Super Frustrated Out of the Box- Time won't set correctly. Aargh.

I cannot get the time to set correctly. It keeps switching back to GMT. I migrated my old desktop to this new baby so I tried the only fix I could find which was locating the folder /localtime/ and deleting. Any suggestions? Commiseration? This is denting my already severely limited geek esteem.
Message was edited by: pettirosso
Message was edited by: pettirosso

Thanks. It's working now.

Similar Messages

Late 2013 13" Macbook Pro Retina Out of the Box Condition

I have just purchased my LAte 2013 Macbook Pro Retina 13" 2.6Ghz i5 512 Gb. Out of the box, it won't boot because there is no charge in it, and the keys feel a little less tactile, a littile stiff than the one on my Late 2012 Macbook Pro Retina. Also when the Macbook Pro finally booted up(after i plugged in the mag safe adaptor) I checked the battery status and there is already 3 charge cycles on it. Are these normal for an expensive Macbook Pro out of the box?
Thanks!

Whether any previously built Mac notebook of any model came out of the box with a charge in the battery doesn't mean currently manufactured unit will or does. There have been several posts on these forum about the newest units not having a battery charge. I suspect there are many more units then are represented on these forum simply because most people would actually connect the AC charger as the first step in setting up a new computer and then you have others that don't think anything about it.
Who said the battery was Discharged Deeply. Just being at 0% of a charge doesn't mean it ws Deeply Discharged. Sure it isn't the best thing to do once the battery has been charged fully to constantly discharge it to 0%.
The battery has built in circuitry
Since this is the second brand new system you have had that has come like this, and many other it seems, I would say it is normal for the newly built systems.

Clean Install VS Time Machine for "out of the box" performance

Hi all ^^
Just under a year a go I made the leap of PC to Mac and have never looked back, im super happy with my Mac however I have been experiancing a decrease in performance since Ive been using it, back when I was using a PC I clean installed the OS once a year and then proceeded to add my files back, thus restoring my PC to full performance.
Ive been reading around these forums looking at Time Machine backups, hoping to see 'how much' gets restored when you perform a recovery from time machine, and from what I have read is that everything gets restored. So my question is purely for some advice and clarification
"If I want to restore my Macbook to its "out of the box" performance, Is it viable for me to use a Time Machine back up?"
if not
"If Time Machine Back ups wont help restoring performance, Would it be possible to Clean Install and then extract purely the Files from my TM Back up?" I read another user had issues, the Mac recognised the files belonged to another mac and he couldent use them.
So I wont waffle on any furthur, but im looking for the easist way to clean install or restore performance to my Mac, a long term solution I can use each year
Please and Thank you
Em

Thankyou for your answer
Im quite a clean freak when it comes to my PC, I keep my desktop bare, things I dont use remain unloaded.etc
I think as I am without a Defrag or Disk Clean up tool I feel abit helpless to maintain optimal standards. I not very experianced with the in's and out's of computers but all I really want on my Mac are my Files, Applications and the OS, nothing more.
I appreciate your time and experiance, so ild ask instead: In your experiance is it worth performing a clean install? I have hadly any junk on my Mac, and from the tone of your post you beleive a program such as MacKeeper would be sufficent?
Futhurmore a clean install once a year isnt worth it? I depend alot on what people have told me, so I may have fallen victim to a rumour :S

T3i won't turn on out of the box

I just bought a Rebel T3i and it won't turn on out of the box. I've done everything exactly as the directions say, but each time I flip the "on" switch, nothing happens. I've managed to turn it on but ONLY by flipping the "on" switch, taking out the battery, putting it back in, then flipping the battery door closed (entire sequence with the "on" switch in place). So far, of all the things I've tried, this is the only thing that works. Has anyone else had the same thing happen or can help me figure out what might be wrong? I live in Africa and had the camera brought here with a friend, so unfortunately, just returning it isn't really an option at this point. Thanks!

And you are certain the battery is charged before you try?
Otherwise, returning, or warranty service may be your only options.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

I bought iPod Touch 14.5 gb 2.21 (5H11a) a few years ago. Due to unexpected life issues, I was unable to take it out of the box, until May 2013. I set it up as much as I could. However, it won't upgrade. I keep getting -1 error. Suggestions please...

