SUP720 load specific config to startup during rommon

Hello Freinds,
Wendering if there is any tips to load specific file configuration(from disk0) to startup during rommon load, we need this to avoid "double" reload
when replacing new RMA SUP720, this will help to load correct config prior IOS loading without need to copy from file to startup config or
erease startup and copy the correct config while IOS already loaded thus, second reload is required.
any tips will be appreicated.
Mohamed.

Hello Reza,
Thanks alot for your support, thus twice reload is required :-(
Mohamed.

Similar Messages

How to load a config file at appliaction startup

Hi
Is there a way to load a config file at application startup?
I have the DB conection info in a config file.
Right now m accessing that info by loading it using a classloader n then parsing it.
When ever i access the DB this file is loaded n parsed.
I want it to be loaded only once at startup n get cached.
Then later on whenever i refer it, i shud get the cached copy.
Is there a way to do this?

Or you could just include a relevant static block.
For instance you could have a utility class for accessing your DB in which you wrap jdbc code for querying, updating etc. This class would have code like the following:
public class DBBean {
   private static DataSource ds = null;
   static {
      loadDataSource();
   public static loadDataSource() {
      // load your property file with the configuration info and setup your datasource
   public static void doSomething() {
      Connection con = ds.getConnection();
}By placing initialization code in a public (?) method you can call this method to re-initialize your DataSource if e.g. you updated your datasource settings.
Hope this helps

How to load a config from one appliance and publish it to both

Hi,
We're using AsyncOS7.5 on two WebAppliances S360 with a
Configuration Master 7.5 (M160).
I used one of both appliances to implement URL Filtering and now I'd like to transfer
this coniguration to the the master in order to publish it to both appliances.
As I could see it doesn't appear to be possible to load the config from one
specific appliance.
How can I do that the best?
Any hints?
Thanks
Jannis

Jannis,
You can import the config file from the WSA which URL filtering has been configured to the M160 in Configuration Master 7.5. This will wipe out the current configuration master 7.5 stored in the M160, and you can then publish the same config to the other WSA.
Check the online help for section "Initializing and Importing Configuration Masters"
Hope this helps.
- donny

HT204406 Is there a way to down load specific, individual songs on my iphone 5 or ipad 2, through iTunes Match, rather than having to download the entire album in the Cloud?

Is there a way to down load specific, individual songs on my iphone 5 or ipad 2, through iTunes Match, rather than having to download the entire album in the Cloud?

Begin by tapping on the Settings app.
Scroll to the Store menu and tap that.
This is where you can manage your Automatic Download settings. You can control Music, Apps, and Books (if you have the iBooks app installed) here. Slide to On any of the kinds of files you want iCloud to automatically download to your device.

What's wrong? Verify and compare Cisco 2901 config after loading old config from Cisco 2801

Hi Cisco Community / Friends,
I am new to this site though I have cisco account for many years. I am a CCNA ,I passed my certification on January 2013 I seldom use and utilized my skills on networking becuase of my type of work. I am Project Eng'r working in a System integrator company . Anyway, I would like to ask assistance on the configurations of my Cisco router for this gov't projects.. Here's the situation.
We have a new project for the VSAT Comm'n of Coast Watch Station , The VSAT was installed 7 years ago. The VSAT was only used for a year by this Gov't agency because of subscription issue. Now, they wants to revive and use their VSAT facilities for the Coast watch monitoring. Now, some of this routers are working up to now and for some site are already defective so I need to replace the old 2801 router with a new equivalent model which is Cisco 2901. My plan was just to load the old config into the new Cisco 2901 router. However, after loading it to the new router, I am a little worried because I've got some errors received. I load the old config by copying the old files, edit it in notepad, and load the config using Secure CRT (terminal emulator). When I copy the old config of cisco 2801 to new router cisco 2901 , below are the command not recognized on Cisco 2901. What's wrong ? What are these commands for?
Appreciate your comments and help on this matter.. Thank You very much
Note: I Attached the original config from Cisco 2801 and the other file is the config after I load the config file to Cisco 2901.
(Errors see below)
CWS_4_Pandami(config-erm)#mmi polling-interval 60
                         ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#no mmi auto-configure
                               ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#no mmi pvc
                               ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#mmi snmp-timeout 180
                                                        ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-if)#interface GigabitEthernet0/1
CWS_4_Pandami(config-if)# description ===CWS4 SAT Modem===
CWS_4_Pandami(config-if)# bandwidth 256
CWS_4_Pandami(config-if)# ip address 192.168.42.1 255.255.255.0
CWS_4_Pandami(config-if)# duplex auto
CWS_4_Pandami(config-if)# speed auto
CWS_4_Pandami(config-if)# priority-group 1
                                                    ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config)#access-list 100 permit ip any any dscp cs5
CWS_4_Pandami(config)#priority-list 1 protocol ip high list 100
                          ^
% Invalid input detected at '^' marker.

