Suspend to ram works with powersave daemon but resumes on lid open

Is there any way to modify this behavior? I have a T60 and utilizing the powersave daemon my suspend to ram works fine, but I can't find a way to stop it from resuming when I open the lid of my laptop. I am using the stock 2.6.19 kernel.

yea just strange because in XP this behavior doesn't occur, so I figured it wasn't bios related (newb assumption?) i'll look into the above assumptions.
it doesn't bother me all that much, it probably truly only interferes once in a while, but i guess it is a control issue. after all, if you dont have control under linux, then where else would you? haha. especially if winxp is getting the job done. heh
Thanks everyone for hte suggestions.

Similar Messages

Suspend to RAM works but awakes immediately (pm-suspend)

Hello,
After after years of being unable to make suspend to RAM works on my lenovo Y530, I have finally found people who can do it. The trick is simply to add a new rule in /etc/pm/sleep.d/. I will edit the arch wiki page concerning the Y530 if I get it to work, but right now my problem is that the laptop immediately awakes after what seems to be a fully working suspend to RAM. Here is the log of pm-suspend :
Initial commandline parameters:
Wed Dec 29 19:24:32 CET 2010: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux inflames 2.6.36-ARCH #1 SMP PREEMPT Fri Dec 10 20:32:37 CET 2010 x86_64 Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz GenuineIntel GNU/Linux
Module Size Used by
iwlagn 304281 0
cryptd 6262 0
aes_x86_64 7412 2
aes_generic 26170 1 aes_x86_64
loop 15194 2
ipv6 281833 12
usbhid 36325 0
hid 76168 1 usbhid
uvcvideo 61404 0
videodev 64318 1 uvcvideo
v4l1_compat 15578 2 uvcvideo,videodev
v4l2_compat_ioctl32 10212 1 videodev
arc4 1378 2
ecb 2041 2
snd_hda_codec_nvhdmi 14827 1
snd_hda_codec_si3054 3822 1
snd_hda_codec_realtek 275887 1
joydev 10055 0
iwlcore 110506 1 iwlagn
mac80211 196159 2 iwlagn,iwlcore
snd_hda_intel 22285 2
snd_hda_codec 79384 4 snd_hda_codec_nvhdmi,snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6110 1 snd_hda_codec
snd_pcm 71921 3 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec
snd_timer 19265 1 snd_pcm
snd 57562 11 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5969 1 snd
snd_page_alloc 7249 2 snd_hda_intel,snd_pcm
cfg80211 143110 3 iwlagn,iwlcore,mac80211
asus_laptop 14243 0
sparse_keymap 2563 1 asus_laptop
ideapad_acpi 3504 0
rfkill 15882 3 cfg80211,asus_laptop,ideapad_acpi
uhci_hcd 21926 0
sdhci_pci 6664 0
sdhci 16638 1 sdhci_pci
ehci_hcd 36988 0
psmouse 52592 0
mmc_core 59333 1 sdhci
led_class 2331 2 asus_laptop,sdhci
tg3 121889 0
video 19305 0
libphy 17083 1 tg3
output 1940 1 video
usbcore 137570 5 usbhid,uvcvideo,uhci_hcd,ehci_hcd
iTCO_wdt 10669 0
iTCO_vendor_support 1801 1 iTCO_wdt
firewire_ohci 26841 0
firewire_core 49430 1 firewire_ohci
crc_itu_t 1297 1 firewire_core
sg 25652 0
serio_raw 4486 0
pcspkr 1819 0
evdev 8519 14
ext2 63599 2
thermal 12242 0
fan 3274 0
button 4834 0
battery 10231 0
ac 3105 0
cpufreq_conservative 8676 0
cpufreq_userspace 2112 0
cpufreq_powersave 958 0
cpufreq_ondemand 8215 0
acpi_cpufreq 5865 1
freq_table 2323 2 cpufreq_ondemand,acpi_cpufreq
processor 25936 3 acpi_cpufreq
mperf 1243 1 acpi_cpufreq
vboxnetadp 4889 0
vboxnetflt 18948 0
vboxdrv 1760035 2 vboxnetadp,vboxnetflt
fuse 64259 3
nvidia 10081406 41
i2c_core 18726 2 videodev,nvidia
sr_mod 14954 0
cdrom 35851 1 sr_mod
ext4 313574 1
mbcache 5722 2 ext2,ext4
jbd2 69002 1 ext4
crc16 1297 1 ext4
sd_mod 25856 4
ahci 20353 3
libahci 17982 1 ahci
libata 156316 2 ahci,libahci
scsi_mod 124891 4 sg,sr_mod,sd_mod,libata
total used free shared buffers cached
Mem: 2986404 1515468 1470936 0 179156 646152
-/+ buffers/cache: 690160 2296244
Swap: 8755388 0 8755388
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /etc/pm/sleep.d/20_custom-ehci_hcd suspend suspend:
0000:00:1a.70000:00:1d.7
/etc/pm/sleep.d/20_custom-ehci_hcd suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
nVidia binary video drive detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Wed Dec 29 19:24:33 CET 2010: performing suspend
Switching from vt7 to vt1
switching back to vt7
Wed Dec 29 19:24:40 CET 2010: Awake.
Wed Dec 29 19:24:40 CET 2010: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /etc/pm/sleep.d/20_custom-ehci_hcd resume suspend:
0000:00:1a.70000:00:1d.7
/etc/pm/sleep.d/20_custom-ehci_hcd resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Wed Dec 29 19:24:40 CET 2010: Finished.
As you can see, everything works fine, except the fact that the computer awakes 7 seconds after going to sleep... Of course I'm not touching it when it goes to sleep. I've also tried to disconnect everything I could (USB device and wifi).
Is there anyone who have already seen this kind of thing?

