SunCluster control of Oracle DataGuard databases

I've got two sites in a "Metro SAN" arrangement. I've setup a zone on each site using local storage for Oracle with DataGuard. Both zones must therefore be running at all times, so the zone does not failover but the database does (ie. standby becomes primary). Well, thats my plan
Ive deployed SC3.2u2 (non geographic). Is this able to change the DataGuard role under cluster control?
Ive read that the Geographic edition can do this but we dont have RAC. Can it run without RAC?
If DataGuard proves to be inappropriate, then should I just use mount the database on zpool mirrored shared storage (consisting of one LUN from each site) to achieve my replication? Not very elegant, but it may have to do if I cannot use DataGuard.
thanks

james.patterson wrote:
I've got two sites in a "Metro SAN" arrangement. I've setup a zone on each site using local storage for Oracle with DataGuard. Both zones must therefore be running at all times, so the zone does not failover but the database does (ie. standby becomes primary). Well, thats my plan
Ive deployed SC3.2u2 (non geographic). Is this able to change the DataGuard role under cluster control? The HA-Oracle agent can accommodate Data Guard but it doesn't change the roles. If the database is a standby then it doesn't attempt recover it, it simply mounts it. Thus if you want to have this hybrid arrangement, then you need to construct some sort of mechanism to bring the primary down and make it a standby and then start the standby recovery and bring it online as a primary.
Ive read that the Geographic edition can do this  but we dont have RAC. Can it run without RAC?No. I wrote the module and it was decided that Data Guard broker was the best interface to use to control the Data Guard set-ups. Unfortunately, Data Guard broker does not work with cold fail-over databases because the broker files have embedded host names in them. Although we could work around the host naming issue, Oracle wouldn't support it.
If DataGuard proves to be inappropriate, then should I just use mount the database on zpool mirrored shared storage (consisting of one LUN from each site) to achieve my replication? Not very elegant, but it may have to do if I cannot use DataGuard.If you have a Metro SAN, why use Data Guard in the first place? You seem to be confusing HA with DR. A simple mirrored LUN with one LUN from each site is far simpler, but the performance will depend on the separation. If it is ~ < 20Km, then performance should be OK.
thanksTim
---

Similar Messages

How to configure Oracle Dataguard for Oracle 10g database

Hi Friends,
I would like to configuer Oracle Dataguard for my Oracle 10g Database.
Please provide me the configuration document.(step by step guide)
Regards,
DB

Hi
Go throw below link. This would be help to configure ODG..,
http://blogs.oracle.com/AlejandroVargas/2007/09/data_guard_physical_standby_im.html
http://blogs.oracle.com/AlejandroVargas/2007/10/data_guard_broker_observer_and.html
Thanks,
Mayilselvan.S

Oracle 9i database software upgrade issue with standby (Dataguard) database

All,
I have encountered a problem in upgrading the Oracle software on 2 of our databases in-house. The databases in question here are using Dataguard, so one is set to primary and one is set to standby. The version that they are/were starting at is 9.2.0.7.
I was able to install and complete the 9.2.0.8 and 9.2.0.8 OCT CPU patches on the primary database, however when I moved to working on the standby database, I am got an error when attempting to follow step 6 of the post installation tasks:
Enter the following SQL*Plus commands:
SQL> STARTUP MIGRATE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catpatch.sql
SQL> SPOOL OFF
(Please note that this is my first experience with working with Dataguard, so my methods in updating might have been a bit off-base.)
If I attempt to startup the standby database in MIGRADE mode, I get the following error (which is expected):
ORA-01666: controlfile is for a standby database
If I try to run the catpatch.sql script, even after mounting the database in standby mode, I receive the additional error:
ORA-01219: database not open: queries allowed on fixed tables/views only
My question here is, how do I get the standby database to allow me to finish the software upgrade process, so that both versions of Oracle match on the primary and standby databases? :)
(I did try some research on Metalink, but only found an article detailing how to upgrade your dataguard database from 9i to 10g, which did not look especially helpful in this case...)
Thank you!
-Sabrina

Depending on the kind of Dataguard you currently have, physical or logical, there are two useful metalinks notes:
Upgrading to 10g with a Physical Standby in Place
Doc ID: Note:278521.1
Upgrading to 10g with a Logical Standby in Place
Doc ID: Note:278108.1
~ Madrid
http://hrivera99.blogspot.com/

