Enabling Oracle Dataguard modes?

There are 3 modes in which Oracle dataguard works-Maximum Protection, Max availability and Max performance. How do I set any one of these? whats the process?
I have implemented a dataguard standby using manual steps,now I would like to see the GUI tool-Dataguard Broker to manage it..but I did not see it listed in my windows programs under Oracle?How do I start this Broker?
Thanks,
Sandeep

You didn't indicate the version of your database. Assuming it to be oracle10g and if it is so and want to mange the dataguard configuration using GUI, you would be needing Grid Control and agents on primary and standby servers and of course DG broker. This would be accessible over your internet browser and is not associated with any programs/menu items under windows.
HTH
Thanks
Chandra Pabba

Similar Messages

Oracle Dataguard Help

I am trying to setup oracle dataguard(10g) in logical standby mode and i'm getting this error.
Could anyone please help me with this
SQL> alter database create logical standby controlfile
2 AS 'D:\oradata\PRIMARYDB\STANDYCTL.ctl';
alter database create logical standby controlfile
ERROR at line 1:
ORA-06550: line 1, column 36:
PLS-00201: identifier 'DBMS_LOGMNR_D.STORE_IN_REDO_LOGS' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored

when i am trying at the standby server to get into managed recovery mode i am getting this error. Any ideas why??
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE;
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
ERROR at line 1:
ORA-00283: recovery session canceled due to errors
ORA-01110: data file 1: 'D:\ORADATA\STANDBY\SYSTEM01.DBF'
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'D:\ORADATA\STANDBY\SYSTEM01.DBF'
The trace file doesn't mention much about the error except:
The process cannot access the file because it is being used by another process.
Message was edited by:
user636794

Enabling the Debug Mode

Hello!
I can't enable the debug mode as descibed here http://help.sap.com/saphelp_nwce10/helpdata/en/45/e4fa02855c2e97e10000000a155369/frameset.htm.
There isn't "Start Debug Session..." in the context menu.
How can I enable the debug mode on the fly?
Regards,
Armin

Your probably missing the oracle debug privileges then. I can never remember them off hand but its something like debug any procedure and connect any session that are needed

How to configure oracle dataguard for connecting to the second nic.

hi
i want deploy my oracle dataguard on a remote site on a separate lease line
and on the second nic of the primary. i just have a concern that what
configurations should be made in the primary or standby to make sure the replication can work as the first nic is connected to receive the general database
data and the second nic is being planned for replication only.
so how standby will come to know that it has to pick which one of then.
waiting for an early reply
manish lall
[email protected]

thanks for the reply
does that mean nothing is to be needed to configure for oracle standby as such.
can you give me some idea of how this ip routing configuration will be done

How to configure Oracle Dataguard for Oracle 10g database

Hi Friends,
I would like to configuer Oracle Dataguard for my Oracle 10g Database.
Please provide me the configuration document.(step by step guide)
Regards,
DB

Hi
Go throw below link. This would be help to configure ODG..,
http://blogs.oracle.com/AlejandroVargas/2007/09/data_guard_physical_standby_im.html
http://blogs.oracle.com/AlejandroVargas/2007/10/data_guard_broker_observer_and.html
Thanks,
Mayilselvan.S

ABAP+JAVA stack and oracle dataguard

Hi all,
I use Oracle Dataguard for my Data recovery System.
How can I manage tha Java part of nw2004s. In case of failover or switchover, the ABAP part is OK but the J2EE cannot start.
Thank's for your help,
Regards
Oracle 10.2.0.2 on Windows 2003 x64 R2

It's ok guys. I just replace the j2ee/cluster directory of standby system by the one of source system.
The j2e engine can be started.

How to enable single window mode?

*how to enable single window mode in the latest version of Safari?*
browser opens up some links in new windows and it is very inconvenient
Message was edited by: wolfxr

All that you describe is the standard setting them I have long found, but they do not bring any results. What is interesting - parameter "TargetedClicksCreateTabs" in a state of "true" which is processed in the Mac version, broken in the Windows-based version if it is to register the file C: \ Program Files \ Safari \ Safari.resources \ Defaults.plist a file stored in the folder C: \ Documents and Settings \ Admin \ Application Data \ Apple Computer \ Preferences \ com.apple.Safari.plist scrambled to change it theoretically impossible, but if you replace it with THIS file, then it can be set, but the parameter "TargetedClicksCreateTabs" still not working

How to enable 640x80 video mode on Satego P200?

