Suppress data/Media Storage

I don't know if this is coincidence, but I started having a data hogging issue ever since my failed attempt at the system update. According to My Data Manager, something called Media Storage has used 69.5 MB in the last 13 days. In previous cycles, this app never even appeared in My Data Manager's list. 15 MB were in a 10-minute period when I was using 1 app that, as far as I know, doesn't use media. Since I was at the beginning of my billing cycle, I pretty much stopped using the mobile internet connection because I didn't want it to happen again. I also decided to install Onavo since it can block apps from using mobile internet.
Today I had to reboot my phone. I didn't even unlock the screen until 20 minutes later, but in that time, the same app (according to My Data Manager) used over 50 MB. (I forgot that 3G comes on automatically when rebooting; it was turned off before I shut down.) Onavo shows the culprit is Market Downloader, and I can't limit it to WiFi only. I don't keep Background Data syncing turned on. As far as I know, I've uninstalled every app that I installed recently (other than Onavo, which was installed after the first data hogging session).
Anyone know what this app is--and whether there's a way to stop it? Or is there a way to prevent my phone from turning on mobile internet when I reboot so I don't have to remember that annoying quirk? I'm almost ready to do a factory reset because I'd rather lose everything I have than pay for a data overage.
Thanks!

Thanks, guys.
CoasterFanFL - yes, I'm confused coz I have an iPhone 4 and upgrading to an iPhone so there is definitely a 3 megapixels difference in the camera and possibly the quality of the video recording as well. If I get an iPhone 5 16GB and I use 2GB for songs, 2GB for applications and 2GB for photos, I wonder how much GB remaining can I use for video recording in terms of minutes. Also, my understanding is that you don't get the full 16GB of data space / storage space when you get the iPhone 5 16GB out of the box. Is this correct ?

Similar Messages

IPhone 5 Data / Media Storage Capacity

I plan to upgrade from an iPhone 4 to 5 but am a bit confused on whether I should get the iPhone 5 16GB, 32GB or 64GB. Based on the new iPhone 5 features, can someone please tell me how many photos, songs and minutes of videos from the iPhone 5 video camera can be stored on a 16GB ? Thanks.

Thanks, guys.
CoasterFanFL - yes, I'm confused coz I have an iPhone 4 and upgrading to an iPhone so there is definitely a 3 megapixels difference in the camera and possibly the quality of the video recording as well. If I get an iPhone 5 16GB and I use 2GB for songs, 2GB for applications and 2GB for photos, I wonder how much GB remaining can I use for video recording in terms of minutes. Also, my understanding is that you don't get the full 16GB of data space / storage space when you get the iPhone 5 16GB out of the box. Is this correct ?

Best solution for media storage

Hi Everyone,
I am looking for suggestions/how-to on the best setup for media storage. We have two editors (and two computers - Mac Pro PowerPC and iMac Intel). We are currently using an internal 500 GB slot on the Mac Pro along with 1 additional external 1.5 TB drive. Then, on our iMac we use a 1.5 TB external drive. We use, for external drives, LaCie.
Here's our problem. We are running out of space. So, what is the best solution for media storage? Should we get a small rack for our external drives from LaCie and daisy chain them? Or, should we get a server? The only problem I have with a server is connection speed...we, most of the time, have a slow connection at our college.
p.s. here is a link to LaCie's website listing a rack...and we have the d2 drives. So, do you daisy chain them or plug each one in individually?
http://www.lacie.com/us/products/product.htm?pid=10172
Any ideas/thoughts/suggestions are greatly appreciated!!
Thanks in advance.
zanm
Message was edited by: zanfardinom

Hi Everyone!
Thank you all for your suggestions. I agree...Drobo looks great, but I am finding more and more bad news when it comes to editing. It looks like a great solution for archiving. I received another solution with great reviews from one of my colleagues contacts. They work for a big company.
Hope this helps...something else to add to the mix.
*Our edit suite storage solution is a Facilis Terrablock 24EX unit. (http://www.facilis2.com/24ex.html) It has 18TB of space and is connected on 4GB Fibre channel to both suites. On top of that we have an Apple X-Serve running Final Cut Server that sorts and catalogs all the video we put in so network users (Mac and PC) can search and look at media from their workstations. We just put this in a few months ago. Before that we had a Rorke Data Galaxy HDX with 6TB of space on a 2GB Fibre Channel connection. ( http://www.rorke.com/av/galaxy-hdx.cfm ) It’s now a backup storage unit. Both systems have excellent performance though, we upgraded mostly for space and the server software.*
Again, thank you all for your help. I will research all suggestions.

