Sun Studio 12 linker error

When linking, I get the following error on Studio 12 under Solaris 5.10.
It's a big program, which has been used for years and compiles fine with SUNPro62 Solaris 5.8 and 5.10 and
using g++ on Linux RH3 and RH4, 322-bit and 64-bit.
It's a heavily templated piece of code.
I've gotten patch 124863-03 already, which didn't help.
ld: warning: relocation error: R_SPARC_UA32: file SunOS-sparc/Desktop.o: symbol $XA1gnJKSLn8Gk6l.std::__stl_threshold:
external symbolic relocation against non-allocatable section .debug_info;
cannot be processed at runtime: relocation ignored
ld: warning: relocation error: R_SPARC_UA32: file SunOS-sparc/Desktop.o: symbol $XA1gnJKSLn8Gk6l.std::__stl_chunk_size:
external symbolic relocation against non-allocatable section .debug_info;
cannot be processed at runtime: relocation ignored
ld: warning: relocation error: R_SPARC_UA32: file /home/trunk/lib/SunOS-sparc/libtest.a(ActionPshellRaster.o): symbol $XA1gnJKx5m8GkIf.std::__stl_threshold:
external symbolic relocation against non-allocatable section .debug_info;
cannot be processed at runtime: relocation ignored
ld: warning: relocation error: R_SPARC_UA32: file /home/trunk/lib/SunOS-sparc/libutip.a(ActionPshellRaster.o): symbol $XA1gnJKx5m8GkIf.std::__stl_chunk_size:
external symbolic relocation against non-allocatable section .debug_info;
cannot be processed at runtime: relocation ignored
Undefined first referenced
symbol in file
$XA1gnJKSLn8Gk6l.std::__stl_threshold SunOS-sparc/Desktop.o
[Hint: static member std::__stl_threshold must be defined in the program]
$XA1gnJKx5m8GkIf.std::__stl_chunk_size /home/trunk/lib/SunOS-sparc/libtest.a(ActionPshellRaster.o)
[Hint: static member std::__stl_chunk_size must be defined in the program]
$XA1gnJKx5m8GkIf.std::__stl_threshold /home/trunk/lib/SunOS-sparc/libtest.a(ActionPshellRaster.o)
[Hint: static member std::__stl_threshold must be defined in the program]
$XA1gnJKSLn8Gk6l.std::__stl_chunk_size SunOS-sparc/Desktop.o
[Hint: static member std::__stl_chunk_size must be defined in the program]
ld: fatal: Symbol referencing errors. No output written to SunOS-sparc/test
gmake: *** [SunOS-sparc/test] Error 1
My co-worker posted the same problem here in September of last year, but was never able to resolve the issue.
Can anyone help me, or give me an idea where to look? The symbols mentioned are inside the system file algorithm.cc
Thanks,
Tom Jewell

Are you referring to this thread?
[http://forum.java.sun.com/thread.jspa?threadID=5218625]
We were unable to find a cause for the problem, or even duplicate the problem, based on the information provided. Apparently at that time you were working with a Sun Support engineer. You should return to that support channel. There's only so much we can do via the forum. Someone needs to look at your source code and build process in detail to figure out what the problem is.

Similar Messages

Compiling iperf on Solaris 10 8/07 w/ Sun Studio 12 -- Errors

/var/tmp/iperf-2.0.2 (nocc-testjump) #> /usr/local/bin/make
/usr/local/bin/make all-recursive
make[1]: Entering directory `/var/tmp/iperf-2.0.2'
Making all in compat
make[2]: Entering directory `/var/tmp/iperf-2.0.2/compat'
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include    -O2 -MT delay.o -MD -MP -MF ".deps/delay.Tpo" -c -o delay.o delay.cpp; \
        then mv -f ".deps/delay.Tpo" ".deps/delay.Po"; else rm -f ".deps/delay.Tpo"; exit 1; fi
In file included from /usr/include/sys/wait.h:24,
                 from /usr/include/stdlib.h:22,
                 from ../include/headers.h:78,
                 from ../include/Timestamp.hpp:63,
                 from delay.cpp:53:
/usr/include/sys/siginfo.h:259: 'ctid_t' is used as a type, but is not defined
   as a type.
/usr/include/sys/siginfo.h:260: 'zoneid_t' is used as a type, but is not
   defined as a type.
/usr/include/sys/siginfo.h:390: 'ctid_t' is used as a type, but is not defined
   as a type.
/usr/include/sys/siginfo.h:391: 'zoneid_t' is used as a type, but is not
   defined as a type.
make[2]: *** [delay.o] Error 1
make[2]: Leaving directory `/var/tmp/iperf-2.0.2/compat'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/iperf-2.0.2'
make: *** [all] Error 2
/var/tmp/iperf-2.0.2 (nocc-testjump) #> Any ideas why I'm getting this problem?

In general, if you are having a problem compiling Open Source code with Sun Studio, you need to try the community support portal for that code.
Start with the Iperf home page
[http://starplane.org/tooldoc/iperf/]
Often, Open Source code has been tried only with gcc, and won't build with other compilers without some effort.
If nobody else has tried using Sun Studio, you might need to do some debugging of configuration scripts and even source code.
The Iperf home page provides an address where you can report such problems.
In addition, older versions of autoconf and libtool don't work with Sun Studio, and can generate invalid makefiles. Be sure you have the current versions of both, if they are used by Iperf.

