Support validity question about installing and configuring SP13 on same machine as FAST to use both as search engines for SP2010

Hi,
I have a SharePoint 2010 farm which is using its own servers.
This farm has a FAST Search for SharePoint server which is a standalone on a dedicated server.
This farm is my testing staging environment and not a Production environment, eventhough its almost an exact copy of the Production farm.
I would like to replace the FAST server with SharePoint 2013 as a search engine for my SharePoint 2010 farm.
Because i have a standalone deployment of FAST on a dedicated server and i dont have any more servers to add to this farm,
I would like to install SharePoint 2013 on same server as FAST while FAST is still active, connect it to the 2010 farm and do some tests before i will remove the FAST content and query SSA's.
I would like to know if installing a SP2013 on same machine as FAST is supported by Microsoft as long as the FAST is not connected to the SP2013? (performance is not an issue)
What about All in one machines like development servers, is it supported by Microsoft to install FAST on same machine as SP2010 farm? (again, performance is not an issue)
thanks,
Guy

I would like to know if this scenario is supported by microsoft.
This installation will be for testing purposes only, if there are any issues with installing SharePoint2013 on a FAST search machine, i would like to know what kind of problems i may run into.
I'd also like to clear out that this FAST and SharePoint2013 are not comunicating with eachother but with a SharePoint2010 farm that is configured on different servers.
I would really appreciate direct answers to these questions.
thanks for your answers,
Guy

Similar Messages

Question about installing and removing Windows on Mac OS X

Forgive me for asking this because the answer is probably extremely simple, but I just wanted to make sure.
If I use Boot Camp to install windows XP or 7 onto my Mac (OS X), then if I choose to remove windows and repartition my mac into one hard drive will it be the same as if I had not installed windows at all? Will I be losing any space on my computer once Windows is removed? Thanks! I'm still new to macs....and computers for the most part ha....
Message was edited by: dukebsbll

If I use Boot Camp to install windows XP or 7 onto my Mac (OS X), then if I choose to remove windows and repartition my mac into one hard drive will it be the same as if I had not installed windows at all?
Yes.
Will I be losing any space on my computer once Windows is removed?
No.
(55798)

How would i install and configure HS on windows?

Hello,
I would like to explore more about installing and configuring HS on windows box (64-bit).
I have two questions.
1)Is there OD4ODBC software avaliable for 64-bit windows? if not 32 - bit software works with 64-bit windows OS and 11G Database which is also 64-bit?
2)can some provide me more steps to configure it, if it's possible.
3) is there any other way to connect ro MS SqlServer from Oracle other than using ODBC/Gateways?
Thanks,
Steve.

For 64bit Windows you need to have a 64bit DG4ODBC - DG4ODBC 64bit for Windows was first released with 11.2.
1)Is there OD4ODBC software avaliable for 64-bit windows? if not 32 - bit software works with 64-bit windows OS and 11G Database which is also 64-bit?
=> No - only 64bit DG4ODBC is supported - so please use DG4ODBC 11.2
2)can some provide me more steps to configure it, if it's possible.
Please have a look at this note: How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on 64bit Windows Operating Systems to Connect to Non-Oracle Databases Post Install [Document 1266572.1]
which is available through My Oracle Support portal.
3) is there any other way to connect ro MS SqlServer from Oracle other than using ODBC/Gateways? The easiest way is a gateway, but you could use a JDBC driver and load the MS SQL Server JDBC driver into the JVM of the Oracle database, then code the connection.

A question about grub and USB

Hi All
I have a quick question about grub and USB that I can't quite find the answer to by searching. Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this. I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife). I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR. So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick? My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive.
Thanks
Kev

i cant say for hp's
havent worked on any in a while
recent machines have been coupleof dell's , vaio & emachine
which dells do offer it at least the ones i tried , my laptop does(dell)
all home pc's are built by me which do offer to boot individual drives
what hp you getting it may tell in specs
are both discs sata? if so it might not offer this option with 2 drives of same interface
check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
& will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
you may want to consider this in your next venture for pc

How to install and configure a new printer

What are the steps to install and configure a network printer HP Laserjet 4000 to use as standard printer for printing reports. Currently I use default noprint printer.

