Suppressing the Bell in Oracle
Hi All,
I need to suppress the bell which sounds when Forms does a database interaction like insert/delete/update.
I am using Forms 4.5 (patch 10) and Oracle 8.0.5
Any ideas ?
Thanks in advance,
A
The alternates are
A.>
In the Oracle Forms 4.5 Designer, select Tools->Options then click on the
Runtime Options tab. Mark the Quiet Mode checkbox.
B.>
In the command line, set the Quiet keyword parameter to YES:
f45run form quiet=YES
Similar Messages
-
How to Suppress The Output of a SQL Query In Oracle 11gR2
Hi Friends,
I am using oracle version 11.2.0.1, I have set a cronjob which will run on every 15 minutes and give us a log file mentioning the execution time taken for that SQL query:-
For example:
SQL> set timing on;
SQL> SELECT objProp FROM aradmin.arschema WHERE (schemaId = 175);
OBJPROP+
--------------------------------------------------------------------------------+
*6\60006\4\0\\60008\40\0\60009\4\0\\60010\4\0\\60018\4\0\\600*
*22\4\68\1\63\AR:jRL#*
Elapsed: 00:00:00.00
The above query will return the output as well as the time taken for execution of the query. I want to suppress the output of the query and only want the time taken to be printed. Is it possible by set commands. I have marked the output as bold and made it Italic.
Please help me at the earliest.
Regards,
Arijit>
I am using oracle version 11.2.0.1, I have set a cronjob which will run on every 15 minutes and give us a log file mentioning the execution time taken for that SQL query:-
The above query will return the output as well as the time taken for execution of the query. I want to suppress the output of the query and only want the time taken to be printed. Is it possible by set commands. I have marked the output as bold and made it Italic.
>
How would that even be useful?
A query from a tool such as sql*plus is STILL going to send the output to the client and the client. You can keep sql*plus from actually displaying the data by setting autotrace to trace only.
But that TIME TAKEN is still going to include the network time it takes to send ALL rows that the query returns across the network.
That time is NOT the same as the actual execution time of the query. So unless you are trying to determine how long it takes to send the data over the network your 'timing' method is rather flawed.
Why don't you tell us WHAT PROBLEM you are trying to solve so we can help you solve it? -
OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as
OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as expected even after the properties are set to Suppress in the report. In Dashboard it is suppressed Properly but in the excel export it is not suppressed and values for the columns are repeated.
Added the following to the instanceconfig :
<Download>
<Export xsi:type="excel">
<DataValue>UseFormattedValue</DataValue>
<RepeatRows>false</RepeatRows>
</Export>
</Download>
But then could not restart services.The following error occured :
Util Logger] Exception occurred:
Severity:1
Type:PKN3saw9ExceptionE
File:saxreader.cpp
Line:681
Message:Sax parser returned an exception.
Message: The prefix 'xsi' has not been mapped to any URI, Entity publicId: /oracle/ofm/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml, Entity systemId: , Line number: 43, Column number: 26
Edited by: 887111 on Mar 27, 2013 11:23 PMProblem solved!!
<br><br>
See this part of the query:
<br><br>
if :P15_GESTOR_PROPIETARI='-3' then<br>
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR ';<br>
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)';<br>
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=<FONT color=red>:P15_CANVI_DE_CLUB</FONT> ';
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))';<br>
end if;<br>
<br>
when instead of :P15_CANVI_DE_CLUB I put a value (say ''EE'') it works correctly, finally I created an application item (ASSOCIAT) and when when I change :P15_CANVI_DE_CLUB I set :ASSOCIAT to the same value and the query is based on this application item:
<br><br>
if :P15_GESTOR_PROPIETARI='-3' then<br>
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR ';<br>
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)';<br>
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=<FONT color=red>:ASSOCIAT </FONT>';<br>
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))';<br>
end if;<br>
<br> -
How to suppress the Forms special message on run time (forms 6i)
Hi,
I am using forms 6i and got the following message on run time. How do I suppress this message on run time? I don�t know the message code of this message, may be it is the prompt or some other type of message.