Hello all,
for an old game I need the video mode 640x480x8. Unfortunately I can't select the video mode using Catalyst for the Satego P200 with an ATI Mobility Radeon HD 2600. Is there a way to enable this video mode?
Michael

The game is Starcraft and its' addon Broodwar. As version 2 is in the works and some friends and I played it very often in former times we started playing it again. Kind of veteran meeting but quite fun. :)
There are not many posts about it but there seems to be a problem related to s-video output when using 640x480. I am quite sure the graphics adapter, the display and the driver are able to support this mode. So I hope there's maybe neat trick to change some *.inf file or something similar to reactivate the mode.

Here is how to enable full screen mode for AIR Mac Desktop Apps

I just discovered that with a very simple native extension method, I can enable full screen mode for AIR Mac Desktop Applications.
This gets you the full screen icon in the top right, and it works perfectly with no changes to my code. (Obviously only works on Lion and above, since this is a Lion feature)
Enjoy.
Here's the code:
    FREObject _EnableFullScreenMode(FREContext ctx, void* functionData, uint32_t argc, FREObject argv[])
        //We should be okay to do this, even on 10.6, according to this post:
        //http://www.cocoabuilder.com/archive/cocoa/311124-implementing-full-screen-for-10-7-but-app-should-also-run-on-10-6.html
        //We can't use [NSApp mainWindow] - didn't appear to work
        //This seems to though:
        NSArray * allWindows = [NSApp windows];
        if (allWindows.count > 0)
            NSWindow *mainWindow = [allWindows objectAtIndex: 0];
            NSWindowCollectionBehavior behavior = [mainWindow collectionBehavior];
            behavior |= NSWindowCollectionBehaviorFullScreenPrimary;
            [mainWindow setCollectionBehavior:behavior];
        //TODO: Return a boolean instead depending on if we found the main window
        return NULL;

Press Control + Command + F on your keyboard to enter or exit full screen mode.

How to enable full screen mode by default?

How do I enable full screen mode in apps by default?

There is no mechanism in the OS for that.
Some apps will reopen the mode you left them.
charlie

Enabling Oracle Label Security on 9.2.0.7 database

Hi there,
I have installed the option Oracle Label Security and patched it to 9.2.0.7. I have then run the script $ORAHOME\rdbms\admin\catols.sql . Which re-starts the database.
But when I run the below example I get the below error.
SQL> CONNECT lbacsys/lbacsys
Connected.
SQL> EXECUTE SA_SYSDBA.CREATE_POLICY( -
'FACILITY','FACLAB','READ_CONTROL,CHECK_CONTROL,LABEL_DEFAULT,HIDE');
BEGIN SA_SYSDBA.CREATE_POLICY( 'FACILITY','FACLAB','READ_CONTROL,CHECK_CONTROL,LABEL_DEFAULT,HIDE'); END;
ERROR at line 1:
ORA-00439: feature not enabled: Oracle Label Security
ORA-06512: at "LBACSYS.LBAC_SYSDBA", line 107
ORA-06512: at "LBACSYS.SA_SYSDBA", line 43
ORA-06512: at line 1
I have also noticed that in the v$option view shows the
PARAMETER VALUE
Oracle Label Security FALSE
I have compared the number of objects to metalink article 171155.1 How to Install / Deinstall Oracle Label Security and all the objects seem to be in the schema.
Also I check the version and saw below.
SQL> conn dba/
Connected.
SQL> COL comp_name FORMAT A32
SQL> COL version FORMAT A16
SQL> SELECT
2 comp_id
3 ,comp_name
4 ,version
5 FROM dba_registry
6 where comp_id='OLS';
COMP_ID COMP_NAME VERSION
OLS Oracle Label Security 9.2.0.7.0
1 rows selected.
SQL>
Anyone know how I can enable Oracle Label Security is that it works?
TIA
Ed

I still have some old 9.2.0.8 databases running on both HP-UX and AIX and have clients on 10.2g which doesn't manifest any problem .

Enable the Debug mode for Dispatcher and Server0.

Hello All,
In our EP server 7.0(stand alone java) apart from SDM we need to enable the Debug mode for Dispatcher and Server0.I tried to do it from mmc but cannot do so.When I try to right click & enable from mmc the "Enable Process" is not highlited,it is disabled.How Can I enable the the Debug mode for Dispatcher and Server0?

