[svn:bz-4.0.0_fixes] 20874: Change default max object nest level to 512.
Revision: 20874
Revision: 20874
Author: [email protected]
Date: 2011-03-16 06:55:37 -0700 (Wed, 16 Mar 2011)
Log Message:
Change default max object nest level to 512. A max object nest level of 512 should be more than enough for most applications which probably will not be sending deeply nested object graphs over the wire. For applications that are sending deeply nested object graphs over the wire and that bump up against this limit, the limit can be increased but you should also do testing to make sure that serializing/deserializing these deeply nested object graphs doesn't cause stack overflow errors.
Add documentation for the max object nest level setting.
Add documentation for the max collection nest level setting.
Remove max-string-length-bytes setting from the example services-config.xml as this setting doesn't exist.
Checkintests: passed
Modified Paths:
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.j ava
blazeds/branches/4.0.0_fixes/resources/config/services-config.xml
Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
Similar Messages
-
Revision: 20876
Revision: 20876
Author: [email protected]
Date: 2011-03-16 09:02:36 -0700 (Wed, 16 Mar 2011)
Log Message:
Change default max object nest level to 512. A max object nest level of 512 should be more than enough for most applications which probably will not be sending deeply nested object graphs over the wire. For applications that are sending deeply nested object graphs over the wire and that bump up against this limit, the limit can be increased but you should also do testing to make sure that serializing/deserializing these deeply nested object graphs doesn't cause stack overflow errors.
Add documentation for the max object nest level setting.
Add documentation for the max collection nest level setting.
Checkintests: passed
Modified Paths:
blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java
blazeds/branches/3.x/resources/config/services-config.xmlRemember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
Revision: 20928
Revision: 20928
Author: [email protected]
Date: 2011-03-21 07:02:01 -0700 (Mon, 21 Mar 2011)
Log Message:
Needed to change maxObjectNestLevel in SerializationContext.java to 512 to change the default max object nest level from 1024 to 512.
Modified Paths:
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/SerializationContext.javaHi Diego,
i have a question.
i know that we need SRM 4.0 installation on WAS and ITS to be installed.
my question to you is....
do we need to install EBP separately if we have already installed SRM 4.0 ( in other words is EBP part of SRM 4.0 installation or is it separate)
and for ITS i am running WAS 6.4 and i know that ITS is an integral part of it so how do we activate ITS for SRM 4.0
Thanks a lot in advance
Harish -
Revision: 20609
Revision: 20609
Author: [email protected]
Date: 2011-03-04 10:23:41 -0800 (Fri, 04 Mar 2011)
Log Message:
Change the default max object nest level from 1024 to 512. A max object nest level of 512 should be more than enough for most applications which probably will not be sending deeply nested object graphs over the wire. For applications that are sending deeply nested object graphs over the wire and that bump up against this limit, the limit can be increased but you should also do testing to make sure that serializing/deserializing these deeply nested object graphs doesn't cause stack overflow errors.
Update documentation for the max object nest level setting to reflect the new default.
Add documentation for the new max collection nest level setting.
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.java
blazeds/trunk/resources/config/services-config.xmlYou should be able to get some more precise information from your Xorg logs, but I would bet it is related to the evdev driver. Some of the options in your xorg.conf no longer work with the latest version. For now you should be able to either map your mouse directly to the appropriate /dev/event* entry or change to the standard mouse driver, both of those methods should be in the wiki.
You are supposed to be able to use the evdev driver without the input section of your xorg.conf by using dbus/hal autodetection, but AFAIK at the moment the xorg-server package still isn't compiled with hal support, so you would have to patch and rebuild the package. -
Revision: 20927
Revision: 20927
Author: [email protected]
Date: 2011-03-20 11:48:41 -0700 (Sun, 20 Mar 2011)
Log Message:
Didn't realize I also needed to modify SerialContext.java in addition to AbstractEndpoint.java to change the default max object nest level. Change maxObjectNestLevel in SerializationContext.java to 512 to change the default max object nest level from 1024 to 512.
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/io/SerializationContext.javaAs the server.xml is big enough, I took the minimum portion of it. Hope u can proceed with it.
<!-- Tomcat Root Context -->
<Context path="" docBase="ROOT" debug="0"/>
<!-- New contexts -->
<Context path="/xyz" docBase="pathTo_xyz" debug="0" crossContext="true"/>
<Context path="/pqr" docBase="pathTo_pqr" debug="0" crossContext="true"/>
<!-- Tomcat Examples Context -->
<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
You should also provide a WEB-INF folder under pqr or xyz folder.