However I also used the system variable MESSAGE_LEVEL to suppress this message but it did not suppress.
For Example:
:SYSTEM.MESSAGE_LEVEL := '25';
Please send the code to suppress this message.
FORM MESSAGE:
Oracle Forms 6.0
Use the Windows Program Manager to execute operating system commands.
Thanks
AmitDear Frank,
Thanks for reply.As you said I keep the value <NULL> in the Form Module properties palette.But that forms message did not suppress and it still display.The message is:
Oracle Forms 6.0
Use the Windows Program Manager to execute operating system commands
Could you please give me its solution how to avoid that message?
Thanks
AMIT -
SUPPRESSING THE DETAIL RECORDS, URGENT
Hi,
I have a report, which has got three groups , G1,G2 and G3. Now G1 top group, G2 is the next group and G3 the last or the detail.
G1
||
||
G2
||
||
G3
The G1 and G2 has one database column each and some formula columns which is based on the database columns of G3. Now I am suppressing the repeating frame i.e. R_G1 which is based on Group G1 using the format trigger RETURN(FALSE). I am running the report to create a text file. The text file gets created. It Prints all the columns in G1 group, it does not print anything from group G3(as expected). But instead of printing all the columns of group G2, it just prints the DATABASE column of G2. all other summary columns and formula columns are blank. There is no data printed on that. Most surprisingly if I run the same report to the screen instead of file. It prints all the columns of group G2. Is this a bug ? or is there anything going wrong anywhere . Please help me . This is very urgent.
Thanks
FerozHi Feroz
Check the following Repeating Frame Report Properties
(to ensure that formatting is not being suppressed or hidden):
a. Max Records to get:
- Should be set to 0 to allow for all returned rows to be formatted.
b. Base Printing On:
- Should be set to Enclosing Object
c. Print Object On:
- Set to 'default' (Setting to 'All Pages' will definitely cause problems as formatting can never take place in a repeating frame if the nested layers are set to this setting).
d. Print Direction:
- Ensure that this setting is correct for your type of formatting. See HELP>>>INDEX>>>"Print Direction" to understand the variables involved with this setting.
e. Page Protect:
- This should be set to OFF unless there is a specific know formatting
requirement. Protecting a page may disallow formatting to 'spill' into
the next formatted page.
f. Logical Panels:
- Typically not used unless explicitly set. Layouts formatted to page sizes larger than your paper size require Logical Panels set to > 1. Ensure your page size in report properties is set to the physical page size of
your printer. If this is not possible, you may need to implement Logical Panel featured. See >>INDEX>>>"Logical Panels" for complete explanation and understanding before use.
Thanks
The Oracle Reports Team -
What is the Diffrence between Oracle 11 and 11i
What is the Diffrence between Oracle 11 and Oracle11i ?.
With Rgds
Arun J.IsaacOracle 11i is internet based and run with java platform where we can see the applets downloading alongwith oracle forms and it refreshes all the jar files in oracle default directory.
Oracle 11 is not intergrated with Java its an Oracle standalone platform.
Regards,
Arumugam S. -
What is the difference between Oracle and MySQL
Hi,
I would like to know the major difference between Oracle and MySQL. I have a project to generate XML files from database tables, i have used oracle's built XML functions XMLELEMENT, XMLATTRIBUTES, XMLFOREST, XMLAGG. I really want to know if these functions (or) similar functions are supported/availabe in MySQL.
I am having a hard time to find out best linux distro for installing Oracle11g, so i am planning to switch to MySQL. Please help, Thanks in advance.Oracle_Walker wrote:
Hi,
<snip>>
I am having a hard time to find out best linux distro for installing Oracle11g, Then you must be "looking for love in all the wrong places."
What's so hard about finding a "best linux distro for installing Oracle11g"? The supported distros are listed in the fine Installation Guide for Linux. At the top of the list is Oracle's own Oracle Linux, which is in the same family as Red Hat.
so i am planning to switch to MySQL. Please help, Thanks in advance. -
Error :"The provider is not compatible with the version of Oracle client"
Hi guys!