Oracle 9i Database -- Performance window in Grid Control not data available

Hi
I have Grid Control 10.2.0.4 on Red Hat and i monitoring some Oracle 9i Instances. When i go to any of these instances to the Performance section, at begininig , ever, not data available in all the graphics.
When i select manual refresh the graphic begin to build information. But if i close the explorer and reopen , all graphics not have any information.
Is the situation normal for all Oracle 9i databases?
The explanation is that Oracle 9i not have AWR ?
Thanks

You have too few RAM on your machine, even you could successfully create an instance, it's going to slow as hell.
When you run DBCA to create database, instead of actually creating the database you could choose to dump the SQL scripts and files used for database creation to a directory. This way will give you a chance to modify pfile and reduce the SGA parameter. I believe the default SGA of instance created by DBCA is already beyond your RAM limit.

Oracle 10g Database control installation error

Hi,
Installing oracle 10g database control had give me an error.But Repository created successfully . please find the log file below
Is there i need to install ...? before i start to run emca to install Database Control.
my points of interest are here
FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
i didn't find jms.xml,rmi.xml,http-web-site.xml etc in this location /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/
File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not exist
Let me know how to slove this error.
Thanks,
anil
Error
=========
emca -config dbcontrol db -repos create
STARTED EMCA at Apr 8, 2008 4:33:25 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXX
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /opt/db/oracle/product/10.2.0
Database hostname ................ xxx.xxxx.local
Listener port number ................ 1521
Database SID ................ XXX
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 8, 2008 4:34:55 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Could not complete the configuration. Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
the following is log generated (emca_2008-04-08_04-33-25-PM.log)
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [opt/db/oracle/product/10.2.0]
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /opt/db/oracle/product/10.2.0
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml in searching for tag jms-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1172)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml in searching for tag rmi-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1176)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml in searching for tag web-site
with attribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1180)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/install/staticports.ini
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: /opt/db/oracle/product/10.2.0:mcidm11.pacs11.local:null:SDM:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_SDM value: 3938
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_SDM value: 1158
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_SDM value: 5540
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_SDM value: 5520
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: SDM : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-08_04-34-58-PM.log
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig grantPrivsToDbsnmp
CONFIG: Exception while granting priviliges.
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-00942: table or view does not exist
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.grantPrivsToDbsnmp(EMReposConfig.java:503)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:208)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Failed to grant priviliges to dbsnmp.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.unlockAccounts(EMReposConfig.java:566)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:235)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:239)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)

Hi all,
i started creating database control repository, when i saw emca running i had seen repository created successfully , but sysman user is not created at this point of time. Then i looked into emca_repos_create_2008-04-10_11-57-03-AM.log file but the file is unable to open because it's looking for file emreposcre.sql which creates sysman user in this location /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
i feel while installing the database these files are not created....? or i need to run any scripts before running emca ....?
give me some inputs to this thread.
Thanks,
nil
STARTED EMCA at Apr 10, 2008 11:55:41 AM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXXXX
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 10, 2008 11:57:02 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollog
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 10, 2008 11:57:03 AM
mcidm11 10.2.0/bin>
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-10_11-57-03-AM.log
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
mcidm11 emca/SDM> pwd
/opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM
mcidm11 emca/SDM> more emca_repos_create_2008-04-10_11-57-03-AM.log
SP2-0310: unable to open file "/opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/emreposcre.sql"mcidm11 emca/SDM> cd
Directory: /opt/db
mcidm11 /opt/db> cd /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
Directory: /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql
mcidm11 emdrep/sql> ls
core db ias ocs