I bought iPod Touch 14.5 gb 2.21 (5H11a) a few years ago. Due to unexpected life issues, I was unable to take it out of the box, until May 2013. I set it up as much as I could. However, it won't upgrade. I keep getting -1 error. Suggestions please...

Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
From:
http://support.apple.com/kb/TS3694#error1
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

EliteBook 8760w won't boot out of the box

As stated, this notebook won't boot out of the box. I get a screen that reads " Phillips windows 7 64bit image"
The below, there a boc to rnter a computer name and to search AD or a abort button.
I've run all the diagnostics and they are fine. I try to tap into f11 and I get a screen flash and then it goes back to starting windows and the usual Phiilps screen. I'm thinking just a bad image and a lemon from the factory.
Does anyone have an answer for me?
Thanks
-Thor

For fastest resolution contact HP Support via Chat or Phone. Choose your country here> Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Help Please - on a VC that works out of the box with MAC before I sellup

I have to declare that I’m somewhat frustrated at the moment and I could do with some good advise please bare with me while I explain.
I have recently converted from all types of PC systems and MS OS to Apple. The conversion was based on a few drivers.
1, My wife finally has decided to “learn” how to do her own web work instead of asking me to look up this or that for her. So as she was starting from scratch I thought MAC.
2, At the same time I had a play with Vista at work and disliked it. I was using XP & W2K at the time.
3, I wanted to update my home hardware, which was 3 years old.
4, The accountant said I hadn’t spent enough on IT last year.
5, New project work in the planning that required video/audio work to upload onto the web and everyone said MAC was the best.
So having looked around and done what I thought was enough research I started investing. To date I’ve invested £4500 plus.
Started by buying
iMAC 24” 2.8 Gz Intel with 4GB ram (for the home office)
MacBook Pro 2.4 with 4GB ram (for out and about working)
iPHONE 16GB (which is great)
VMware Fusion was installed for those things that I couldn’t live without until I found a suitable replacement like MS Money, Paint Shop Pro, MS Office etc. Installed XP.
Tried Open Office found it to clunky and hard work working off files for MS Office that others sent/required. Ended up buying Office 2008 only to find VB macros don’t work in Excel and all my company spreadsheets still need PC MS Excel to run so back into XP via Fusion.
Then to MAIL which is great on the iPHONE as I can easily monitor my 5 email accounts, what a result. But now I come to attach JPG files as I would in outlook and they open into the content of text in the mail and will not stay closed but disrupt the message. Wholly unacceptable to my way of working with no cure.
Scanning next, so I down loaded GIMP to replace PSP which I find useless so back to PSP I go again via XP & Fusion.
Next and finally the VC project, Now please bare in mind that all I want to do is shoot film, upload it to edit it and then mount it on the web page. I have no desire to become any form of expert in the field just get the job done.
So reviewed iMovie to understand the spec. Realise it has limitation and reviewed FCE which seems to plug the gaps and boarders on being more professional.
At this point I must say I’m not totally new to this subject as I have used Studio8 and a JVC GR-DVL166EK video cam a couple of years ago and got on ok without any issues simple plug and play with great results.
Having reviewed the standards that the software is reported to work too without any publicly declared exclusions or exceptions by Apple I went shopping for the VC. (I didn’t know of the forum at the time and to the best of my knowledge Apple don’t advise of its existence in any product information on anything I have bought.)
I buy a Panasonic HDC-HS9 for £700 which doesn’t flaming work despite the fact that it should based on all the standards quoted by both manufactures and there are no disclaimers from either party that it won’t work.
I have reviewed the compatibility list on the support page (now I know its there) and find that the Panasonic HDC-SD5 does work. I reviewed the comprehensive detailed model spec on the Panasonic web site and there is no differences between the to models at all accept the HDD.
So why don’t it work?
*At the end of the day can anyone please recommend a VC that will produce high quality results without the need of a 3rd party software to connect and upload files convert and muck about instead of getting on with the job.*
And if all the publicised specs don’t allow you to conclude compatibility how can you protect your investment? Where do we legally stand and where is the accountability to the consumer.
<edited by host>
I am that fed up with the last 3 months of mucking about Bill Gat*es may just get me back.
Thanking anyone in anticipation for some meaning advise and help.
Regards
Alan

