SW Update Not Working for 5800

Recently I Got Updated to Firmware V50.005,
After Upgrading, SW Update is not working & not at all showing any updates, like it was previously showing update of Mail for Exchange & Nokia Messaging. Also It was showing some Python Updates
Attachments:
Scr000001.jpg ‏30 KB

got the same prob here, python is not installed and no software updates are shown, guess this new firmware has a lot of bugs...

Similar Messages

Adobe Updater not working for CS4

I have installed CS4 Master Collection on a new Windows 7 PC and it is working, but Adobe Updater isn't working properly. It first installed a few updates that were correct, but now it can't find the remaining updates (which I know exist).
The message is "Please note that some updates for the following products cannot be determined at this time," and then it lists most of the products.
I know that CS4 isn't supported any more, but I would have expected Adobe Updater to at least apply the remaining available patches.
I found another thread where it suggested the updates shown depend on the system clock. (http://forums.adobe.com/thread/913379). I set it to earlier and it briefly found the updates, but it seems to cause Adobe Updater to become unstable, so that hasn't worked for me. There was a suggestion that the Adobe certificate may be out of date (thus the System Clock fix works for some), perhaps Adobe needs to update its certificates?
How can I get Adobe Updater to apply remaining patches? Thanks.

update directly, http://www.adobe.com/downloads/updates/

Adobe Updater not working for PSE8

I installed PSE 8 on my laptop and every time I click on "Updates" I get the following error message:
"The update server is not responding, which means it might be offlie at the moment, or the Internet or firewall settings may be incorrect."
I also have Adobe Reader 9 installed on the same computer and the update function works fine for it.
I'm running Windows 7 Home Premium and Norton Internet Security.
I have the same OS and Norton on my desktop computer with PSE 7 and the update function in it works fine.

Check the workaround mentioned in the second post on the below thread. That may solve your problem. Let us know.
http://forums.adobe.com/thread/586346?tstart=0
Regards,
Ankush

New update not working for adobe flash?

Anyone having problems with the new update working for adobe flash?

No problems here with Flash v12.0.0.77
Try this ....
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Not empty the Safari cache.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Try a Flash based video.

Time Capsule update not working for a few MAC addresses

Whenever I update the Timed Access Schedule list of MAC addresses, some of the Wireless MAC Addresses I include go back to unlimited access ("Everyday" "all day") after a while.
In other words, the "update" list configuration is accepted and works for some time; but the filter applied to some of the MAC addresses simply stop working after a while; therefore, those MAC addresses go back to the status of unrestricted access.
This is happening consistently and I am not being able to program some MAC addresses in my local network to follow the schedule I wish (i.e., accessing the network only within previously specified.
Has anyone experienced such a problem? Is that a bug? Any hints on how to solve this?

colinb85 wrote:
For some reason, all of a sudden my ethernet is not working on my time capsule. My wireless is running fine, but my xbox and tv box are not getting any connection. This does not make any sense to me.
Does anyone know what may cause such an issue?
If you restart the TC does it work again?
Check the connectivity leds on both ends if possible.. certainly each port on the TC has small, micro small LED.. is it green when you are plugged in??
You will need to connect a computer and attempt to ping the TC.. see if it passes packets.
How old is the TC? The model number from the rubber foot please.. A1xxx
And also if you can check the log from a computer if there are any issues.

Defer Panel Updates not working for XY graph

I am using an XY Graph in Labview 8.2. I am making a lot of color changes and want to improve execution time by defering the panel updates while changing the colors. I set the VI/Panel/DeferPanelUpdates to true and do the updates. I can see the other controls on the panel are deferred, but the XY graph continues to redraw. I can't see a way to defer the updates separately to the XY Graph.
I am only doing the defers for the color changes, if I defer the initial data input the color changes throw an error,

How about this for a work-around?
After defering the FP update, set the graph invisable then set the plot colors.
Prior to undefering, set the graph visable.
This works for me. Does it help your application?
Ben
Message Edited by Ben on 03-15-2007 06:00 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
set invisable.JPG ‏6 KB

Check for update not working for Patch 2???

