Supplement for automatic postings ?

Hey Experts,
Please explain me what is Supplement for automatic postings ?, with example, if possible please.
Thanks a lot,
Chintan Joshi.

HI
what is Supplement for automatic postings ?, it is manual posting
example,
If we take purchase GL we  give Automatic posting tick mark which means the entry posting to the GL is allowed ony for automatic posting
ie MM - FI Purchase by GRIR to MIRO processing the entry pass to the respective GL this is automatic posting
Manual posting Posting using FB 60 ect... direct  Debit or credit by JV to the GL that is manual posting
Hope this will be usefull

Similar Messages

  • Flow Chart for Automatic postings

    Hi All
    Can somebody give me the process flow chart for Automatic Postings
    Regards
    Jagadish

    hi Jagadish,
    There are few factors which affects the automatic postings:
    A)
    1. Business transaction ie t code.
    2. valuation area
    3. Material and material type
    4. mvt type...
    In all you can say :
    Chart of accounts + Val. Area + Val. type+ transaction + Valuation grouping code + account grping code + valuation class + G/L accounts
    all above factors in all affects the determination ....
    Hope it helps....
    Award if helpfull...
    Regards,
    Priyanka.P

  • Condition supplement for automatic tax in sales order as well as billing

    Dear All,
    I am using pr0000 condition suppliments in my pricing procedure.I am maintaining material wise price along with taxes in pr00 condition(vk11).Every thing is fine but for the data getting posted into FI.It gives an error stating that error in account determination.What could be the possible reason for this error.?can we enter taxes for the material here?
    When i am Entering the Taxes manually for the same material it is getting posted correctly.Where i am going wrong?Your solution to this is solicited and reward points are assured for
    We are following TAXINJ proceeudre and we are connecting FI tax code through condition records.
    govind.

    Hi
    Posting of Sales Tax or any taxes are thru Tax Codes. We have to configure tax code A0 for out put tax & V0 for input tax. Tax codes can be configured thru T-code - FTXP. The rate can be maintained at config level while creating the tax code or else we configure the tax code and later we shall maintian rate for the tax code in T-code FV11.
    Note: - Tax codes are exported from one client (development client)  to anoter and inported in receiving client (testing cleint).
    Taxes rate maintaince is not thru VK11 it is FV11 for a tax code.
    Thanks
    Colin Thomas

  • Account 113000 3000 not defined for tax postings

    hi
    while generating invoice
    getting the follwing error.
    "Account 113000 3000 not defined for tax postings"\
    here 3000 is company  code.
    wats the solution for this...

    Hi
    OK, you need to change back your G/L account, not to be defined as a VAT account.
    Then, go to Financial Accounting / Contract Accounts Receivable and Payable / Basic Functions / Postings and Documents / Document / Define Account Assignments for Automatic Postings / Automatic G/L Account Determination / Define Accounts for Sales/Purchase Tax.
    Check there if any of the accounts you entered is 113000. If that is the case, correct the entry.
    Bogdan

  • Assigning Cost Centers to Automatic postings

    Hi,
    We have a situation where we want to make the 'cost center' field a required field, for all GL postings.
    However, If I just change the the config setting in the field status code, there are automatic postings from SD, MM etc. that may be blocked from being posted.
    I did some searching around the forums, but I can't find a way to address this issue. For a goods movement, the system can assign a GL account number using the account determination. But is there also a way to assign Cost Centers to these postings?
    Does OKB9 handle these postings from MM/SD? Or is it only for automatic postings such as exchange rate differences and tax?
    Any help would be appreciated.
    Thanks and Regards,
    Sam

    hi Sam,
    OKB9 handles any automatic postings (MM, SD, etc.), just give it a try! Of course it only works for P/L accounts, not for B/S ones. It does not make much sense to post controlling objects on B/S accounts (at least for me).
    ec

  • Accounts for Automatic Offsetting Entry

    Dear all,
    I don't know the purpose of Accounts for Automatic Offsetting Entry.
    Please give me a detail example. Anh tell me how to configure and choose transaction to this bussiness
    step by step
    Thank in advance
    Minhtb

    Hello
    Certain G/L items are created automatically. This reduces the manual entries required.
    During clearing, items for cash discount, payment differences, revenues from charges, exchange rates differences, and any necessary tax adjustments are amended automatically
    With all business transactions containing cross-company code documents, offsetting entries representing receivables and payables between the company codes involved are amended automatically.
    When posting down payments, you may have to post the tax from a general ledger viewpoint. No special line items for tax and tax clearing are generated for this in Contract Accounts Receivable and Payable. Only the tax code, tax amount, and account numbers for the tax account and tax clearing account are noted in the open item for the down payment. This information is sufficient for updating the general ledger.
    The accounts to be posted to must be defined in Customizing for the line items to be created automatically IMG structure for Contract Accounts Receivable and Payable ® Basic Functions ® Postings and Documents ® Document ® Define Account Assignments for Automatic Postings
    Reg
    assign points if useful

  • Automatic postings out of MR11 pick wrong Alternative a/c no from the GL.

    Hello Experts,
    I am facing an issue with MR11 GR/IR clearing.
    I came up this topic that the alternative accounts used were not the same as per the automatic postings out of MR11
    meaning that MR11 post wrong alternative account, while the manual uses the correct one so please assist do i need to check any substitution for this .
    For GL xxxxxxx Alternate account should be yyyyy but its picking other alternate account.
    Thanks,
    Gita

    I agree with you - but if you check this screen shot you might get to know the actual error.