In Built Media Storage Problems

Hi there,
Just now out of the blue i received a message "uncaught exception net.rim.vm.Stack Overflow Error" and have now lost everything on my inbuilt media storage. I took my battery out and received a message "built in media storage not accessible due to detective errors. Do you wish to repair now?" I pressed YES and then it gave a message "If lost clusters are found during repairs, do you want to save them?" and I pressed YES again. It tried to repair but failed. I have lost all my photos and music. Is there a way of getting them back? I also have a new 8 gig memory which i have now changed everything to save onto. Please help

Hi Carmen,
Have you recenlty taken backup of your device including in built media storage, if yes then you may restroe your data from there otherwise it would be difficult to recover the lost data.
Further try to boot your handheld by battery pull, while device is powered ON & re-insert battery after a min, then check..!!
Good luck...!!

Internal Media Storage faulty

I have an issue that i hope someone can assist with. My BB Torch 9800 keeps telling me that my Built in media storage is not accesable and has errors. I try to repair but it cant. Please help.

Why can't you? What happens when you make that attempt. what error occurs?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
thanks
larry

I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
Use what you have for a system backup or for secondary backup storage.
you might be able to take the drive - most cases allow you to open and swap drives - and use this:
G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive
or this:
http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

Time Capsule as Itunes Media Storage

I'm thinking about buying a Time capsule, but I want to know if that's what I really need.
1) My main problem is that I can't use my MacBook to hear music, watch movies or sync my Iphone 4 through my apartment 'cause my Library is in an External hard disk that needs electric power to function, so every time that I need to buy/hear music, watch a movie from my MacBook I have to be connected to my External HD. So, if I buy a TC can I sync/stream wirelessly my devices?
2) Also I have an Apple TV and much of the times I buy music/movies/videos from there. If I connect the Apple TV to the TC, My library stills in just one folder in the TC?
3) The TC is always on? or it starts up when a device is trying to connect to it?
Thank you very much in advance...

Please check out the following article to get one author's opinion on using the Time Capsule as a Media Storage device: theAppleBlog: Using Time Capsule as a Media Drive

Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

Under the stock transfer order configuration, there is a IMG step "Define Shipping Data for Storage Location".
In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
The customer number is used a sold-to-party in outbound deliveries.
But I am not able to figure out what's the use of VENDOR number we are specifying in this step.
If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
Also I need to know what vendor account group I will use for creating this storage location vendor. I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
So I need to know-
1. Which account group to use for creating storage location vendor
2. What's the ultimaye use of this vendor code
3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.
Thanks

Hi,
Define Shipping Data
Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
A goods receipt can be planned in the receiving plant.
You can enter a vendor (transport vendor) in the stock transport order
In IMG step "Define Shipping Data for Storage Location".
You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
Rewards If usful
Regards
Sanjay L

No data media can be created for the proposal run - Bacs Payment

Hi,
When i schedule program RFFOGB_T for bacs payment and select proposal run only i get the following error "No data media can be created for the proposal run". But when i execute the program with out selecting the check box " Proposal run only...a file was getting generated...Could any onle pls help me resolve this problem.
With Best Regards,
M.Naveen Kumar

The post has been answered

Control data for storage type is missing Message no. L3006

Dear Mates
i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
Control data for storage type is missing
Message no. L3006
i have explored every thread regarding the same issue and also implemented some measures like
-> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
-> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
but still i am getting the same message in LT03
can you please help me out on this.

