SVN issue with SDDM 4 Production

Scenario
1. Developer 1 checks out a design.
2. Dev1 modifies the design and saves it to SVN
3. Developer 2 checks out same design
4. Dev 2 opens the design - no changes
5. Dev1 makes a changes and saves it.
6. Dev2 makes a changes and tries to save it but gets this error:
commit -m "" -N C:/Users/myuser/Documents/Data Models/SVN1.8Test_SDDM4/G2_0/G2 Model/rel/F1E78EA1-258D9CBDB1C1/subviews/EC925CC3-4C4A-4937-1A7C-41FB69B585FE.xml
    Sending C:/Users/myuser/Documents/Data Models/SVN1.8Test_SDDM4/G2_0/G2 Model/rel/F1E78EA1-258D9CBDB1C1/subviews/EC925CC3-4C4A-4937-1A7C-41FB69B585FE.xml
    Skipped
    svn: E160024: Commit failed (details follow): svn: E160024: File or directory 'EC925CC3-4C4A-4937-1A7C-41FB69B585FE.xml' is out of date; try updating svn: E160024: resource out of date; try updating svn: E175002: CHECKOUT of '/svn/EDW/!svn/ver/109/trunk/G2/G2%20Model/rel/F1E78EA1-258D9CBDB1C1/subviews/EC925CC3-4C4A-4937-1A7C-41FB69B585FE.xml': 409 Conflict (https://xxxx.ourURL.com)
I know Dev1 changed the model first, (so Dev2 is "out of date") so I refresh Incoming Changes expecting to see a few, but I get Zero changes.
So now what?

I just tested this again with a much smaller model and got the same result.
I need to clarify the order though:
1. Developer 1 checks out and opens a design.
2. Developer 2 checks out and opens same design
3. Dev1 modifies the design (makes a few columns mandatory in one table) and saves it to SVN
4. Dev2 makes a changes and tries to save it but gets this error:
commit -m "" -N C:/Users/myuser/Documents/Data Models/SVN1.8Test_SDDM4/G2_0/G2 Model/rel/F1E78EA1-258D9CBDB1C1/subviews/EC925CC3-4C4A-4937-1A7C-41FB69B585FE.xml
    Sending C:/Users/myuser/Documents/Data Models/SVN1.8Test_SDDM4/G2_0/G2 Model/rel/F1E78EA1-258D9CBDB1C1/subviews/EC925CC3-4C4A-4937-1A7C-41FB69B585FE.xml
    Skipped
    svn: E160024: Commit failed (details follow): svn: E160024: File or directory 'EC925CC3-4C4A-4937-1A7C-41FB69B585FE.xml' is out of date; try updating svn: E160024: resource out of date; try updating svn: E175002: CHECKOUT of '/svn/EDW/!svn/ver/109/trunk/G2/G2%20Model/rel/F1E78EA1-258D9CBDB1C1/subviews/EC925CC3-4C4A-4937-1A7C-41FB69B585FE.xml': 409 Conflict (https://xxxx.ourURL.com)
In my 2nd test case before Dev2 made a change (#4), we tried to do the refresh incoming but again saw Zero incoming changes (which is clearly wrong).
Am I doing something in the wrong order or missing a step (basically trying to replicate the process from Sue's old video)

Similar Messages

Issue with printing production order after changes through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi Shiva,
Refer SAP note 28887.
Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
Please search /google before posting queries.
Regards,
SuryaD.

CPU Issues with music production. LOGIC 8

CPU Issues with music production.
Hey guys. I bet this sort of question has been asked so many times, but i really have spent a long time searching google to get an answer. I have had no luck. I found many things on the subject, but nothing about this exact situation.
Okay, I have a Macbook 4.1 which has 2gb of ram, 2.1 GHz Intel core 2 duo processor, and a 111 gb HD with a rpm of 5400.
I have been having major CPU overloads whilst using Logic 8, And it is much worse when using Pro Tools 7.2 M-Powered.
Now, im not that knowledgeable with computer stuff, but I have a plan.
Im about to upgrade my ram to 4gb, and im getting a new hard drive that will be 320 gb and will be 7200 rpm and 16gb cache (whatever that means).
I believe that having a hard drive at 7200 rpm is pretty essential for music programs like these.
Now hopefully this will help me with the CPU, as i have found out I cant upgrade the processor as its soldered on.
Will this machine be able to handle Logic Pro 8 after the mod??
The real question i guess is: Is a "2.1 GHz Intel Core 2 Duo" processor enough to happily run logic 8?
P.S I will not be recording audio. I use the synths etc included.
Thanks in advance guys.