I am running 1.0.0.14.67. When I run the Check For Update command it says there are no updates available even though Patch 2 is now on the OTN site. Is there anything I can try other than downloading the whole new zip and migrating my install?
Previously I have successfully used the update centre to install new patches for the various extensions, so I don't think it's a problem with my firewall settings.
Cheers, APC

Ok - one other thing. If you run check for updates, then the front "Help > About " will not change. So this will still show 1.0.0.14.67, but the Extensions tab will change. Can you just confirm that? Check out the screen shot in this FAQ. So the various extensions will show the 15.57 updates if patch 2 is already installed.
As far as I'm aware we do not have the patch set available as a separate bundle. I'll have to wake to for Kris to get in (west coast) before we can check that.
Sue

Logic Studio: Software Update not working for Compressor and can't download

I'm a Logic Studio customer. The 3.0.2 update isn't working from Software Update. I've tried to download the installation file separately, but it looks like you need a Final Cut Studio SN to download. Compressor is part of Logic Studio, so we need to be able to update also - without relying on Software Update. Thanks guys

Hello there Brad,
I was thinking it might be a good idea to delete and re install the iMovie and iPhoto applications from the Mac App store.
First find the apps in your Applications folder in finder, and move them to the trash and restart your computer.
Then use this article to re download them from the Mac App Store.
Mac App Store: Finding your purchased apps
http://support.apple.com/kb/HT4483
Apps purchased via the Mac App Store
When purchased via the Mac App Store, apps are installed in the Applications folder. Icons for purchased apps are automatically placed in the current user's Dock. There is also a purchases tab in the Mac App Store where you can see all of your Mac App Store downloads.
Cheers,
Sterling

Software update NOT WORKING FOR SAFARI

Why Apple doesn't solve this issue, very irritating to go always to Apple website and download from there, any idea to repair this ?
Thanks

Hi Ferro;
As far as I can see Apple doesn't have to fix anything with Software Update because it is working perfectly for myself and the users I help to support.
So maybe if you can give us more details; such as what error messages are you getting, what have you done so far to solve this problem.
Allan

Software update not working for Mountain Lion?

A chunk of my client's office 's still using Mountain Lion -- last week, I ran software update for about half of them, and installed the latest Safari & Security updates.
This week, I went to run Software Update on the other half of them, and no updates are available -- even though they're running Safari 6.1.3 and don't have the latest Security Update.
But the Mavericks macs still get updates available.
Did Apple stop supporting Mountain Lion and I just didn't get the memo?
Message was edited by: macgirldc

macgirldc wrote:
Did Apple stop supporting Mountain Lion and I just didn't get the memo?
No.
iMac (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

Why is the update not working for Pages vs5

I've been updating pages since this morning, its now 6:51pm.
Shouldn't the update process be simple? Where you click on the update and the update happens.
Very confused here!
The software last update was a year ago. I'm currently running OS X 10.8.5 and have updated that to.

Apple's servers are probably very busy. You may want to wait for a little while before trying again.

Software update not working for iPhoto and iMovie

My updates for both iPhoto and iMoive say they can update becasue the app is already loaded and say to check to check app store updates. My iLife came with my my new Mac Mini. Confusing as best.

Hello there Brad,
I was thinking it might be a good idea to delete and re install the iMovie and iPhoto applications from the Mac App store.
First find the apps in your Applications folder in finder, and move them to the trash and restart your computer.
Then use this article to re download them from the Mac App Store.
Mac App Store: Finding your purchased apps
http://support.apple.com/kb/HT4483
Apps purchased via the Mac App Store
When purchased via the Mac App Store, apps are installed in the Applications folder. Icons for purchased apps are automatically placed in the current user's Dock. There is also a purchases tab in the Mac App Store where you can see all of your Mac App Store downloads.
Cheers,
Sterling

HT1222 Why is the update not working for sprint ?

......

Apple's servers are probably very busy. You may want to wait for a little while before trying again.

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

SW Update Not Working for 5800

Similar Messages

Maybe you are looking for