Surcharge for minimumorder value

Hi Gurus,
Q.) How can we levearage surcharge for minimum order value for a material or minimum order value of the orde?
Reawards will be allocated,
Thannx in advance

Hi CP Datt,
In standard system AMIW(Minimum SalesOrdrVal) and AMIZ (Minimum ValueSurchrg)condition type can be used for this purpose. make sure both the conditioin type are in your pricing procedure. We can maintain condition record (in VK11) for AMIW.
Eg. The minimum order value ( AMIW ) is maintained as Rs.500. the customer has placed order for Rs.200. In the order minimum order value (AMIW) is taken as order value. Minimum order value surcharge (AMIZ) of Rs.300 (Rs.500-Rs.200) is charged.
PMIN (Minimum Price) condition type is used for maintaneance of minimumm price for an product. We can maintain condition record (in VK11) for PMIN. even if less price is entered/calculated in the pricing procedure, the system will take this price as selling price.
Eg. The PMIN of an product is set as Rs.1000. If manually somebody tries to enter an lesser value, the system will not consider the lesser value. The system will take Rs.1000 as the price.
Reward points if useful.
Regards
Pradeep

Similar Messages

Display discounts and surcharges for the same vbeln in the same row

hi experts
i have to display one discount and surcharges for one vbeln, posnr and one material,
i have used konv-kschl for condition type and konv-kwert for condition value.
in my output the conditions what i have given for discounts and surcharges its matching and displaying in different lines for the same vbeln and posnr. usually i should get one line of outputfor one vbeln, but iam getting 3 times repeated
(one without discounts, surcharges,
second : same vblen, posnr with discounts,
third : same vblen, posnr for surcharges )
please modify the internal table and conditions below what i have given in my object.
DATA : BEGIN OF it_konv OCCURS 0,
knumv LIKE konv-knumv, "Number of the document condition
kschl LIKE konv-kschl, "Condition type
kwert LIKE konv-kwert, "Condition value
kbetr LIKE konv-kbetr,
kposn LIKE konv-kposn,
discounts LIKE konv-kwert,
surcharges LIKE konv-kwert,
hkunnr LIKE knvh-hkunnr,
kunnr LIKE knvh-kunnr,
END OF it_konv.
LOOP AT it_konv INTO wa_konv.
CASE wa_konv-kschl.
WHEN 'ZD01' OR 'ZD02' OR 'ZD03'.
wa_konv-discounts = wa_konv-kwert.
WHEN 'ZEXP' OR 'ZEXW' OR 'ZCAF' OR 'ZCAP' OR 'ZCAQ'
OR 'ZS01' OR 'ZS02' OR 'ZS03'.
wa_konv-surcharges = wa_konv-kwert.
WHEN OTHERS.
DELETE it_konv WHERE kschl = wa_konv-kschl.
ENDCASE.
MODIFY it_konv FROM wa_konv TRANSPORTING discounts surcharges.
CLEAR wa_konv.
REFRESH wa_konv.
ENDLOOP.
As per one of the abap expert who responded to my query is the following.
DATA : BEGIN OF it_konv OCCURS 0,
knumv LIKE konv-knumv, "Number of the document condition
kschl LIKE konv-kschl, "Condition type
kwert LIKE konv-kwert, "Condition value
kbetr LIKE konv-kbetr,
kposn LIKE konv-kposn,
discounts LIKE konv-kwert,
surcharges LIKE konv-kwert,
hkunnr LIKE knvh-hkunnr,
kunnr LIKE knvh-kunnr,
END OF it_konv.
DATA : BEGIN OF wa_konv OCCURS 0,
kposn LIKE konv-kposn,
discounts LIKE konv-kwert,
surcharges LIKE konv-kwert,
hkunnr LIKE knvh-hkunnr,
kunnr LIKE knvh-kunnr,
END OF wa_konv.
move '1' to it_konv-knumv.
move 'ZD01' to it_konv-kschl.
move '1200' to it_konv-kwert.
move '0010' to it_konv-kposn.
append it_konv.
move '2' to it_konv-knumv.
move 'ZEXP' to it_konv-kschl.
move '1300' to it_konv-kwert.
move '0010' to it_konv-kposn.
append it_konv.
move '3' to it_konv-knumv.
move 'ZEXP' to it_konv-kschl.
move '1400' to it_konv-kwert.
move '0010' to it_konv-kposn.
append it_konv.
LOOP AT it_konv.
MOVE-CORRESPONDING it_konv to wa_konv.
CASE IT_konv-kschl.
WHEN 'ZD01' OR 'ZD02' OR 'ZD03'.
wa_konv-discounts = IT_konv-kwert.
WHEN 'ZEXP' OR 'ZEXW' OR 'ZCAF' OR 'ZCAP' OR 'ZCAQ'
OR 'ZS01' OR 'ZS02' OR 'ZS03'.
wa_konv-surcharges = IT_konv-kwert.
ENDCASE.
COLLECT WA_KONV.
CLEAR wa_konv.
ENDLOOP.
But to try according to the above, i dont have the values for kwert, i know only the condition type (KSCHL). based on this how can i solve my problem
please clarify
thanks in advance