Linking Error : Undefined Symbols: SUN Studio 5

Hi ,
I am facing some Linking error which throws up Undefined Symbol errors like .
[Undefined                       first referenced
symbol                             in file
__rwstd::__rb_tree<DevNexus,DevNexus,__rwstd::__ident<DevNexus,DevNexus>,std::less<DevNexus>,std::allocator<DevNexus> >::iterator __rwstd::__rb_tree<DevNexus,DevNexus,__rwstd::__ident<DevNexus,DevNexus>,std::less<DevNexus>,std::allocator<DevNexus> >::erase(__rwstd::__rb_tree<DevNexus,DevNexus,__rwstd::__ident<DevNexus,DevNexus>,std::less<DevNexus>,std::allocator<DevNexus> >::iterator,__rwstd::__rb_tree<DevNexus,DevNexus,__rwstd::__ident<DevNexus,DevNexus>,std::less<DevNexus>,std::allocator<DevNexus> >::iterator) PacketServer.o
__type_0 std::find<std::deque<AdapterPort,std::allocator<AdapterPort> >::iterator,AdapterPort>(__type_0,__type_0,const __type_1&) PacketServer.o
void std::vector<Controller,std::allocator<Controller> >::__insert_aux(Controller*,const Controller&) Subsystem.o
void std::deque<AdapterDisc,std::allocator<AdapterDisc> >::__allocate_at_end() PacketServer.o
__rwstd::__rb_tree<unsigned long,std::pair<const unsigned long,char*>,__rwstd::__select1st<std::pair<const unsigned long,char*>,unsigned long>,std::less<unsigned long>,std::allocator<std::pair<const unsigned long,char*> > >::iterator __rwstd::__rb_tree<unsigned long,std::pair<const unsigned long,char*>,__rwstd::__select1st<std::pair<const unsigned long,char*>,unsigned long>,std::less<unsigned long>,std::allocator<std::pair<const unsigned long,char*> > >::erase(__rwstd::__rb_tree<unsigned long,std::pair<const unsigned long,char*>,__rwstd::__select1st<std::pair<const unsigned long,char*>,unsigned long>,std::less<unsigned long>,std::allocator<std::pair<const unsigned long,char*> > >::iterator,__rwstd::__rb_tree<unsigned long,std::pair<const unsigned long,char*>,__rwstd::__select1st<std::pair<const unsigned long,char*>,unsigned long>,std::less<unsigned long>,std::allocator<std::pair<const unsigned long,char*> > >::iterator) DeviceProp.o
std::deque<AdapterPort,std::allocator<AdapterPort> >::~deque() PacketServer.o
__type_0 std::find<std::deque<AdapterDisc,std::allocator<AdapterDisc> >::iterator,char*>(__type_0,__type_0,const __type_1&) PacketServer.o
unsigned std::deque<AdapterPort,std::allocator<AdapterPort> >::__buffer_size() PacketServer.o
unsigned std::deque<AdapterDisc,std::allocator<AdapterDisc> >::__buffer_size() PacketServer.o
void __rwstd::__rb_tree<DevNexus,DevNexus,__rwstd::__ident<DevNexus,DevNexus>,std::less<DevNexus>,std::allocator<DevNexus> >::__deallocate_buffers() PacketServer.o
std::deque<AdapterDisc,std::allocator<AdapterDisc> >::~deque() PacketServer.o
ld: fatal: Symbol referencing errors. No output written to spagent
*** Error code 1
make: Fatal error: Command failed for target `spagent'
Current working directory /home/kiranc/solaris_hang1/4.0/agent
*** Error code 1
make: Fatal error: Command failed for target `recurse'
Current working directory /home/kiranc/solaris_hang1/4.0/agent
*** Error code 1
make: Fatal error: Command failed for target `all'
I am using Sun Studio 5. Pls let me know how to resolve/fix this. Unfortunately I cant upgrade the Sun Studio.
Thanks in Advance
Kiran

Hi Kiran ,
if you cannot upgrade Sun Studio, I suggest that you take a view on this solution:
http://forum.java.sun.com/thread.jspa?forumID=850&threadID=5069680
It only works to std::vector::__insert_aux method, but I think you could get some useful idea from it.
Good luck.
Bye.

Sun Studio 11 do not parse make output and create link to file?

Hi,
Running Sun Studio 11 and can only get file links in the output window when I run a make command that uses CC -g (debug option). We have integrated other tools into our make system (flexlint, cppUnit..) and even though we make sure that the syntax is exactly the same as the compiler output and matches regular expression under tools->options->building->make settings->error expression, it doesn't work. Why do you have to debug compile to get sun studio to create a file link in the output window? Doesn't sun studio just parse the text from the make command?
example of flexlint output for which no link is created:
"/vobs/project/oss/fm/fm4/fm-fmalib/fmbal/fmaaulib/src/FMA_List.cc", line 440: Error 84: sizeof object is zero or object is undefined'�
example of make debug output for which we do get a link:
"/vobs/project/oss/fm/fm4/fm-fmalib/fmbal/SunOS5.10/inc/FMA_alarm_record.hh", line 1310: Warning (Anachronism):Info "static" is not allowed and is being ignored.
Regards,
Ola

I'd second Maxim's suggestion: try NetBeans 5.5 with C/C++ Development Pack. The official release of NetBeans C/C++ Development Pack 5.5 has happened a few days ago. You can download it from
http://www.netbeans.info/downloads/all.php?b_id=2284
Some of the changes between the beta3 build and FCS are:
* Significant performance improvements in the code parser resulting in faster results in the Class View and Code Completion
* Programs now run in an external terminal (system dependent) by default. This allows better input control
* Significant performance improvement in the debugging module
* Significant functionality improvement in the debugging module
* New project type "C/C++ Project From Existing Code" which simplifies creating a project from existing code
* Macro support in code completion
* Hyperlink navigation for macro usages and #include directives
* Reformat code
* Code folding
* Code completion
All these features will appear in next Sun Studio release, so you can
consider NetBeans C/C++ Development Pack 5.5 as a preview of new
Sun Studio IDE.