I'm facing this problem:
When my .Net application tries to access the DB, I get this error message above.
The application is into the same machine of DB and the operational system is Windows Server Enterprise 64 bits.
I'm comparing to another machine that has the same scenario but runs in Windows Vista 64 bits. This problem doesn't happen and I can normally access the DB.
The both database versions are 10g Release 2 (10.2) and all components from Oracle Database Components 10.2.0.2.21 are installed as the containing bellow:
-Oracle Data Provider for .NET 1.x 10.2.0.2.20
-Oracle Data Provider for .NET 2.0 10.2.0.2.20
-Oracle Developer Tools for Visual Studio .NET 2003 10.2.0.2.20
-Oracle Developer Tools for Visual Studio 2005 10.2.0.2.20
-Oracle Provider for OLE DB 10.2.0.2.20
-Oracle Objects for OLE 10.2.0.2.20
-Oracle Services For Microsoft Transaction Server 10.2.0.1.0
-Oracle Net 10.2.0.1.0
-Oracle Universal Installer 10.2.0.2.0
Oracle.DataAcces.DLL is 2.102.2.20 and it is reference in my .Net app (that is published and located into IIS).
These are the Oracle assemblies installes in 'C:\Windows\Assembly':
Windows Vista Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Oracle.Management.Omo 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.VsDevTools 2.102.2.20 Neutral 89b483f429c47342 x86
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Windows Server Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHT 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHS 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 ko 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 jp 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
What should I check and do to solve this problems?
Thanks for help,
AndersonHi,
Often the error "The provider is not compatible with the version of Oracle client" is raised when the unmanaged dll OraOpsX.dll can't be found, can't be loaded, or is the wrong version. For version 10.2.0.x of ODP.NET and .NET Framework 2.x the file should be called "OraOps10w.dll" and should be found in the %ORACLE_HOME%\bin directory.
Since the ODAC pieces are installed on the same host as the database, are they in a separate Oracle Home or the same Oracle Home as the database software? If there are multiple Oracle Home directories, which one is in the system path first?
I would start with verifying the version of OraOps10w.dll and the system path on the server. You might also confirm that the Oracle Home directory (and everything under it) has the following permissions for Authenticated Users:
- Read & Execute
- List folder contents
- Read
Regards,
Mark -
The provider is not compatible with the version of Oracle client
We are running Server 2012 64 bit with multiple homes one is 32 bit and the other 64 bit. We installed the 64 bit first then the 32 bit next in order to get our Classic ASP WebSite that is using COM+ and OLEDB to see the provider.
C:\oracle\product\12.1.0\x86
C:\oracle\product\12.1.0\x64
The other Websites are ASP.Net 4.0 and are running in 64 bit application pools. They are using a DAL .Net assembly built x64 with a reference to the 64 bit ODP.Net version 4.121.1.0 in C:\oracle\product\12.1.0\X64\client_1\odp.net\bin\4.
I also see there is another folder C:\oracle\product\12.1.0\X64\odac_1\odp.net\bin\2.x with version 2.121.2.0. We are on running Framework 4.0 but when I switch to this version it works but with the version out of the bid\4 we are receiving the following error when the 64 bit Websites call the assembly:
The provider is not compatible with the version of Oracle client
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Source Error:
Line 87: mDataSource = dataSource
Line 88: mConnectionString = GetDBConnectionString(dataSource)
Line 89: mConnection = New OracleConnection(mConnectionString)
Line 90: mParams = New List(Of IDbDataParameter)
Line 91: End Sub
I have not been successful in getting this to work after spending endless hours, so any help would be appreciated.Hi,
Oracle Client/ODP build with certified Visual C++ Libraries so application using ODP.NET requires "runtime components of Visual C++ Libraries" to be installed.