Hi, and thanks for you interest. The problems is that whether I'm using iMovie or FCE I get to a stage where the thumbnail image is present but if you try to play, import or any other action in either app it closes down and a message comes up " The Application Final Cut Express/iMovie quit unexpectedly - Mac OS X and other application are not affected" then asks if I wish to relaunch. I then hit the report to Apple button and afterwards relaunch. I was recommended to use Voltaic which I have tried, it worked but is to much mucking about for something that should work out of the box.
This problem happens on both the iMAC and the MacBook so quite sure it's not a OS software issue. All software update are up to date also.
Any ideas?

Can I use my iPhone 6 out of the box to take photos, before syncing it with my computer?

I will be receiving a new iPhone 6 at the beginning an upcoming trip and would like to use the great camera on it to take photos. The problem is I won't have my computer with me during this trip. Will I be able to use my iPhone right out of the box to take photos, and when I sync my iPhone for the first time will I risk losing those photos? Thank you for the help.

Will I be able to use my iPhone right out of the box to take photos
Once you have activated the iPhone with a sim inserted
when I sync my iPhone for the first time will I risk losing those photos?
Yes unless you transfer Photos off iOPS device to your PC/Mac
see this
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

HP Pavillion Does NOT work Straight Out of the Box after Purchase

My daughter bought a new HP Pavillion from Office Depot before starting computer classes at the university. The first one would not work at all and after the tech folks tried all that they could and it would not work, the Office Depot staff exchanged it for another one. Straight out of the box, it does not work. It crashes constantly. My daughter has spent HOURS that she needs for assignments on the phone with HP tech support. Here is where she stands with the situation now: She bought the extended warranty, but apparently that does not cover computers that don't work. The HP warranty....does not apparently assure that you get a working computer either, even when it's just days old and won't function. So....after spending from about 1p to nearly 6p today on the phone with HP tech support, she is not assured that it will work.
They are calling back on Friday to see.
So if it is NOT working, are we just out of luck with a piece of junk that does not function except as a word processor? That won't connect to the internet without crashing? We have been given no options or assurances.
( Post edited by Moderator) When you buy a computer, it should work when it's brand new. If you have a warranty, does that mean that HP stands behind their product and refund the consumer's money when it doesn't? The new HP Envy printer did not work, due to a defective ink cartridge enclosed with it. Does any HP product work at all?

@Mariellynne
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
I work for HP

Out of the box behavior of the Pagination control

Why does the Pagination invoke the PageFactory callback upon page count change? And when it does invoke it, why is it with currentPageIndex=0? Should there be an API to remove this listener if this is undesirable behavior? If we know we may need to alter the Page Count after construction of the Pagination control, would it be best to remove the old one, and construct a new one for display at that point since the current implementation seems to behave inconsistently when one wants to alter the Page Count post-construction and/or callback configuration.
Please consider the following scenario:
The user is viewing a TableView of items. Below the TableView is a Paginator whose PageFactory callback fetches rows from a database and calls TableView.setItems(<results>). There are 3 pages and the user is on the 3rd page. Only 5 rows remain out of a possible page size of 20. The user decides to delete the 5 remaining rows on page 3 from the table/database. Now it would seem natural at this point to conclude that page 3 no longer exists and we would want to the user to return to page 2. If we simply call paginator.setCurrentPageIndex(currentIndex - 1) then we will correctly transition the user to Page 2, however Page 3 will remain displayed in the Pagination control and if the user browses back to that page, he is met with the "There is no content to display" label. So it would seem natural that we could presume this happening and instead call paginator.setPageCount(2), then paginator.setCurrentPageIndex(currentIndex - 1). That way the Pagination control reflects an accurate number of pages. Unfortunately, this results in TWO callbacks to the PageFactory method, one at currentPageIndex=0 and another at the correct index. Sometimes the widget that is constructed in the PageFactory callback (TableView) doesn't get displayed properly (disclaimer: speculation ahead) probably due to some asynchronous nature of the two competing callbacks (?).
I'm struggling to get a handle on this control. So far, my experience with TableView has been pretty good. I love the features you get with this Pagination control out of the box, but some of the choices that were made with regards with what APIs to expose confuse me. The frustrating thing about callbacks is that sometimes you can get caught in this callback hell where there are all sorts of callbacks being invoked and you don't really know why. Often times, the Javadoc does not indicate that there is a default listener being applied to certain property that may invoke one of these callback. I don't mean to sound like a rant. Overall my experience with JavaFX 8 has been very positive so far. I can usually always find a workaround if a come across a weird issue with an out of the box control. Worst comes to worst, I'll write my own Pagination control.
Thanks for your time.