Alexander Farrar wrote:
Okay, I have a Macbook 4.1 which has 2gb of ram, 2.1 GHz Intel core 2 duo processor, and a 111 gb HD with a rpm of 5400.
111Gigs is a small disk
How much free space in your system disk?
when a disk contain files from over than 80% and only about 20% is free the speed of the hard drive goes down... some disk can loose more than 50% of fast addressing speed
Leopard require at least 50GB free space for run without problem!
for better performance up to 1/3 of the disk size should be required...
I have been having major CPU overloads whilst using Logic 8, And it is much worse when using Pro Tools 7.2 M-Powered.
you use Logic with a Digidesign Drivers?
try to disconnect the Digi device and use Internal Audio of your Mac...
maybe only that can solve your issue.
Im about to upgrade my ram to 4gb, and im getting a new hard drive that will be 320 gb and will be 7200 rpm and 16gb cache (whatever that means).
buying a 320GB at 7200?
I suggest you a 500GB at 5400 RPM
the 7200 Hard drive are not so good for stay inside Macbook chassis
the working temperature in a 7200 RPM disk should be cause slower speed than a more cool/fresh 5400 RPM
The temperature rise up if disk is full over than 1/3 of its capabilities...
(this rules are related with Disk performance but can be affected also CPU power in the real time processing because the system run on the same disk)
The hard drive temperature is strictly related with disk speed performance
and logic use a lot of streaming from to disc access for the EXS24 virtual memory and other Instruments and Synths...
*this can be the primary cause of CPU spikes*
I believe that having a hard drive at 7200 rpm is pretty essential for music programs like these.
I suggest a 500GB 5400 RPM!
G

Network issues with Apple products?

I've got a weird issue with my Apple products connecting to certain networks. Two different instances:
1) My parents house, my iPhone, iPad, and MacBook Pro all have issues in contacting certain sites and apps. Things from google or apple servers wont work. Some things do, if I VPN to an outside network, everything works perfectly fine. I haven't been able to figure out what the root of the issue is. I've switched routers and contacted the network provider but they said it wasn't there fault. This has been going on for a bit. All non-Apple products seem to be fine.
2) My office, I know even less details about the network here, but I'm having a similar issue where my Apple devices get connectivity for a bit then stop and then come back later. If I VPN again, everything works perfectly fine. All non-Apple products work fine.
Anyone have any idea as to what this could be from?

I am having the same problem since upgrading to Snow Leopard. Really need an update from Apple or a solution. Been reading a lot of posts on several discussion boards but nobody has come up with a solution yet. Apple really needs to send us a fix for this. I understand it is also hapenning in Lion.

Wireless connection issue with Apple product

Hi, This is Daniel Jung here.
I got a very strange happening with apple product.
Recently, I created one more SSID assign with particular dynamic interface, the problem is only Apple mobile product is not able to join. but Android and laptop are working very well.
I also tried to find out some solution like enable fast SSID switching, turn off and on for mobile device, re-configuring interface and WLAN, checking error log but there was nothing.
For your information, our WLC model is AIR-CT5508-K9 with 7.3.112.0 version.
Could you share information & solution if any one has?
Thank you.
Regards,
Daniel Jung Yoonho

Dear, Freerk.
Thank you for your information.
I'd like to try captive bypass function then look at the traffic flow to understand very well, however, it looks like required reboot the controller.
ours is not able to do rebooting process so that, only the choice will be I must search testing result by my self... if you have a result from your lab, could you share with me?
Result message after enable captive bypassing configuration.
(Cisco Controller) config>network web-auth captive-bypass enable
Web-auth support for Captive-Bypass will be enabled.
You must reset system for this setting to take effect.

I am having issues with my product code to get my serial number.

I bought a new computer and would like to install on new computer but when I enter my product code it comes up invalid. This is the student mac edition for the CS5 master suite. Any insights would be greatly appreciated. Thanks,

You probably have to talk directly with Adobe on these issues. Here are a couple Adobe sites that deal with activation, and have chat/phone links and numbers
Contact Customer Care
Activation & Deactivation Help

Resolved: Issue with no products showing up for Illustrator 16.1

Dear Adobe Exchange Users,
As mentioned earlier, it had come to our attention that products that have been uploaded to Adobe Exchange don’t show up in in the latest Adobe Illustrator 16.1 version and other later versions of Adobe Creative Suite products.
This issue has been fixed.
Users of the Adobe Exchange panel will be prompted to update the panel for this fix to take effect. Once the panel is updated, please restart your point product to start using the panel.The latest version of the panel is 0.9.1.
Please let us know if there are any issues.
Thanks
**Adobe Exchange Team **

And yes this is not for the MacBook. I am using on dm6446 processor with custom hardware. I could get the AP to work previously with hostapd when i used
driver=rtl871xdrv
but then I compiled with the netlink driver (for some reasons)
driver=nl80211
and now I get two interfaces instead of one (as was with the previous case) wlan1 and mon.wlan1 but no ssid is associated to any of these. I also checked if it was hidden network or something but nothing like that, the ssid just doent seem to be set up. When I start hostapd with the -dd switch in the logs I do see this:
Using interface wlan1 with hwaddr 00:21:2f:3a:b8:fe and ssid 'rtwap'
But iwconfig doesn't give the ssid wiht the interfaces ..

Has anyone seen issues with NI products and Windows XP SP2?