Oracle Database Client installation includes the Visual C++ Libraries but ODAC doesn't contain these libraries which may cause such issue.
Please check the Note 43208.1 for the particular version of Visual C++ installs with Oracle Database Client installation(e.g. 11.2.0 Database Client installs Visual C++ .NET 2005) and also you can refer the windows event log error massage to verify which version of Visual C++ is missing.
thanks and regards
Venkat -
'The provider is not compatible with the version of Oracle client' exceptio
Hi
I installed ODAC-11.1.0.7.10 Beta on my development system and developed a .net application which uses Oracle.DataAccess.dll to connect to Oracle10g database.
the application is working fine, means opening connection successfully when I run it from my development system. but the same application is throwing
'The provider is not compatible with the version of Oracle client' exception when I run it on my 10g database server system.
what I need to do to run the application successfully on the machine where 10g server exists?
any help is appreciated.
thanks,
harryHi Harry,
I am not sure why you installed 11.1.0.7.10 Beta as 11.1.0.7.20 has been released and you should not be using the beta at this time. That error message is because the dependencies being loaded by the process are the wrong version. When you deploy an ODP .NET application using 11.1.7.x, you need to make sure you deploy it to a machine where the 11.1.0.7.x dependencies are installed. My guess is if I read your poat correctly is that Oracle.DataAccess.dll version 11.1 is loaded but its finding 10.2 dependencies on the target deployment box.
HTH
Jenny -
Print directly to the printer from Oracle 9I
Please it is possible to print directly to the printer from Oracle 9i without having to show the report on the web.
Please it is possible to print directly to the printer from Oracle 9i without having to show the report on the web.
-
How to call a package from the Report in Oracle Application Express
How to call a package from the Report in Oracle Application Express
Hello,
What do you mean? Something like SELECT mypackage.function( par1, par2) from dual?
Or do you want to execute a procedure when something happens on the page, like clicking a button?
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-) -
How to Suppress the POP UP window for Print out Device
Hi All,
I have One ALV Grid report and in this report I want to SUBMIT another report which, when executes gives the POP UP window for Printer Device and sends the output to that device. if we give LOCL, sends output to Spool.
So I want to Suppress that POP UP Window and by default that POP UP window should take 'LOCL' as Printer Device.
Thanks in advance,
Helpful answer get awareded.On the submit command is a spool parameters option.
The addition WITHOUT SPOOL DYNPRO suppresses the print dialog box that is displayed as standard when you use the addition TO SAP-SPOOL.
The addition SPOOL PARAMETERS is used to transfer the print parameters in a pri_params structure that belongs to the data type PRI_PARAMS from the ABAP Dictionary.
PRI_PARAMS-PDEST specificies the output device. -
How to suppress the Acknowledgement Error in IDOC to File scenario?
Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
TirumalHi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy -
Unable to view the image in Oracle Mapbuilder
Hi,
I am unable to view the image using oracle mapviewer.
It stated that:
No spatial data to render...
INFO [oracle.sdovis.CacheMgr2] Spatial Data Cache opened. Region=SDOVIS_DATA.
INFO [oracle.sdovis.CacheMgr2] max_cache_size=32 MB.
INFO [oracle.sdovis.CacheMgr2] sub region sdovis_subreg_ias_spatial_jdbc:oracle:thin:@dbdev:1521:orcl created in cache.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
INFO [oracle.sdovis.DBSRSCache] Loading SRS information from MDSYS.cs_srs (srid=8307).
DEBUG [oracle.sdovis.DBSRSCache] Registering srs 8307, isGeodetic=true, unit=DECIMAL DEGREE
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-8
FINEST [oracle.sdovis.theme.grtp] Theme definition SRID: 8307
FINEST [oracle.sdovis.theme.grtp] Bands: Red - 1 Green - 1 Blue - 1
DEBUG [oracle.sdovis.theme.grtp] [Query] select grt.IMAGE from NYP_IMAGES grt where grt.IMAGE.rasterid = ? and grt.IMAGE.rasterdatatable = ?
