Suppliers which are active and not being involved for a long time

Hi All,
Is there any way we can find suppliers which are active but not being used for a long time (for a specific duration) . i.e being involved in no open POs or no invoices processed or no payments made.
Please advice.
Thanks

Hi Abhi,
I have created some queries for the same. COuld you help me if I am going in the rite direction.
I have created a query to find the suppliers which are not being used in the POs for the past one year by using the below query: But for invoices and payments to be included, I am finding it a bit difficult....need help..............
--FINAL QUERY
SELECT vendor_id, vendor_name, creation_date, last_update_date
FROM po_vendors v
WHERE v.end_date_active IS NULL
AND v.enabled_flag = 'Y'
AND NOT EXISTS (
SELECT 1
FROM po_headers_all h
WHERE h.vendor_id = v.vendor_id
AND h.creation_date(+) BETWEEN (SYSDATE - 365) AND (SYSDATE))
ORDER BY vendor_id DESC
Is it possible to send me the program so that it would be helpful for me to use it.
email: [email protected]
Help Greatly appreciated.
Thanks
Aman

Similar Messages

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time con

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

Samsung Note 2 - AT&T - not showing up for a LONG time?!?

I just called Best Buy today and the employee said he doubts he will see this phone in-store for a LONG time. In addition, there is no way to be put on a wait list or anything.
This sucks 100% since I pre-ordered online, and then I was cancelled by Best Buy website glitch.
Anyone else have a better estimate when Best Buy will get this phone?

I agree. I just hope I get it by the end of the year so I can use my $50 Phone Freedom Gift Card for upgrading. Also, since they cancelled my online order, I MUST use my RZ certs by 12/09/12 since Best Buy screwed up. This sucks. I wish someone had some good information.
Here are the excuses I heard thus far:
"Apple has an injunction against Samsung, all the phones are stuck in shipping"
"We will not get this phone for a LONG time, we don't even have a demo unit, no stores do"
I proceeded to tell him one of the stores had the demo units out, and he just said "cool".
So, Best Buy continues to hire employees that don't know what they are talking about.

Security Groups not being discovered / Talking a long time to be discovered

Hi All.
When creating user collections i am creating the majority of them with a membership rule that links directly to a discovered Security Group, so in order for this to happen the security group has to first be discovered by Security Group Discovery Method.
Ok, what i am seeing is that it is taking a long time, very long time for the security group to appear. At the moment a security group that i am waiting on was created more then 24hours ago and has still not appeared in the All User Groups collection.
Now this has got me thinking, some of these security groups are created and will not be populated with users from active directory so it is basically an empty security group, the security group that im waiting on to be discovered is empty also...
So my question... if a security group has no members, does this stop it from being discovered / appearing in All Users Groups collection ?
If this answer is 'no' then i got to ask some more questions as to what is causing this severe lag in my discovery :-(

Hi Jason,
been trawling the internet and found this.... its dated 2010 so must be referring to SCCM 2007, but could still be relevant.. ???
5. Active Directory User Discovery
It discovers the following:
User name
Unique user name (includes domain name)
Active Directory domain
Active Directory container name
User groups (except empty groups)
http://systemcentersupport.blogspot.co.uk/2010/01/discovery-methods-do-what.html
(just added a user to my 'empty' security group - see what happens)