Refer to the suggestion given by Naimesh here Can we modify a sub-total in ALV making use of function GET_GLOBALS_FROM_SLVC_FULLSCR and the method GET_SUBTOTALS. You can see the parameter ep_collect01 refered in case of subtotals. Can you please check ep_collect00 for grand total in your case.
As said about EP_COLLECT00,here goes a classic example Modify grand total in ALV GRID
BR
Keshav
Edited by: Keshav.T on Sep 21, 2011 9:39 AM

How to comment in smartform for text value in abap

how to comment in smartform for text value in abap.
i want to comment text value which is coming in output
From drag and drop option i had dropped an item text in text window and now i dont want to delete it i just want to comment it so can any one help me in commenting the text value.
Advance Thanks for your help

hi
open the text element in the smartform.
on the left corner, we have text editor button.
open that and change the editor (goto-->change editor)
on the new line, give the format as comment line /*. and you can write the comments as required.
such lines doesnt reflect in the output layout.
thanks
pavan

How does APEX check for null values in Text Fields on the forms?

Hello all,
How does APEX check for null values in Text Fields on the forms? This might sound trivial but I have a problem with a PL/SQL Validation that I have written.
I have one select list (P108_CLUSTER_ID) and one Text field (P108_PRIVATE_IP). I made P108_CLUSTER_ID to return null value when nothing is selected and assumed P108_PRIVATE_IP to return null value too when nothign is entered in the text field.
All that I need is to validate if P108_PRIVATE_IP is entered when a P108_CLUSTER_ID is selected. i.e it is mandatory to enter Private IP when a cluster is seelcted and following is my Pl/SQL code
Declare
v_valid boolean;
Begin
IF :P108_CLUSTER_ID is NULL and :P108_PRIVATE_IP is NULL THEN
v_valid := TRUE;
ELSIF :P108_CLUSTER_ID is NOT NULL and :P108_PRIVATE_IP is NOT NULL THEN
v_valid := TRUE;
ELSIF :P108_CLUSTER_ID is NOT NULL and :P108_PRIVATE_IP is NULL THEN
v_valid := FALSE;
ELSIF :P108_CLUSTER_ID is NULL and :P108_PRIVATE_IP is NOT NULL THEN
v_valid := FALSE;
END IF;
return v_valid;
END;
My problem is it is returning FALSE for all the cases.It works fine in SQL Command though..When I tried to Debug and use Firebug, I found that Text fields are not stored a null by default but as empty strings "" . Now I tried modifying my PL/SQL to check Private_IP against an empty string. But doesn't help. Can someone please tell me how I need to proceed.
Thanks

See SQL report for LIKE SEARCH I have just explained how Select list return value works..
Cheers,
Hari

How to check for null values in bpel?? Please Help! very urgent!!!

Hello Guys,
I have a problem. I have an external webservice to which I have to post my request. My task is to create an Webservice and Service Assembly to which others would post request and get response. I have to create SA to deploy onto the bus.
The problem is that there are optional elements in the request and response xsd's. In the Response sometimes certain feilds may come or they may not. for Example:- my response could contain a tag like this <firstName></firstName>
I have to copy these feilds in my bpel process from one variable to another.(like in the mapper).
My Question is , Is there any way in BPEL process or BPEL mapper where I could Check for null values in the request or response???
Your inputs would be very helpful.
Thanks
Rajesh

Thanks for replying man :)
Ok I will be more clear.
Here is a snippet of one of the xsd's that I am using.
<xs:element name="returnUrl" nillable="false" minOccurs="0">
                    <xs:annotation>
                         <xs:documentation>Partner specifies the return URL to which responses need to be sent to, in case of
Async message model.
</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                         <xs:restriction base="xs:anyURI">
                              <xs:maxLength value="300"/>
                              <xs:whiteSpace value="collapse"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
This means that the return URL field can be there or it may not be there. But if it is there it cant be null because nillable=false. But the whole <returnURL> </returnURL> can be there or it may not be there because minOccurs=0.
My requirement is , if returnURL is there in the response with a value, then in my BPEL mapper I should map it else I should not map it.
Thats the issue.
and Yes kiran, the node be non-existant.
So can you please help me with this.
Thanks
Rajesh