Oracle 10g database control

hi,
Working on oracle 10g is just like a mirage for me. I have installed and uninstalled it many times on my new laptop, but not been able to work on it, because of many oracle problems. my OS is windows xp prof. sp2. i have cracked my brain on accessing to oracle 10g database control webpage, but have not succeeded yet. everytime i am successful in installing oracle 10g on my machine but everytime i fail to connect to em-database control and got the error 'page can not be displayed'.
my laptop uses dhcp and it uses a wireless LAN. i install and configure loopback adapter before installing 10g. i have tried with 192.168.x.y as the ip address of the loop back adapter and have put many numbers in place of x, y where 0<x<254 and 0<y<254 . Infact i have tried with 192.168.15.16
192.168.18.12
192.168.78.12
192.168.84.123
192.168.67.102
192.168.20.178
and many more and in all the previous cases i configured subnet mask to be
255.255.255.0. Everytime database installation is successful but not able to connect to oem db control webpage.
One more error i get everytime is that whenever i try to connect to database through sql window , sometimes i connect and sometimes i dont.i get the error ORA-12357 TNS Connection Closed.
i provide username: scott
password : tiger .
host string: orcl
( orcl is the database name and also the name of the sid).
But i always am able to connect to the database through command line c:\ prompt and everything works fine.
Please provide me some solutions for the above problems...

See Response to your other post
its very very urgent, please reply

Oracle 10G Database Control and Scheduling OWB Process Flow

Does anyone know how to go about scheduling an OWB Process Flow from
Oracle 10G Data Base Control. I knew how to do this with Oracle Enterprise Manager 9.2 but we recently upgraded to Oracle Db 10G and the interface has changed significantly.
Now the interface seems to require a PL/SQL stored procedure to be executed.
Is there a template procedure that is installed with 10G Data Base Control as there was for 9.2 i.e. oem_exec_template.sql?
Thanks! Deadline approaching fast...
Marion

I've used the oem_exec_template.sql successfully with OWB 10.1 and Oracle 10G Database Control, with a little trial and error at first.
I'm assuming that your job execution environment is set up correctly, ie. that you can properly execute jobs via the host agent.
1. Log on to Database Control as SYSTEM, select Jobs from the links at the bottom of the page
2. In the Results section, Create Job, select "SQL Script" and press Go
3. In the General section, enter Job Name, and as SQL Script enter e.g.:
@/u01/app/oracle/owb_oracle_home/owb/rtp/sql/oem_exec_template.sql owb_runtime WF_LOC PROCESS MY_PROCESS , ,
4. In the Databases section, add your target database
5. In the Credentials section, I select "Override Preferred Credentials" and use the agent account (oracle on my Linux system) and db user owb_access (OWB Runtime Access user)
6. Review Schedule tab and submit
Comments on step 3:
- the oem_exec_template.sql script must be installed according to the path specified in step 3, on the database host where the OWB Runtime Repository is located
- owb_runtime is the owner of my OWB Runtime Repository
- WF_LOC is the name of my Workflow Location as seen in OWB Deployment Manager
- MY_PROCESS is the name of a deployed Workflow Process
- the commas indicate that I don't supply any system or custom parameters.
- step 3 is actually a shell command line that is interpreted by eg. /bin/sh on Unix or cmd on Windows, and must obey proper quoting rules. On windows, I had to specify the empty commas as "\," (including dblquotes)
Regards, Hans Henrik

Language of Oracle Enterprise Database Control in English

Hi everyone.
When a access then Oracle Enterprise Database Control in a Windows 7 Professional in Portuguese, i see the lenguage of Oracle Enterprise Database Control in Portuguese. How can I change then language of Oracle Enterprise Database Control to English ?
Thanks

Directly Accessing Enterprise Manager in Another Language
http://download.oracle.com/docs/cd/B10501_01/em.920/a96673/appd.htm#624335
check this discussion too. Change language in OEM?

Can Grid control 11g monitor Oracle 9i database

Can Grid control 11g monitor Oracle 9i database? This is on Linux5.7
Thanks for the help
s.

Yes but Enterprise Manager 11.1 Grid Control requires the 11.1 Agent.
Then go to the Targets tab, then Databases. It should self-discover the 9i database.
Also see Advanced Uses of Oracle Enterprise Manager 11g
http://www.oracle.com/us/products/enterprise-manager/advanced-uses-em11g-wp-170683.pdf
>
Oracle Secure Backup protects not only Oracle Database 9i, 10g and 11g,
Grid Control supplies a common, standard interface to set up and manage Oracle Data Guard for Oracle Database 9i, 10g and 11g databases

Enabling Oracle Dataguard modes?