Hi
Goto Configtool Select Instance_IDxxxxx on the right side you can see "Servers Debug" tab, select that and choose, enable debug and debuggable options.
Save the settings.
Then expand the above mentioned node and select Server_IDxxxxxxx , you will see a tab Debug select it and choose, enable debug and debuggable options.
Save the settings.
After it is done, take a restart of the instance. This should help you.
Regards
Rahul

Enable Oracle XA Transaction Support

Hi everybody. First of all, sorry for my terrible English.
I've been some problems using COM+ with Personal Oracle 8i (8.1.7.0.0) and SQL Server 2000 and Windows 2000 for development only.
I have one method that inserts the same data both SQL Server and Oracle (the tables and procedures definitions are identical) and I'm utilizing GetObjectContext method to commit or abort the transactions (the COM component were made in VB). Out of COM+ environment the method works 5x5. The error message is: "-2147168229 - Cannot connect to the transaction manager or the transaction manager is unavailable."
Checking Microsoft documentation I found an article (http://support.microsoft.com/support/complus/mtsandoracle.asp) telling me to "Enable Oracle XA Transaction Support" so I could have transactional work with Oracle and COM+. OK, just fine.
Does anyone knows how could I manage it? I am not a DBA nor I know one (an Oracle DBA), but I shall explain to my team how program 2 phase commit between Oracle and SQL Server.
Thanks in advance, and forgive me the size of this "book". I should be shorter next time...
null

Vivek, thanks for the help.
I am utilizing these versions of Oracle Products:
Personal Oracle8i Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Net8 Client 8.1.7.0.0
Oracle Services for MTS 8.1.7.0.0
Oracle Provider for OLE DB 8.1.7.2.0
The provider I first tried was MSDAORA with no success and then ORAOLEDB with no success too.
But those entries in registry that you sent me were all with Microsoft dll`s. I will try again tomorrow and send you the results
Thank you again
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Vivek Raja:
Renato, firstly what is the interface you use to access Oracle from your COM+ components? If it is OLEDB which provider is in use - MSDAORA or ORAOLEDB? What are the versions in use 8.1.6 or 8.1.7? If you are using MSDAORA as the provider then you will need to add the following key to your registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTC\MTxOCI.
Under this key add the following registry string values:
OracleOCILib - oraclient8.dll
OracleXALib - oraclient8.dll
OracleSQLLib - orasql8.dll
If you are using ORAOLEDB as the provider install Oracle Services For MTS 8.1.7. The error you receive seems to point to the fact that the "Distributed Transaction Coordinator" Windows2000 Service is not running.<HR></BLOCKQUOTE>
null

ORACLE DATAGUARD and STANDBY on two LINUX machine (64 bits and 32 bits)

Hi there
I have two Linux machines: one with Linux RH 4 Update 2 for 64 bits and
the other one with Linux RH 4 Update 2 for 32 bits.
I was wondering two things:
1) Is it possible to implement ORACLE DATAGUARD between these two machines?
2) Is it possible to implement only a Static Standby Database on the second node?
Suppose we have Oracle Database EE on both machines.
Thanks in advance for any information
Regards
Felipe

But both oracle database version must be of 32 bit version.
from oracle doc
2.3.1 Hardware and Operating System Requirements
The following list describes hardware and operating system requirements for using Data Guard:
All members of a Data Guard configuration must run an Oracle image that is built for the same platform.
For example, this means a Data Guard configuration with a primary database on a 32-bit Linux on Intel system can have a standby database that is configured on a 32-bit Linux on Intel system. However, a primary database on a 64-bit HP-UX system can also be configured with a standby database on a 32-bit HP-UX system, as long as both servers are running 32-bit images.

Oracle DataGuard Logical Standby

Hi , I'd like to know what are the premisses to make a standby logical replication.
I have two environments (production and standby) with different number of processors and storage.
I'd like to know if it's possible to create data guard solution with these two environments and what are the premisses that I need aware to install the solution.
Thanks in advance.

Hello;
Yes the storage ( as long as you have enough space ) and cpu don't matter.
You can use hardware that's quite a bit different and it will work fine.
You can also create a Logical Standby fro a physical standby.
These notes may help :
NOTE 413484.1 - Data Guard Support for Heterogeneous Primary and Physical Standbys in Same Data Guard Configuration
Mixed Oracle Version support with Data Guard Redo Transport Services [ID 785347.1]
Logical Standby's don't seem to be very popular and the support base suffers because of this. I would consider a physical standby with Active Data Guard if costs allow.
Active Data Guard makes an excellent "Reader" database plus I believe your switchover and failover options are much better than a Logical Standby.
Oracle DataGuard Logical Standby Setup :
http://orajourn.blogspot.com/2007/02/setting-up-logical-standby-database.html
http://garyzhu.net/notes/DataGuard.html
Best Regards
mseberg
Edited by: mseberg on Apr 25, 2012 10:07 AM

Enabling Oracle Dataguard modes?

Similar Messages

Maybe you are looking for