ERROR [oracle.sdovis.theme.grtp] java.lang.NullPointerException
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:589)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
ERROR [oracle.sdovis.ltd] Message:GeoRaster load Exception: null
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:855)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-10
FINEST [oracle.sdovis.theme.grtp] Theme definition SRID: 8307
DEBUG [oracle.sdovis.theme.grtp] [Query] select grt.IMAGE from NYP_IMAGES grt where grt.IMAGE.rasterid = ? and grt.IMAGE.rasterdatatable = ?
ERROR [oracle.sdovis.theme.grtp] java.lang.NullPointerException
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:589)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
ERROR [oracle.sdovis.ltd] Message:GeoRaster load Exception: null
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:855)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-12
WARN [oracle.sdovis.theme.grtp] GeoRaster SRID can not be 0.
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-14
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: -Infinity,-Infinity,NaN,NaN
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: SELECT rowid, tb_prv.IMAGE.SPATIALEXTENT, 'dbdev_NYP_IMAGES_render', null, 'null', -1 FROM NYP_IMAGES tb_prv
INFO [oracle.sdovis.CacheMgr2] Creating/replacing a geometry cache group: sdovis_subreg_ias_spatial_jdbc:oracle:thin:@dbdev:1521:orcl : NYP_IMAGES_IMAGE.SPATIALEXTENT_PDT_GEOM.
DEBUG [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ] sql exec time: 16ms, total time loading 1 features: 78ms.
FINEST [oracle.sdovis.MapMaker] mbr of all themes: java.awt.geom.Rectangle2D$Double[x=-330.05,y=-206.35000000000002,w=3308.6025,h=2565.5175]
INFO [oracle.sdovis.DBMapMaker] **** time spent on loading features: 78ms.
FINEST [oracle.sdovis.RE] xfm: 0.15474460805665913 0.0 0.0 -0.15474460805665913 185.0792593502091 365.0684501275084
DEBUG [oracle.sdovis.VectorRenderer] time to render theme NYP_IMAGES with 1 styled features: 16ms
DEBUG [oracle.sdovis.VectorRenderer] time to label theme NYP_IMAGES with 1 styled features: 0ms
INFO [oracle.sdovis.DBMapMaker] **** time spent on rendering: 31ms
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-16
WARN [oracle.sdovis.theme.grtp] GeoRaster SRID can not be 0.
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
FINEST [oracle.sdovis.SRS] *** isGeodetic=true, unit=DECIMAL DEGREE
FINEST [oracle.sdovis.SRS] before adjusting: minX = -1196.0304250629722, maxX=3844.532925062972 minY=-206.3499999999999, maxY=2359.1675 w=5040.563350125944, h=2565.5175
FINEST [oracle.sdovis.SRS] After adjusting: minX = 0.0, maxX=360.0 minY=-90.0, maxY=90.0 w=5040.563350125944, h=2565.5175
WARN [oracle.sdovis.SRS] Resizing query window to be within valid bounds.
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-18
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: 0.0,-90.0,360.0,90.0
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: SELECT rowid, tb_prv.IMAGE.SPATIALEXTENT, 'dbdev_NYP_IMAGES_render', null, 'null', -1 FROM NYP_IMAGES tb_prv WHERE MDSYS.SDO_FILTER(tb_prv.IMAGE.SPATIALEXTENT, MDSYS.SDO_GEOMETRY(2003, 8307, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?, ?, ?, ?)), 'querytype=WINDOW') = 'TRUE'
DEBUG [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ] sql exec time: 859ms, total time loading 1 features: 859ms.
INFO [oracle.sdovis.DBMapMaker] **** time spent on loading features: 859ms.
