Swaps are marked red in ST02

Swaps are banded red in ST02 how to come out of it. It is showing as below:
program                93,28   240.000      1.253       0,54    60.000     54.069      90,12 79.874  258.846
CUA                    98,93    12.000      1.466      14,62     6.000      5.417      90,28       0      593
Screen                 99,07    10.297      2.027      20,08     2.000      1.742      87,10     218    1.465
Calendar              100,00       488        367      76,78       200         50      25,00       0      150
OTR                   100,00     4.096      3.439     100,00     2.000      2.000     100,00       0
                                                                                0
Tables                                                                                0
  Generic Key          99,86    51.297      2.005       4,02     5.000        285       5,70      49   35.406
  Single record        89,43    18.000      5.092      28,52       500        432      86,40      42   78.837
                                                                                0
Export/import          75,56     8.000        899      12,24     2.000                        23.664
Exp./ Imp. SHM         94,04     4.096      3.248      94,45     2.000      1.999      99,95       0
How do you clear red bands, which memories play the role in this scenario?

You have to increase the parameters.  Doubeclick on the red ones, press on "current parameters" and increase the given values using RZ10.
Your parameters, e. g. abap/buffersize are very small.
Markus

Similar Messages

  • Swaps values showing in RED -TCODE ST02

    Hi All,
    When I checked the ST02 transaction  value of "SWAPS" for program buffer,CUA buffer,screen buffer, Tables generic key buffer and export/import buffer are showing in "RED" colour.
                              (%)           (kb)             %                
    Buffer               Hitratio      Allocated     Free Space    swaps
    Program           99.88         900000        0.36             19541
    CUA                99.9           10,000         1.27             37960
    export/import    94.33         40,000         29.10          750,676
    Swaps value are showing in RED mark....Is there somthing fishy? What can be done to overcome this issue?
    Thanks in advance
    Regards,
    Prashant.

    Dear Prashant,
    SWAP is the amount of page space available at OS level. In case of windows it should not be more than 4 times the ram and in case of UNIX 3 times the ram. If swap or paging is configured high is the paging rate and low is the performance. If there is no more free directory entries are available in the buffer for new objects, old objects are removed and the space is occupied by new objects thus a swapping takes place i.e some buffer content is removed from the buffer and replaced by new buffer contents. High swap is normally a symptom of memory bottleneck.
    Red indicates swaps are to be avoided and indicate that there might be a bottleneck.
    What can be done to overcome this issue?
    You need to increase the parameter then.
    Double-click on the red value, click on "current parameters" and increase that parameter in the instance profile using RZ10. If the parameters are not yet in the profile, add them.
    After changing the instance profile you need to restart the instance.
    Regards,
    Ashutosh

  • Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values)

    Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values).
    Press Ctrl+Shift+O for next error or Press Ctrl+Shift+I for error details
    Please help me, Thank in advance.
    Sravan.

    Hi Sravan, this means that one or more of the fields are required to be filled in or have validation set up on them so that the information entered matches a certain criteria. Make sure what's entered matches what's required. If the form still can't be
    submitted, check the rules set in InfoPath and the list/library to see what's causing the error(s).
    cameron rautmann

  • ST02 SWAPS are more

    Hi,
    Iam new to db tuning . My system shows more SWAPS when i go to ST02 .
    System slow down performanance.SWAPs are showing more.
    Any idea how to resolve this.
    Thanks
    Lisa

    Hi Lisa,
              Lars is very correct.There may be some reasons as
        told by Lars.In order to solve this problem u can follow
        these steps.
      1)Send a session data to SAP by executing tr code "SDCCN"
        or "SDCC".On the basis of this session data SAP will
        send u a Analyzed Early watch report.
                In which u can check whether some programs are
        being swapped frequently.
                       Another reaSON may be low buffer space.
         For this u can increase the size of buffer.
       You can check programs responce time by urself by using
        Tr code ST03.
      Hope this will help you.
      Regards
       Aditya Kumar