After defining Printer at Operating System Level on Concurrent Manager Node , check if you can print via lp ( I assume you are using Unix/Linux)
Then register it via Register Form at Install -> Printer -> Register .
Check more on printer basics in Apps at
http://becomeappsdba.blogspot.com/2006/09/printer-basics-in-oracle-apps-11i.html
Atul
http://teachmeoracle.com

Install and configuring SAMBA in Solaris 8.0

Hi
Can any one help tme to install and configure SAMBA on solaris 8.0
Thanks in advance

We don't provide sudo for Solaris 8, but you can try with the package available there : http://www.sudo.ws/sudo/download.html#binary
They don't provide a specific package for Solaris 8 but may be will the binary working correctly in your zone.
An other package, and is builded for Solaris 8, is available on www.sunfreeware.com website.
Regarding the configuration, the method can differ depending on which version you will use. You can find a lot of examples on Internet if you want for details.

What are the prerequsite for installing and Configure Knowledge management

Hi All,
what are the prerequsite for installing and Configure Knowledge management in CE 7.1 eph1.
Thanks
AB

Hi Michael,
Thanks for yor quick response.......Can you please tell me whats the alternative for KMC in CE 7.1 in portal
thanks
AB

INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes.

Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
Below are details of my pc.
OS Name    Microsoft Windows 7 Professional
Version    6.1.7601 Service Pack 1 Build 7601
Other OS Description     Not Available
OS Manufacturer    Microsoft Corporation
System Name   ...........-HP
System Manufacturer    Hewlett-Packard
System Model    HP ProBook 4530s
System Type    x64-based PC
Processor    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date    Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
SMBIOS Version    2.6
Windows Directory    C:\windows
System Directory    C:\windows\system32
Boot Device    \Device\HarddiskVolume1
Locale    United Kingdom
Hardware Abstraction Layer    Version = "6.1.7601.17514"
User Name    ...........-HP\................
Time Zone    South Africa Standard Time
Installed Physical Memory (RAM)    4.00 GB
Total Physical Memory    3.94 GB
Available Physical Memory    1.00 GB
Total Virtual Memory    7.87 GB
Available Virtual Memory    1.25 GB
Page File Space    3.94 GB
Page File    C:\pagefile.sys

To clarify further.... It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine. In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows. If you are using a 64bit OS, you must install the 64bit software. Again, this would include Forms/Reports, WLS, and JDK

After installing and configuring Workflow Manager and Service Bus, I'm getting 403.

I've spent the day installing SharePoint 2013 on a Windows Server 2012 environment. This server is not the domain controller. Following instructions on how to install and configure Workflow Manager and service bus, it appears although I'm following the instructions
(and I get no errors), something is not working.
If I try to go to the website that it creates in IIS
http://localhost:12291 I get a 403 error. Also if I perform the powershell query to get the port number "Get-WFFarm | ft WFMgmtHttpPort" I don't get any value returned to me.
Until I validate that the Workflow Manager is installed and working, I will not attempt to pair it to the SharePoint 2013 farm. Which hopefully makes this a Workflow Manager question not a SharePoint issue.
Can anyone offer any suggestions please? Should I even get a valid webpage if I hit localhost:12291? According to one walkthrough I've looked at I should get an XML display of workflow and security configurations.