Just out of curiosity, are you wired in to a network? I've heard that data transfer over ethernet will trigger the wake-on-lan settings in the BIOS, which would wake it from sleep.

[Solved] Suspend to RAM problems with HP dv7 laptop

Hello,
I have an HP dv7-6000 notebook that I can't get suspend to RAM working on. When I tell Linux to suspend, the screen turns off, I hear the hard disk turn off, but all the lights stay on (power, wireless, and touchpad). After a couple minutes the BIOS kicks in and runs the fans at maximum speed. The only way to get out of this situation is to hold down the power button for a hard shutdown.
It's almost as if the suspend was successful, but "incomplete," because the system for whatever reason is stuck powered on.
I have updated the BIOS and there is no difference. I have also tried different acpi_os_name values based on my DSDT table ("Windows 2001," "Windows 2009," etc.).
Both pm-utils log files (pm-powersave.log and pm-suspend.log) are blank. I have also tried uswsusp, and the same thing happens. I have not tried hibernate yet because I don't have a swap partition.
Some additional hardware information:
> lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] (rev ff)
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 06)
0d:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]
13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
19:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
Not sure where to go from here, any tips?
Last edited by rman (2013-08-16 21:20:53)

+1, I'm having the same issue with both "pm-suspend" and "sytemctl suspend", not always but happening 1 out of 5 times maybe, this started happening since the 3.10* upgrade, currently running 3.10.5-1 on my modest compaq.
> lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310]
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
07:00.0 Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
Regards

Suspend to RAM works only 1-3 times

Hi!
PC configuration:
MSI E350IA-E45 (AMD Fusion E-350 Zacate), 2Gb RAM, 500Gb HDD, Arch x86_64.
# uname -a
Linux xbmc-pc 3.0.0-rc6-mainline #1 SMP PREEMPT Fri Jul 8 07:58:00 NOVST 2011 x86_64 AMD E-350 Processor AuthenticAMD GNU/Linux
I am trying to get suspend to ram working. When suspending the machine second or third time it hangs with black screen an green power led. I need to unplug the power cord and back it again to bring the machine back up.
I tried 2.6.38, 2.6.39 and now 3.0-rc6 kernel, but without success. The unbinding usb-ports and unloading sound, video, network modules does not help.
Also I have debugged DSDT table and replace it with grub2 at boot.
The bios for mb is the latest version.
lspci -Q -vv
dmesg
kernel.log
pm-suspend.log
The logs are for one one successful suspend and one unsuccessful.
Any help will be appreciated.

Bump

What RAM works with KT3 Ultra (Orig) ????