  • How to set focus and mark red on certain select option field

    hi experts
    I embedded a select_option view in my application and  tried to use IF_WD_SELECT_OPTIONS->request_focus to set focus on a certain select option field if the logical check failed, and also hope the low field of the select option can be marked red....but things does not happen that way....
    could anyone kindly tell me how to implement that requirement?
    tkx and regards
    sun

    What is the problem you are facing in this ?
    Requesting focus is easy.
    just call the method request focus and pass the id of the parameter whose lower value field you want to focus.
    as shown below.
    code you might have written in wddoinit
    DATA: LT_RANGE_TABLE TYPE REF TO DATA,
            RT_RANGE_TABLE TYPE REF TO DATA,
            READ_ONLY TYPE ABAP_BOOL,
            TYPENAME TYPE STRING.
        DATA: LR_COMPONENTCONTROLLER TYPE REF TO IG_COMPONENTCONTROLLER,
            L_REF_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE.
    *   * create the used component
      L_REF_CMP_USAGE = WD_THIS->WD_CPUSE_SELECT_OPTIONS( ).
      IF L_REF_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
        L_REF_CMP_USAGE->CREATE_COMPONENT( ).
      ENDIF.
        WD_THIS->M_WD_SELECT_OPTIONS = WD_THIS->WD_CPIFC_SELECT_OPTIONS( ).
        WD_THIS->M_HANDLER = WD_THIS->M_WD_SELECT_OPTIONS->INIT_SELECTION_SCREEN( ).
    LT_RANGE_TABLE = WD_THIS->M_HANDLER->CREATE_RANGE_TABLE( I_TYPENAME = 'ZDEALERID' ).
    * * add a new field to the selection
      WD_THIS->M_HANDLER->ADD_SELECTION_FIELD( I_ID = 'ID'
      IT_RESULT = LT_RANGE_TABLE I_READ_ONLY = READ_ONLY ).
    code for focusing a field.
    wd_this->m_handler->request_focus( i_id = 'ID' ).
    you must have declared attributes m_handler and m_wd_select_options type reffering to IF_WD_SELECT_OPTIONS and
    IWCI_WDR_SELECT_OPTIONS respectively.
    and regarding that red color i am not sure it is possible without using message manager.
    thanks
    sarbjeet

  • Pls why when I put my billing address the post code is Mark red as wrong past code and it's the correct billing address??

    I try to pay online payment at apple stores but the postcode is Mark red when the past code is correct I try to pay but it's not accepting the postcode only NN38XA

    Folks in the US  with this recent problem have found that running the address through the ZIP code finder at the USPS website can solve the issue. It seems to be the format. Use the page like you are trying to find the ZIP for the address and then cut & paste the address exactly as the USPS formats it into your account in the iTunes Store.
    http://zip4.usps.com/zip4/welcome.jsp

  • After updating to v. 24.0 (and restarting) ALL add-ons (regardless whether they work or not) are marked "(disabled)", and clicking Enable button does nothing

    After updating to v. 24.0 (and restarting, several times) ALL add-ons (regardless whether they work or not) are marked "(disabled)". I tried clicking "Enable" button for each add-on and nothing happened. There is only one add-on which is marked as incompatible with this version (but it was also incompatible with previous version, and so marked).
    Clicking "Update Add-ons", gives a short list of add-ons but "Install Updates" button is pale and doesn't work. I can only sort list by name or last update.
    Also, I disabled Ask Toolbar and that went well. When I click "Enable" button (button works ONLY for this add-on) it takes forever to get note: “Ask Toolbar will be enabled after you restart Firefox”, I used to get this info in seconds time before this update. (I do not really want Ask Toolbar, I just used it to see whether if I disable and then enable an add-on might do the trick.)
    Bottom line – I can not tell if add-on works (i.e. if it is enabled or disabled) unless I try using it.
    Even when I posted this question and installed Troubleshooter, it's also marked as "(disabled)"

    You're welcome
    Are this screenshots from an extension window because the built-in about:addons page looks different?