For anyone else that may come across this post. I was able to find a workaround by simply using a field, boolean pageCountReset, and then bounding all of the logic in my page factory call back with a condition checking for this boolean value i.e. if (!pageCountReset) // continue, else // noop. Then, if I need to reset the page count, I set my boolean to true so that the page factory callback results in a noop. Because the pagination control under the hood will make currentPageIndex=0 (as I talked about above) if the page count is reset, I then have to be very explicit and either call my page factory callback manually to refresh the current page if it still valid, or I call pagination.setCurrentPageIndex(<new index>) so that the page factory callback will be invoked and pageCountReset will be false at this point, so I can successfully transition pages.

IMac #2, Froze out of the box...

A quick update on the status of my "Freezing 24" Aluminum iMac". The new replacement iMac froze at the store, right out of the box.
5 hours of AppleCare phone support, 11 days of in store repair and 2 hours of standing in the store... I have a new replacement iMac with potentially the same problem.
The original 24" 2.4G Aluminum iMac was freezing regularly about 5 - 10 times a day and was almost completely unusable. This machine was 70 days old when I decided to contact AppleCare.
After AppleCare referred me to the local store for repair I was told 3 - 5 days for a replacement of the logic board (motherboard), this turned into 7 days then 10 days and finally 11 days before the part came in and was replaced.
The Apple repair technician indicated that the iMac had passed all hardware tests and was ready to go.
Fortunately, I had read the forum posts and wanted to know for sure that the freezing issue was resolved. I decided to boot the machine up in the store, and verify if it was or was not remedied.
Bad News! Upon initial boot, artifacts and graphics glitches and 2 minutes into the OS, changing screen savers the iMac froze.
Besides the freezing, they (Apple repair) had also damaged the outside case of the new iMac and scratched the Aluminum casing on 3 corners during repair.
I was already not too happy, however the repair technician was GREAT (Thank you! Repair Man @ Lynnwood, WA -- Left out his name, as to not cause problems) and decided that with the iMac still freezing and the damage to the machine it would be their pleasure to replace the iMac with a brand new one. ** Keep in mind, my iMac is 88 days old **
At that point, I asked store management if it would be possible to upgrade my purchase to the 2.8 Extreme and pay the difference since we were doing a replacement anyway. They were very helpful and friendly and made this an incredibly easy replacement.
Here is the bad news... Right out of the box, the new Aluminum 24" 2.8G iMac froze about 2 minutes into the 2nd reboot after applying the iMac 1.2 update for Tiger.
Not sure if that is the problem (the 1.2 update), but this is very frustrating. The Apple store manager was very empathetic and was promising to make this right no matter the cause.
After several more reboots and tests, I was unable to get the iMac to freeze and maybe it appeared to be an isolated case.
We decided that I would take the new iMac back home and if it failed even once more that they would indeed replace it until I had a working model regardless of how long I have it.
I have now installed a fresh copy of Leopard, and it has yet to freeze as I go through the setup screens. I will update if any problems arise.
Hope this helps.