FINEST [oracle.sdovis.RE] xfm: 2.1666666666666665 0.0 0.0 -2.1666666666666665 0.0 198.5
DEBUG [oracle.sdovis.VectorRenderer] time to render theme NYP_IMAGES with 1 styled features: 16ms
DEBUG [oracle.sdovis.VectorRenderer] time to label theme NYP_IMAGES with 1 styled features: 0ms
INFO [oracle.sdovis.DBMapMaker] **** time spent on rendering: 16ms
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
FINEST [oracle.sdovis.SRS] *** isGeodetic=true, unit=DECIMAL DEGREE
FINEST [oracle.sdovis.SRS] before adjusting: minX = 3.173803526448353, maxX=356.82619647355165 minY=-90.0, maxY=90.0 w=353.6523929471033, h=180.0
FINEST [oracle.sdovis.SRS] After adjusting: minX = 3.173803526448353, maxX=356.82619647355165 minY=-90.0, maxY=90.0 w=353.6523929471033, h=180.0
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-20
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: 3.173803526448353,-90.0,356.82619647355165,90.0
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: SELECT rowid, tb_prv.IMAGE.SPATIALEXTENT, 'dbdev_NYP_IMAGES_render', null, 'null', -1 FROM NYP_IMAGES tb_prv WHERE MDSYS.SDO_FILTER(tb_prv.IMAGE.SPATIALEXTENT, MDSYS.SDO_GEOMETRY(2003, 8307, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?, ?, ?, ?)), 'querytype=WINDOW') = 'TRUE'
DEBUG [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ] sql exec time: 0ms, total time loading 1 features: 0ms.
INFO [oracle.sdovis.DBMapMaker] **** time spent on loading features: 16ms.
FINEST [oracle.sdovis.RE] xfm: 2.2055555555555553 0.0 0.0 -2.2055555555555553 -6.99999999999992 198.50000000000003
DEBUG [oracle.sdovis.VectorRenderer] time to render theme NYP_IMAGES with 1 styled features: 15ms
DEBUG [oracle.sdovis.VectorRenderer] time to label theme NYP_IMAGES with 1 styled features: 0ms
INFO [oracle.sdovis.DBMapMaker] **** time spent on rendering: 31ms
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
FINEST [oracle.sdovis.DBMapMaker] adding predefined theme [name=GEORTHEME]
FINEST [oracle.sdovis.ThemeTable] key_column using default: ROWID
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-22
FINEST [oracle.sdovis.theme.grtp] Theme definition SRID: 8307
FINEST [oracle.sdovis.theme.grtp] Bands: Red - 1 Green - 1 Blue - 1
DEBUG [oracle.sdovis.theme.grtp] [Query] select grt.IMAGE from NYP_IMAGES grt where grt.IMAGE.rasterid = ? and grt.IMAGE.rasterdatatable = ?
ERROR [oracle.sdovis.theme.grtp] java.lang.NullPointerException
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:589)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
ERROR [oracle.sdovis.ltd] Message:GeoRaster load Exception: null
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:855)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-24
WARN [oracle.sdovis.theme.grtp] GeoRaster SRID can not be 0.
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
FINEST [oracle.sdovis.SRS] *** isGeodetic=true, unit=DECIMAL DEGREE
FINEST [oracle.sdovis.SRS] before adjusting: minX = 3.173803526448353, maxX=356.82619647355165 minY=-90.0, maxY=90.0 w=353.6523929471033, h=180.0
FINEST [oracle.sdovis.SRS] After adjusting: minX = 3.173803526448353, maxX=356.82619647355165 minY=-90.0, maxY=90.0 w=353.6523929471033, h=180.0
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-26
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: 3.173803526448353,-90.0,356.82619647355165,90.0
FINEST [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ]: SELECT rowid, tb_prv.IMAGE.SPATIALEXTENT, 'dbdev_NYP_IMAGES_render', null, 'null', -1 FROM NYP_IMAGES tb_prv WHERE MDSYS.SDO_FILTER(tb_prv.IMAGE.SPATIALEXTENT, MDSYS.SDO_GEOMETRY(2003, 8307, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?, ?, ?, ?)), 'querytype=WINDOW') = 'TRUE'
DEBUG [oracle.sdovis.theme.pgtp] [ NYP_IMAGES ] sql exec time: 765ms, total time loading 1 features: 765ms.