Checking for null value in arraylist

Hi
i have an excel file which i i am reading into an arraylist row by row but not necesarrily that all columns in the row mite be filled. So how do i check for null values in the array list.
try
                    int cellCount = 0;
                    int emptyRow = 0;
                    HSSFWorkbook workbook = new HSSFWorkbook(new FileInputStream(file));
                    HSSFSheet sheet = workbook.getSheetAt(0);
                    Iterator rows = sheet.rowIterator();
                    myRow = new ArrayList();
                    int r = 1;
                         while (rows.hasNext())
                              System.out.println("Row # " + r);
                              HSSFRow row = (HSSFRow) rows.next();
                              Iterator cells = row.cellIterator();
                              cellCount = 0;
                              boolean isValid = false;
                              while (cells.hasNext())
                                   HSSFCell cell = (HSSFCell) cells.next();
                                   switch (cell.getCellType())
                                        case HSSFCell.CELL_TYPE_NUMERIC:
                                             double num = cell.getNumericCellValue();
                                             DecimalFormat pattern = new DecimalFormat("###,###,###,###");
                                             NumberFormat testNumberFormat = NumberFormat.getNumberInstance();
                                             String mob = testNumberFormat.format(num);
                                             Number n = null;
                                             try
                                                  n = pattern.parse(mob);
                                             catch ( ParseException e )
                                                  e.printStackTrace();
                                             System.out.println(n);
                                             myRow.add(n);
                                             //myRow.add(String.valueOf(cell.getNumericCellValue()).trim());
                                             //System.out.println("numeric: " +cell.getNumericCellValue());
                                             break;
                                        case HSSFCell.CELL_TYPE_STRING:
                                             myRow.add(cell.getStringCellValue().trim());
                                             System.out.println("string: " + cell.getStringCellValue().trim());
                                             break;
                                        case HSSFCell.CELL_TYPE_BLANK:
                                             myRow.add(" ");
                                             System.out.println("add empty:");
                                             break;
                                   } // end switch
                                   cellCount++;
                              } // end while
                              r++;
                         }// end while
               } myRow is the arrayList i am adding the cells of the excel file to. I have checked for blank spaces in my coding so please help with how to check for the black spaces that has been added to my arraylist.
I have tried checking by looping through the ArrayList and then checking for null values like this
if(myRow.get(i)!=null)
// do something
// i have tried this also
if(myRow.get(i)!="")
//do something
}Edited by: nb123 on Feb 3, 2008 11:23 PM

From your post I see you are using a 3rd party package to access the Excel SpreadSheets, you will have to look in your API for you 3rd party package and see if there is a method that will identify a blank row, if there is and it does not work, then you have to take that problem up with them. I know this is a pain, but it is the price we pay for 3rd party object use.
In the mean time, you can make a workaround by checking every column in your row and seeing if it is null, or perhaps even better: check and see if the trimmed value of each cell has a lenth of 0.

Where to look for all value mappings being used in ID

Hi All,
Where to look for all value mappings being used in ID?
XIer

Hi,
Let me re-frame it, Do u want to know where all the value mappings(created in ID) is used in Mapping Program of IR, isn't it?
If yes, then it's not possible( as far as I know).
raj.

Need to run the report for All Values when Null is passed in parameter

Hi All,
In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
IMP : My Database is SQL Server
where
(table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
I also tried simply
table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
Any suggestions on how can I handle this? Any help would be highly appreciated.
Thanks,
Ronny

thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
also please share the SR number, so i can also check the same.
can there be any other work around to this?
thanks,
ronny

Report is showing "null" string for null values.

hi ,
I am new to BI Publisher and creating a report in BI Publisher. In the result set for null values, report is printing as "null". I checked the query , it gives blank (empty value) data for null values. But in report it is coming as "null" value (string "null"). I require to show the report as blank data for null values. Can you please help me to find solution for this ?.
Thank you very much in advance.
Regards
Gayathri.

it shouldnt happen like that
try these
<?xdoxslt:ifelse(ADDRESS3!='',ADDRESS3,'')?>
or
<?xdoxslt:ifelse(ADDRESS3!='null',ADDRESS3,'')?>
if those didnt work send me your template and xml to my email i can try that at my side .
Email [email protected]

SetSelectedValue for multiple values in List Box

Hi,
I want to set the selectedValue for multiple values in the List Box. If i use setSelectedValue for all the values, it just highlights the last one.
Can anyone tell me how do i highlight multiple values in the List Box?
Scenario:
I have one screen where the List Box and "Go" button is placed. When i select multiple values in the list box and hit "Go" it should display what i have selected in the List Box.
Note: List Box is generated dynamically.
Thanks,
Naresh V

setSelectedValue as the name indicates will set one value and in your case since you are using it multiple times it would pick the last value.
When the user selects multiple values from the list box and clicks on Go you can capture those values in the controller for processing. What are you trying to achieve by resetting all the selected values on the same listbox ?