I experienced the same two issues mentioned in this thread today.
Regarding the proper XML not appearing at <workflowhost>:12291 I was experiencing the same with an error message in Chrome saying the caller lacked read permissions, and 403 in IE. I had checked IIS, database permissions and connections and more.
All of the setup messages and status checks were a-okay. I voted Zimo's comment as helpful because it cued me in to examine the service in Central Administration - where I found there was no administrator assigned to the workflow service. As soon as that was
done, the workflow host site was brows-able.
The resolution to SharePoint Designer not offering 2013 workflows as an option was in my case that there was an additional WFE on which I had not installed the Workflow Manager
Client. This is noted with a bright yellow box in the section about configuring workflow with HTTP here:
http://technet.microsoft.com/en-us/library/jj658588(v=office.15)
If puzzles are good for your BRAIN then SharePoint will keep it really healthy!
Ramona Maxwell MCPD
SharePoint 2010, MCITP
SQL Server 2008

A few questions about MacBooks and Parallels Desktop.

I have a few questions about MacBooks and Parallels Desktop.
1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
Thanks
Keith

1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
Remember to leave at least 2 or 3 Gb for virtual memory usage.
3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
Good Luck

Basic questions about installing ASM

I can't seem to find definitive answers to the following. Let me try here. I want to build a Linux server, running RDBMS 11.2.0.3, with ASM. This is just the prototype server, in our conversion from Oracle 11g on AIX without ASM to Oracle 11g on Linux with ASM.
I already have an Oracle VM cluster running, and have built a number of VMs from templates, and all that works fine. Now I'm trying to install ASM, and have failed several times. Maybe I'm doing something fundamentally bad. Here are two questions:
1. Is it true that the only (reasonable) way to install ASM is to install the product called "Grid Infrastructure"? As best I can tell, the answer is "yes". But GI seems to be so much more than ASM, much that I don't think I want or need. Is there an easier way to get ASM?
2. The certification matrix swears that Grid Infrastructure 11.2.0.3 is certified on Oracle Linux 6. Yet (1) I see many posts on OTN and elsewhere on the net that say it is NOT supported, and that there are mant problems in gettng the installation to work, and (2) I have been trying to install on OEL 6, and can't get the installer to complete. Specifically, the root.sh script fails with "ohasd has failed to start...". Before pursuing my installation problems any more, I just want to make sure: Should this install on OEL 6?

Terry Phelps wrote:
I can't seem to find definitive answers to the following. Let me try here. I want to build a Linux server, running RDBMS 11.2.0.3, with ASM. This is just the prototype server, in our conversion from Oracle 11g on AIX without ASM to Oracle 11g on Linux with ASM.
I already have an Oracle VM cluster running, and have built a number of VMs from templates, and all that works fine. Now I'm trying to install ASM, and have failed several times. Maybe I'm doing something fundamentally bad. Here are two questions:
1. Is it true that the only (reasonable) way to install ASM is to install the product called "Grid Infrastructure"? As best I can tell, the answer is "yes". But GI seems to be so much more than ASM, much that I don't think I want or need. Is there an easier way to get ASM?ASM is a feature of Oracle Grid Infrastructure Installation. So you will need Install GI to use ASM.
There is one GI installation wich can be installed and configured in two different way. For a Cluster or For a Standalone.
This Options must be choosen during installation.
The GI installation for a Standalone is called Oracle Restart.
The GI installation for a Cluster is called Oracle Clusterware.
Both option above have the ASM feature.
2. The certification matrix swears that Grid Infrastructure 11.2.0.3 is certified on Oracle Linux 6. Yet (1) I see many posts on OTN and elsewhere on the net that say it is NOT supported, and that there are mant problems in gettng the installation to work, and (2) I have been trying to install on OEL 6, and can't get the installer to complete. Specifically, the root.sh script fails with "ohasd has failed to start...". Before pursuing my installation problems any more, I just want to make sure: Should this install on OEL 6?Many users here on OTN tried to install Grid Infrastructure on RHEL6/OEL6 when it was not certified. So many issues show up.
After it was certified by Oracle there are several notes on MOS that will help you follow important steps for a successful installation.
I think you should use OEL 6, since Oracle Linux 6 was Certified by Oracle Corporation you have all support on this product.
Start with this note : *Master Note of Linux OS Requirements for Database Server [ID 851598.1]*
*Database Client or Database Server Install on Red Hat Enterprise Linux 6 (RHEL6) or Oracle Linux 6 [ID 1350000.1]*
http://levipereira.wordpress.com/2012/04/18/certification-of-the-oracle-database-on-oracle-linux-6-and-red-hat-enterprise-linux-6/