INFO [oracle.sdovis.DBMapMaker] **** time spent on loading features: 765ms.
FINEST [oracle.sdovis.RE] xfm: 2.2055555555555553 0.0 0.0 -2.2055555555555553 -6.99999999999992 198.50000000000003
DEBUG [oracle.sdovis.VectorRenderer] time to render theme NYP_IMAGES with 1 styled features: 31ms
DEBUG [oracle.sdovis.VectorRenderer] time to label theme NYP_IMAGES with 1 styled features: 0ms
INFO [oracle.sdovis.DBMapMaker] **** time spent on rendering: 125ms
INFO [oracle.sdovis.DBMapMaker] clearing internal theme list and cache
FINEST [oracle.sdovis.DBMapMaker] adding predefined theme [name=GEORTHEME]
DEBUG [oracle.sdovis.ThemeTable] Got SRID for base table NYP_IMAGES from data source cache
FINEST [oracle.sdovis.ThemeTable] key_column using default: ROWID
DEBUG [oracle.sdovis.ltd] LoadThemeData running thread: Thread-28
FINEST [oracle.sdovis.theme.grtp] Theme definition SRID: 8307
DEBUG [oracle.sdovis.theme.grtp] [Query] select grt.IMAGE from NYP_IMAGES grt where grt.IMAGE.rasterid = ? and grt.IMAGE.rasterdatatable = ?
ERROR [oracle.sdovis.theme.grtp] java.lang.NullPointerException
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:589)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
ERROR [oracle.sdovis.ltd] Message:GeoRaster load Exception: null
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:855)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:90)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:66)
WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
For the image i want to view, the data i got for the image that is being stored in the georaster object are:
IMAGE(RASTERTYPE, SPATIALEXTENT(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELE
SDO_GEORASTER(20001, SDO_GEOMETRY(2003, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 1003,
1), SDO_ORDINATE_ARRAY(-180, -90, -180, 1073, -180, 2237, 1320, 2237, 2821, 223
7, 2821, 1073, 2821, -90, 1320, -90, -180, -90)), 'NYP_IMAGES_RDT', 131, XMLTYPE
(<georasterMetadata xmlns="http://xmlns.oracle.com/spatial/georaster">
<objectI))
May i know whether the image is georeferenced?
If it is successfully georeference, why does it stated that no spatial data to render?
Regards,
EstherIMAGE_ID IMAGE_DESCRIPTION
IMAGE(RASTERTYPE, SPATIALEXTENT(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELE
161 TIFF
SDO_GEORASTER(20001, SDO_GEOMETRY(2003, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 1003,
1), SDO_ORDINATE_ARRAY(-180, -90, -180, 1073, -180, 2237, 1320, 2237, 2821, 223
7, 2821, 1073, 2821, -90, 1320, -90, -180, -90)), 'NYP_IMAGES_RDT', 131, XMLTYPE
(<georasterMetadata xmlns="http://xmlns.oracle.com/spatial/georaster">
<objectInfo>
<rasterType>20001</rasterType>
<isBlank>false</isBlank>
<defaultRed>1</defaultRed>
<defaultGreen>1</defaultGreen>
<defaultBlue>1</defaultBlue>
</objectInfo>
<rasterInfo>
<cellRepresentation>UNDEFINED</cellRepresentation>
<cellDepth>4BIT</cellDepth>
<totalDimensions>2</totalDimensions>
<dimensionSize type="ROW">
<size>2327</size>
</dimensionSize>
<dimensionSize type="COLUMN">
<size>3001</size>
</dimensionSize>
<ULTCoordinate>
<row>0</row>
<column>0</column>
</ULTCoordinate>
<blocking>
<type>REGULAR</type>
<totalRowBlocks>10</totalRowBlocks>
<totalColumnBlocks>12</totalColumnBlocks>
<rowBlockSize>256</rowBlockSize>
<columnBlockSize>256</columnBlockSize>
</blocking>
<interleaving>BIP</interleaving>
<pyramid>
<type>DECREASE</type>
<resampling>NN</resampling>
<maxLevel>3</maxLevel>
</pyramid>
<compression>
<type>NONE</type>
</compression>
</rasterInfo>
<spatialReferenceInfo>