Sun Studio 12u1 cc passes empty filename strings to the linker

Hi,
Sun Studio 12u1 cc passes empty filename strings to the linker, as demonstrated with the following
trivial test case.
This problem occurs while trying to compile the Boost 1.42 beta 1 libraries with Sun Studio 12u1.
goanna% cat e.c
int main()
return 0;
goanna% cc -V
cc: Sun C 5.9 SunOS_i386 Patch 124868-11 2009/11/21
usage: cc [ options] files. Use 'cc -flags' for details
goanna% cc "e.c" ""
goanna% kde12u1
goanna% cc -V
cc: Sun C 5.10 SunOS_i386 Patch 142363-03 2009/12/03
usage: cc [ options] files. Use 'cc -flags' for details
goanna% cc "e.c" ""
ld: fatal: file : open failed: No such file or directory
ld: fatal: File processing errors. No output written to a.out
goanna%
Thanks, Mark

Thanks for filing the bug report. It will be visible at [http://bugs.sun.com] in a day or two as bug 6921481.

Strange C++ error when using newer Sun Studio compiler

My company has just set up a new build machine for our product. We have gone from
this version: CC: Sun C++ 5.7 Patch 117830-11 2007/04/04
to this one: CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
we have also upgraded the OS (solaris/sparc). I think the new one has gcc but the old one doesn't (we don't use it).
and now I am getting this error:
"/opt/SUNWspro/prod/include/CC/./new", line 32: Error, badextlnk: operator new(unsigned) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 35: Error, badextlnk: operator delete(void*) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 37: Error, badextlnk: operator new[](unsigned) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 40: Error, badextlnk: operator delete[](void*) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 53: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 54: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 55: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 56: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 106: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 169: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 185: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 198: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 202: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 206: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 217: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 225: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 239: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 249: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 264: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 275: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
I have no idea what could be causing this. I can find one link to it on this forum: http://forums.sun.com/thread.jspa?messageID=9488983 . But the only answer to that query says it is the same as another bug which appears entirely different, not to mention being very old (while talking about an imminent fix), and being related to a different OS and (I think) a different version of sun studio (express vs. normal?).
Any ideas? Could it be related to having gcc/g++ on the machine?

Hi,
I am also facing the same error while upgrading the Sun compiler description as below
when I am compiling the cxx file on the system with compiler version (CC: Sun C++ 5.9 SunOS_sparc 2007/05/03) , I am facing the following error:-
/opt/SUNWspro/bin/CC -dy -misalign -xcode=abs64 -xarch=v9 -D__EXTENSIONS__ -Dsun4_R5=1 -I. -Isun4_R5_v -I/home/as185259/ash_iadraid/ash_get_10/IA/PORT/include -I/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v -I/app/oracle/product/10.2.0/client_1/sqllib/public -I/app/oracle/product/10.2.0/client_1/precomp/public -I/opt/informix/include -DSVR4 -O -g p -pta -c MContext.cxx -o sun4_R5_v/MContext.o || \
(rm -f sun4_R5_v.d; false)CC: Warning: -xarch=v9 is deprecated, use -m64 to create 64-bit programs
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 97: Error: Only one of a set of overloaded functions can be extern "C".
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 99: Error: Only one of a set of overloaded functions can be extern "C".
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 101: Error: Only one of a set of overloaded functions can be extern "C".
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 102: Error: Only one of a set of overloaded functions can be extern "C".
4 Error(s) detected.
The same file with the same compilation command is getting compiled with compiler version CC: Sun WorkShop 6 update 2 C+ 5.3 2001/05/15 .
Can anyone suggest what should be the resolution:-
The code for the ssmalloc.h file is as under:-
#ifndef SSMALLOC_H
#define SSMALLOCH
#include <stddef.h>
#if defined(__sparcv9)
namespace ssmalloc {
#endif
#if defined(__cplusplus)
extern "C" {
#endif
The type for the malloc routine depends on
the compiler and library that you are using.
#if defined(hpux) || defined(sun4_R5) || defined(__GNUC_) || defined(_OS2_)
typedef void MALLOC_PTR;
#else
typedef char *MALLOC_PTR;
#endif
#if defined(_GNUG_)
typedef size_t MALLOC_SIZE;
#else
typedef unsigned MALLOC_SIZE;
#endif
#if defined(sun4) && ! defined(_GNUG_)
# define FREE_RETURNS int
# define FREE_RETURN return 0
#else
# define FREE_RETURNS void
# define FREE_RETURN return
#endif
// User-callable routines.
// Note: memalign and valloc are broken in that they do not aling
// memory on documented boundaries, and thus do not behave as described
// on the "malloc" manual page. They simply call malloc.
MALLOC_PTR malloc (MALLOC_SIZE size);
FREE_RETURNS free (MALLOC_PTR data);
MALLOC_PTR realloc (MALLOC_PTR data, MALLOC_SIZE size);
MALLOC_PTR calloc (size_t nelem, size_t elsz);
MALLOC_PTR valloc (unsigned size);
MALLOC_PTR memalign (unsigned alignment, unsigned size);
// This memory allocator supports memory allocation inside signal
// handlers. For correct operation, the following functions must be
// called upon entering and exiting signal handlers that allocate
// memory.
void ssmalloc_enter_signal_level();
void ssmalloc_exit_signal_level();
// Set this variable to not 0 (possibly in the debugger) if you want
// to get malloc to check memory data structures very carefully as it
// goes. This may be handy if you are trying to detect a memory
// trasher.
// It also causes ssmalloc to abort the program instead of returning
// zero if memory runs out.
extern int check_memory_very_carefully;
#if defined(__cplusplus)
#endif
#if defined(__sparcv9)
} // namespace ssmalloc {
#endif
#endif / SSMALLOCH */
The Machine is
root@ldg1-> uname -a
SunOS ldg1 5.10 Generic_138888-03 sun4v sparc SUNW,Sun-Blade-T6320
Thanks
Vijay