Here's an update.
I haven't had one freeze yet.
Unfortunately, I wish I had seen this at the store...
I didn't think to check, but on a black background you can clearly see an obvious white light bleeding in on the edge of the screen in the lower right portion of the display.
Backlight bleeding is a problem with a lot of iMac's... I had yet to have it happen to me, but it looks like my iMac (new again) replacement is going back to the Apple Store tomorrow for another replacement.
This is getting real old. Besides, like all Mac people, we care about the resell value of the machine. There is no way to get your money out of your iMac, when you have to disclose that it has a bright white backlight bleeding spot on the display when you watch a DVD or when the screensaver comes on.
Spending a few thousand dollars on a new Mac shouldn't be like playing the lottery. Hoping you get a good machine, or maybe you get a freezing one or a bad display.
So now it is adding up.
5 hours on the phone with AppleCare
11 days without the iMac while being repaired
2 hours of standing in the Apple Store
4 hours of driving back and forth to the Apple Store
... and 2 more hours of driving tomorrow, with another 1 hour of waiting.
And all of this, while hoping to get one that works and is worth $2300.00...

IPod Shuffle (2nd Gen) not lighting up out of the box even afr 2hrs of chrg

Can somebody tell me what is going on here? This is the second shuffle that (I brought back the first one to circuit city) I can't get to work out of the box. That is, after charging for 2 hrs (I've tried to charge via my outlet as well) I can't get any lights to show up.
What gives?
Any information would be greatly appreciated.
Thanks!

So far, you hadn't really described what you were >doing...
is the "wall charger" an Apple iPod USB Power >Adapter? >Does the Shuffle's LED show continuous orange >while in >the dock?
Plugging in the dock to my outlet per the apple ipod usb power adapter. Looked at the light immediately and no orange or any lights what so ever. So, I figured it needed to be charged, Apple specs say 2 hrs for 80% charge, 4 hours for full. I left the thing on there all night long when I went to bed. Got up. Checked the shuffle and no lights.
Question: is the (oranage) light supposed to come on immediatly after it's plugged in?
The fact that this is your 2nd one is interesting.
Apple specs claim 4 hours to fully charge the Shuffle but >that's optimistic... many here have experienced much >longer charging time
This is pretty assembly IMHO as this si pretty frustrating regarless if it's operator error or a another defective unit.
Any more information would be greatly appreciated.
Thanks again for your response.
G

Out of the box macbook pro 15" c2d problems

evening all,
right out of the box, i have had kernel panics every time i boot my new macbook pro c2d. i have also had the awake from sleep problem some people seem to be having. i am also unable to install either boot camp, parallels, or vmware. i have tried winxp, 2000 and vista in every combination. every time i try it corrupts the volume beyond repair and i have to wipe the hard drive and reinstall os x. i am getting worn out by banging my head against the wall. i thought this stuff was supposed to be easy. when i went to check on the firmware version for my macbook pro 15" c2d i noticed that i have the boot rom version and the smc version installed for original 17" macbook pro not the c2d version. it won't let me change the firmware back to a 15" c2d. it is showing MBP12.0061.B03 1.5f10 and i should have MBP22.00A5.B00 1.12f5 according to apple specs.
i will try to reset my smc, but the pram can not be reset via the usual keyboard combination because it just doesn't work like it did on my powerbook.
i am also going to try disabling the hibernate mode as suggested via terminal.
i am going to try trashing the plist preferences for the .AutoWake, PowerManagement and the systemuiserver.
i also have the problem when reinstalling os x several times that the optical drive gets stuck reading the original system disks and i have to start all over again. whew!!!
btw, i am a hardware tech but this is too much of a waste of time.
any other suggestions are very welcome.
macbook pro 15" c2d Mac OS X (10.4.9) tricked out powerbook 15"