<isReferenced>true</isReferenced>
<isRectified>true</isRectified>
<SRID>82394</SRID>
<spatialResolution dimensionType="X">
<resolution>28.5</resolution>
</spatialResolution>
<spatialResolution dimensionType="Y">
<resolution>28.5</resolution>
</spatialResolution>
<modelCoordinateLocation>UPPERLEFT</modelCoordinateLocation>
<modelType>FunctionalFitting</modelType>
<polynomialModel rowOff="0" columnOff="0" xOff="0" yOff="0" zOff="0" rowScal
e="1" columnScale="1" xScale="1" yScale="1" zScale="1">
<pPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>-479.9329824561403 0 0.03508771929824561</polyno
mialCoefficients>
</pPolynomial>
<qPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</qPolynomial>
<rPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>43256.28210526316 -0.03508771929824561 0</polyno
mialCoefficients>
</rPolynomial>
<sPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</sPolynomial>
</polynomialModel>
</spatialReferenceInfo>
<layerInfo>
<layerDimension>BAND</layerDimension>
<subLayer>
<layerNumber>1</layerNumber>
<layerDimensionOrdinate>0</layerDimensionOrdinate>
<layerID>subLayer1</layerID>
<colorMap>
<colors>
<cell value="0" blue="0" red="0" green="0" alpha="255"/>
<cell value="1" blue="20" red="20" green="20" alpha="255"/>
<cell value="2" blue="36" red="36" green="36" alpha="255"/>
<cell value="3" blue="48" red="48" green="48" alpha="255"/>
<cell value="4" blue="52" red="52" green="52" alpha="255"/>
<cell value="5" blue="72" red="72" green="72" alpha="255"/>
<cell value="6" blue="121" red="121" green="121" alpha="255"/>
<cell value="7" blue="133" red="133" green="133" alpha="255"/>
<cell value="8" blue="153" red="153" green="153" alpha="255"/>
<cell value="9" blue="178" red="178" green="178" alpha="255"/>
<cell value="10" blue="178" red="178" green="186" alpha="255"/>
<cell value="11" blue="186" red="186" green="186" alpha="255"/>
<cell value="12" blue="198" red="198" green="214" alpha="255"/>
<cell value="13" blue="230" red="230" green="234" alpha="255"/>
IMAGE_ID IMAGE_DESCRIPTION
IMAGE(RASTERTYPE, SPATIALEXTENT(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELE
<cell value="14" blue="242" red="242" green="242" alpha="255"/>
<cell value="15" blue="255" red="255" green="255" alpha="255"/>
</colors>
</colorMap>
</subLayer>
</layerInfo>
</georasterMetadata>
Is this being georeferenced?
Maybe you are looking for
-
Non Apple phones no longer working with iMessage
I had to reset iMessage on my iPhone and MacBook Pro in order to get it syncing again properly. I don't know what happened but it just stopped syncing until I reset everything. Now it is working. However, I'm noticing that any non Apple phones are
-
Password protecting a pages doc
Is there any way to password protect a pages doc in the latest version included in iWork 08? Thank you
-
Help! "access denied" to folders in windows 8.1
I never had this problem with XP & it is totally infuriating; why can I access some folders but for instance cannot move a photo from one folder to another & get "access denied" messages. I am no techie but have read advice, looked at folder propert
-
Hi All! I need to send a SmarForm by email as an email body. The SmartForm is a simple plain text form. Does someone know how to do it? Regards, Alejandro.
-
I'm confused. Reading iMovie 08 & iDVD "The missing Manual" it states on page 261, "If you do not already have iLife 06, you can download your free copy from Apple's Web site." Is this fact or fiction? If fact where on Apple's Web site do I fine this