There are 3 modes in which Oracle dataguard works-Maximum Protection, Max availability and Max performance. How do I set any one of these? whats the process?
I have implemented a dataguard standby using manual steps,now I would like to see the GUI tool-Dataguard Broker to manage it..but I did not see it listed in my windows programs under Oracle?How do I start this Broker?
Thanks,
Sandeep

You didn't indicate the version of your database. Assuming it to be oracle10g and if it is so and want to mange the dataguard configuration using GUI, you would be needing Grid Control and agents on primary and standby servers and of course DG broker. This would be accessible over your internet browser and is not associated with any programs/menu items under windows.
HTH
Thanks
Chandra Pabba

How to configure oracle dataguard for connecting to the second nic.

hi
i want deploy my oracle dataguard on a remote site on a separate lease line
and on the second nic of the primary. i just have a concern that what
configurations should be made in the primary or standby to make sure the replication can work as the first nic is connected to receive the general database
data and the second nic is being planned for replication only.
so how standby will come to know that it has to pick which one of then.
waiting for an early reply
manish lall
[email protected]

thanks for the reply
does that mean nothing is to be needed to configure for oracle standby as such.
can you give me some idea of how this ip routing configuration will be done

Restore Oracle XE database to another machine

I have an oracle XE database on a Windows XP machine, and I want to copy it to a Windows 7 machine.
On the XP, I performed a backup through the "Backup Database" from the GUI (BACKUP.BAT). The Oracle backup created 3 new folders underneath C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\
ARCHIVELOG
AUTOBACKUP
BACKUPSET
I installed XE on the Windows 7 machine and it seems to work well.
Then I coped the 3 backup folders onto a jump drive and put them in the corresponding folder structure on the new Windows 7 machine. I ran the Restore from the GUI as an administrator (RESTORE.BAT). The restore failed, and I can't seem to figure out why. I'm not sure what the Sequence Numbers are all about.
Now I can't get into Apex or Apex_Admin
Thanks for taking a look at this.
The contents of the OXE_RESTORE file are as follows:
Recovery Manager: Release 10.2.0.1.0 - Production on Sat Jan 8 18:33:11 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Windows NT Version V6.1
CPU : 8 - type 586, 4 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:6031M/8183M, Ph+PgF:13737M/16364M, VA:1973M/2047M
Starting with debugging turned off
connected to target database: xe (not mounted)
RMAN> set echo on;
2> restore (spfile from autobackup db_recovery_file_dest='C:\oraclexe\app\oracle\flash_recovery_area\');
3> startup nomount force;
4> restore (controlfile from autobackup);
5> alter database mount;
6> configure controlfile autobackup off;
7> restore database;
8>
echo set on
Starting restore at 08-JAN-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=37 devtype=DISK
recovery area destination: C:\oraclexe\app\oracle\flash_recovery_area\
database name (or database unique name) used for search: XE
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2011_01_07\O1_MF_S_739828107_6LHF2W3X_.BKP
channel ORA_DISK_1: SPFILE restore from autobackup complete
Finished restore at 08-JAN-11
Oracle instance started
Total System Global Area 805306368 bytes
Fixed Size 1289996 bytes
Variable Size 239075572 bytes
Database Buffers 562036736 bytes
Redo Buffers 2904064 bytes
Starting restore at 08-JAN-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=36 devtype=DISK
recovery area destination: C:\oraclexe\app\oracle\flash_recovery_area
database name (or database unique name) used for search: XE
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2011_01_07\O1_MF_S_739828107_6LHF2W3X_.BKP
channel ORA_DISK_1: control file restore from autobackup complete
output filename=C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
Finished restore at 08-JAN-11
database mounted
released channel: ORA_DISK_1
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
new RMAN configuration parameters are successfully stored
Starting restore at 08-JAN-11
Starting implicit crosscheck backup at 08-JAN-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=35 devtype=DISK
Crosschecked 1 objects
Finished implicit crosscheck backup at 08-JAN-11
Starting implicit crosscheck copy at 08-JAN-11
using channel ORA_DISK_1
Finished implicit crosscheck copy at 08-JAN-11
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_01_07\O1_MF_1_375_6LHF31CQ_.ARC
File Name: C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_01_07\O1_MF_1_376_6LHF3DCQ_.ARC
File Name: C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2011_01_07\O1_MF_S_739828107_6LHF2W3X_.BKP
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to C:\ORACLEXE\ORADATA\XE\SYSTEM.DBF
restoring datafile 00002 to C:\ORACLEXE\ORADATA\XE\UNDO.DBF
restoring datafile 00003 to C:\ORACLEXE\ORADATA\XE\SYSAUX.DBF
restoring datafile 00004 to C:\ORACLEXE\ORADATA\XE\USERS.DBF
restoring datafile 00005 to C:\ORACLEXE\ORADATA\XE\APEX_1244616068553754.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\BACKUPSET\2011_01_07\O1_MF_NNNDF_TAG20110107T194642_6LHDZM3X_.BKP
channel ORA_DISK_1: restored backup piece 1
piece handle=C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\BACKUPSET\2011_01_07\O1_MF_NNNDF_TAG20110107T194642_6LHDZM3X_.BKP tag=TAG20110107T194642
channel ORA_DISK_1: restore complete, elapsed time: 00:00:56
Finished restore at 08-JAN-11
Recovery Manager complete.
Recovery Manager: Release 10.2.0.1.0 - Production on Sat Jan 8 18:34:37 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Windows NT Version V6.1
CPU : 8 - type 586, 4 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:6021M/8183M, Ph+PgF:13238M/16364M, VA:1973M/2047M
Starting with debugging turned off
connected to target database: XE (DBID=2604800077, not open)
RMAN> set echo on;
2> recover database;
3> alter database open resetlogs;
4>
echo set on
Starting recover at 08-JAN-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=38 devtype=DISK
starting media recovery
archive log thread 1 sequence 375 is already on disk as file C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_01_07\O1_MF_1_375_6LHF31CQ_.ARC
archive log thread 1 sequence 376 is already on disk as file C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_01_07\O1_MF_1_376_6LHF3DCQ_.ARC
archive log filename=C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_01_07\O1_MF_1_375_6LHF31CQ_.ARC thread=1 sequence=375
archive log filename=C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2011_01_07\O1_MF_1_376_6LHF3DCQ_.ARC thread=1 sequence=376
unable to find archive log
archive log thread=1 sequence=377
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 01/08/2011 18:34:47
RMAN-20000: abnormal termination of job step
RMAN-06054: media recovery requesting unknown log: thread 1 seq 377 lowscn 11715842
Recovery Manager complete.