  • F5061  Balance in local currency EUR is too large for automatic adjustment

    My Company code currency is EUR. The customer has made a downpayment in USD (say 100) and i am now to clear the same against invoice of same amount in USD (100 $) but its is resulting into minor differences in Local currency. I am getting the following error
    Balance in local currency EUR is too large for automatic adjustment
    Message no. F5061
    Diagnosis
    For postings in foreign currency, it is possible that the balance in foreign currency is zero, but not in local currency. Providing the balance in local currency does not amount to more currency units than the document has line items, the system adjusts the amounts automatically. If an automatic adjustment is not possible, the amounts must be adjusted manually in local currency.
    System Response
    The document is not posted in local currency without adjusting the amounts.
    Procedure
    Adjust the amounts in local currency.
    How can i have the system automatically fetch the Gl accounts to post the exchange rate differeces.
    I have maintained the settings in FBKP- Exchange rate differenes
    Thanks & Regards
    Pooja

    Hi,
    I have the same problem; my company code is defined in HUF and I am trying to post a vendor invoice in Euros.
    I have a 10% maintained there and still receiving the error, either for differences of just one HUF. The strangest thing is that differences are automatically adjusted (also for discrepancies over the 10%) when posting through FB60 but not when using FB01.
    Any idea?
    Thanks in advance for your input.
    Best regards.

  • Automatic postings r not updated thru business area wise like dep.run tax c

    automatic postings r not updated thru business area wise like dep.run tax code also......how to updated this....
    my client requirement.....plz halp me

    Hi
    Business area updations will not get updated through automatic postings like tax line generations, etc.  You will have to search for some note for updations.  Otherwise while preparing blance sheets for business area, you can make adjustment postings.
    Regards,

  • Defining Accounts for Automatic Offsetting Entry

    Dear all,
    From IMG: I Access the activity using the following navigation option:
    Financial Accounting (New) ->Accounts Receivable and Accounts Payable ->Business Transactions -> Postings with Alternative Reconciliation Account -> Other Special G/L Transactions -> Define Accounts for Automatic Offsetting Entry
    I'd like to ask a question: If I can define more items in column Account type/sp.GL ind? where I can do it?
    Thank in advance
    Minhtb

    Hi
    Based on Business Transactions u can assign the Alt Gl MRecords.  Like Down Payments, Payment Requests etc.,
    Shammi
    assign points if it is helpful

  • Payment method is not updated in FBL1N in automatic postings

    Hello Experts,
    Can you tell what are the reasons of not updating the payment method when automatic posting is done,
    ( In FBL1N tcode, when the balances are generated, it is found that fot the particular users the payment method D is not updated in automatic postings. )

    Hi Pari,
    The Payment method is maintained in vendor master and that is enough for F110 to pick up the line items of the vendors.
    The payment method is populated in line item only if the user while posting the document enters it manually in the field payment method.
    Regards,
    SAPFICO

  • Allowing of  automatic postings to all tcodes except F-58,FB08 and FCH8 .

    Hi gurus,
    I have the option Automatic posting for a gl Account in FS00.
    The gl account post automatically where ever it reflects.
    But i dont want the automatic posting to the tcodes:-F-58,FB08,FCH8.
    the user will enter the glaccount manually in the above 3 tcodes and run the tcode--but it throwing error bcs of automatic posting option.
    its very urgent issue
    Thanks
    sasikanth.
    Edited by: sasikanth reddy on Jan 7, 2008 12:37 PM

    Hi,
    As per my understnading , automatic postings will happens only after account determination. (Which we want)
    If you want to stop some t.codes you don't give account assignment to that transactions.
    If possible elaborate the question, it was not clear where exactly getting the error.
    Tx,
    Veena

  • Automatic postings

    If you make a field status required for your invoice receipt or payment like profit center, could you still run an automatic payment run?

    Use the TCODE: OKB9 for assigning the cost objects defaultly in case of the automatic postings transactions.
    In OKB9, you can give the default cost object for the GL for each company code.
    This is applicable not only for APP, any transaction, which triggers automatically
    VVR

  • List of GL accounts that are Open for manual postings

    Hi,
    I am trying to download a list of all the GL accounts that are open for manual postings.  Meaning in FS00 the check box "Post Automatically Only" is not ticked.  Also I would like the list to include the Field status group associated with the GL account.  Does anyone know how i can find this?  I looked through the tables SKA1, SKAT and did not find it there.  When I get the technical information for the account, it says Structure "GLACCOUNT_SCREEN_CCODE" and field "XINTB."  Any ideas?
    Thanks,
    Rashad

    Hi,
    Post automatically only and FSG are company code specific. so you should be checking that in relevant table SKB1 which has companycode specific details.
    Regards
    Shivappriya

  • Account  has the indicator 'Automatic postings only'

    Hi guys!,
    The company where I work for is right now implementing HR module, HR team are traying to post from HR to FI but the system says "Account "6110001020" in company code "DEU" has the indicator 'Automatic postings only'".
    I know what is the problem, but if I remove the check from "Post automatically only" option, anyone could posting in thoses accounts and that can´t happen.
    I wonder if there is another way to do this whitout removing that check????
    Thanks in advance!!
    regards...

    But, if these account are not accounts determinations for others modules, they are just for HR; what can I do in order to post from HR to FI living the check box 'Automatic postings only' ?.
    If these are not account determination for other modules, they are just for HR. (as you said). HR is also other module. Any entries are coming from other modules like MM, SD, HR etc. those accounts MUST be kept as "Automatic Postings". Even if the entries are coming from HR module to these GL accounts, those GL accounts must be kept as "Automatic Postings"
    Regards,
    Ravi

Maybe you are looking for