Hi
From Cisco's website:
The Modem Management Interface (MMI) is software that enables auto-provisioning for the Cisco 827 routers. The MMI uses a fixed PVC to communicate with the Proxy Element (PE) residing on the digital subscriber line access multiplexer (DSLAM). Using MMI, the Cisco 827 router updates the running image and downloads the prescribed configuration using a configuration file or configuration values in a provisioning information database.
The customer premise equipment (CPE) can be automatically configured using the Cisco DSL CPE download, but it can be configured only with the image provisioning feature.
So because this is your device, you don't want to use MMI anyways.
And "priority-list" is QoS. Probably that QoS-command is old and removed, because now QoS is configured using class-maps and policy-maps.

[bug-report] AI CC for Mac got "loading plugin error" at startup

Enviornment: 2012 late Mac Mini, OSX 10.8.6( English )
Just fresh installed adobe illustrator cc for Mac(Simplified Chinese), which is got "loading plugin error" at startup, even update AI or reinstall it after using adobe cc clean tool.
Finally I found it will be solved by selecting default lanugauge (North America English) at installer. Then I changed my OSX language to S Chinese then installed S_Chinese version AI CC that works without problem.
So, it shows AI got some language compatiabitily bug which is not happen on PS and InDesign (I installed Simplified Chinese version of both them on my english OSX without error)
Plz fix it in next version. Thanks so much.

Can you give this a try, that is try using a seperate boss?
DECLARE_PMID(kClassIDSpace, kIDCStartupShutdownServiceBoss, kIDCPrefix + 10)
Class
                    kIDCStartupShutdownServiceBoss,
                    kInvalidClass,
                              // Implementation of IStartupShutdownService
                              IID_ISTARTUPSHUTDOWN, kIDCStartupShutdownImpl,
                              // Implementation to IK2ServiceProvider to identify the service type as startup-shutdown
                              IID_IK2SERVICEPROVIDER, kLazyStartupShutdownProviderImpl,

Launch a specific file on startup

Hello everyone,
Is there a way to automatically launch a specific file on startup?
I would like to have an image pop up on my wife's computer when she logs in in the morning. Is this possible? Is there an app to automate this sort of thing? I've looked into the Login Items, but as far as I know it only allows one to launch apps, not specific files.
Thank you so much for your help
Best,
Rui

Hi there,
Thank you for your help. I just found the answer in another post, and you can actually fo it from the Login Items section. Simply click the + sign, select the file to open and voilá
Cheers!

Why is Firefox not loading my pages at startup anymore?

FF 12.0. Why now all of a sudden is FF not loading my pages at startup. It loads the "pinned" pages, but NONE of the other ones I had open. This is happening at every FF startup now. Really, this was the ONLY feature that was keeping me with FF. The performance has gone dramatically down, and the problems more frequent ever since 4 was released. I am getting to the end of my rope with this now. Any ideas?

No previous session option, it is grayed out.
I did try the file exit way to close, and it brought the tabs back up. Is that a change in 12? Not good, we don't always or even often get the chance to close down like that. It was never like that in the past. It did not matter if you hit the X, or ended the process in the task manager... the tabs ALWAYS came back up. It was a feature that nobody else had working in that matter at the time. Honestly, it is the only reason I have been using FF on a regular basis for the past couple of years. Now I have to worry about losing my tabs when it is not closed down "properly", or spend a hour looking through the history and trying to figure out what I had open.

SQL* Loader Loading specific column from CSV file to the table

Dear All,
Iam Loading specific column from .CSV file to the oracle table.
Could pls help how i can load only that cols into the table
Eg: CSV file having id, Frst_name,Last_name, Address,Phone,Insurance etc
out of this I want to load only Frst_name,Last_name columns to oracle table say fname and lname.
Thanks in Adv.
Junu

Lily,
I made some changes to your table def but you will get the idea
-- Table EMPLOYEE
CREATE TABLE EMPLOYEE
EMPID        NUMBER                           NOT NULL,
EMPNICKNAME VARCHAR2(10 BYTE)                    NULL,
FNAME        VARCHAR2(20 BYTE)                NOT NULL,
MI           VARCHAR2(20 BYTE)                    NULL,
LNAME        VARCHAR2(20 BYTE)                NOT NULL,
FULLNAME     VARCHAR2(20 BYTE)                NOT NULL,
HIREDATE     DATE                             DEFAULT SYSDATE               NOT NULL
-- data file employee.dat
1,amy,b,amy b
2,cindy,d,cindy d
3,eric,f,eric f
4,gary,h,gary
-- Control file : Employee.ctl ( you can use truncate, replace or append , see sqlldr for more options)
load data
Truncate into table employee
fields terminated by ","
optionally enclosed by '"'
TRAILING NULLCOLS
empId INTEGER EXTERNAL,
FName char(20),
LName char(20),
FullName char(30)
now to load use following or you can speicify infile in control fle
sqlldr username/passowrd control=employee.ctl data=employee.dat log=employee.log
{code}
Hope this help.
Regards