After playing around a little bit I fixed the problem.
There are a total of four folders in \FLASH_RECOVERY_AREA\XE\ I had only copied three of the four.
ARCHIVELOG
AUTOBACKUP
BACKUPSET
The Windows services keep the files in ONLINELOG open, so I had to shut down the services and then work with the folder. Therefore four folders have to be transported and copied onto the new machine:
ARCHIVELOG
AUTOBACKUP
BACKUPSET
ONLINELOG
If you run as an administrator "Backup" from the GUI, it executes BACKUP.BAT, a batch file which calls RMAN. Once that's done, copy the four folders to the same location on the target machine and then run as an administrator "Restore" (RESTORE.BAT).
In another forum someone said to be sure that the "Archive Logs" are copied. It should be interpreted to mean not just the "ARCHIVELOG" folder, but all four folders.
Edited by: PhilMan2 on Jan 11, 2011 11:28 AM

Installation of Oracle 10g Database on Windows Vista Home Basic

Hi All,
I'm confused about the possibility of installing Oracle 10g Database Server in Windows Home Basic Operating System with Service Pack 1. Please help me out with a confirmation.
Thanks in advance
Prasanth

Hi Prasanth
Yes that should be possible but is it a production database or just a test database.
you can always control that in metalink if it is supported, I don't believe it is.
Read that documentation to perform the installation.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm

Oracle 8i database data recover problem

Hi hi,
I've recently encountered a problem on how to restoring data from old oracle folders to a new oracle 8i database.
Originally, my oracle 8i was installed in windows 2000 server on a harddisk (J:\oracle old) separated from that the OS (windows 2000 server) resided. Recently, the harddisk with the OS has been permanantly demaged and I've installed windows 2000 server on a new harddisk (C:\winnt), reinstalled the oracle database (J:\oracle).
However, is there any way to recover the data from an instance of the original database to the newly created database.
I will be grateful for any suggestion? Thanks a lot.