Link error in Workshop 6u2 with lib built by Studio 9

I have a shared library built with Sun Studio 9.
I'm trying to use it in an application that I build using Sun
Workshop 6 update 2.
This gives me a link error:
Undefined symbol first referenced in file
__rwstd::__null_string_ref_rep<char,std::char_traits<char>,
std::allocator<char>,__rwstd::__string_ref_rep<std::allocator<char>
>>::__null_string_ref_rep()
/home/me/lib/libFoo.so
std::basic_string<char,std::char_traits<char>,std::allocator<char>>::~basic_string()
/home/me/lib/libFoo.so
The lib is built using:
JAVA_INCLUDE = -I${JAVA_HOME}/include -I${JAVA_HOME}/include/solaris
JAVA_LIBS = -L${JAVA_HOME}/jre/lib/sparc -L${JAVA_HOME}/jre/lib/sparc/client
CXX = g++
CXXFLAGS = -g -w -fPIC -I./include ${JAVA_INCLUDE}
LDFLAGS = -shared ${JAVA_LIBS} -ljava -ljvm
$(CXX) ${LDFLAGS} ${LIBS} -o ../$@ ${OBJS}
Any ideas what could be wrong?
Thanks in advance,
/Mikael

You can use a binary created by an older compiler in a program built with a newer compiler. We take care not to invalidiate old binary interfaces in new compilers.
You cannot use a binary created by a newer compiler in a program built with an older compiler. The newer compiler will in general use features from headers or system libraries that are unknown to the older compiler.
If you have a set of binaries created by different compiler versions, you must build the final program using a compiler at least as new as the newest compiler that was used.
Similar rules apply to verions of Solaris where the binaries are built. If you build a binary on an older Solaris version, you can use it on a newer Solaris version -- but not the reverse.

Sun Studio 11 Dbx Java error.

Hello!
Each time I try to download ANY program into the dbx I got the following error:
Annotation: Exception occurred in Request Processor
java.lang.NoClassDefFoundError
     at com.sun.tools.debugger.dbxgui.utils.IpeUtils.getUnixEnv(IpeUtils.java:514)
     at com.sun.tools.debugger.dbxgui.utils.IpeUtils.getenv(IpeUtils.java:465)
     at com.sun.tools.debugger.dbxgui.debugger.RunConfig.writeDocument(RunConfig.java:1636)
     at com.sun.tools.debugger.dbxgui.debugger.RunConfig.save(RunConfig.java:1030)
     at com.sun.tools.debugger.dbxgui.debugger.actions.LoadDialogAction.actionPerformed(LoadDialogAction.java:118)
     at com.sun.tools.debugger.dbxgui.debugger.actions.LoadDialogAction.actionPerformed(LoadDialogAction.java:98)
     at org.netbeans.core.ModuleActions$1.run(ModuleActions.java:97)
     at org.openide.util.Task.run(Task.java:136)
     at org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:328)
[catch] at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:670)
I'm running Linux 2.6.9-34.ELsmp on x86_64 AMD processor.
Java: java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.5.0_06-b05, mixed mode)
Can someone help?
Thanks.

Thanks.
I suspected something like this. Can you please tell me how can I switch between 32 and 64 java libraries? Can it be done for Sun Studio only without affecting other applications using java? I mean, without changing path in /usr/bin/java link?
Thanks again.

Sun Studio Express - February 2008 download link points to internal site

The download link at http://developers.sun.com/sunstudio/downloads/ssx/readme.html, part 4 points to a Sun internal
site (http://dscpreview.sfbay/sunstudio/downloads/express.jsp).
Can this be fixed ?

Not exactly the same topic, but it is not currently possible to download the express edition of Sun Studio due to an error that occurs when submitting an email address. The error given (from http://subscriptions.sun.com/util/sunmail.jsp) is:
Error : Requested action failed for the email address [email protected]
SunMailThread : nullAttempting to use the "Send Comments" link is also met with failure. After I fill out all the information, it sends me to a page with just the first and last name fields highlighted, as if to tell me they need to be filled in (yet - they are), but there is no form to submit on this page. Hence, I am stuck.
So, I come here in hopes that both these problems get fixed sometime!

Error message when starting Sun Studio express IDE

When I start the Sun Studio express IDE version 3/09 I get the following error message:
java.lang.IllegalArgumentException: Instance_urn = urn:st: already exists in the registration data.
     at org.netbeans.modules.servicetag.RegistrationData.addServiceTag(RegistrationData.java:343)
     at org.netbeans.modules.servicetag.RegistrationDocument.addServiceTags(RegistrationDocument.java:304)
     at org.netbeans.modules.servicetag.RegistrationDocument.load(RegistrationDocument.java:126)
     at org.netbeans.modules.servicetag.RegistrationData.loadFromXML(RegistrationData.java:433)
     at com.sun.tools.swdev.sunstudio.registration.SSServiceTagSupport.getRegistrationData(SSServiceTagSupport.java:257)
     at com.sun.tools.swdev.sunstudio.registration.SSServiceTagSupport.getSSServiceTag(SSServiceTagSupport.java:306)
     at com.sun.tools.swdev.sunstudio.registration.SSServiceTagSupport.createSSServiceTag(SSServiceTagSupport.java:157)
     at com.sun.tools.swdev.sunstudio.registration.SSInstaller.restored(SSInstaller.java:97)
     at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:419)
     at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:340)
     at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
     at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
     at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
     at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
     at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
     at org.netbeans.core.startup.Main.start(Main.java:312)
     at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
[catch] at java.lang.Thread.run(Thread.java:619)