Full path mapping not working for Taxonomy values

Hi Friends,
I'm trying to update a main table field, which is of type Lookup [Taxonomy]. The taxonomy table has a 5-level hierarchy, with two columns, Code (Display Field 1) and Name (Display Field 2). There are no attributes maintained.
001, A   [Remote Key : 001] <ROOT NODE> {Level 1}
|---000, A1   [Remote Key : 000] {Level 2}
      |---001, A2   [Remote Key : 001] {Level 3}
            |---001000, A3   [Remote Key : 001000] {Level 4}
            |---000102, SYST [Remote Key : 000102] {Level 5}
            |---001001, A4   [Remote Key : 000101] {Level 4}
            |---000102, SYST {Level 5}
|---001, B   [Remote Key : 001] {Level 2}
      |---001, B1   [Remote Key : 001] {Level 3}
            |---001000, B2   [Remote Key : 001000] {Level 4}
            |---000102, SYST {Level 5}
            |---001001, B3   [Remote Key : 000101] {Level 4}
            |---000102, SYST {Level 5}
The figure, unfortunately doesn't come up right, so I've indicated the levels of the nodes.
The remote keys have been maintained at all the levels. I've also set my Configuration Options settings for Hierarchy Values Automap to Fullpath. However, when I try to do an "Automap", the values are being mapped to the wrong leaf node, taking only the leaf node remote key, rather than following the full path. The leaf node value (000102, SYST) repeats multiple times, and the remote key could be maintained only for one of them. But instead of following the hierarchy, the mapping happens to the value for which remote key was maintained, here 001->000->001->001000->000102, no matter what the hierarchy is.
Am I missing something? Any help would be appreciated.
Regards,
Anil Madhavan
Edited by: Anil Madhavan on Jan 20, 2010 8:48 AM
Edited by: Anil Madhavan on Jan 20, 2010 9:25 AM

Hello Anil,
As for Hierarchy field using leaf nodes only for matching - this is the current design and from memory allocation point of view, I think it is reasonable (keeping the full path to the Node will use huge amounts of memory).
they way workaround this is by adding the code field to the matching step, this will allow you to make sure that the currect nodes are being mapped.
Hope this information helps,
Idan

Schedule a Webi XIR2 report to run for all values of the prompt ...

Hi there,
Any ideea about if it's possible to schedule a Web Intelligence XIR2 report to automatically run for all 150 different prompt values in the LOV (and have 150 different instances)?
BOXIR2, Java deployment.
Many thanks.

You'd be scheduling the document 150 different times, each for one value of the LOV.
You'd use the ReportEngine (REBean) SDK to read the LOV values, then use the Enterprise SDK to schedule.
Here's a bit of code that illustrates how to schedule a Webi doc a single time with specified prompts. You'd do something similar, but iterate the prompt setting and scheduling:
    IInfoStore iStore = (IInfoStore) eSession.getService("InfoStore");
    ReportEngine reportEngine = ((ReportEngines) eSession.getService("ReportEngines"))
                                    .getService(ReportEngines.ReportEngineType.WI_REPORT_ENGINE);
    IInfoObjects objs = iStore.query("Select TOP 1 * From CI_INFOOBJECTS Where "
                                      + " SI_KIND='Webi' And SI_INSTANCE=0 "
                                      + " And SI_NAME = '" + reportName + "'");
    //============================================================================
    // Open Webi document, then get and set Prompts collection
    //============================================================================
    IWebi            webi    = (IWebi) objs.get(0);
    DocumentInstance di      = reportEngine.openDocument(webi.getID());
    Prompts          prompts = di.getPrompts();
    for(int i = 0, m = prompts.getCount() ; i < m ; i++) {
        Prompt prompt = prompts.getItem(i);
        String name   = prompt.getName();
        if("Enter value(s) for State:".equals(name)) {
            Lov lov = prompt.getLOV();
            lov.refresh();
            Values values = lov.getAllValues();
            prompt.enterValues(new ValueFromLov[] { values.getValueFromLov(0),
                                                    values.getValueFromLov(1)});
        } else if ("Enter Shop Id:".equals(name)) {
            prompt.enterValues(new String[] { "261" });
    //===========================================================================
    // Copy prompts over to InfoObject
    //===========================================================================
    PromptsUtil.populateWebiPrompts(prompts, webi);
    //===========================================================================
    // Schedule Webi report to run once now
    //===========================================================================
    webi.getWebiFormatOptions().setFormat(IWebiFormatOptions.CeWebiFormat.Webi);
    ISchedulingInfo schedInfo = webi.getSchedulingInfo();
    schedInfo.setRightNow(true);
    schedInfo.setType(CeScheduleType.ONCE);
    iStore.schedule(objs);
Sincerely,
Ted Ueda