  • Front End says: All gateways are marked down

    Hi,
    My Front Ends has started to sing a song like:
    Log Name:      Lync Server
    Source:        LS Outbound Routing
    Event ID:      46046
    Task Category: (1038)
    Level:         Error
    Description:
    A call to a PSTN number failed due to non availability of gateways.
    Called Number: +123456789
    Phone Usage: PSTN1
    Route: Route1
    CallId: 2ce0....
    Cause: All gateways available for this call are marked as down.
    Resolution:
    Verify that these gateways are up and can respond to calls.
    Of course I would like to see how Lync see those statuses. How often they goes down etc..
    Any idea how to see GW statuses? Some performance counter perhaps?
    Petri

    It use SIP OPTIONS for keep alive. If the GW fail to reply to 5 consecutive OPTION requests, Lync server will mark the Gateway as "Down" and it will not send any calls to that gateway here after. Once the Gateway is up, you might need to restart
    the mediation service to make it start chatting again
    http://thamaraw.com

  • How can I unmark photos which are marked for republish to Flickr?

    I am currently using Lightroom 3 to publish photos to Flickr. I have a free Flickr account.
    My problem is that I have a set of photos I am publishing to flickr. For some reason some of my photos lost their keywords, only the files on my computer lost them, the photos on Flickr still have the keywords intact. Also I applied a colour code to a couple of the photos on my hard disk that are being published to Flickr.
    Now Lightroom has detected these changes and the photos appear under 'Modified Photos to repblish' the thing is the changes I made were either putting keywords back in that were already in Flickr anyway, and colour coding which makes no different to flickr. Because I have a free account if I republish the photos I will lose all the comments and stats on Flickr, so I don't want to republish them.
    Whenever I click the publish button I get a warning that republishing the changed photos will lose any information on flickr and I have the option to skip them, and just publish new photos. But if I ever do want to republish a photo I won't be able to do this without also republishing all the photos marked for republish.
    Is there any way I can remove these photos from the republish list?

    All,
    This is an issue with the LR programming, as it does NOT allow you to unmark images it feels need to be republished. Oftentimes it's only a matter of adding a keyword or tweaking the develop settings that triggers this. I for one wish that choice was available.
    Here's what you can do: simply disconnect from the Flickr service. Doing so will have NO detrimental effect on the images in Lightroom or the images you have already uploaded to Flickr. What you will lose, however, is the "library" of images that you have already uploaded to Flickr. Since this is really only a collection there's no harm. Besides, if you need to review which of your images have been uploaded to Flickr at a later time, just reference Flickr. Oh, you'll also lose Lightroom's ability to download any comments your Flickr contacts make on your uploaded images. If it's important for you have that data in Lightroom, rethink the disconnect option. After disconnecting, reconnect using the same parameters you had before. Your Lightroom/Flicker collection will be cleared of all previously uploaded images and you can begin adding new images to upload.
    Again, disconnecting has no effect on your Flickr content. However, if you REMOVE images from the collection using Lightroom, they will also be removed from Flickr. Please understand the distinction between disconnecting from the Service and removal of images using Lightroom.
    All that being said, republishing images from Lightroom to Flickr, in my experience, should not cost you anything in terms of number of views, favorites, comments, etc. It should be seamless.
    Judson Rhodes, Photographer
    www.flickr.com/jrcp/show
    www.judsonr.com
    Date: Tue, 29 Mar 2011 09:43:18 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I unmark photos which are marked for republish to Flickr?
    Hi,
    I'm using LR 3.2 and am having the same issue. I see that no one from Adobe has replied to this and that the previous reply was from August, 2010. There seem to be no answers to this one...
    I have several images that LR feels should be republished, and ONE image that I want to republish. I CAN'T republish just that one image though without republishing ALL the other images.
    Can someone (maybe someone from Adobe) help me with this? How can I simply UNmark the other images to not be republished? I do not want to remove them from the collection, but simply do not want to republish them at this time.
    Why can't Adobe simply ask us if an image should be republished or not? Why can't they allow us to UNmark an image to be republished once it's marked?
    Ideas??  HELP!
    Thanks!
    Steve
    >