Hello!
I googled "SSServiceTagSupport.java:257" and found out that it is filed as IZ 154094 against Netbeans:
http://www.netbeans.org/issues/show_bug.cgi?id=154094
Actually it was reported many times:
http://www.netbeans.org/issues/show_bug.cgi?id=151921
It suggests a few workarounds.
Workaround 1:
"Simple workaround is to disable registration using command line option -J-Dnb.registration.enabled=false"
Workaround 2:
"The file ~/.netbeans-registration/6.5/registration.xml is empty, so I have this file erased and restarted the IDE.
After this step, the file was not regenerated, but the IDe starts now without this problem."
Please, try one of them.
Thanks,
Nik

Sun Studio C++ v5.3 adding complex gives errors

If anyone can privide info on the following issue I would greatly appreciate it.. I have a simple test app that does not compile. This is with Sun Studion C++ v5.3 (I think then called Sun Workshop Pro) on a Solaris 5.8 machine.
#include <complex>
using namespace std;
int main()
complex<int> a(1, 2);
complex<int> b(3, 4);
complex<int> c;
c = a + b;
cout << "Answer: " << c << endl;
return 0;
}When compiling I get the following error:
/opt/SUNWspro/WS6U2/include/CC/Cstd/complex Line 1006: Error The operation "std::complex<int> += const std::complex<int> is illegal
sol_cpx.cc Line 10 Where: While instantiating std::complex<int>+ ( const std::complex<int>, const std::complex<int> )
sol_cpx.cc Line 10 Where: Instantiated from non-template code
Are there any compiler flags to handle this or is there an update I can get to fix this? Any help would be much appreciated since I'm clueless. Thank you!

complex<int> is not supported. The only specializations of type complex are float, double, and long double.
The suggestion to try stlport won't work with C++ 5.3.
We began supplying stlport with C++ 5.4.
C++ 5.3 has been declared End Of Life, and only limited support is available for it. You can download a copy of the current release, Sun Studio 10, and try it free for 60 days.
http://www.sun.com/software/products/studio/index.xml

Assembly error on Sun Studio 11 - Solaris 10/amd64

Hi All
I am compiling my source code using cc. My cc version is
cc: Sun C 5.8 2005/10/13
I am using Sun Studio 11 and Solaris 10 on amd64 for my build.
I am getting following Assemply errors when compiling my code.
cc -xarch=amd64 -Kpic gptas.c
Assembler:
"/tmp/yabeAAALdaqGz", line 31 : Illegal mnemonic
"/tmp/yabeAAALdaqGz", line 34 : Syntax error
"/tmp/yabeAAALdaqGz", line 37 : Syntax error
"/tmp/yabeAAALdaqGz", line 50 : Illegal mnemonic
Failure in /opt/ss11/SUNWspro/prod/bin/fbe, status = 0x7f00
Fatal Error exec'ing /opt/ss11/SUNWspro/prod/bin/fbe
cc: acomp failed for gptas.c
The c code which I'm trying to compile:
/*ARGSUSED*/
int
#if defined(__STDC__) || defined(__cplusplus)
gptas(unsigned *x, short flag)
#else
gptas(x,flag)
unsigned *x;
short flag;
#endif
#ifdef __STDC__
volatile int r; /* volatile so optimizers won't get
* rid of variable - some assembly code
* depends on offsets with this on
* the stack.
#else
int r; /* var to return explicitly */
#endif
r = 0; /* always set return to 0 */
asm(" movl $1,%eax"); /* this 1 inworking reg will set x /
asm(" pushl %ebx"); /* save the register; eax already saved */
asm(" movl 8(%ebp),%ebx"); /* move the address of x */
asm(" xchg %eax,(%ebx)"); /* atomic swap a one with x /
asm(" cmp $0,%eax"); /* test what was in x /
asm(" jnz .A9999"); /* jump if x was already set /
r = 1; /* indicate set occurred */
asm(" .A9999:");
asm(" popl %ebx"); /* restore the register */
return(r);
Can someone let me know if this is a Compiler issue or it has something to do with my code .
I'll Appreciate any help on this.
Thanks in Advance
Somak

If you specify -S compiler option, assembly file will be produced and it enables you to look at the code assembler is complaining about. For example:
/ASM
pushl %ebx <== line 31
/ASMEND
I'm not too familiar with AMD64 ABI, but it is possible that you can't use 32-bit registers in 64 bit mode with some operations like memory (including stack) access.
I was able to compile code with the following changes:
asm(" movl $1,%eax"); /* this 1 inworking reg will set x /
asm(" pushl %rbx"); /* save the register; eax already saved */
asm(" movl 8(%rbp),%ebx"); /* move the address of x */
asm(" xchg %eax,(%rbx)"); /* atomic swap a one with x /
asm(" cmp $0,%eax"); /* test what was in x /
asm(" jnz .A9999"); /* jump if x was already set /
r = 1; /* indicate set occurred */
asm(" .A9999:");
asm(" popl %rbx"); /* restore the register */

Compilation error while building boost 1_44_0 on Solaris (Sun Studio 10)