Hey there,
SORRY BIGDADDY. Come to find out a new board
did not fix the prob I am having probs with the OS. Not
only that but several other programs don't work
like burning software, drivers, and the new DX won't
even install right. I figured NEW CPU...but as you can
see I need NEW RAM. So instead of buying PC133 for
almost the same price I figure get some DDR 2100 for
about $10-20 more and the KT3 is $10 more. Do the
math here and I could substantially increase my comp
considerably. :D
Foreveryone out there I need to know what ram works
with the KT3 Ultra. I know this board is very picking
about ram since the AMI bios is the issue.
I am looking at these:
1) Kingston PC2100
2) Crucial PC2100
3) Micron PC2100
Thanks in advance for any replies
SladeZero980
I also got a XP 1600 + for $66 from NEWEGG

OK I found a few minidumps in the event log
The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xde1d3ee0, 0x00000000, 0x804eef61, 0x00000000)
Error code 10000050, parameter1 e262ca7a, parameter2 00000001, parameter3 8053cb3e, parameter4 00000001.
Error code 1000008e, parameter1 c0000005, parameter2 8053cbb1, parameter3 ee5b1a40, parameter4 00000000.
The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xe1fe9a18, 0x00000000, 0x8053cbb1, 0x00000001). A dump was saved in: C:WINDOWSMinidumpMini030703-10.dmp.
Hope these help

Will Kingston's HyperX RAM work with my Mac?

I want to know if the Kingston HyperX RAM work with my Mid-2010 2.4GHz 15" MBP?
The 8GB version with this name: KHX1600C9S3K2/8GX
http://www.kingston.com/hyperx/products/khx_sodimm.asp
Also, what is the biggest capacity USB 3.0 Flash stick there is?

The only products on that page that meet the specifications for your MBP have been discontinued. Don't buy any of the others. Use only RAM that has the specifications Apple recommends. You will gain no benefit and may experience instability and unreliability if you use faster RAM than is recommended. It should clock down and work, but it doesn't always. And of course you'll pay extra for it.
As for USB3 flash drives, is 256GB big enough?
http://www.amazon.com/Super-Talent-SuperCrypt-Flash-ST3U56SPS/dp/tech-data/B003S E6E00
Message was edited by: eww

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

Isight works with photo booth but not in ichat or google talk or skype?

isight works with photo booth but not in ichat or google talk or skype?

Hi
Is this an Internal or External iSight ?
In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
If it reads Audio open the Connection Doctor from that same menu.
In the connection Doctor open the Capabilities tab
Does it say your Internet Connection is too slow ?
At this point I would need to know which iChat Version.
However also look in the View Menu.
Is Show VIdeo Status ticked ? (this shows green Icons next to your Buddy Pic and those of your Buddies
Next go to the iChat Menu > Preferences > Video Section
Do you see a preview here ?
Re: GoogleTalk
Have you enabled TALK on your Google Account Settings ?
You need to have a Google Mail ID (Not any other sort of Google ID)
Have you downloaded the Intel only Web Browser Plug-in to do Video in a Web Browser.
10:48 PM Tuesday; August 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My firewire port works with ext hd but not with audio interface

2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
This is not, neccessarily, an Apple issue.

TS3510 I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?

I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?

I spoke with Apple Support this morning and they believe anything MobileMe related is due to the conversion over to iCloud that's taking place.
As for other email clients, check with your host to see if settings have changed on their end. I use inmotionhosting.com and over the weekend the updated their outgoing requirements so that a password authentication is now needed.
Hope that helps get some on the right path to resolving their issues!

Enterprise Mgr works with one db but not the other

Hi
We have two Oracle 10g databases installed. Enterprise Manager works with the second, but not the first. I believe the problem started when we migrated the host server to another network domain. Everything else works fine, but I'm getting a page load failure when attempting to access enterprise mgr.
The second db was installed after the migration and EM works fine.
Can anyone tell me how to reconfigure this?
Thank you

by any change hostname or ip was changed during migration
also can u paste the emoms.trc ?

Google drive does not work with specific group but works with all users group!!

Hi,
Why Google drive does not work with specific group but works with all users group?
My rule : Internal > external > all users = works fine
But
Internal > external > A group = not working !!

Hi,
if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
http://technet.microsoft.com/en-us/library/bb794762.aspx
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

Hi,
Any one have this issue?
HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
This issue was found in my replacement motherboard. the original mother do not have this issue.
The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
Appreciate any one can provide clue for resolving the problem.
I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50)

@wheng
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

I have a canon multifunction printer that used to work with snow leopard but since I updated to mountain lion my printer stop working, How do I make it work again?

I have a canon multifunction printer that used to work with snow leopard but since I updated to mountain lion it stoped working. How do I make it work again?

This problem is not unheard of when upgrading from Snow Leopard. It is usually solved by completely deleting the existing printer in System Preferences > Print & Scan, and adding it again.

Suspend to ram works with powersave daemon but resumes on lid open

Similar Messages

Maybe you are looking for