You should also provide a web.xml file under each WEB-INF folder.
The minimal web.xml is
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/j2ee/dtd/web-app_2_3.dtd">
<web-app>
</web-app>
That's it. Try it out. Hope it is OK.
Hafizur Rahman
SCJP -
Revision: 20451
Revision: 20451
Author: [email protected]
Date: 2011-02-24 08:33:31 -0800 (Thu, 24 Feb 2011)
Log Message:
backporting bug fix BLZ-570/BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml. This needs documentation. Checkintests pass
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-570
http://bugs.adobe.com/jira/browse/BLZ-620
Modified Paths:
blazeds/branches/4.0.0_fixes/modules/common/src/flex/messaging/errors.properties
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.j ava
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/SerializationContext.java
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/Amf0Input.java
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/Amf3Input.java
blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/AmfIO.javaDear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav -
Revision: 20443
Revision: 20443
Author: [email protected]
Date: 2011-02-23 21:19:22 -0800 (Wed, 23 Feb 2011)
Log Message:
back porting bug fix BLZ-570/BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml. This needs documentation. Checkintests pass
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-570
http://bugs.adobe.com/jira/browse/BLZ-620
Modified Paths:
blazeds/branches/3.x/modules/common/src/java/flex/messaging/errors.properties
blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java
blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/SerializationContext.java
blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/Amf0Input.java
blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/Amf3Input.java
blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/AmfIO.java -
Revision: 18928
Revision: 18928
Author: [email protected]
Date: 2010-12-01 14:16:56 -0800 (Wed, 01 Dec 2010)
Log Message:
fixing the sample service-config.xml for max-object-nest-level setting
Modified Paths:
blazeds/trunk/resources/config/services-config.xmlyou have your driver jar in Tomcat\common\lib?
if so, check your classpath, it could be that. -
Revision: 10868
Author: [email protected]
Date: 2009-10-05 11:05:50 -0700 (Mon, 05 Oct 2009)
Log Message:
change default value of selectable in ASDoc comment to true
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - checkintests
Is noteworthy for integration: No
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/controls/TextArea.asThank you much for your response.
I tried that and it did work. But my requirement is to have a user input the date. The basic idea is if the user decides on a predefined time range like Day Shift Today or Yesterday and so on... then the report would automatically calculate the values based on predefined date time values. On the other hand, if the intent is to run the report for an arbitrary period then the user supplies the date and time limits.
What I am trying to achieve is have the same parameter available for user input , but when the User decides he wants Predefined then the "textbox" populates with date and time as per his choice of predefind range.
I understand that by this the user can still overwrite the date and time on the text box, but the report will run the predefined values as long as he has the @PredefinedDateSelection Set to true.
Is there a way I can impement this?
Once again I thank you and appreciate your input. -
Revision: 10269
Author: [email protected]
Date: 2009-09-15 10:46:10 -0700 (Tue, 15 Sep 2009)
Log Message:
Changing default for -enable-runtime-design-layers to true. The flag may still be used to disable processing of design layer instances if so desired.
QE notes: None
Doc notes: None
Bugs: SDK-23238
Reviewer: Paul
Tests run: Checkin
Is noteworthy for integration: Yes, runtime design layers are now enabled by default.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-23238
Modified Paths:
flex/sdk/trunk/frameworks/tests/basicTests/BasicTests-config.xml
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/CompilerConfiguration.javaAPDivs are a thing of the past and is bad practice. You need a working knowledge of CSS to get a modern looking layout and to do justice to your design which looks great btw.
One out-of-the-box solution is to use Bootstrap - http://twitter.github.com/bootstrap/index.html and use the pre-defined classes/ grids to layout your content. -
Revision: 7125
Author: [email protected]
Date: 2009-05-20 04:12:27 -0700 (Wed, 20 May 2009)
Log Message:
Change default columnGap from 0 to 20 to match Vellum's default.
QA Notes:
Doc Notes:
Bugs: SDK-18095
Reviewers: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18095
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/defaults.cssRevision: 7125
Author: [email protected]
Date: 2009-05-20 04:12:27 -0700 (Wed, 20 May 2009)
Log Message:
Change default columnGap from 0 to 20 to match Vellum's default.