While creating PO for Low value assets error

Hi Seniors,
When user creating PO for low value assets ,system throwing error as
u201CMaximum Low value amount exceeded in the case of at least one asset .u201D
Details about this issue:
1.User creating ONE PO for 8 assets as 8 line items, each line item
value below 5,000 only.
2.In this year only they created 8 new asset master records with ref to
Particular asset class(below 5,000) asset class.
3.Non Taxable item P0 (p zero).
Checked:
1. checked at AW01N, no values in each asset.
In configuration:
2. at OAYK   Specify amount for Low value assets,
   Value is 5,000 rs
3. at OAY2 selected option is u201CCheck maximum amount with qtyu201D
I created POu2019S for below 2 options
1   Value based maximum amount check
2   Check maximum amount with quantity
But same error.
Note:
In development server i created some POu2019s like user creating in
Production server but no error in Dev server,
Plz guide me.
Thanks in advance

Hi,
I think you are using a single asset master record in all your line items in the PO.
If you use individual asset master record for each line item in the PO, you issue might solve.
Post again for further queries.
Thanks,
Srinu.

What is the alternative for DisplayMemberPath="Value" for Windows Store applications?

I think there is a bug with Windows Store Applications when it comes to using DisplayMemberPath="Value".
Here is my code
<ComboBox Height="40" VerticalAlignment="Stretch" SelectedValuePath="Key" DisplayMemberPath="Value" x:Name="comboBox1" FontSize="25"/>
var source = new Dictionary<string, double>();
source.Add("Item1", 0.4);
source.Add("Item2", 0.3);
source.Add("Item3", 0.1);
source.Add("Item4", 0.1);
var formateDSource = new Dictionary<string, string>();
foreach (var item in source)
formateDSource.Add(string.Format("[{0}, {1}]", item.Key, item.Value), item.Key);
comboBox1.ItemsSource = source;
If you use this code in WPF in works perfectly. However if you use this code in a Windows Store Application then the Combo Box is empty and an error is thrown. So is there an alternative way to do this in Windows Store Applications and have I unearthed a
bug? Because I have researched the Web for days and found no solution to this.*please do not comment unless you have tried my code as a Windows Store App not a WPF in Visual Studios. Can Someone post an example based on my code that works in Windows Store
Apps please because this is terrible.
Thanks

It looks like you got an answer on SO:
http://stackoverflow.com/questions/29817124/what-is-the-alternative-for-displaymemberpath-value-for-windows-store-applicat
This does look like a bug.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Account Creation - Badi for Default values for BP Role and Sales Area

Hi all,
my requirement regards the possibility to create a new prospect (a link should be available in the navigation bar or create section).
Logically, a bp role as "Prospect" and particoular sales area should be created automatically.
I created an implementation for the BADI definition "BADI_CRM_BP_UIU_DEFAULTS". But don't know how to create the default values for BP role and Sales area:
In my code
assign cr_me->('VIEW') to <lv_view_name>.
if sy-subrc ne 0.
exit.
endif.
lv_viewname = <lv_view_name>.
case lv_viewname.
when 'AccountDetails.htm'.
I obtain the viewname "AccountDetails" , the related context "Header". After I don't know how to proceed to obtain the related entities through the relationship BuilRolesRel and BuilSalesArrangementRel.
Am I following the right way? Is there another solution to prepare the output for default values?
Any kind of suggestion will be appreciated.
Regards, Roberto

go to spro>cross-application components>sap busines partner>business partner> basic settings>field groupings>Configure Field Attributes per BP Role
Double click the business role which you want to customaze (e.g. 'A') and change the proper settings.
Regards.

Surcharge for minimumorder value

Similar Messages

Maybe you are looking for