Hi All, I am trying to build boost version 1_44_0 on Solaris.The Solaris box has Sun Studio 10 installed.
The compiler details are
bash-2.05$ CC -V
CC: Sun C++ 5.7 2005/01/07
I am using the following command to build boost libraries
*bash-2.05$ bjam --build-dir=/export/home/dfdev/Boost_1_44_0/boost_1_44_0/tmp/build-boost toolset=sun stage*
But i get the below compilation errors, not even one of the projects build
sun.compile.c++ /export/home/dfdev/Boost_1_44_0/boost_1_44_0/tmp/build-boost/boo
st/bin.v2/libs/iostreams/build/sun/release/stdlib-sun-stlport/threading-multi/fi
le_descriptor.o
Notice: The Early Access serial number will expire in -7 days.
In order to purchase the product, visit http://www.sun.com/forte/buy.html
or contact your Forte Tools reseller.
"libs/iostreams/src/file_descriptor.cpp", line 352: Error: Could not find boost:
:shared_ptr<boost::iostreams::detail::file_descriptor_impl>::shared_ptr(boost::i
ostreams::detail::file_descriptor_impl*) to initialize pimpl_.
"libs/iostreams/src/file_descriptor.cpp", line 355: Error: Could not find boost:
:shared_ptr<boost::iostreams::detail::file_descriptor_impl>::shared_ptr(boost::i
ostreams::detail::file_descriptor_impl*) to initialize pimpl_.
"libs/iostreams/src/file_descriptor.cpp", line 360: Error: Could not find boost:
:shared_ptr<boost::iostreams::detail::file_descriptor_impl>::shared_ptr(boost::i
ostreams::detail::file_descriptor_impl*) to initialize pimpl_.
"libs/iostreams/src/file_descriptor.cpp", line 380: Error: Could not find boost:
:shared_ptr<boost::iostreams::detail::file_descriptor_impl>::shared_ptr(boost::i
ostreams::detail::file_descriptor_impl*) to initialize pimpl_.
"libs/iostreams/src/file_descriptor.cpp", line 385: Error: Could not find boost:
:shared_ptr<boost::iostreams::detail::file_descriptor_impl>::shared_ptr(boost::i
ostreams::detail::file_descriptor_impl*) to initialize pimpl_.
"libs/iostreams/src/file_descriptor.cpp", line 393: Error: Using static_cast to
convert from boost::iostreams::file_descriptor_flags to boost::iostreams::detail
::file_descriptor_impl::flags not allowed.
6 Error(s) detected.
"CC" -library=stlport4 -xO4 -mt -erroff=%none -KPIC -DBOOST_ALL_NO_LIB=1 -DB
OOST_IOSTREAMS_DYN_LINK=1 -DBOOST_IOSTREAMS_USE_DEPRECATED -DNDEBUG -I"." -c -o
"/export/home/dfdev/Boost_1_44_0/boost_1_44_0/tmp/build-boost/boost/bin.v2/libs/
iostreams/build/sun/release/stdlib-sun-stlport/threading-multi/file_descriptor.o
" "libs/iostreams/src/file_descriptor.cpp"
...failed sun.compile.c++ /export/home/dfdev/Boost_1_44_0/boost_1_44_0/tmp/build
-boost/boost/bin.v2/libs/iostreams/build/sun/release/stdlib-sun-stlport/threadin
g-multi/file_descriptor.o...
sun.compile.c++ /export/home/dfdev/Boost_1_44_0/boost_1_44_0/tmp/build-boost/boo
st/bin.v2/libs/iostreams/build/sun/release/stdlib-sun-stlport/threading-multi/ma
pped_file.o
Notice: The Early Access serial number will expire in -7 days.
In order to purchase the product, visit http://www.sun.com/forte/buy.html
or contact your Forte Tools reseller.
"./boost/type_traits/is_array.hpp", line 41: Error: Multiple declaration for boo
st::is_array.
"./boost/type_traits/is_array.hpp", line 42: Error: Multiple declaration for boo
st::is_array.
"./boost/type_traits/is_array.hpp", line 43: Error: Multiple declaration for boo
st::is_array.
"./boost/type_traits/is_array.hpp", line 44: Error: Multiple declaration for boo
st::is_array.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 95: Error: The type
of specialized argument boost::mpl::aux::F<boost::mpl::aux::P1> is dependent on
another argument.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 95: Error: Partial s
pecialization parameter Tag is not used in the arguments.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 112: Error: Partial
specialization parameter F is not used in the arguments.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 172: Error: The type
of specialized argument boost::mpl::aux::F<boost::mpl::aux::P1, boost::mpl::aux
::P2> is dependent on another argument.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 172: Error: Partial
specialization parameter Tag is not used in the arguments.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 189: Error: Partial
specialization parameter F is not used in the arguments.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 254: Error: The type
of specialized argument boost::mpl::aux::F<boost::mpl::aux::P1, boost::mpl::aux
::P2, boost::mpl::aux::P3> is dependent on another argument.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 254: Error: Partial
specialization parameter Tag is not used in the arguments.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 271: Error: Partial
specialization parameter F is not used in the arguments.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 339: Error: The type
of specialized argument boost::mpl::aux::F<boost::mpl::aux::P1, boost::mpl::aux
::P2, boost::mpl::aux::P3, boost::mpl::aux::P4> is dependent on another argument
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 339: Error: Partial
specialization parameter Tag is not used in the arguments.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 357: Error: Partial
specialization parameter F is not used in the arguments.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 427: Error: The type
of specialized argument boost::mpl::aux::F<boost::mpl::aux::P1, boost::mpl::aux
::P2, boost::mpl::aux::P3, boost::mpl::aux::P4, boost::mpl::aux::P5> is dependen
t on another argument.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 427: Error: Partial
specialization parameter Tag is not used in the arguments.
"./boost/mpl/aux_/preprocessed/plain/full_lambda.hpp", line 445: Error: Partial
specialization parameter F is not used in the arguments.
"libs/iostreams/src/mapped_file.cpp", line 441: Error: Could not find boost::sha
red_ptr<boost::iostreams::detail::mapped_file_impl>::shared_ptr(boost::iostreams
::detail::mapped_file_impl*) to initialize pimpl_.
20 Error(s) detected.
Am i missing something? I will appreciate your input's.
Regards,
solarisneo

C++ 5.7 will not give good results building Boost.
Support for boost began with C++ 5.9 (Sun Studio 12), but you will get better results using the current release, Sun Studio 12 update 1, and better still with the upcoming release, Oracle Solaris Studio 12.2.