CREATE CONTROLFILE
Caution:
Oracle recommends that you perform a full backup of all files in the database before using this statement. For more information, see Oracle9i User-Managed Backup and Recovery Guide.
Purpose
Use the CREATE CONTROLFILE statement to re-create a control file in one of the following cases:
All copies of your existing control files have been lost through media failure.
You want to change the name of the database.
You want to change the maximum number of redo log file groups, redo log file members, archived redo log files, datafiles, or instances that can concurrently have the database mounted and open.
Note:
If it is necessary to use the CREATE CONTROLFILE statement, do not include in the DATAFILE clause any datafiles in temporary or read-only tablespaces. You can add these types of files to the database later.
An alternative to the CREATE CONTROLFILE statement is ALTER DATABASE BACKUP CONTROLFILE TO TRACE, which generates a SQL script in the trace file to re-create the controlfile. If your database contains any read-only or temporary tablespaces, that SQL script will also contain all the necessary SQL statements to add those files back into the database.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_54a.htm#SQLRF01203
Joel P�rez

Is it possible to install Oracle 10g database on a linux Os ?

Hello all,
I recently installed Fedora 14, and oracle 10g free edition, on my modest laptop.
Problem is , I can't upload any scripts, because as i recently learnt from my school teacher, Oracle only works smoothly with Internet explorer browser (i.e.).
I tried using programs like winetricks to download a linux version of i.e. but in this case Oracle doesn't even open its homepage.
-In a nutshell, does anyone know a possible way to work with oracle 10g , (or any alternative), that's fully functional on linux (fedora 14) ? Download, Install steps,etc.
All i need to do is upload simple SQL scripts, and practice my " select from...." commands.
-Is oracle linux a option ? and what is it?
Thank you already for any replies, I'm really getting tired of googling threw different forums.

865504 wrote:
Ed,
-i knew my teacher was being stubborn;
-I meant that the winetricks version of i.e., didn't open the homepage of oracle 10g (=log in screen).
-what i was trying to do was, after having installed oracle 10g , "go to data base homepage" (openend by firefox) , once logged in with my username, upload a script , and practice typing the different (select from ...group by..etc) sql commands.
Here is one of several concepts you need to fix in your mind. Databases don't have home pages. Client applications do. Databases store and manage data. Humans at the keyboard see the client application, not the database. Oracle provides some client apps ( iSQLPlus, Oracle Enterprise Manager (Grid Control), dbcontrol, APEX) and even installs some with the database by default, but they are distinctly separate from the database, and so must be identified when talking about user interface issues. Unfortunately, telling us you tried to open "the home page of oracle" tells us nothing at all. If you had said "Tried to log in with iSQLPlus" or "I tried to connect with Apex", it would have conveyed MUCH more information. We would have then had some frame of reference as to what you were seeing.
To the "upload from where" question : I simply copied the scripts ( .sql , file) from the pc's from school, on usb, then copied them on my own system. When using the "upload scripts" option from oracle, Again, you must distinguish between "oracle" (the database) and whatever client tool you use to connect to it. "Oracle" (the database) doesn't have an "upload scripts" option. Some un-named application does.
the script is uploaded, but when i try to "run" it , nothing , blank page. no tables, nada. And given what I've said above, you can guess what this statement means. - grin -
My first guess was, well the teacher said " i.e. only " , so i tried installing i.e. , using winetricks, but i had a feeling i was going off-track, and that surely there must have been a much easier way.
Even Billy was more charitable toward your teacher than I feel. And when he is so wrong about something as simple as this, makes me wonder what else he is wrong about. And the quality of the teachers calls into question the quality of the school in general.
In fact, had I been told that by an instructor, I would make it a personal mission to prove him wrong. Not in front of the class (as much short term satisfaction as that may provide) but just by taking my laptop to his office and saying "let me show you something". One of my personal hot buttons is for someone who should know better to pronounce something as "won't work" when I've been doing it for so long and so easily as to just take it for granted.
>
Linux (fedora 14) is up and running,
oracle 10g , linux version, was installed using detailed guide.
And yes, i will look into oracle linux, and oracle 11g ,
but i was hoping to use the same version as my school, to avoid any surprises when passing my exams.Edited by: EdStevens on Jun 13, 2011 3:02 PM

SunCluster control of Oracle DataGuard databases

Similar Messages

Maybe you are looking for