  • Documents are marked for indexing but indexing is not happening

    Hi All,
    I have completed the configuration of Trex 7.10 ; and also I have tested the settings by executing the report "RCF_CHECK_SEARCH_SETTINGSu201D in SE38 and found no errors, but the problem here is documents are marked for indexing but not getting indexed.
    I need some help to resolve this issue
    Regards
    Siva

    Hi Siva,
    This should help http://wiki.sdn.sap.com/wiki/x/gQ8oCw

  • HT201272 Redownload songs that are marked as downloaded

    I have automatic download enabled on my itunes, however it appears that not all the tunes downloaded. They are marked as downloaded so i can't redownload them. How do I redownload the songs?

    This really, blatantly doesn't solve the problem. I mean, it even says in the link you gave: iTunes shows you which of your purchases are available for download. You can view all of your past purchases, or just the ones not currently in your iTunes library. Items already in your library aren’t available for download.
    So if you'd bothered to read the question, you'd see that this is exactly the problem SCPayne is having - iTunes claims the songs are in his library when they aren't.
    What's the solution for THAT?

  • How do i unistall last update on imac. my nikon files are turning red, how do i unistall last update on imac. my nikon files are turning red

    my nef files are.turning red in apertutre since latest update. i understand i need to uninstall this . how do i uninstall

    You can undo the RAW Compatibilty Update 4.08 without a time machine backup!
    In Finder go to MacIntosh HD > Systems > Library > Core Services
    In that folder delete the following:
    RawCamera.bundle
    RawCameraSupport.Bundle
    Then download Digital Camera RAW Compatibility Update 4.07 from the Apple suport pages.  Here's the direct link:
    http://support.apple.com/kb/DL1666
    The app store will then be telling you another update is available, meaning 4.08 which screwed us up in the frst place!  Simply ignore the 4.08 update!  Unless you are using one of the cameras listed as being added by 4.08:
         Canon EOS 70D
         Fujifilm X-M1
         Leica M
         Leica M Monochrom
         Nikon COOLPIX P330
         Pentax 645D
         Sony Cyber-shot DSC-RX1R
         Sony Cyber-shot DSC-RX100 II
    By the way, I take no credit for this "solution" - I picked it up in another discussion thread on this subject.
    However, I have been in voice contact with a Senior Support Specialist at Apple Care.  The problem with Update 4.08 removing compatibilty for previously supported Nikon (and possibly other) files has been flagged to Apple's engineering.  

  • Firefox is correcting my (swedish) spelling when I type e-mails, but seems to be correcting it in english, which makes every swedish word marked red?

    Firefox is correcting my spelling when I write (for example) e-mails, but it corrects in English, and I write in Swedish. So every word is marked red. This problem does not occur when I use Safari.
    Have changed to only Swedish in Firefox/Preferences/Content/Languages. Does not work.
    == This happened ==
    Every time Firefox opened
    == All the time

    Hello Linus.
    Check this support article. Hopefully it will help you:
    http://support.mozilla.com/en-US/kb/Using+the+spell+checker

  • Filter out pages that are marked with hideInNav true in the SimpleSearch

    How do I create a SimpleSearch that would not return pages that are marked to be hidden in navigation?

    AFAIK SimpleSearch implementation is for simple fulltext search and can't use it, you need to use either with sql or xpath
    [1]   //element(*, cq:Page)[jcr:content/@hideInNav = 'true']
    [2]    http://<host>:<port>/bin/querybuilder.json?property=jcr%3acontent%2f%40hideInNav&property.value=t rue&type=cq%3aPage

  • In PSE8 when using a selection took, unselected area turns red.

    When using any of the selection tools, the unselected area turns red. How can I correct this?

    Generally that just happens when using one of the Type Mask Tools or you get a red mask when using the Selection Brush Tool
    in mask mode with Add to Selection enabled before starting the mask.
    Could you post a screenshot?

Maybe you are looking for