Error in compiling boost example program using sun studio 12

I am trying to compile the below example program from boost using sun studio 12 C++ compiler.
#include <boost/interprocess/shared_memory_object.hpp>
#include <boost/interprocess/mapped_region.hpp>
#include <cstring>
#include <cstdlib>
#include <string>
int main(int argc, char *argv[])
using namespace boost::interprocess;
if(argc == 1)
{ //Parent process
//Remove shared memory on construction and destruction
struct shm_remove
shm_remove() { shared_memory_object::remove("MySharedMemory"); }
~shm_remove(){ shared_memory_object::remove("MySharedMemory"); }
} remover;
//Create a shared memory object.
shared_memory_object shm (create_only, "MySharedMemory", read_write);
//Set size
shm.truncate(1000);
//Map the whole shared memory in this process
mapped_region region(shm, read_write);
//Write all the memory to 1
std::memset(region.get_address(), 1, region.get_size());
//Launch child process
std::string s(argv[0]); s += " child ";
if(0 != std::system(s.c_str()))
return 1;
else
//Open already created shared memory object.
shared_memory_object shm (open_only, "MySharedMemory", read_only);
//Map the whole shared memory in this process
mapped_region region(shm, read_only);
//Check that memory was initialized to 1
char mem = static_cast<char>(region.get_address());
for(std::size_t i = 0; i < region.get_size(); ++i)
if(*mem++ != 1)
return 1; //Error checking memory
return 0;
Using the below command :
CC -c 1.cpp -I/home/syogacha/satish/boost_1_43_0 -library=stlport4
"/home/syogacha/satish/boost_1_43_0/boost/interprocess/shared_memory_object.hpp", line 284: Error: The function "shm_open" must have a prototype.
"/home/syogacha/satish/boost_1_43_0/boost/interprocess/shared_memory_object.hpp", line 307: Error: The function "shm_unlink" must have a prototype.
"/home/syogacha/satish/boost_1_43_0/boost/interprocess/mapped_region.hpp", line 549: Error: Formal argument 1 of type char* in call to shmdt(char*) is being passed void*.
3 Error(s) detected.
I even tried to include sys/mman.h but got the same compilation errors.
Do we need to take care of few other specific things while using boost headers.
Thanks in advance ...

Hope this helps....
#include <sys/mman.h>
#include <boost/interprocess/shared_memory_object.hpp>
#include <boost/interprocess/mapped_region.hpp>
#include <cstring>
#include <cstdlib>
#include <string>
#include <iostream>
#include <iterator>
int main(int argc, char *argv[])
{      //main
        using namespace boost::interprocess;
        if(argc == 1)
        { //Parent process
                //Remove shared memory on construction and destruction
                struct shm_remove
                        shm_remove() { shared_memory_object::remove("MySharedMemory"); }
                        ~shm_remove(){ shared_memory_object::remove("MySharedMemory"); }
                } remover;
                //Create a shared memory object.
                shared_memory_object shm (create_only, "MySharedMemory", read_write);
                //Set size
                shm.truncate(1000);
                //Map the whole shared memory in this process
                mapped_region region(shm, read_write);
                //Write all the memory to 1
               std::memset(region.get_address(), 1, region.get_size());
                //Launch child process
                std::string s(argv[0]); s += " child ";
                if(0 != std::system(s.c_str()))
                return 1;
        else
                //Open already created shared memory object.
                shared_memory_object shm (open_only, "MySharedMemory", read_only);
                //Map the whole shared memory in this process
                mapped_region region(shm, read_only);
                //Check that memory was initialized to 1
                char *mem = static_cast<char*>(region.get_address());
                for(std::size_t i = 0; i < region.get_size(); ++i)
                if(*mem++ != 1)
                return 1;   //Error checking memory
        return 0;
}

Using boost::thread with Sun Studio C++ gives error

Hi,
I'm trying to compile a code which uses the boost thread library, but I get the following error:
CC -library=stlport4 -features=tmplife -features=tmplrefstatic -mt -c -o t t.cpp
"/opt/boost/include/boost/thread/pthread/mutex.hpp", line 142: Error: The function "pthread_mutex_timedlock" must have a prototype.
"/opt/boost/include/boost/thread/pthread/mutex.hpp", line 142: Error: The function "pthread_mutex_timedlock" must have a prototype.
"/opt/boost/include/boost/thread/detail/thread.hpp", line 344: Error: boost::thread::thread(boost::thread&) is not accessible from boost::move(boost::detail::thread_move_t<boost::thread>).
"/opt/boost/include/boost/thread/pthread/recursive_mutex.hpp", line 179: Error: The function "pthread_mutex_timedlock" must have a prototype.
"/opt/boost/include/boost/thread/pthread/recursive_mutex.hpp", line 179: Error: The function "pthread_mutex_timedlock" must have a prototype.
5 Error(s) detected.
make: *** [t] Error 5the sample source code in question here just a single include:
#include <boost/thread.hpp>This is with boost 1.40.0. I wonder what I'm doing wrong..
Akos

OK, I tried latest version of CC from Sun Studio 12 update 1 and can say that
- the error about constructor not being accessible is Sun C++ compiler "feature" (only called feature because it existed for so long) that allows binding of rvalues to non-const references; this "feature" will probably be turned off in the next release. It can't be changed in a patch because client's code might rely on it.
- the other errors are also not Boost-specific: the result of incompatibility of Linux headers and Sun C++ compiler; more thorough investigation is due, but in the past we had several problems like this. This particular can be solved by adding
-D_GNU_SOURCE to compile line.