QA Notes:
Doc Notes:
Bugs: SDK-18095
Reviewers: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18095
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/defaults.css -
Revision: 9778
Author: [email protected]
Date: 2009-08-28 17:16:26 -0700 (Fri, 28 Aug 2009)
Log Message:
Change default creationPolicy for NavigatorContent to null. If null, NavigatorContent will check its parent Navigator's creationPolicy. If the parent Navigator's creationPolicy is "all", NavigatorContent will use "all" and create all of its children. Otherwise, NavigatorContent will use "none" as the creationPolicy.
QE Notes: default value for creationPolicy is null
Doc Notes: default value for creationPolicy is null
Bugs: None
Reviewer: Ryan
API Change: No
Is noteworthy for integration: No
tests: checkintests
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/NavigatorContent.as -
How to change default unit on Database 11g
Hi All
I'm using Oracle Database 11g Enterprise Edition Release 11.1.0.6.0.
If I define my column:
USERID VACHAR2(8) --> Default USERID VACHAR2(8 BYTE)
How can I change default unit BYTE to CHAR as the following
USERID VACHAR2(8) --> Default USERID VACHAR(8 CHAR)
Thanks alot
Thiensu2810I have set Database system with the following SQL:
alter system set nls_length_semantics=char;
alter session set nls_length_semantics=char;
But, It does not match.
And when I insert data, the following error occured.
SQL> insert into binhtest values('初期化パ');
ORA-12899: value too large for column string (actual: 12, maximum: 8)
I've checked value of NLS_LENGTH_SEMANTICS, it is CHAR
SQL>SHOW PARAMETER NLS_LENGTH;
NAME | TYPE | VALUE
NLS_LENGTH_SEMANTICS | String -
How to change default FCoE QoS class - Nexus 5020
I see that on a Nexus 5020, the default FCoE QoS class is 50%. I am not using FCoE so I would like to adjust this value to 0%. I switch complains and says I can't change default values. How should I go about getting around this to eliminate the FCoE queue and give 100% BW to default? Thanks.
No. The default classloader is a builtin classloader in
the JRE. You can use other classloaders.
The java.net.URLClassLoader is provided in
the JDK. That's the only one. Otherwise you
should subclass ClassLoader and implement
the loadClass method (f.i.
loadClass("my.program") {
String file="my.program".replace('.','/') + ".class";
// find the file in classpath
// read the class file in a byte[]
return defineClass(byte[]);
although this is not the advised way to do it. Search the web for how to implement a classloader directly. -
How to change default thresholds for some metrics of all targets.
Hi!
We have a lot of servers which have to work hard.
So, our OEM very often generates messages like these:
"EM Alert: Critical:dbsora90.tsb.kz - CPU Utilization is 99.95%, crossed warning (80) or critical (95) threshold."
"EM Alert: Critical:dbsora94.tsb.kz - Disk Device c8t60A9800043346C384C344A4A63516D6Ad0(ssd4) is 99.7% busy."
"EM Alert: Critical:dbsora94.tsb.kz - CPU Load (Run Queue Length averaged over 5 minutes) is 20.78, crossed warning (10) or critical (20) threshold."
I need to change default tresholds for mentioned metrics but I can't their defenition in SYSMAN.MGMT_*-tables or suitable settings in OEM GUI.
And I have no time to edit treshholds manually for each target. )Modification of Metric Thresholds (as this is what you are referring to), should be done using the Metrics and Policy Settings link (to be found in the Target Home page).
Don't mess around with the SYSMAN tables!
Best thing to do here is to start using Monitoring Templates for this.
Check:
Oracle® Enterprise Manager Concepts
11g Release 11.1.0.1
http://download.oracle.com/docs/cd/E11857_01/em.111/e11982/toc.htm
Regards
Rob
http://oemgc.wordpress.com
Maybe you are looking for
-
New Marvell (beta) Controller Driver is Released - but not for MSI?
I've been following the Marvell controller situation pretty closely the past week or so because of the BSOD it's been causing on my board. ASUS has just posted a new Marvell driver for the 91XX, which is on the XPower (88SE9128) and I assume many oth
-
Wish to create folder to put common apps together
-
// AS2 code this.firstChild.childNodes; What does "this" object mean and what would be conversion on AS3 .
-
Emailing a swf or linking to from an email
Hi, probably missing something really stoopid here - I need to send an email to a large mailing list giving them a link, which when clicked will open up a swf which streams an .flv video file. I'd like the .swf to be a fixed size - and NOT resizabe,
-
Set label colour to files in loop.
This Script works in part to open a folder select the image to create a text document of the files, at the same time I would like to label them as red. set myFile to (Macintosh HD:Users:Matt:Desktop: SelectedImages.txt") open for access file myFile w