL) 1.1 Specification
    WSDL is an XML-based language that describes Web services. WSDL definesWeb services
    as a set of endpoints operating on messages; these message containeither
    message-style
    or RPC-style information. The operations and messages are describedabstractly
    in WSDL, and then bound to a concrete network protocol and messageformat
    to define
    an endpoint. Related concrete endpoints are combined into abstractendpoints (services).
    WSDL is extensible to allow the description of endpoints and theirassociated
    messages regardless of what message formats or network protocols areused
    to communicate,
    however, the only bindings described in the specification describehow to
    use
    WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
    Note: WebLogic Server supports only SOAP 1.1 bindings.
    The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

    This isn't a straight FORM Post as in the http binding support in WSDL. It posts
    a soap message.
    It's apparent that Workshop supports form-post and form-get.
    But I dont see how it is done with straight WebLogic webservices. Does WebLogic
    server read the web-services.xml or the WSDL file? I dont see a way to put in
    http-post binding in the former and in the latter it seems to be ignored.
    Can someone clarify.
    Thanks.
    Chu-chi
    "manoj cheenath" <[email protected]> wrote:
    Here is a live example:
    http://65.193.192.35:7001/base/SoapInteropBaseService
    Here is an example that you can download:
    http://manojc.com/?sample2
    This is how you run it:
    http://manojc.com/?tutorial/doc/howtorun.html
    More info can be found from the edocs:
    7.0:
    http://edocs.bea.com/wls/docs70/webserv/index.html
    8.1:
    http://edocs.bea.com/wls/docs81/webserv/index.html
    Regards,
    -manoj
    http://manojc.com
    "pushpa krishna" <[email protected]> wrote in message
    news:[email protected]...
    hi!!!
    Could you pls point to any code example.
    thanks
    Pushpa
    "Richard Berger" <[email protected]> wrote:
    Manoj: Thanks for the answer - do you have or can you point me at
    any
    code samples
    that accomplish this? (Yes, .NET is limited to strings/ints in their
    get/post
    bindings).
    Thanks so much!
    RB
    PS - Also, can you explain any apparent discrepancy between your answer
    and what
    the WL documentation stated (again, it may be my misunderstanding).
    "manoj cheenath" <[email protected]> wrote:
    WL 7.0 does allow you to access the web service through
    the browser. It even allows you to invoke service methods
    with complex type arguments (.Net only supports primitive
    types) and also to view the request and response soap
    message for the invocation.
    regards,
    -manoj
    "Richard Berger" <[email protected]> wrote in message
    news:[email protected]...
    This might be a naive question, but according to the documentation,WL 7.0
    does
    not support http post/get bindings for web services. Thus, for
    me
    to
    access a
    web service, I need to write a "middle tier" of some sort (I used
    the
    automatically
    generated Java proxy code and JSP). All works fine, but it seems
    like
    it
    would
    sure be nice to have HTML forms access web services without havingto
    write a
    middle tier.
    NET does this and it is extremely useful - is there a reason that
    BEA
    chose not
    to provide this feature? (e.g. is it architecturally unsound in
    any
    way?
    or is
    there an easy way to simulate it?). Given some of the Web Workshoppositioning
    re: ease of use and .NET comparison, this seems like an omission.
    Any insights are greatly appreciated.
    Enjoy,
    RB
    PS - Here's the info from the documentation
    Web Services Description Language (WSDL) 1.1 Specification
    WSDL is an XML-based language that describes Web services. WSDL
    defines
    Web services
    as a set of endpoints operating on messages; these message containeither
    message-style
    or RPC-style information. The operations and messages are describedabstractly
    in WSDL, and then bound to a concrete network protocol and messageformat
    to define
    an endpoint. Related concrete endpoints are combined into abstractendpoints (services).
    WSDL is extensible to allow the description of endpoints and theirassociated
    messages regardless of what message formats or network protocols
    are
    used
    to communicate,
    however, the only bindings described in the specification describehow to
    use
    WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
    Note: WebLogic Server supports only SOAP 1.1 bindings.
    The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

Maybe you are looking for