Our IT dept is talking about the above update.
Since I support everything NI produces, I am looking for any issues that may be related.
Thanks in advance for helping me out on this!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Windows XP SP2 is a major update with a lot of changes especially in the area of network security. As most of NI's software products were released before this service pack we haven't been able to test our software with this maintenance release so some issues may exist.
Currently we are testing all of our software products on XP SP2 systems documenting all issues we find in the KnowledgeBase. Please search the KB for the keywords XP SP2.
Currently you should find at least three documented issues there.
Best regards,
Jochen
NI-Germany

Why so many issues with apple products?

Since Apple makes their own hardware and software why are there so many issues? I recently bought a iMac and a iPhone 4 and have had lots of issues just like many of you on the forums. I understand why windows has comptability problems cause they have to make their operating system work for all different computer manufacturers and configurations. But apple does not so what's the deal?

You will probably find that 90% of errors/problems on Macs are caused by 'user error', like introducing incompatible hacks and add-ons.
Moreover, a forum like this is an 'emergency room'. The millions of users who do not have (or may not realise that they have!) problems don't post here.
If you have any problems we would all like to help you iron them out. Just post a question in the specific forum for your model of Mac or version of OS X.

I don't have time to look through answers other users have posted when i have an issue with your product. that's poor technical support. I downloaded the update and now my "go back one page" button doesn't work. you need to improve your support options.

Are you kidding me that your response is I need to create an account?

Call Apple Customer Relations - 1-800-275-2273. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post.
GOOD LUCK!
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.

Production Order Issue with Qty conflict

Hi Friends,
i have a issue with a production order fro which we built the product and the finished goods is moved to storage location, i have status set on my Production order as REL PRT CNF DLV PRC GMPS MACM SETC. My order was for 1unit,In the quantities window , total qty shows as 1 pc and delivered as nothing (blank). Its not active were physically i can change , so how do i add the deliverd qty field by 1.And what could be the issue? PLS help Points will be rewarded.

This Delivered field in CO02-Dates/Qtys tab will get updated automatically , when the order qty is delivered to stock.
We can not manually update that.
Have you checked whether the storage location stock has been increased ? In MMBE , you place the cursor on the stock qty and choose Environment - Production orders or Material Movements and check , whether a GR has been made against this order.
Regards,
Sheik

Issue with printing newly added operations in Production Order through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi,
1) Go to Tcode "OPK8"
2)Select LG02 "Op Control Ticket"
3) Double click on :List Control for Transactions" in the left hand menu tree
4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
Try this.

Issue with Phantom Material in PCE

Hi,
While creating the PCE for one of the finished materials, in the PCE, the phantom material is not getting selected.
There is no issue with the production version or BOM or Master recipe since in the process order after the BOM explosion the phantom material is being picked up.
The costing date of the PCE is also as per the production version validity date. In the BOM & master the phantom item is maintained for costing.
Let me know what else could be missing.
Thanks in advance,
Regards,
Abhijit

There is no problem with the costing run. If a material is marked as a phantom assembly (that is, it has a special procurement type with procurement type: In-house production and special procurement: Phantom assembly ), costing directly explodes the BOM and calculates the planned costs for all material components in the phantom assembly. These material components are displayed and updated in the cost estimate of the higher-level material, but not in the phantom assembly. The idea is, phantom assemblies are not needed to be costed as they are not valuated and neither stock is maintained for them. But their cost structure is exploded properly for the costing run.

Strange Issue with Planning 11.1.2

Hi All,
Recently i've installed Hyperion 11.1.2 and i've noticed a strange issue. I've logged in to workspace as administrator, everything is fine. Now i logged off and then login as a user with role as Planner. He should not see Planning Administrator menu right ? But Planner can also able to see the admin menu. Now i've logged off and cleared all the Cookies, history in the Browser, and login as a user now, it has given the correct message as "Application is in maintenance mode, new logins are not allowed" and unable to see Admin menu now. Why it is happening. Is it really a bug or issue with the browser. Even if there is a issue with Browser, it should not work in this way right ? Pls. advice

I have seen issues with other products in the 11.1.2 line retaining permissions with user login/logout on the same browser.
As John says log a case show them how to replicate and continue forward. Likely 11.1.1.2.1 fixes this and it's know however get the case logged to get it in the pipeline in case you've discovered a new defect.
And going forward you will need to ensure if you are logging in as a high access user on a user desktop to exit all browsers and ensure they are not running in task manager before leaving that pc.
Regards,
John A. Booth
http://www.metavero.com

IE11 Issues with sap portal

Hi,
I am getting compatibility issues in IE11 with SAP portal....I have followed the procedure to set compatibility view(tools-->compatibility view Settings...)..but the issue hasn't been solved.....I am getting this error...the application
was stopped due to critical error rendering....activate compatibility mode....could anybody tell me what are the different ways to activate compatibility mode in IE11
Thanks...

Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question
in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSE: Data Platform & Business Intelligence
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

SVN issue with SDDM 4 Production

Similar Messages

Maybe you are looking for