Installing and Configuring the Apache HTTP Server Plug-In

Hi,
I am using WL10.3 in Linux machine.
I have an environment where I have a single WL server in a domain that is deployed with the web-application
And I have another domain where I have two managed servers in a cluster that is deployed with the business.
Now, I want to configure a Apache HTTP server to make it work as a proxy along with the weblogic.
In my current scenario, the stand alone server proxies the req to the cluster and that is defined in a jndi.properties.
Now, what should I do if I want to use the Apache
I have the following questions:
1. Forget about my env, generally how can I install and configure Apache HTTP plug-in?
I see we already having libproxy_61.so file inside /bea/wlserver_10.3/server/plugin/linux/i686
Do i need to install the patch even then as told in http://www.oracle.com/technology/deploy/security/wls-security/2793.html?
2. While am adding the lines in httpd.conf ,
LoadModule weblogic_module modules/mod_wl_22.so
Should I put ibproxy_61.so instead of mod_wl_22.so in this line?
3. Just by configuring the proxy, the session replication and load balancing will be ensured?
4.And for my configuration as stated at the beginning few lines, what can be the best architecture?
Your help is really appreciated.

Hi,
Below blog would give you a clear understanding of the Integrating Apache with Weblogic. All your questions are been answered in the below blog.
http://www.prasannatech.net/2008/07/integrating-apache-tomcat-weblogic.html
You can for sure apply the patch provided in CVE-2008-3257).
Keep posted with your findings and let us know if you need any further clarification.
Regards,
Hussain

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

How to install and configure Business objects on a local Maschine

Hi Experts,
i am a newbi in BO and would like to work with BO.
The first thing i learned was to install and configure BO on my notebook.
I downloaded the followings Tools:
- CR Report 2008
- Integration Kit
- Live office 3.1 Upgrade
- Web Intelligence
- XCelsius
By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload?
1. I would like to know which logic to follow toinstall it.Which one should be the firt and which one the last.
2. Before installing Query as a webservice i should first install:
    - BusinessObjects XI Release 2 SP2 Enterprise Edition
    - Web Services--> What is that and where could i download it?
    - Tomcat or another supported Web Application and JDK--> where can i download it?
3. .What is NET 1.1? Where to download it and how to install it?
Any information or expereince will be very appreciated.
Thank you in advance for your Input.
Pat
Edited by: Gilo on Feb 1, 2009 12:25 AM

Hi Pat,
            You can get the guides and Installtion guides from this
http://help.sap.com/businessobject/product_guides/
You can download the from
.subscribenet.com
you can enter the user name and password then you can download the Business Objects software that can be download.
"By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload? "
Sequence 1-3 you will have to download all the 3 as it can be part 1 part 2 and part 3.
Tomcat .If you are installing for the first time it will automatically install tomcat and JDK if you are connected to the net while installing Business Objects.
Regards
Prashant

What are the prerequisites to install and configure Oracle Coherence 3.4

What are the prerequisites to install and configure an Oracle Coherence (3.4 Grid version) on RHEL5.0 system?
I want to make an Oracle Coherence Gid Data system for testing purpose using 3 machines.
What kind of network configuration is OK?
What software should be installed in advance？
Thank you

Hi,
I would read through the Testing and Tuning section of the following page.
http://coherence.oracle.com/display/COH34UG/Usage+(Full)
Even though you are not about to go into production I think the Production Checklist has some very useful information.
http://coherence.oracle.com/display/COH34UG/Production+Checklist
-Dave

Support validity question about installing and configuring SP13 on same machine as FAST to use both as search engines for SP2010

Similar Messages

Maybe you are looking for