Active Directory Replication, have not been performed for a long time

Good afternoon,
Situation: in the organization with a lot of domain controllers, with one of the sites lost contact. From the period of 18.07.2014 - for the present time, the replication of the two domain controllers did not happen. Now, the connection is reestablished in
magazines replication errors occurred. Replication is performed using DFS.
errors:
The journal replication DFS:
The DFS Replication service has detected an error in the connection to the partner for replication group Domain System Volume.
For more information:
Error 1825 (Error in the security package.)
Connection ID: F29C3738-AF90-4CE8-BFC0-48C1B36A5819
The ID of the replication group: 72D953C6-FD0A-4DA0-8D91-2C0B144E45A1
In the system log:
The Kerberos client received an error from the server KRB_AP_ERR_MODIFIED SERVERNAME $. Used the final name DNS \ SERVERNAME $. This means that the target server failed to decrypt the ticket provided by the client. This may be due to the fact that the SPN
is the destination server (SPN) is registered on an account other than the account used by the ultimate service. Make sure that the final SPN is registered only on the account that is used by the server. This error may also be that the final service is using
a different password for the account of finite life that is different from the password key distribution center Kerberos (KDC) for the account of finite life. Make sure that the service on the server and the KDC are updated to use the current password. If
the server name is not fully defined, and the target domain is different from the client's domain, check for server accounts with the same name in these two domains, or use the full name to identify the server.
This error occurs when you try to access any network resource problem servers.
Storage of deleted AD objects installed by default 180 days.
Solutions found, can someone faced with similar circumstances. I would not want to lower the domain controllers on the problematic servers and deploy them again. After all objects created will be lost during this period, they are the whole domain is not much,
but they are
The result of repadmin / showrepl - this error, on all servers:
SITE \ SERVER via RPC
DSA - GUID of the object: 5f01bea8-b74b-4876-b475-be712a191431
Last attempt @ 15/10/2014 13:00:35 completed with an error, the result -
2146893022 (0x80090322):
Principal Name is incorrect.
7579 consecutive errors.
Last success @ 07/28/2014 14:15:41.
SITE \ SERVER via RPC
DSA - GUID of the object: 436c1016-4363-47b5-a34d-2e5b3e2b0038
Last attempt @ 15/10/2014 13:00:35 completed with an error, the result of 5
(0x5):
Access is denied.
7579 consecutive errors.
Last success @ 07/28/2014 14:15:42.
SITE \ SERVER via RPC
DSA - GUID of the object: b677e990-f7cb-4daf-8f87-16602bc119e0
Last attempt @ 15/10/2014 13:00:35 completed with an error, the result -
2146893022 (0x80090322):
Principal Name is incorrect.
7579 consecutive errors.
Last success @ 07/28/2014 14:15:43.
SITE \ SERVER via RPC
DSA - GUID of the object: 5afbb9b1-7558-4f97-b941-84e1845b48ce
Last attempt @ 15/10/2014 13:00:35 completed with an error, the result -
2146893022 (0x80090322):
Principal Name is incorrect.
7579 consecutive errors.
Last success @ 07/28/2014 14:15:43.
netdom resetpwd / s: NameWorkDC / ud: domain \ administrator_domen / pd: password
Failed to reset the password for the local computer account.
Login failure: The target account name is incorrect.
Failed to execute the command.
If I execute the command, and as a server pointing, use the second server of the same site (which have not replicated on the same site). The command is executed successfully.
If I specify as the /server - IP address of work DC, operating a server running KDC - the command is executed successfully.
Generally, the problem with the controller, I can not get access to any of the listed on the main market, produces an error. You might not have permission to use this resource.
BUT if we turn on the IP, - let without the need to enter login and password.
Please help, what Microsoft's recommendations in this regard. Thanks in advance.

To get a better idea of the DCs' config, let's see an unedited ipconfig /all from the DCs, please.
Is there are third party AV on the DCs?
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

MacBook Pro Battery: How can I protect my battery when not using computer for a long time period 3-months ?

Hello,
In 2014, I am expecting to be out of the states for a long period of time which is over 3 months. I am not planning of bringing my MacBook Pro with me. As a result, what would be the correct procedure for the battery in order to preserve it in the best condition when I return back and use the battery normally.
Many thanks for your assistance!

This is the article for non-Retina systems. Not sure what to do fro Retina units:
http://www.apple.com/batteries/notebooks.html
I would also keep it with a friend/familymember you can trust to not take it out during that time and play frisbee with it to control humidity levels and temperature and access while unattended.