C compiler cannot create executables error, Sun Studio 12, snv_69

I am having difficulty compiling a program for R version 2.6.0 from the bioconductor site called RSQLite. I have successfully build R with Sun Studio 12, but now this particular package complains that my C compiler cannot create executables and I have idea how to go about trying to fix this. I don't know if you need to see the 'configure' file to help with this.
The output from the config.log file is:
$ ./configure
## Platform. ##
hostname = me
uname -m = i86pc
uname -r = 5.11
uname -s = SunOS
uname -v = snv_69
/usr/bin/uname -p = i386
/bin/uname -X     = System = SunOS
Node = solenv
Release = 5.11
KernelID = snv_69
Machine = i86pc
BusType = <unknown>
Serial = <unknown>
Users = <unknown>
OEM# = 0
Origin# = 1
NumCPU = 1
/bin/arch              = i86pc
/usr/bin/arch -k       = i86pc
/usr/convex/getsysinfo = unknown
hostinfo               = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown
PATH: /opt/local/bin
PATH: /opt/sfw/bin
PATH: /usr/sfw/bin
PATH: /opt/local/teTeX/bin
PATH: /opt/coolstack/bin
PATH: /usr/sbin
PATH: /opt/local/bin/amd64
PATH: /usr/bin
PATH: /usr/gnu/bin
PATH: /usr/openwin/bin
PATH: /opt/SUNWspro/bin
PATH: /opt/local/php5/bin
PATH: /usr/local/bin
PATH: /usr/ccs/bin
PATH: /usr/local/ActiveTcl/bin
PATH: /opt/staroffice8/program
PATH: /opt/csw/bin
## Core tests. ##
configure:1313: checking for gcc
configure:1339: result: dmake: defaulting to parallel mode.
See the man page dmake(1) for more information on setting up the .dmakerc file.
/opt/studio12/SUNWspro/bin/cc -m64
configure:1583: checking for C compiler version
configure:1586: dmake: defaulting to parallel mode.
See the man page dmake(1) for more information on setting up the .dmakerc file.
/opt/studio12/SUNWspro/bin/cc -m64 --version </dev/null >&5
./configure: line 1587: dmake:: command not found
configure:1589: $? = 127
configure:1591: dmake: defaulting to parallel mode.
See the man page dmake(1) for more information on setting up the .dmakerc file.
/opt/studio12/SUNWspro/bin/cc -m64 -v </dev/null >&5
./configure: line 1592: dmake:: command not found
configure:1594: $? = 127
configure:1596: dmake: defaulting to parallel mode.
See the man page dmake(1) for more information on setting up the .dmakerc file.
/opt/studio12/SUNWspro/bin/cc -m64 -V </dev/null >&5
./configure: line 1597: dmake:: command not found
configure:1599: $? = 127
configure:1622: checking for C compiler default output file name
configure:1625: dmake: defaulting to parallel mode.
See the man page dmake(1) for more information on setting up the .dmakerc file.
/opt/studio12/SUNWspro/bin/cc -m64 dmake: defaulting to parallel mode.
See the man page dmake(1) for more information on setting up the .dmakerc file.
-xO5 -xc99 -xlibmieee -xlibmil -nofstore   conftest.c >&5
./configure: line 1626: dmake:: command not found
configure:1628: $? = 127
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
|   ;
|   return 0;
| }
configure:1667: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_prog_ac_ct_CC='dmake: defaulting to parallel mode.
## Output variables. ##
-xO5 -xc99 -xlibmieee -xlibmil -nofstore'
/opt/studio12/SUNWspro/bin/cc -m64'
/opt/studio12/SUNWspro/bin/cc -m64'
CC='dmake: defaulting to parallel mode.
CFLAGS='dmake: defaulting to parallel mode.
CPP=''
CPPFLAGS=''
DEFS=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EXEEXT=''
LDFLAGS=''
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
OBJEXT=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PKG_CPPFLAGS=''
PKG_LIBS=''
SHELL='/bin/bash'
See the man page dmake(1) for more information on setting up the .dmakerc file.
See the man page dmake(1) for more information on setting up the .dmakerc file.
See the man page dmake(1) for more information on setting up the .dmakerc file.
ac_ct_CC='dmake: defaulting to parallel mode.
bindir='${exec_prefix}/bin'
build_alias=''
datadir='${prefix}/share'
exec_prefix='NONE'
host_alias=''
includedir='${prefix}/include'
infodir='${prefix}/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localstatedir='${prefix}/var'
mandir='${prefix}/man'
oldincludedir='/usr/include'
prefix='NONE'
program_transform_name='s,x,x,'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
#define PACKAGE_BUGREPORT ""
#define PACKAGE_NAME ""
#define PACKAGE_STRING ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
configure: exit 77

Apparently the the config program is running dmake without the -m option. Dmake replies that it is defaulting to parallel mode, and the config program uses that message as a compiler command or option. After that, the wheels come off. :-)
Fix the configure script to run dmake as
dmake -m serial
and see if that fixes the problem.

Sun Studio 12 linker error

Similar Messages

Maybe you are looking for