Please take a look at the following links and see if they will help at all.
Error on creating a TO - Control data for storage type is missing
"control data for storage type is missing"
Kind Regards,
Jason

"control data for storage type is missing"

Hi Guys
I am trying to create a goods receipt for an inbound delivery.
I created the inbound delivery VL31N - sucessfully
But when trying to create a putaway LT0F - error
control data for storage type is missing. msg no. L3006
Do i maiantain this control data for storage type in the Material master?
is there anything Im doing wrong?
Can someone help please.
Thanks in advance for the help.
Ahmad Yahya

Hi,
Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
Regards,
Prabu

Computer thinks i pod is a data usb storage device

Had to change the i pod into a data retrival. Done this enable disk use. Now i tunes wont find the i pod atall updating etc the module is there but the computer thinks its a usb storage device. I pod under edit prefrences is saying that no i pod conneced. Done a restore on i pod and used the updater. Uninstalled i tunes and installed it again and again. Orange lights and green lights are flashing on my i pod its locked me out of it. Why if ive restored it to factory settings wont it let me use it for music and not data retrival storage. Ive done a add hardware wizard it simply says usb storage device and not i pod which is what it has to be to get music. Ive looked for options on i tunes for the i pod and the icons gone so i cannot untick enable disk use. All usb hubs are working i am at a total loss at what to do please someone help me out thanks mr d roberts

That's exactly what mine said. Tried to uninstall completely and reinstall, and it still didn't work. Apple tech told me to take it to apple service centre. Take a look at my post.
Home > iPod > iPod shuffle > Connecting iPod shuffle to Windows > Can't get shuffle to show up as shuffle and not as xtra disk

Transfer Order : Data for storage type search is not defined (A   )

Dear Experts ,
While trying to use the Transfer Order and trying to determine the storage type this error appears :
Data for storage type search is not defined (A   )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
How ever , I have already configured the search and here is the Storage Type search's data in OMLY
1. Warehouse number : W10
2. Operation : A "Stock Removal"
3. Indicator :   E
4. Stock Category : Blank
5. Special Stock Category : Blank
6. Storage Location Ref :10
7. Storage Type : 10E
Please Advice
Edited by: Sap Sap on Feb 24, 2011 10:54 AM

Hello,
The storage type in which you want to place the material or pick the material from has not been defined in the storage type search sequence.
You need to define the search sequence in customization so that storage type is determined automatically when the transfer order is created;
SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search
In this go to determine search sequence and then
for warehouse number W10, operation as stock removal 'A' and in this maintained the relevant the storage type (10E) so that it is determined automatically.
I hope this helps.
BR,
Tushar

Automatic copy music files in music folder to the data disk storage

I got the shuffle as a Christmas present last year. It was working fine until today. Once I plugged to shuffle onto my laptop, it automatically copy all the music files in my music folder (my hardisk) to my shuffle. It copies them to my data disk storage, as if I want to back up them or transfer them to another computer. I don't know where to change the setting, as it used to work fine and I didn't change anything since then.
Anyone has any idea how to fix this? Basically now I can't use my shuffle as the memory stick.

Yes it is possible, and in fact quite easy.
Insert the flash drive in your computer and open it so it looks like a window. Over in iTunes, highlight the tracks you want (or CTRL+A to get a whole playlist) and drag to the open flash drive window.
If you normally run iTunes in full-scree mode, make it smaller so that you can do the drag.

Data for storage type search is not defined (E FC1 ) in WM module

Hi friends,
I m working in Ware house management.I have created material document and using the matertial document number in LT06.
I am getting the following error while creating transfer order for material document in T-code LT06.
Data for storage type search is not defined (E FC1 )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
Procedure
Contact your system administrator. Note down the values that are within parentheses in the error message.
Please advise me how to solve this error.
Thanks in advance.
Regards,
William

SAP does not know where to put the material.
You usually enable SAP by defining storage type indicators, that you maintain at the putaway and picking indicator fields in material master.
then you setup the storage type search based on this indicators.
SAP can then know in which storage type it shall search for a space to store your material.
As a first step check whether you missed to enter this indicator in your matrial master WM view

Suppress data/Media Storage

Similar Messages

Maybe you are looking for