here is an update for everyone, or at least you will get a good laugh out of it. I sent the macbook to applecare to be fixed and I just got it back. they replaced the harddrive and restored the os.
guess what? I turned it on and it had a kernel panic! then I tried to set up a user account and it had a ......... kernel panic! I had to laugh, what else can you do at this point?
they didn't fix what i told the tech support guy was the biggest issue on this machine. the boot room version is still MBP21.00a5.B01 which is for the 17" C2D. it is paired with the smc version 1.12f5 which is the version apple has listed for the 15" version. tried to change the boot room but it tells me it does not need the correction. everyone knows best yet i still get ....... kernel panics.....! lmao
here is the last kernel panic log if anyone is interested:
Wed Apr 18 13:35:56 2007
panic(cpu 0 caller 0x001A3135): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x0a124a48, CR3: 0x00c85000, CR4: 0x000006e0
EAX: 0x0a124960, EBX: 0x02cd7008, ECX: 0x0000e070, EDX: 0x00000000
CR2: 0x0a124a48, EBP: 0x13dfb879, ESI: 0x0253ac00, EDI: 0x00000000
EFL: 0x00010203, EIP: 0x2a5dcb57, CS: 0x00000008, DS: 0x56b50010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13dfb678 : 0x128d08 (0x3c9afc 0x13dfb69c 0x131de5 0x0)
0x13dfb6b8 : 0x1a3135 (0x3cf7b0 0x0 0xe 0x3cefe0)
0x13dfb7c8 : 0x19a904 (0x13dfb7e0 0x0 0x989607 0x0) Unaligned frame
Backtrace terminated-invalid frame pointer 0x13dfb879
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
Wed Apr 18 14:06:31 2007
panic(cpu 1 caller 0x001A3135): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0xd8505ed5, CR3: 0x00c85000, CR4: 0x000006e0
EAX: 0x00000001, EBX: 0xd8505ec1, ECX: 0x02bc806c, EDX: 0x02c4e6e8
CR2: 0xd8505ed5, EBP: 0x13ea3df8, ESI: 0x000e0000, EDI: 0x00000000
EFL: 0x00010282, EIP: 0x0017e42a, CS: 0x00000008, DS: 0x02c30010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13ea3bd8 : 0x128d08 (0x3c9afc 0x13ea3bfc 0x131de5 0x0)
0x13ea3c18 : 0x1a3135 (0x3cf7b0 0x1 0xe 0x3cefe0)
0x13ea3d28 : 0x19a904 (0x13ea3d40 0x2d18b88 0x2c8fba0 0xe)
0x13ea3df8 : 0x1607c1 (0x2c4e6e8 0xe0000 0x0 0x1)
0x13ea3f48 : 0x1a33a8 (0x11b9c80 0xa35a3000 0x0 0x1)
0x13ea3fc8 : 0x19a834 (0x2bd3c40 0x0 0x10 0x0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff5f8
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
macbook pro 15" c2d Mac OS X (10.4.9) tricked out powerbook 15"

Not able to get Out-of-the-Box Examples Index Page for running the jsp examples

Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas

Hi.
Please post all WLS 7.0 beta questions to the beta newsgroups -
weblogic.developer.interest.70beta.*.
Thanks,
Michael
Vikas wrote:
Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas--
Michael Young
Developer Relations Engineer
BEA Support

Add javascript to Out of the box Modal Dialogue Box in Sharepoint 2010.

Hi,
We have Sharepoint and Project Server 2010 SP-2 enviroment. We are using Project Server Timesheet for our managing Time logging.
Project Server 2010 has "Add existing task" Modal Dialogue box in which I want to add "Javascript" code in order to sort the Project Server Timesheet Line Claasification listbox control in Ascending order.
As you can see from below screenshot "Standard" the Out of the box timesheet line classification is coming at top and then our custom line classification coming.
But I want to sort this list in ascending order so that this "Standard line classification can come at the bottom of the listbox control.
Please suggest me how can I achieve this.
Thanks much !!!
Sachin Vashishth MCTS

Thanks SaiRam from input, I can get JQuery for sorting the control over the internet no issue. I have to pass the ControlId in J-Query to sor the items in that control and I am not able to get the control id as it;s modalk dialogue box.
Can you please explain further here, also let me know in case I am wrong in my understanding.
Thanks !!!
Sachin Vashishth MCTS

Super Frustrated Out of the Box- Time won't set correctly. Aargh.

Similar Messages

Maybe you are looking for