I have no clue what my daughters email and password are for her ipod and she does not either and it is locked for a long time what do i do

can i hook it up in my acct and see if that works?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

How long to leave plugged in to charge ipad mini? should ipad mini be powered off when not being used for a long period of time (several hours between usage times? Please respond this ipad mini is new and I would like to keep it in good condition.

How long should you leave an ipad mini plugged in to charge? How low should the battery be? Should I power it down when I am not going to be using it for several hours between uses? Thank you. I NEED to know these things.

About iPad Batteries > http://www.apple.com/batteries/ipad.html
ssutton709 wrote:
How long should you leave an ipad mini plugged in to charge? How low should the battery be?
Charge it when you see the Low Battery Alert. It is not recommended to Fully Discharge the battery.
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
ssutton709 wrote:
Should I power it down when I am not going to be using it for several hours between uses?
This is not necessary.
Most importantly... Enjoy your iPad

HT1476 My battery shows 100% than 5 min later it says 30% why does my iPhone 5 not stay charged for a long time

My iPhone 5 will not stay charged it says it's 100% charged then 5 min later it says I have 30% battery life please help

Off-brand cables and chargers are often a source of problems with iOS devices...always use genuine Apple cables and chargers as they meet the specs for the device.
The best solution at this point would be to take the iPone, cable and charger to an Apple store genius bar and have all tested to see if there are faults in the components.

TS3276 My mail app has vanished and hasn't functioned for a long time. I am using my desktop with Snow Leopard 10.6.8

My mail app vanished. I can't use the mail app and need it resent to me. I can't see how to do it or where to get it for downloading. HELP.

To reinstall Mail, first try to reinstall 10.6.8 > http://support.apple.com/kb/DL1399
If it doesn't work, reinstall Mac OS X. Insert the Snow Leopard DVD, press C key while your Mac is starting and reinstall Mac OS X. You won't lose any file

Remove battery when not in use for a long time?

Hi, I went overseas and accidentally left my Macbook behind, but brought my charger along. My Macbook had very little battery power remaining when I left (less than 20%) and since I have the charger with me, nobody at home can help me charge my Macbook. I'll be away for quite a few weeks, should I get someone at home to remove the battery for me? Thanks.
MacBook Mac OS X (10.4.8)

Was the computer turned off or asleep? It won't hurt to have it taken off. Normally I wouldn't worry about it unless it was going to be a few more months.
Mort

Selective deletion of request from ODS which is activated and updated

Hi all,
I would like to delete the request from ODS which is activated and updated into data targets, i.e if i have three resquests 1,2,3 which are activated and loaded into cube..now i would like to delete the between (2) request from ods, it says we have to delete latest first(3) , cant we delete this 2 nd request by doing some sort of settings plz let me know if any body got come to know this...plz
Many thanks in advance,
BRB

Hi
Did you look at the Online-Docu (link above)? In the administration of the ODS (I think menue 'Manage' in an english environment -> I've none at the moment) where you see each loaded package there you have a button right of the request id (status of data mart). If you press on this a dialog screen appears. There you can press on the trash icon. This resets the delta queue for the specific request.
You have to do this for request 3 and 2. Then you can delete the request nr. 2. The bw system will then delete this request from the active data and from the change log. After this you can schedule the delta load again. This process will load request nr. 3 to the connected InfoCubes.
If you do not reset the delta queue you will not be able to load request nr. 3 from the change log.
As I supose you want not to delete request nr. 3 because of some long duration to upload and activate the whole request again.
This works fine. I've done the last weeks often because we loaded request with 3 million records and more.
Regards,
H.J.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

Programs which are not being executed for a specific period

Hi,
We are planning to do the application upgrade in few months,with respect to that we would like to find out what all programs/transactions(standard or custom) which are not being executed for a specific period.What is the way to find this?
Regards,
Sam

Hi Sam,
You can use st03 and defice theprograme name and period to sotp the activity.
Regards,
Anil

Suppliers which are active and not being involved for a long time

Similar Messages

Maybe you are looking for