Issue in loading specific columns from a file to teradata table using IKM

Hi,
Can any one help to resolve the issue in loading specific columns from text file to teradata table.
i tried using IKM file teradata and columns are getting displaced.
my requirement suppose i have 5 columns in file and i have to load only 3columns to table using IKM.
same thing can be achived using LKM file to teradata but i want use IKM.
please suggest me on this
Regards
Vinod

Hi,
I believe that the problem you are having is that you have a delimited file, of which you want to pick columns from position 2,3,5. In this case, ODI will pick the first 3 columns of a delimited file regardless of position.
For example, if you a tab delimited file with c1,c2,c3,c4,c5 columns, and you want only columns c2,c3,c5 - when mapping these in an ODI interface, and executing, you will actually pick up the data from c1,c2,c3 as these are the first three columns in the file (reading from left to right). You can ignore "columns" on the right hand side of a file, but not the left. E.g delimited file with c1,c2,c3,c4,c5. Only pick columns c1,c2 will give you data for the first 2 columns
Create a temporary table to load all the data from the file, and use you temp table to extract the data you require. Or you could get the file created with the first three columns as the columns you require.
Cheers
Bos
Edited by: Bos on Jan 18, 2011 1:06 PM

Firefox is not loading specific websites for me. Sites like Facebook, Ebay, Google, and Netflix refuse to open, or even acknowledge me pressing the Enter key

Firefox is not loading specific websites for me. Sites like Facebook, Ebay, Google, and Netflix refuse to open, or even acknowledge me pressing the Enter key when I type in the address or click a link to that site. Practically every other site works perfectly fine. I did not change any settings or download any new addons prior to this problem, it just started happening. I have done everything I can find in the forums; resetting firefox, clearing cache and cookies, making network settings use no proxy, reinstalling, and today I uninstalled Firefox, updated and scanned my computer with all 3 software I use (AVG, Malwarebytes, and Spybot), found no issues, restarted my computer, and reinstalled a freshly downloaded Firefox setup without importing any settings or doing anything other than a totally clean install, and still nothing. Chrome and IE still are able to access every site perfectly fine. I have no idea what the issue is or how to fix it, as I've tried everything I know and could research.

Hi There,
Sorry to hear of your issue. I found a great article for you to read and explain how to fix your issue. I hope this hope :)
Robert
Click on the link below
[[https://support.mozilla.org/en-US/kb/firefox-and-other-browsers-cant-load-websites ]]

"unable to load main bundle" come up during Adobe Reader update on Windows server 2003

"unable to load main bundle" come up during Adobe Reader update on Windows server 2003

Try using the offline installer from http://get.adobe.com/reader/enterprise/

PROBLEM: loading jaas.config in the web application

Hi,
my problem was load jaas.config in the web application, the way that I suppose was best it's to load a configuration file in the web.xml of my application, but I they are not a veteran of xml and I have a problem of implementation for this solution.
I hope you know a solution of my problem because I was deprived of hope!
HELP ME PLEASE!

Hi,
I hope that replay me on my new quesion.
I have find a class "Configuration" that load a configuration file of jaas, but I don't understand how use it. Because I want pass it to LoginModule in the costructor.
Can you help me with an example code?
Thanks

Cisco LMS netconfig job not saving running config to startup

Hi,
I'm running LMS3.2 and RME 4.3.1. I deployed a netconfig job to our network which consisted of approximately 800 devices.
The report said that the job completed successfully however some of the devices didn't save thier running config to startup. Has anyone experienced this before?
Is it possible to add a command or issue another netconfig job just to save the running config, so I can identify if the job fails on some devices? Using the tick box in the netconfig job doesn't seem to alert you if its not successful.
Thanks,

I have seen in the past where someone is running a netconfig job with the cmd to "wr mem" as a line in the netconfig job.
Sven is correct, there is an option; radio button/check box to save the running config to startup after the job is completed.
if your job is strictly meant to "wr mem/write the config" then run a show command in config mode (non-enable) mode and select the option to save running config after job is completed.

Running config vs startup

Hi.
Smb can answer - how i can replace running config on startup config comlpitly? withou reload cisco. I can't use copy startup runnig config - it is not correct.
Snks.

Yuri
I understand what you are asking is the ability to do a complete replacement of the running config with the content of the startup config. Unfortunately the only way to do that is to reload. The architecture of IOS does not allow a complete replacement while it is running.
Perhaps it will be helpful to understand that the behavior of copy is different depending on which direction it is copying. If you are copying from running to startup then it is a complete replacement. But if you are copying from startup to running then it is not a complete replacement but is an overlay. And you are right that if the running config has a description on an interface and the startup does not, when you copy from startup to running the description will still be there. That is just how IOS works.
The only way that I know of to get what you are asking for is to manually build a config file that will copy some elements from startup to put into running (which replace existing elements - like IP addresses) and then manually put in statements to remove things from running that you no longer want to have there. It is not automated, and I know that is part of what you want. But it is the only way that I know of to get the result that you want.
HTH
Rick

SUP720 load specific config to startup during rommon

Similar Messages

Maybe you are looking for